Add innodb debug system variable, innodb_buffer_pool_load_pages_abort, to test
the behaviour of innodb_buffer_pool_load_incomplete.
(innodb_buufer_pool_dump_abort_loads.test)
Two follow-up tasks were filed for MySQL 5.7.21 changes that
were not applied here:
MDEV-15179 performance_schema.file_instances does not reflect RENAME TABLE
MDEV-14222 Unnecessary 'cascade' memory allocation for every updated
row when there is no FOREIGN KEY
InnoDB RNG maintains global state, causing otherwise unnecessary bus
traffic. Even worse this is cross-mutex traffic. That is different
mutexes suffer from contention.
Fixed delay of 4 was verified to give best throughput by OLTP update
index and read-write benchmarks on Intel Broadwell (2/20/40) and
ARM (1/46/46).
New test cases
innodb-page-cleaners
Modified test cases
innodb_page_cleaners_basic
New function buf_flush_set_page_cleaner_thread_cnt
Increase or decrease the amount of page cleaner worker threads.
In case of increase this function creates based on current
abount and requested amount how many new threads should be
created. In case of decrease this function sets up the
requested amount of threads and uses is_requested event
to signal workers. Then we wait until all new treads
are started, old threads that should exit signal
is_finished or shutdown has marked that page cleaner
should finish.
buf_flush_page_cleaner_worker
Store current thread id and thread_no and then signal
event is_finished. If number of used page cleaner threads
decrease we shut down those threads that have thread_no
greater or equal than number of page configured page
cleaners - 1 (note that there will be always page cleaner
coordinator). Before exiting we signal is_finished.
New function innodb_page_cleaners_threads_update
Update function for innodb-page-cleaners system variable.
innobase_start_or_create_for_mysql
If more than one page cleaner threads is configured
we use new function buf_flush_set_page_cleaner_thread_cnt
to set up the requested threads (-1 coordinator).
The InnoDB purge subsystem can be best stopped by opening a read view,
for example by START TRANSACTION WITH CONSISTENT SNAPSHOT.
To ensure that everything is purged, use wait_all_purged.inc,
which waits for the History list length in SHOW ENGINE INNODB STATUS
to reach 0. Setting innodb_purge_run_now never guaranteed this.
Only a relevant subset of the InnoDB changes was merged.
In particular, two follow-up bug fixes for the bugs that
were introduced in 5.7.18 but not MariaDB 10.2.7 were omitted.
Because MariaDB 10.2.7 omitted the risky change
Bug#23481444 OPTIMISER CALL ROW_SEARCH_MVCC() AND READ THE INDEX
APPLIED BY UNCOMMITTED ROWS
we do not need the follow-up fixes that were introduced in
MySQL 5.6.37 and MySQL 5.7.19:
Bug#25175249 ASSERTION: (TEMPL->IS_VIRTUAL && !FIELD) || ...
Bug#25793677 INNODB: FAILING ASSERTION: CLUST_TEMPL_FOR_SEC || LEN
The following options will be removed:
innodb_file_format
innodb_file_format_check
innodb_file_format_max
innodb_large_prefix
They have been deprecated in MySQL 5.7.7 (and MariaDB 10.2.2) in WL#7703.
The file_format column in two INFORMATION_SCHEMA tables will be removed:
innodb_sys_tablespaces
innodb_sys_tables
Code to update the file format tag at the end of page 0:5
(TRX_SYS_PAGE in the InnoDB system tablespace) will be removed.
When initializing a new database, the bytes will remain 0.
All references to the Barracuda file format will be removed.
Some references to the Antelope file format (meaning
ROW_FORMAT=REDUNDANT or ROW_FORMAT=COMPACT) will remain.
This basically ports WL#7704 from MySQL 8.0.0 to MariaDB 10.3.1:
commit 4a69dc2a95995501ed92d59a1de74414a38540c6
Author: Marko Mäkelä <marko.makela@oracle.com>
Date: Wed Mar 11 22:19:49 2015 +0200
Significantly reduce the amount of InnoDB, XtraDB and Mariabackup
code changes by defining pfs_os_file_t as something that is
transparently compatible with os_file_t.
Simplify the tests that are present in MySQL 5.7. Make the table
smaller while generating enough undo log. Do not unnecessarily
drop tables.
trx_purge_initiate_truncate(): Remove two crash injection points
(before and after normal redo log checkpoint), because they are
not adding any value. Clarify some messages.
trx_sys_create_rsegs(): Display the number of active undo tablespaces.
srv_undo_tablespaces_init(): When initializing the data files, do not
leave srv_undo_tablespaces_active at 0.
Do not display that number; let trx_sys_create_rsegs() display it once
the final number is known.
innodb_params_adjust(): Adjust parameters after startup.
innobase_init(): Do not allow innodb_max_undo_size to be less
than SRV_UNDO_TABLESPACE_SIZE_IN_PAGES. This avoids unnecessary
repeated truncation of undo tablespaces when using
innodb_page_size=32k or innodb_page_size=64k.
MySQL 5.7 reduced the maximum number of innodb_undo_tablespaces
from 126 to 95 when it reserved 32 persistent rollback segments
for the temporary undo logs. Since MDEV-12289 restored all 128
persistent rollback segments for persistent undo logs, the
reasonable maximum value of innodb_undo_tablespaces is 127
(not 126 or 95). This is because out of the 128 rollback segments,
the first one will always be created in the system tablespace
and the remaining ones can be created in dedicated undo tablespaces.
Extended syntax so that it is now possible to set lock_wait_timeout for the
following statements:
SELECT ... FOR UPDATE [WAIT n|NOWAIT]
SELECT ... LOCK IN SHARED MODE [WAIT n|NOWAIT]
LOCK TABLE ... [WAIT n|NOWAIT]
CREATE ... INDEX ON tbl_name (index_col_name, ...) [WAIT n|NOWAIT] ...
ALTER TABLE tbl_name [WAIT n|NOWAIT] ...
OPTIMIZE TABLE tbl_name [WAIT n|NOWAIT]
DROP INDEX ... [WAIT n|NOWAIT]
TRUNCATE TABLE tbl_name [WAIT n|NOWAIT]
RENAME TABLE tbl_name [WAIT n|NOWAIT] ...
DROP TABLE tbl_name [WAIT n|NOWAIT] ...
Valid range of lock_wait_timeout and innodb_lock_wait_timeout was extended so
that 0 is acceptable value (means no wait).
This is amended AliSQL patch. We prefer Oracle syntax for [WAIT n|NOWAIT]
instead of original [WAIT [n]|NO_WAIT].
MDEV-11581: Mariadb starts InnoDB encryption threads
when key has not changed or data scrubbing turned off
Background: Key rotation is based on background threads
(innodb-encryption-threads) periodically going through
all tablespaces on fil_system. For each tablespace
current used key version is compared to max key age
(innodb-encryption-rotate-key-age). This process
naturally takes CPU. Similarly, in same time need for
scrubbing is investigated. Currently, key rotation
is fully supported on Amazon AWS key management plugin
only but InnoDB does not have knowledge what key
management plugin is used.
This patch re-purposes innodb-encryption-rotate-key-age=0
to disable key rotation and background data scrubbing.
All new tables are added to special list for key rotation
and key rotation is based on sending a event to
background encryption threads instead of using periodic
checking (i.e. timeout).
fil0fil.cc: Added functions fil_space_acquire_low()
to acquire a tablespace when it could be dropped concurrently.
This function is used from fil_space_acquire() or
fil_space_acquire_silent() that will not print
any messages if we try to acquire space that does not exist.
fil_space_release() to release a acquired tablespace.
fil_space_next() to iterate tablespaces in fil_system
using fil_space_acquire() and fil_space_release().
Similarly, fil_space_keyrotation_next() to iterate new
list fil_system->rotation_list where new tables.
are added if key rotation is disabled.
Removed unnecessary functions fil_get_first_space_safe()
fil_get_next_space_safe()
fil_node_open_file(): After page 0 is read read also
crypt_info if it is not yet read.
btr_scrub_lock_dict_func()
buf_page_check_corrupt()
buf_page_encrypt_before_write()
buf_merge_or_delete_for_page()
lock_print_info_all_transactions()
row_fts_psort_info_init()
row_truncate_table_for_mysql()
row_drop_table_for_mysql()
Use fil_space_acquire()/release() to access fil_space_t.
buf_page_decrypt_after_read():
Use fil_space_get_crypt_data() because at this point
we might not yet have read page 0.
fil0crypt.cc/fil0fil.h: Lot of changes. Pass fil_space_t* directly
to functions needing it and store fil_space_t* to rotation state.
Use fil_space_acquire()/release() when iterating tablespaces
and removed unnecessary is_closing from fil_crypt_t. Use
fil_space_t::is_stopping() to detect when access to
tablespace should be stopped. Removed unnecessary
fil_space_get_crypt_data().
fil_space_create(): Inform key rotation that there could
be something to do if key rotation is disabled and new
table with encryption enabled is created.
Remove unnecessary functions fil_get_first_space_safe()
and fil_get_next_space_safe(). fil_space_acquire()
and fil_space_release() are used instead. Moved
fil_space_get_crypt_data() and fil_space_set_crypt_data()
to fil0crypt.cc.
fsp_header_init(): Acquire fil_space_t*, write crypt_data
and release space.
check_table_options()
Renamed FIL_SPACE_ENCRYPTION_* TO FIL_ENCRYPTION_*
i_s.cc: Added ROTATING_OR_FLUSHING field to
information_schema.innodb_tablespace_encryption
to show current status of key rotation.
Because the default build configuration of the server will remain
at -DWITH_INNODB_AHI=ON, we want to test the instrumentation.
We make and revert the test adjustments in separate commits on purpose,
so that this commit can be easily reverted later if the default
build configuration is changed to -DWITH_INNODB_AHI=OFF.
The InnoDB adaptive hash index is sometimes degrading the performance of
InnoDB, and it is sometimes disabled to get more consistent performance.
We should have a compile-time option to disable the adaptive hash index.
Let us introduce two options:
OPTION(WITH_INNODB_AHI "Include innodb_adaptive_hash_index" ON)
OPTION(WITH_INNODB_ROOT_GUESS "Cache index root block descriptors" ON)
where WITH_INNODB_AHI always implies WITH_INNODB_ROOT_GUESS.
As part of this change, the misleadingly named function
trx_search_latch_release_if_reserved(trx) will be replaced with the macro
trx_assert_no_search_latch(trx) that will be empty unless
BTR_CUR_HASH_ADAPT is defined (cmake -DWITH_INNODB_AHI=ON).
We will also remove the unused column
INFORMATION_SCHEMA.INNODB_TRX.TRX_ADAPTIVE_HASH_TIMEOUT.
In MariaDB Server 10.1, it used to reflect the value of
trx_t::search_latch_timeout which could be adjusted during
row_search_for_mysql(). In 10.2, there is no such field.
Other than the removal of the unused column TRX_ADAPTIVE_HASH_TIMEOUT,
this is an almost non-functional change to the server when using the
default build options.
Some tests are adjusted so that they will work with both
-DWITH_INNODB_AHI=ON and -DWITH_INNODB_AHI=OFF. The test
innodb.innodb_monitor has been renamed to innodb.monitor
in order to track MySQL 5.7, and the duplicate tests
sys_vars.innodb_monitor_* are removed.
MDEV-7618 introduced configuration parameter innodb_instrument_semaphores
in MariaDB Server 10.1. The parameter seems to only affect the rw-lock
X-latch acquisition. Extra fields are added to rw_lock_t to remember one
X-latch holder or waiter. These fields are not being consulted or reported
anywhere. This is basically only adding code bloat.
If the intention is to debug hangs or deadlocks, we have better tools for
that in the debug server, and for the non-debug server, core dumps can
reveal a lot. For example, the mini-transaction memo records the
currently held buffer block or index rw-locks, to be released at
mtr_t::commit().
The configuration parameter innodb_instrument_semaphores will be
deprecated in 10.2.5 and removed in 10.3.0.
rw_lock_t: Remove the members lock_name, file_name, line, thread_id
which did not affect any output.
The InnoDB redo log consists of a list of files that logically form
a bigger file, as if the individual files were concatenated together.
The first file will always be written on redo log checkpoint, because
the two checkpoint pages are at the start of the single logical
redo log file.
There is no technical reason why InnoDB requires at least 2 files
to exist. Let us reduce the minimum number to 1. In that way,
restoring from backups will become easier, since InnoDB can directly
deal with a single backed-up redo log file.
Oracle introduced a Memcached plugin interface to the InnoDB
storage engine in MySQL 5.6. That interface is essentially a
fork of Memcached development snapshot 1.6.0-beta1 of an old
development branch 'engine-pu'.
To my knowledge, there have not been any updates to the Memcached code
between MySQL 5.6 and 5.7; only bug fixes and extensions related to
the Oracle modifications.
The Memcached plugin is not part of the MariaDB Server. Therefore it
does not make sense to include the InnoDB interfaces for the Memcached
plugin, or to have any related configuration parameters:
innodb_api_bk_commit_interval
innodb_api_disable_rowlock
innodb_api_enable_binlog
innodb_api_enable_mdl
innodb_api_trx_level
Removing this code in one commit makes it possible to easily restore
it, in case it turns out to be needed later.
Remove the debug parameter innodb_force_recovery_crash that was
introduced into MySQL 5.6 by me in WL#6494 which allowed InnoDB
to resize the redo log on startup.
Let innodb.log_file_size actually start up the server, but ensure
that the InnoDB storage engine refuses to start up in each of the
scenarios.
