The fix is to return 3-state value from Range_rowid_filter::build()
call:
1. The filter was built successfully;
2. The filter was not built, but the error was not fatal, i.e. there is
no need to rollback transaction. For example, if the size of container to
storevrow ids is not enough;
3. The filter was not built because of fatal error, for example,
deadlock or lock wait timeout from storage engine. In this case we
should stop query plan execution and roll back transaction.
Reviewed by: Sergey Petrunya
There was no actual execution of the SQL of a pushed derived table,
which caused "r_rows" to be always displayed as 0 and "r_total_time_ms"
to show inaccurate numbers.
This commit makes a derived table SQL to be executed by the storage
engine, so the server is able to calculate the number of rows returned
and measure the execution time more accurately
The code in choose_best_splitting() assumed that the join prefix is
in join->positions[].
This is not necessarily the case. This function might be called when
the join prefix is in join->best_positions[], too.
Follow the approach from best_access_path(), which calls this function:
pass the current join prefix as an argument,
"const POSITION *join_positions" and use that.
The problem was trying to access JOIN_TAB::select which is set to NULL
when using the filesort. The correct way is accessing either
JOIN_TAB::select or JOIN_TAB::filesort->select depending on whether
the filesort is used.
This commit introduces member function JOIN_TAB::get_sql_select()
encapsulating that check so the code duplication is eliminated.
The new condition (s->table->quick_keys.is_set(best_key->key))
was added to best_access_path() to eliminate a Valgrind error.
The cause of that error was using TRASH_ALLOC(quick_key_parts)
instead of bzero(quick_key_parts); hence, accessing
s->table->quick_key_parts[best_key->key]) without prior checking
for quick_keys.is_set() might have caused reading "dirty" memory
The problem was that join_buffer_size conflicted with
join_buffer_space_limit, which caused the query to be run without join
buffer. However this caused wrong results as the optimizer assumed
that hash+join buffer would ensure that the equi-join condition
would be satisfied, and didn't check it itself.
Fixed by not using join_buffer_space_limit when
optimize_join_buffer_size=off. This matches the documentation at
https://mariadb.com/kb/en/block-based-join-algorithms
Other things:
- Removed not used variable JOIN_TAB::join_buffer_size_limit
- Give an error if we cannot allocate a join buffer. This can
only happen if the join_buffer variables are wrongly configured or
we are running out of memory.
In the future, instead of returning an error, we could properly
convert the query plan that uses BNL-H join into one that doesn't
use join buffering:
make sure the equi-join condition is checked where appropriate.
Reviewer: Sergei Petrunia <sergey@mariadb.com>
This patch optimizes the number of refills for the lateral derived table
to which a materialized derived table subject to split optimization is
is converted. This optimized number of refills is now considered as the
expected number of refills of the materialized derived table when searching
for the best possible splitting of the table.
When a query does implicit grouping and join operation produces an empty
result set, a NULL-complemented row combination is generated.
However, constant table fields still show non-NULL values.
What happens in the is that end_send_group() is called with a
const row but without any rows matching the WHERE clause.
This last part is shown by 'join->first_record' not being set.
This causes item->no_rows_in_result() to be called for all items to reset
all sum functions to their initial state. However fields are not set
to NULL.
The used fix is to produce NULL-complemented records for constant tables
as well. Also, reset the constant table's records back in case we're
in a subquery which may get re-executed.
An alternative fix would have item->no_rows_in_result() also work
with Item_field objects.
There is some other issues with the code:
- join->no_rows_in_result_called is used but never set.
- Tables that are used with group functions are not properly marked as
maybe_null, which is required if the table rows should be regarded as
null-complemented (not existing).
- The code that tries to detect if mixed_implicit_grouping should be set
didn't take into account all usage of fields and sum functions.
- Item_func::restore_to_before_no_rows_in_result() called the wrong
function.
- join->clear() does not use a table_map argument to clear_tables(),
which caused it to ignore constant tables.
- unclear_tables() does not correctly restore status to what is
was before clear_tables().
Main bug fix was to always use a table_map argument to clear_tables() and
always use join->clear() and clear_tables() together with unclear_tables().
Other fixes:
- Fixed Item_func::restore_to_before_no_rows_in_result()
- Set 'join->no_rows_in_result_called' when no_rows_in_result_set()
is called.
- Removed not used argument from setup_end_select_func().
- More code comments
- Ensure that end_send_group() modifies the same fields as are in the
result set.
- Changed return_zero_rows() to use pointers instead of references,
similar to the rest of the code.
This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
Deallocation of TABLE_LIST::dt_handler and TABLE_LIST::pushdown_derived
was performed in multiple places if code. This not only made the code
more difficult to maintain but also led to memory leaks and
ASAN heap-use-after-free errors.
This commit puts deallocation of TABLE_LIST::dt_handler and
TABLE_LIST::pushdown_derived to the single point - JOIN::cleanup()
The problem was caused by use of COLLATION(AVG('x')). This is an
item whose value is a constant.
Name Resolution code called convert_const_to_int() which removed AVG('x').
However, the item representing COLLATION(...) still had with_sum_func=1.
This inconsistent state confused the code that handles grouping and
DISTINCT: JOIN::get_best_combination() decided to use one temporary
table and allocated one JOIN_TAB for it, but then
JOIN::make_aggr_tables_info() attempted to use two and made writes
beyond the end of the JOIN::join_tab array.
The fix:
- Do not replace constant expressions which contain aggregate functions.
- Add JOIN::dbug_join_tab_array_size to catch attempts to use more
JOIN_TAB objects than we've allocated.
1. For INSERT..SELECT statements: don't include table/view the data
is inserted into in the list of leaf tables
2. Remove duplicated and dead code related to table_count
(Try 2) (Cherry-pick back into 10.3)
The code that updates semi-join optimization state for a join order prefix
had several bugs. The visible effect was bad optimization for FirstMatch or
LooseScan strategies: they either weren't considered when they should have
been, or considered when they shouldn't have been.
In order to hit the bug, the optimizer needs to consider several different
join prefixes in a certain order. Queries with "obvious" query plans which
prune all join orders except one are not affected.
Internally, the bugs in updates of semi-join state were:
1. restore_prev_sj_state() assumed that
"we assume remaining_tables doesnt contain @tab"
which wasn't true.
2. Another bug in this function: it did remove bits from
join->cur_sj_inner_tables but never added them.
3. greedy_search() adds tables into the join prefix but neglects to update
the semi-join optimization state. (It does update nested outer join
state, see this call:
check_interleaving_with_nj(best_table)
but there's no matching call to update the semi-join state.
(This wasn't visible because most of the state is in the POSITION
structure which is updated. But there is also state in JOIN, too)
The patch:
- Fixes all of the above
- Adds JOIN::dbug_verify_sj_inner_tables() which is used to verify the
state is correct at every step.
- Renames advance_sj_state() to optimize_semi_joins().
= Introduces update_sj_state() which ideally should have been called
"advance_sj_state" but I didn't reuse the name to not create confusion.
(This is the assert that was added in fix for MDEV-26047)
Table elimination may remove an ON expression from an outer join.
However SELECT_LEX::update_used_tables() will still call
item->walk(&Item::eval_not_null_tables)
for eliminated expressions. If the subquery is constant and cheap
Item_cond_and will attempt to evaluate it, which will trigger an
assert.
The fix is not to call update_used_tables() or eval_not_null_tables()
for ON expressions that were eliminated.
This bug may affect the queries that uses a grouping derived table with
grouping list containing references to columns from different tables if
the optimizer decides to employ the split optimization for the derived
table. In some very specific cases it may affect queries with a grouping
derived table that refers only one base table.
This bug was caused by an improper fix for the bug MDEV-25128. The fix
tried to get rid of the equality conditions pushed into the where clause
of the grouping derived table T to which the split optimization had been
applied. The fix erroneously assumed that only those pushed equalities
that were used for ref access of the tables referenced by T were needed.
In fact the function remove_const() that figures out what columns from the
group list can be removed if the split optimization is applied can uses
other pushed equalities as well.
This patch actually provides a proper fix for MDEV-25128. Rather than
trying to remove invalid pushed equalities referencing the fields of SJM
tables with a look-up access the patch attempts not to push such equalities.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
The problem was caused by the following scenario:
Subquery's table has two indexes, KEY a(a), KEY a_b(a,b)
- LATERAL DERIVED optimization decides to use index a.
= The subquery uses ref access over key a.
- test_if_skip_sort_order() sees that KEY a_b satisfies the
subquery's GROUP BY clause, and attempts to switch to it.
= It fails to do so, because KEYUSE objects for index a_b
are switched off.
Fixed by disallowing to change the ref access key if it uses KEYUSE
objects injected by LATERAL DERIVED optimization.
The easiest way to compile and test the server with UBSAN is to run:
./BUILD/compile-pentium64-ubsan
and then run mysql-test-run.
After this commit, one should be able to run this without any UBSAN
warnings. There is still a few compiler warnings that should be fixed
at some point, but these do not expose any real bugs.
The 'special' cases where we disable, suppress or circumvent UBSAN are:
- ref10 source (as here we intentionally do some shifts that UBSAN
complains about.
- x86 version of optimized int#korr() methods. UBSAN do not like unaligned
memory access of integers. Fixed by using byte_order_generic.h when
compiling with UBSAN
- We use smaller thread stack with ASAN and UBSAN, which forced me to
disable a few tests that prints the thread stack size.
- Verifying class types does not work for shared libraries. I added
suppression in mysql-test-run.pl for this case.
- Added '#ifdef WITH_UBSAN' when using integer arithmetic where it is
safe to have overflows (two cases, in item_func.cc).
Things fixed:
- Don't left shift signed values
(byte_order_generic.h, mysqltest.c, item_sum.cc and many more)
- Don't assign not non existing values to enum variables.
- Ensure that bool and enum values are properly initialized in
constructors. This was needed as UBSAN checks that these types has
correct values when one copies an object.
(gcalc_tools.h, ha_partition.cc, item_sum.cc, partition_element.h ...)
- Ensure we do not called handler functions on unallocated objects or
deleted objects.
(events.cc, sql_acl.cc).
- Fixed bugs in Item_sp::Item_sp() where we did not call constructor
on Query_arena object.
- Fixed several cast of objects to an incompatible class!
(Item.cc, Item_buff.cc, item_timefunc.cc, opt_subselect.cc, sql_acl.cc,
sql_select.cc ...)
- Ensure we do not do integer arithmetic that causes over or underflows.
This includes also ++ and -- of integers.
(Item_func.cc, Item_strfunc.cc, item_timefunc.cc, sql_base.cc ...)
- Added JSON_VALUE_UNITIALIZED to json_value_types and ensure that
value_type is initialized to this instead of to -1, which is not a valid
enum value for json_value_types.
- Ensure we do not call memcpy() when second argument could be null.
- Fixed that Item_func_str::make_empty_result() creates an empty string
instead of a null string (safer as it ensures we do not do arithmetic
on null strings).
Other things:
- Changed struct st_position to an OBJECT and added an initialization
function to it to ensure that we do not copy or use uninitialized
members. The change to a class was also motived that we used "struct
st_position" and POSITION randomly trough the code which was
confusing.
- Notably big rewrite in sql_acl.cc to avoid using deleted objects.
- Changed in sql_partition to use '^' instead of '-'. This is safe as
the operator is either 0 or 0x8000000000000000ULL.
- Added check for select_nr < INT_MAX in JOIN::build_explain() to
avoid bug when get_select() could return NULL.
- Reordered elements in POSITION for better alignment.
- Changed sql_test.cc::print_plan() to use pointers instead of objects.
- Fixed bug in find_set() where could could execute '1 << -1'.
- Added variable have_sanitizer, used by mtr. (This variable was before
only in 10.5 and up). It can now have one of two values:
ASAN or UBSAN.
- Moved ~Archive_share() from ha_archive.cc to ha_archive.h and marked
it virtual. This was an effort to get UBSAN to work with loaded storage
engines. I kept the change as the new place is better.
- Added in CONNECT engine COLBLK::SetName(), to get around a wrong cast
in tabutil.cpp.
- Added HAVE_REPLICATION around usage of rgi_slave, to get embedded
server to compile with UBSAN. (Patch from Marko).
- Added #ifdef for powerpc64 to avoid a bug in old gcc versions related
to integer arithmetic.
Changes that should not be needed but had to be done to suppress warnings
from UBSAN:
- Added static_cast<<uint16_t>> around shift to get rid of a LOT of
compiler warnings when using UBSAN.
- Had to change some '/' of 2 base integers to shift to get rid of
some compile time warnings.
Reviewed by:
- Json changes: Alexey Botchkov
- Charset changes in ctype-uca.c: Alexander Barkov
- InnoDB changes & Embedded server: Marko Mäkelä
- sql_acl.cc changes: Vicențiu Ciorbaru
- build_explain() changes: Sergey Petrunia
The assertion failed in handler::ha_reset upon SELECT under
READ UNCOMMITTED from table with index on virtual column.
This was the debug-only failure, though the problem is mush wider:
* MY_BITMAP is a structure containing my_bitmap_map, the latter is a raw
bitmap.
* read_set, write_set and vcol_set of TABLE are the pointers to MY_BITMAP
* The rest of MY_BITMAPs are stored in TABLE and TABLE_SHARE
* The pointers to the stored MY_BITMAPs, like orig_read_set etc, and
sometimes all_set and tmp_set, are assigned to the pointers.
* Sometimes tmp_use_all_columns is used to substitute the raw bitmap
directly with all_set.bitmap
* Sometimes even bitmaps are directly modified, like in
TABLE::update_virtual_field(): bitmap_clear_all(&tmp_set) is called.
The last three bullets in the list, when used together (which is mostly
always) make the program flow cumbersome and impossible to follow,
notwithstanding the errors they cause, like this MDEV-17556, where tmp_set
pointer was assigned to read_set, write_set and vcol_set, then its bitmap
was substituted with all_set.bitmap by dbug_tmp_use_all_columns() call,
and then bitmap_clear_all(&tmp_set) was applied to all this.
To untangle this knot, the rule should be applied:
* Never substitute bitmaps! This patch is about this.
orig_*, all_set bitmaps are never substituted already.
This patch changes the following function prototypes:
* tmp_use_all_columns, dbug_tmp_use_all_columns
to accept MY_BITMAP** and to return MY_BITMAP * instead of my_bitmap_map*
* tmp_restore_column_map, dbug_tmp_restore_column_maps to accept
MY_BITMAP* instead of my_bitmap_map*
These functions now will substitute read_set/write_set/vcol_set directly,
and won't touch underlying bitmaps.
The assertion failed in handler::ha_reset upon SELECT under
READ UNCOMMITTED from table with index on virtual column.
This was the debug-only failure, though the problem is mush wider:
* MY_BITMAP is a structure containing my_bitmap_map, the latter is a raw
bitmap.
* read_set, write_set and vcol_set of TABLE are the pointers to MY_BITMAP
* The rest of MY_BITMAPs are stored in TABLE and TABLE_SHARE
* The pointers to the stored MY_BITMAPs, like orig_read_set etc, and
sometimes all_set and tmp_set, are assigned to the pointers.
* Sometimes tmp_use_all_columns is used to substitute the raw bitmap
directly with all_set.bitmap
* Sometimes even bitmaps are directly modified, like in
TABLE::update_virtual_field(): bitmap_clear_all(&tmp_set) is called.
The last three bullets in the list, when used together (which is mostly
always) make the program flow cumbersome and impossible to follow,
notwithstanding the errors they cause, like this MDEV-17556, where tmp_set
pointer was assigned to read_set, write_set and vcol_set, then its bitmap
was substituted with all_set.bitmap by dbug_tmp_use_all_columns() call,
and then bitmap_clear_all(&tmp_set) was applied to all this.
To untangle this knot, the rule should be applied:
* Never substitute bitmaps! This patch is about this.
orig_*, all_set bitmaps are never substituted already.
This patch changes the following function prototypes:
* tmp_use_all_columns, dbug_tmp_use_all_columns
to accept MY_BITMAP** and to return MY_BITMAP * instead of my_bitmap_map*
* tmp_restore_column_map, dbug_tmp_restore_column_maps to accept
MY_BITMAP* instead of my_bitmap_map*
These functions now will substitute read_set/write_set/vcol_set directly,
and won't touch underlying bitmaps.
The issue here is when records are read from the temporary file
(filesort result in this case) via a cache(rr_from_cache).
The cache is initialized with init_rr_cache.
For correlated subquery the cache allocation is happening at each execution
of the subquery but the deallocation happens only once and that was
when the query execution was done.
So generally for subqueries we do two types of cleanup
1) Full cleanup: we should free all resources of the query(like temp tables).
This is done generally when the query execution is complete or the subquery
re-execution is not needed (case with uncorrelated subquery)
2) Partial cleanup: Minor cleanup that is required if
the subquery needs recalculation. This is done for all the structures that
need to be allocated for each execution (example SORT_INFO for filesort
is allocated for each execution of the correlated subquery).
The fix here would be free the cache used by rr_from_cache in the partial
cleanup phase.
A temporary table is needed for window function computation but if only a NAMED WINDOW SPEC
is used and there is no window function, then there is no need to create a temporary
table as there is no stage to compute WINDOW FUNCTION
The issue here is for degenerate joins we should execute the window
function but it is not getting executed in all the cases.
To get the window function values window function needs to be executed
always. This currently does not happen in few cases
where the join would return 0 or 1 row like
1) IMPOSSIBLE WHERE
2) MIN/MAX optimization
3) EMPTY CONST TABLE
The fix is to make sure that window functions get executed
and the temporary table is setup for the execution of window functions
best_access_path() is called from two optimization phases:
1. Plan choice phase, in choose_plan(). Here, the join prefix being
considered is in join->positions[]
2. Plan refinement stage, in fix_semijoin_strategies_for_picked_join_order
Here, the join prefix is in join->best_positions[]
It used to access join->positions[] from stage #2. This didnt cause any
valgrind or asan failures (as join->positions[] has been written-to before)
but the effect was similar to that of reading the random data:
The join prefix we've picked (in join->best_positions) could have
nothing in common with the join prefix that was last to be considered
(in join->positions).
