Due to a premature cleanup of the unit that specified a recursive CTE
used in the second operand of union the server fell into an infinite
loop in the reported test case. In other cases this premature cleanup
could cause other problems.
The bug is the result of a not quite correct fix for MDEV-17024. The
unit that specifies a recursive CTE has to be cleaned only after the
cleanup of the last external reference to this CTE. It means that
cleanups of the unit triggered not by the cleanup of a external
reference to the CTE must be blocked.
Usage of local table chains in selects to get external references to
recursive CTEs was not correct either because of possible merges of
some selects.
Also fixed a minor bug in st_select_lex::set_explain_type() that caused
typing 'RECURSIVE UNION' instead of 'UNION' in EXPLAIN output for external
references to a recursive CTE.
This follows up commit
commit 94a520ddbe and
commit 7c5519c12d.
After these changes, the default test suites on a
cmake -DWITH_UBSAN=ON build no longer fail due to passing
null pointers as parameters that are declared to never be null,
but plenty of other runtime errors remain.
Reimplement MDEV-14275 Improving memory utilization for information schema
Postpone temp table instantiation until after setup_fields().
Replace all unused (not marked in read_set) columns in an I_S table
with CHAR(0). This can drastically reduce the footprint of a MEMORY
table (a TABLE_CATALOG alone is 1538 bytes per row).
This does not change the engine. If the table was decided to be Aria
(because of, say, blobs) then after optimization it'll stay Aria
even if all blobs were removed.
Note 1: when transforming table structure, share->blob_fields is
preserved, otherwise Aria might switch from DYNAMIC to STATIC row format
and expect a special field for a deleted mark, which create_tmp_tabe
didn't provide.
Note 2: optimizer was doing handler::info() (to know the number of rows)
before the temp table is populated. That didn't make much sense. Now
it's done before the table is even instantiated. Preserve the old
behavior and report 0 rows.
This reverts e2664ee836 and a8458a2345
PARTITION clause in SELECT means query is non-versioned (see
WITH_PARTITION_STORAGE_ENGINE in vers_setup_conds()).
vers_setup_conds() expands such query to SYSTEM_TIME_ALL which is then
added to VIEW specification. When VIEW is queried both clauses
PARTITION and FOR SYSTEM_TIME ALL lead to ER_VERS_QUERY_IN_PARTITION
(same place WITH_PARTITION_STORAGE_ENGINE).
Fix removes FOR SYSTEM_TIME ALL from VIEW by accessing original
SYSTEM_TIME clause: the one specified in parser. As a side-effect
EXPLAIN SELECT displays SYSTEM_TIME specified in SELECT which is
user-friendly.
For join to work correctly versioning condition must be added to table
on_expr. Without that JOIN_CACHE gets expression (1)
trigcond(xtitle.row_end = TIMESTAMP'2038-01-19 06:14:07.999999') and
trigcond(xtitle.elementId = x.`id` and xtitle.pkey = 'title')
instead of (2)
trigcond(xtitle.elementId = x.`id` and xtitle.pkey = 'title')
for join_null_complements(). It is NULL-row of xtitle for
complementing the join and the above comparisons of course FALSE, but
trigcond (Item_func_trig_cond) makes them TRUE via its trig_var
property which is bound to some boolean properties of JOIN_TAB.
Expression (2) evaluated to TRUE because its trig_var is bound to
first_inner_tab->not_null_compl. The expression (1) does not evaluate
correctly because row_end comparison's trig_var is bound to
first_inner->found earlier. As a result JOIN_CACHE::check_match()
skipped the row for join_null_complements().
When we add versioning condition to table's on_expr the optimizer in
make_join_select() distributes conditions differently. tmp_cond
inherits on_expr value and in Good case it is full expression
xgender.elementId = x.`id` and xgender.pkey = 'gender' and
xgender.row_end = TIMESTAMP'2038-01-19 06:14:07.999999'
while in Bad case it is only
xgender.elementId = x.`id` and xgender.pkey = 'gender'.
Later in Good row_end condition is optimized out and we get one
trigcond in form of (2).
Diagnostics_area::set_error_status
Analysis: When strict mode is enabled, all warnings are converted to errors
including those which do not occur because of bad data.
Fix: Query should not be aborted when we have warning because limit to
examine rows was reached because it doesn't happen due to bad data.
So thd->abort_on_warning should be false.
The issue here was that the query was using ORDER BY LIMIT optimzation where
the access method was changed from EQ_REF access to an index scan (index that would
resolve the ORDER BY clause).
But the parameter READ_RECORD::unlock_row was not reset to rr_unlock_row, which is
used when the access method is not EQ_REF access.
Problem:
Queries like this showed performance degratation in 10.4 over 10.3:
SELECT temporal_literal FROM t1;
SELECT temporal_literal + 1 FROM t1;
SELECT COUNT(*) FROM t1 WHERE temporal_column = temporal_literal;
SELECT COUNT(*) FROM t1 WHERE temporal_column = string_literal;
Fix:
Replacing the universal member "MYSQL_TIME cached_time" in
Item_temporal_literal to data type specific containers:
- Date in Item_date_literal
- Time in Item_time_literal
- Datetime in Item_datetime_literal
This restores the performance, and make it even better in some cases.
See benchmark results in MDEV.
Also, this change makes futher separations of Date, Time, Datetime
from each other, which will make it possible not to derive them from
a too heavy (40 bytes) MYSQL_TIME, and replace them to smaller data
type specific containers.
The issue here is when records are read from the temporary file
(filesort result in this case) via a cache(rr_from_cache).
The cache is initialized with init_rr_cache.
For correlated subquery the cache allocation is happening at each execution
of the subquery but the deallocation happens only once and that was
when the query execution was done.
So generally for subqueries we do two types of cleanup
1) Full cleanup: we should free all resources of the query(like temp tables).
This is done generally when the query execution is complete or the subquery
re-execution is not needed (case with uncorrelated subquery)
2) Partial cleanup: Minor cleanup that is required if
the subquery needs recalculation. This is done for all the structures that
need to be allocated for each execution (example SORT_INFO for filesort
is allocated for each execution of the correlated subquery).
The fix here would be free the cache used by rr_from_cache in the partial
cleanup phase.
* Fix the crash: IN-to-EXISTS rewrite causes an error (and so
JOIN::optimize() fails with an error, too), don't call
update_used_tables(). Terminate the query execution instead.
* Fix the cause of the error in the IN-to-EXISTS rewrite: don't do
the rewrite if doing it will cause an error of this kind:
This version of MariaDB doesn't yet support 'SUBQUERY in ROW in left
expression of IN/ALL/ANY'
* Fix another issue exposed by this testcase:
JOIN::setup_subquery_caches() may be invoked before any select has
saved its query plan, and will crash because none of the SELECTs
has called create_explain_query_if_not_exists() to create the Explain
Data Structure for this SELECT.
TODO: When merging this to 10.2, remove the poorly-placed call to
create_explain_query_if_not_exists made by fix for M_D_E_V-16153
- Some of the bug fixes are backports from 10.5!
- The fix in innobase/fil/fil0fil.cc is just a backport to get less
error messages in mysqld.1.err when running with valgrind.
- Renamed HAVE_valgrind_or_MSAN to HAVE_valgrind
- Removed not needed bzero in void TABLE::initialize_quick_structures().
- Replaced bzero with TRASH_ALLOC() to have this change verfied with
memory checkers
- Added missing table->quick_keys.is_set in table_cond_selectivity()
- select_describe() should not attempt to produce query plans
for subqueries if the query is handled by a Select Handler.
- JOIN::save_explain_data_intern should not add links to Explain_select
for children selects if:
1. The whole query is handled by the Select Handler, or
2. this select (and so its children) is handled by Derived Handler.
Starting from 10.3, the optimizer is able to detect that entire outer join
nests are constants (because of "Impossible ON") and remove them (see
mark_join_nest_as_const)
However, this was not properly accounted for in NESTED_JOIN structure
and the way check_interleaving_with_nj() uses its n_tables member to
check if the join prefix order is allowed.
(The result was that the optimizer could conclude that no join prefix is
allowed and fail an assertion)
When a prepared statement parameter '?' is used in a CTE that is used
multiple times, the following happens:
- The CTE definition is re-parsed multiple times.
- There are multiple Item_param objects referring to the same "?" in
the original query.
- Prepared_statement::param has a pointer to the first of them, the
others are "clones".
- When prepared statement parameter gets the value, it should be passed
over to clones with param->sync_clones() call.
This call is made in insert_params(), etc. It was not made in
insert_params_with_log().
This would cause Item_param to not have any value which would confuse
the query optimizer.
Added the missing call.
In case of SELECT without tables which returns either 0 or 1 rows,
JOIN::exec_inner() did not check if the flag representing SQL_CALC_FOUND_ROWS
is set or not and send_records was direclty assigned 0. So SELECT FOUND_ROWS()
was giving 0 in the output. Now it checks if the flag is set, if it is set
send_record=1 else 0. 1 is the number of rows that could have been sent
to the client if the SELECT query had SQL_CALC_FOUND_ROWS.
It is 0 when no rows were sent because the SELECT query did not have
SQL_CALC_FOUND_ROWS.
UPDATE gets access to history records because versioning conditions
are not set for VIEW. This leads to endless loop of inserting history
records when clustered index is rebuilt and ha_rnd_next() returns
newly inserted history record.
Return back original behavior of failing on write-locked table in
historical query.
35b679b9 assumed that SELECT_LEX::lock_type influences anything, but
actually at this point table is already locked. Original bug report
was tempesta-tech/mariadb#102
A temporary table is needed for window function computation but if only a NAMED WINDOW SPEC
is used and there is no window function, then there is no need to create a temporary
table as there is no stage to compute WINDOW FUNCTION
1. Code simplification:
Item_default_value handled all these values:
a. DEFAULT(field)
b. DEFAULT
c. IGNORE
and had various conditions to distinguish (a) from (b) and from (c).
Introducing a new abstract class Item_contextually_typed_value_specification,
to handle (b) and (c), so the hierarchy now looks as follows:
Item
Item_result_field
Item_ident
Item_field
Item_default_value - DEFAULT(field)
Item_contextually_typed_value_specification
Item_default_specification - DEFAULT
Item_ignore_specification - IGNORE
2. Introducing a new virtual method is_evaluable_expression() to
determine if an Item is:
- a normal expression, so its val_xxx()/get_date() methods can be called
- or a just an expression substitute, whose value methods cannot be called.
3. Disallowing Items that are not evalualble expressions in table value
constructors.
