mysql-test/suite/parts/t/partition_repair_myisam-master.opt:
Added missing file from last push
sql-bench/bench-init.pl.sh:
Added options:
--temporary-tables to test speed of temporary tables
sql-bench/server-cfg.sh:
Added limit for number of temporary tables one can create
sql-bench/test-connect.sh:
Skip test that doesn't work with temporary tables.
sql-bench/test-create.sh:
Added limit for number of temporary tables one can create
myisam-recover options changed from OFF to 'DEFAULT' to get less change of data loss when using MyISAM.
(The disadvantage is that changed MyISAM tables will be checked at access time; Use --myisam-recover=OFF for old behavior)
Don't call extra(HA_EXTRA_FORCE_REOPEN) in ALTER TABLE if table is locked as this will mark table as crashed!
Added assert to detect if we accidently would use MyISAM versioning in MySQL
include/my_base.h:
Mark NOT_USED as USED, as we now use this as a flag to not call extra()
mysql-test/mysql-test-run.pl:
Don't write all options when there is something wrong with the arguments
mysql-test/r/sp-destruct.result:
Add missing flush of mysql.proc (as the test copied live tables)
mysql-test/r/variables.result:
myisam-recover options changed to 'default'
mysql-test/r/view.result:
Don't show create time in result
mysql-test/suite/maria/t/maria-recovery2-master.opt:
Don't run test with myisam-recover (as this produces extra warnings during simulated death)
mysql-test/t/sp-destruct.test:
Add missing flush of mysql.proc (as the test copied live tables)
mysql-test/t/view.test:
Don't show create time in result
sql/lock.cc:
Added marker if table was deleted to argument list
sql/mysql_priv.h:
Added marker if table was deleted to argument list
sql/mysqld.cc:
myisam-recover options changed from OFF to 'DEFAULT' to get less change of data loss when using MyISAM
Allow one to specify OFF as argument to myisam-recover (was default before but one couldn't specify it)
sql/sql_base.cc:
Mark if table is going to be deleted
sql/sql_delete.cc:
Mark if table is going to be deleted
sql/sql_table.cc:
Mark if table is going to be deleted
Don't call extra(HA_EXTRA_FORCE_REOPEN) in ALTER TABLE if table is locked as this will mark table as crashed!
sql/table.cc:
Signal to handler if table is getting deleted as part of getting droped from table cache.
sql/table.h:
Added marker if table is going to be deleted.
storage/maria/ha_maria.cc:
Don't search for transaction handler if file is not transactional or outside of transaction
(Fixed possible core dump)
storage/maria/ma_blockrec.c:
Don't write changed information if table is going to be deleted.
storage/maria/ma_close.c:
Don't write changed information if table is going to be deleted.
storage/maria/ma_extra.c:
Mark tables that are deleted as crased, to ensure good behavior on restart if we suddenly crash.
storage/maria/ma_locking.c:
Cleanup
storage/maria/ma_recovery.c:
We need trnman to be inited during redo phase (to be able to open tables checked with maria_chk)
storage/maria/maria_def.h:
Added marker if table is going to be deleted.
storage/myisam/mi_close.c:
Don't write changed information if table is going to be deleted.
storage/myisam/mi_extra.c:
Mark tables that are deleted as crased, to ensure good behavior on restart if we suddenly crash.
storage/myisam/mi_open.c:
Added assert to detect if we accidently would use MyISAM versioning in MySQL
storage/myisam/myisamdef.h:
Added marker if table is going to be deleted.
The problem becomes apparent only if HAVE_purify is undefined.
It related to the part of code placed in open_table_from_share() fuction
where we initialize record buffer only if HAVE_purify is enabled.
So in case of HAVE_purify=OFF record buffer is not initialized
on open table stage.
Next we read key, find NULL value and update appropriate null bit
but do not update record buffer. After that the record is stored
in the join cache(store_record_in_cache). For CHAR fields we
strip trailing spaces and in our case this procedure uses
uninitialized record buffer.
The fix is to skip stripping space procedure in case of null values
for CHAR fields(partially based on 6.0 JOIN_CACHE implementation).
mysql-test/r/join.result:
test case
mysql-test/t/join.test:
test case
sql/field.cc:
code updated according to new CACHE_FIELD struct
sql/sql_select.cc:
code updated according to new CACHE_FIELD struct
sql/sql_select.h:
CACHE_FIELD struct:
added new fields: Field *field, uint type;
removed fields: Field_blob *blob_field, bool strip;
removed in MySQL 6.0
CREATE TABLE... TYPE= returns the warning "The syntax
'TYPE=storage_engine' is deprecated and will be removed in
MySQL 6.0. Please use 'ENGINE=storage_engine' instead"
This syntax is deprecated already from version 5.4.4, so
the message has been changed.
In addition, the deprecation macro was changed to reflect
the ServerPT decision not to include version number in the
warning message.
A number of test result files have been changed as a
consequence of the change in the deprecation macro.
Queries optimized with GROUP_MIN_MAX didn't cleanup KEYREAD
optimization properly. As a result subsequent queries may
return incomplete rows (fields are initialized to default
values).
mysql-test/r/group_min_max.result:
A test case for BUG#49902.
mysql-test/t/group_min_max.test:
A test case for BUG#49902.
sql/opt_range.cc:
Refactor of KEYREAD optimization switch so that KEYREAD
handler state is in sync with st_table::key_read flag.
All SQL code is supposed to switch KEYREAD optimization
via st_table::set_keyread().
sql/opt_sum.cc:
Refactor of KEYREAD optimization switch so that KEYREAD
handler state is in sync with st_table::key_read flag.
All SQL code is supposed to switch KEYREAD optimization
via st_table::set_keyread().
sql/sql_select.cc:
Refactor of KEYREAD optimization switch so that KEYREAD
handler state is in sync with st_table::key_read flag.
All SQL code is supposed to switch KEYREAD optimization
via st_table::set_keyread().
sql/sql_update.cc:
Refactor of KEYREAD optimization switch so that KEYREAD
handler state is in sync with st_table::key_read flag.
All SQL code is supposed to switch KEYREAD optimization
via st_table::set_keyread().
sql/table.cc:
Refactor of KEYREAD optimization switch so that KEYREAD
handler state is in sync with st_table::key_read flag.
All SQL code is supposed to switch KEYREAD optimization
via st_table::set_keyread().
sql/table.h:
Refactor of KEYREAD optimization switch so that KEYREAD
handler state is in sync with st_table::key_read flag.
All SQL code is supposed to switch KEYREAD optimization
via st_table::set_keyread().
Grouping by a subquery in a query with a distinct aggregate
function lead to a wrong result (wrong and unordered
grouping values).
There are two related problems:
1) The query like this:
SELECT (SELECT t1.a) aa, COUNT(DISTINCT b) c
FROM t1 GROUP BY aa
returned wrong result, because the outer reference "t1.a"
in the subquery was substituted with the Item_ref item.
The Item_ref item obtains data from the result_field object
that refreshes once after the end of each group. This data
is not applicable to filesort since filesort() doesn't care
about groups (and doesn't update result_field objects with
copy_fields() and so on). Also that data is not applicable
to group separation algorithm: end_send_group() checks every
record with test_if_group_changed() that evaluates Item_ref
items, but it refreshes those Item_ref-s only after the end
of group, that is a vicious circle and the grouped column
values in the output are shifted.
Fix: if
a) we grouping by a subquery and
b) that subquery has outer references to FROM list
of the grouping query,
then we substitute these outer references with
Item_direct_ref like references under aggregate
functions: Item_direct_ref obtains data directly
from the current record.
2) The query with a non-trivial grouping expression like:
SELECT (SELECT t1.a) aa, COUNT(DISTINCT b) c
FROM t1 GROUP BY aa+0
also returned wrong result, since JOIN::exec() substitutes
references to top-level aliases in SELECT list with Item_copy
caching items. Item_copy items have same refreshing policy
as Item_ref items, so the whole groping expression with
Item_copy inside returns wrong result in filesort() and
end_send_group().
Fix: include aliased items into GROUP BY item tree instead
of Item_ref references to them.
mysql-test/r/group_by.result:
Test case for bug #45640
mysql-test/t/group_by.test:
Test case for bug #45640
sql/item.cc:
Bug #45640: optimizer bug produces wrong results
Item_field::fix_fields() has been modified to resolve
aliases in GROUP BY item trees into aliased items instead
of Item_ref items.
sql/item.h:
Bug #45640: optimizer bug produces wrong results
- Item::find_item_processor() has been introduced.
- Item_ref::walk() has been modified to apply processors
to itself too (not only to referenced item).
sql/mysql_priv.h:
Bug #45640: optimizer bug produces wrong results
fix_inner_refs() has been modified to accept group_list
parameter.
sql/sql_lex.cc:
Bug #45640: optimizer bug produces wrong results
Initialization of st_select_lex::group_fix_field has
been added.
sql/sql_lex.h:
Bug #45640: optimizer bug produces wrong results
The st_select_lex::group_fix_field field has been introduced
to control alias resolution in Itef_fied::fix_fields.
sql/sql_select.cc:
Bug #45640: optimizer bug produces wrong results
- The fix_inner_refs function has been modified to treat
subquery outer references like outer fields under aggregate
functions, if they are included in GROUP BY item tree.
- The find_order_in_list function has been modified to
fix Item_field alias fields included in the GROUP BY item
trees in a special manner.
logging is disabled
The server would hit an assertion because of a DBUG violation.
There was a missing DBUG_RETURN and instead a plain return
was used.
This patch replaces the return with DBUG_RETURN.
into slow log
While processing a statement, down the mysql_parse execution
stack, the thd->enable_slow_log can be assigned to
opt_log_slow_admin_statements, depending whether one is executing
administrative statements, such as ALTER TABLE, OPTIMIZE,
ANALYZE, etc, or not. This can have an impact on slow logging for
statements that are executed after an administrative statement
execution is completed.
When executing statements directly from the user this is fine
because, the thd->enable_slow_log is reset right at the beginning
of the dispatch_command function, ie, everytime a new statement
is set is set to execute.
On the other hand, for slave SQL thread (sql_thd) the story is a
bit different. When in SBR the sql_thd applies statements by
calling mysql_parse. Right after, it calls log_slow_statement
function to log them if they take too long. Calling mysql_parse
directly is fine, but also means that dispatch_command function
is bypassed. As a consequence, thd->enable_slow_log does not get
a chance to be reset before the next statement to be executed by
the sql_thd. If the statement just executed by the sql_thd was an
administrative statement and logging of admin statements was
disabled, this means that sql_thd->enable_slow_log will be set to
0 (disabled) from that moment on. End result: sql_thd stops
logging slow statements.
We fix this by resetting the value of sql_thd->enable_slow_log to
the value of opt_log_slow_slave_statements right after
log_slow_stement is called by the sql_thd.
To 5.x Release
Notes
=====
This is a backport of BUG#23300 into 5.1 GA.
Original cset revid (in betony):
luis.soares@sun.com-20090929140901-s4kjtl3iiyy4ls2h
Description
===========
When using replication, the slave will not log any slow query
logs queries replicated from the master, even if the
option "--log-slow-slave-statements" is set and these take more
than "log_query_time" to execute.
In order to log slow queries in replicated thread one needs to
set the --log-slow-slave-statements, so that the SQL thread is
initialized with the correct switch. Although setting this flag
correctly configures the slave thread option to log slow queries,
there is an issue with the condition that is used to check
whether to log the slow query or not. When replaying binlog
events the statement contains the SET TIMESTAMP clause which will
force the slow logging condition check to fail. Consequently, the
slow query logging will not take place.
This patch addresses this issue by removing the second condition
from the log_slow_statements as it prevents slow queries to be
binlogged and seems to be deprecated.
When using MyIsam tables and processing concurrent DML
statements, the server may be sending back an OK to the client
before actually finishing the transaction commit procedure. This
has been reported before in BUG@37521 and BUG@29334.
This particular test case gets affected, because it performs the
following sequence:
connect (conn2, ...)
connection conn2;
LOAD DATA CONCURRENT ...
disconnect (conn2, ...)
connection master;
sync_slave_with_master
diff_tables
At this point diff_tables may report difference in the table
content (the master seems to be missing the conn2 rows).
To workaround this MyISAM concurrent DML statements issue and
make this test case deterministic, we wait on conn2 until the
rows inserted show up in the table. After this the test case
proceeds as normally would before this patch.
write()/read()
Sometimes stop/restart master or stop/restart salve can cause
network error, which can cause the 'invalid file descriptor
-1 in syscall write()/read()' warnings. All involved test
cases except rpl_slave_load_remove_tmpfile belong to the
kind of network error. So they are expected.
The 'rpl_slave_load_remove_tmpfile' belongs to file error,
but it is testing the file error as following code:
DBUG_EXECUTE_IF("remove_slave_load_file_before_write",
my_close(fd,MYF(0)); fd= -1; my_delete(fname, MYF(0)););
So it's expected too.
To fix the problem, add the valgrind warnings to the global
suppression list to suppress it.
mysql-test/include/mtr_warnings.sql:
Added code to suppress valgrind warnings: invalid file
descriptor -1 in syscall write()/read().
The test case rpl_binlog_corruption fails on windows because when
adding a line to the binary log index file it gets terminated
with a CR+LF (which btw, is the normal case in windows, but not on
Unixes - LF). This causes mismatch between the relay log names,
causing mysqld to report that it cannot find the log file.
We fix this by creating the instrumented index file through
mysql, ie, using SELECT ... INTO DUMPFILE ..., as opposed on
relying on ultimatly OS commands like: -- echo "..." >
index. These changes go into the file and make the procedure
platform independent:
include/setup_fake_relay_log.inc
Side note: when using SELECT ... INTO DUMPFILE ..., one needs to
check if mysqld is running with secure_file_priv. If it is, we do
it in two steps: 1. create the file on the allowed location;
2. move it to the datadir. If it is not, then we just create the
file directly on the datadir (so previous step 2. is not needed).
Performing fulltext prefix search (a word with truncation
operator) may cause a dead-loop. ft_min_word_len value
doesn't matter actually.
The problem was introduced along with "smarter index merge"
optimization.
mysql-test/r/fulltext.result:
A test case for BUG#50351.
mysql-test/t/fulltext.test:
A test case for BUG#50351.
storage/myisam/ft_boolean_search.c:
When going up to first-level tree, we need to restore docid[0],
so it informs fulltext index merge not to enter this second-level
tree again (avoiding dead-loop).
There was two problems:
The first was the symptom, caused by bad error handling in
ha_partition. It did not handle print_error etc. when
having no partitions (when used by dummy handler).
The second was the real problem that when dropping tables
it reused the table type (storage engine) from when the lock
was asked for, not the table type that it had when gaining
the exclusive name lock. So that it tried to delete tables
from wrong storage engines.
Solutions for the first problem was to accept some handler
calls to the partitioning handler even if it was not setup
with any partitions, and also if possible fallback
to use the base handler's default functions.
Solution for the second problem was to remove the optimization
to reuse the definition from the cache, instead always check
the frm-file when holding the LOCK_open mutex
(updated with a fix for a debug print crash and better
comments as required by reviewer, and removed optimization
to avoid reading the frm-file).
mysql-test/r/partition_debug_sync.result:
Bug#42438: Crash ha_partition::change_table_ptr
New result file using DEBUG_SYNC for deterministic results.
mysql-test/t/partition_debug_sync.test:
Bug#42438: Crash ha_partition::change_table_ptr
New test file using DEBUG_SYNC for deterministic results.
sql/ha_partition.cc:
Bug#42438: Crash ha_partition::change_table_ptr
allow some handler calls, used by error handling, even when
no partitions are setup. Fallback to default handling if possible.
sql/sql_base.cc:
Bug#42438: Crash ha_partition::change_table_ptr
Added DEBUG_SYNC point for deterministic test cases.
sql/sql_table.cc:
Bug#42438: Crash ha_partition::change_table_ptr
Always use the table type written in the .frm-file
(i.e. the current table type) when deleting a table.
Moved the check for log-table to not depend of the cache.
Added DEBUG_SYNC points for deterministic test cases.
------------------------------------------------------------------------
r6488 | sunny | 2010-01-21 02:55:08 +0200 (Thu, 21 Jan 2010) | 2 lines
Changed paths:
M /branches/5.1/mysql-test/innodb-autoinc.result
M /branches/5.1/mysql-test/innodb-autoinc.test
branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
into a separate test/result files.
------------------------------------------------------------------------
r6489 | sunny | 2010-01-21 02:57:50 +0200 (Thu, 21 Jan 2010) | 2 lines
Changed paths:
A /branches/5.1/mysql-test/innodb-autoinc-44030.result
A /branches/5.1/mysql-test/innodb-autoinc-44030.test
branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
into a separate test/result files.
------------------------------------------------------------------------
r6492 | sunny | 2010-01-21 09:38:35 +0200 (Thu, 21 Jan 2010) | 1 line
Changed paths:
M /branches/5.1/mysql-test/innodb-autoinc-44030.test
branches/5.1: Add reference to bug#47621 in the comment.
------------------------------------------------------------------------
r6535 | sunny | 2010-01-30 00:08:40 +0200 (Sat, 30 Jan 2010) | 11 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1: Undo the change from r6424. We need to return DB_SUCCESS even
if we were unable to initialize the tabe autoinc value. This is required for
the open to succeed. The only condition we currently treat as a hard error
is if the autoinc field instance passed in by MySQL is NULL.
Previously if the table autoinc value was 0 and the next value was requested
we had an assertion that would fail. Change that assertion and treat a value
of 0 to mean that the autoinc system is unavailable. Generation of next
value will now return failure.
rb://237
------------------------------------------------------------------------
r6536 | sunny | 2010-01-30 00:13:42 +0200 (Sat, 30 Jan 2010) | 6 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/mysql-test/innodb-autoinc.result
M /branches/5.1/mysql-test/innodb-autoinc.test
branches/5.1: Check *first_value everytime against the column max
value and set *first_value to next autoinc if it's > col max value.
ie. not rely on what is passed in from MySQL.
[49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value
rb://236
------------------------------------------------------------------------
r6537 | sunny | 2010-01-30 00:35:00 +0200 (Sat, 30 Jan 2010) | 2 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/mysql-test/innodb-autoinc.result
M /branches/5.1/mysql-test/innodb-autoinc.test
branches/5.1: Undo r6536.
------------------------------------------------------------------------
r6538 | sunny | 2010-01-30 00:43:06 +0200 (Sat, 30 Jan 2010) | 6 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/mysql-test/innodb-autoinc.result
M /branches/5.1/mysql-test/innodb-autoinc.test
branches/5.1: Check *first_value every time against the column max
value and set *first_value to next autoinc if it's > col max value.
ie. not rely on what is passed in from MySQL.
[49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value
rb://236
------------------------------------------------------------------------
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
value and set *first_value to next autoinc if it's > col max value.
ie. not rely on what is passed in from MySQL.
[49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value
rb://236
value and set *first_value to next autoinc if it's > col max value.
ie. not rely on what is passed in from MySQL.
[49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value
rb://236
Fixed 2 problems :
1. test_if_order_by_key() was continuing on the primary key
as if it has a primary key suffix (as the secondary keys do).
This leads to crashes in ORDER BY <pk>,<pk>.
Fixed by not treating the primary key as the secondary one
and not depending on it being clustered with a primary key.
2. The cost calculation was trying to read the records
per key when operating on ORDER BYs that order on all of the
secondary key + some of the primary key.
This leads to crashes because of out-of-bounds array access.
Fixed by assuming we'll find 1 record per key in such cases.
Fixed bug in Yassle to get correct error messages in case of errors
Provide better error messages in case of ssl connect failure
Updated out-of-date ssl certificates to fix failing mysql-test-system (certificates now active for 10 years)
Fixed bug in query_cache that could cause asserts and hangs in DEBUG builds.
Fixed bug where one connection did not see changes done by another connection.
configure.in:
Changed version number from RC to stable
extra/yassl/src/yassl_error.cpp:
Fixed bug in Yassle to get correct error messages in case of errors
- 'error' is an enum that hold more error numbers than the enum was defined for
include/violite.h:
Added error output string for sslaccept() and sslconnect() to get reason for connect failure
mysql-test/mysql-test-run.pl:
Write failed test cases if mysql-test-run fails because of too many errors
mysql-test/r/grant.result:
Update results to reflect new certificates
mysql-test/r/openssl_1.result:
Update results to reflect new certificates
mysql-test/std_data/cacert.pem:
Update ssl certificate
mysql-test/std_data/client-cert.pem:
Update ssl certificate
mysql-test/std_data/client-key.pem:
Update ssl certificate
mysql-test/std_data/server-cert.pem:
Update ssl certificate
mysql-test/std_data/server-key.pem:
Update ssl certificate
mysql-test/t/grant.test:
Update test to reflect new certificates
mysql-test/t/openssl_1.test:
Update test to reflect new certificates
mysql-test/t/query_cache_debug.test:
Remove 'big_test' as test is now fast
sql-common/client.c:
Give a better error message if ssl connect fails
sql/net_serv.cc:
Fixed compiler warnings
sql/slave.cc:
Give a better error message in logs if ssl connect fails
sql/sql_cache.cc:
debug_wait_for_kill() now removes the set watch variable after kill signal
This is needed as invalidate_table() may be called twice for one query.
Ensure that net->query_cache_query is reset after query. This fixes assert in
query_cache_end_of_result() if query_cache_query holds results from previous query.
Removed DBUG_ASSERT(0), as this code can be run by query_cache_debug.test
sql/sql_connect.cc:
Give a better error message if ssl connect fails
sql/sql_parse.cc:
Fixed bug where one connection did not see changes done by another connection.
For statements that changes tables, close_thread_tables() MUST be called before
sending OK as a table handler may not make the changes available for other connections
before unlock_tables().
vio/viossl.c:
Give a better error message if ssl connect fails
column is used for ORDER BY
Problem: filesort isn't meant for null length sort data
(e.g. char(0)), that leads to a server crash.
Fix: disregard sort order if sort data record length is 0 (nothing
to sort).
mysql-test/r/select.result:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- test result.
mysql-test/t/select.test:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- test case.
sql/filesort.cc:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- assert added as filesort cannot handle null length sort data.
sql/sql_select.cc:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- don't sort null length data e.g. in case of ORDER BY CHAR(0).
number to InnoDB index structure directly. Fix Bug #47622:
"the new index is added before the existing ones in MySQL,
but after one in SE".
rb://215, approved by Marko
When compiling with debug, don't clear buffer in 'net_clear()'
- This allows us to easier find bugs in the protocol and also get repeatable test failures in test cases where someone forgot to do --reap
client/mysqltest.cc:
Fixed compiler warning
mysql-test/t/partition_innodb_semi_consistent.test:
Added missing --reap (fixes random failure)
sql/net_serv.cc:
When compiling with debug, don't clear buffer in 'net_clear()'
- This allows us to easier find bugs in the protocol and also get repeatable test failures in test cases where someone forgot to do --reap
storage/myisam/ft_boolean_search.c:
Fixed compiler warnings
storage/myisam/ft_parser.c:
Fixed compiler warnings
storage/myisam/ft_stopwords.c:
Fixed compiler warnings
support-files/compiler_warnings.supp:
Added a lot of new suppression of not relevant warnings and warnings in systems we are not in charge of
unittest/mysys/waiting_threads-t.c:
Fixed compiler warnings
The problem was that a DROP TRIGGER statement inside a stored
procedure could cause a crash in subsequent invocations. This
was due to the addition, on the first execution, of a temporary
table reference to the stored procedure query table list. In
a subsequent invocation, there would be a attempt to reinitialize
the temporary table reference, which by then was already gone.
The solution is to backup and reset the query table list each
time a trigger needs to be dropped. This ensures that any temp
changes to the query table list are discarded. It is safe to
do so at this time as drop trigger is restricted from more
complicated scenarios (ie, not allowed within stored functions,
etc).
mysql-test/r/sp-bugs.result:
Add test case result for Bug#50423
mysql-test/t/sp-bugs.test:
Add test case for Bug#50423
sql/sql_trigger.cc:
Backup and reset the query table list.
Remove now unnecessary manual reset of the query table list.
Server crashes when accessing ARCHIVE table with missing
.ARZ file.
When opening a table, ARCHIVE didn't properly pass through
error code from lower level azopen() to higher level open()
method.
mysql-test/r/archive.result:
A test case for BUG#48757.
mysql-test/t/archive.test:
A test case for BUG#48757.
storage/archive/ha_archive.cc:
Pass through error code from azopen().
Bulk REPLACE or bulk INSERT ... ON DUPLICATE KEY UPDATE may
break dynamic record MyISAM table.
The problem is limited to bulk REPLACE and INSERT ... ON
DUPLICATE KEY UPDATE, because only these operations may
be done via UPDATE internally and may request write cache.
When flushing write cache, MyISAM may write remaining
cached data at wrong position. Fixed by requesting write
cache to seek to a correct position.
mysql-test/r/myisam.result:
A test case for BUG#49628.
mysql-test/t/myisam.test:
A test case for BUG#49628.
storage/myisam/mi_dynrec.c:
delete_dynamic_record() may change data file position.
IO cache must be notified as it may still have cached
data, which has to be flushed later.
table and view...
Invalid memory reads after a query referencing MyISAM table
multiple times with write lock. Invalid memory reads may
lead to server crash, valgrind warnings, incorrect values
in INFORMATION_SCHEMA.TABLES.{TABLE_ROWS, DATA_LENGTH,
INDEX_LENGTH, ...}.
This may happen when one of the table instances gets closed
after a query, e.g. out of slots in open tables cache. UNION,
MERGE and VIEW are irrelevant.
The problem was that MyISAM didn't restore state info
pointer to default value.
myisam/mi_locking.c:
When a query is referencing MyISAM table multiple times
with a write lock, all table instances share the same
state info, pointing to MI_INFO::save_state of
"primary" table instance.
When lock is released, state pointer was restored only
for the primary table instance. Secondary table instances
are still pointing to save_state of primary table
instance.
Primary table instance may get closed, leaving secondary
table instances state pointer pointing to freed memory.
That's mostly ok, since next lock will update state info
pointer to correct value. But there're some cases, when
this secondary table instance state info is accessed
without a lock, e.g. INFORMATION_SCHEMA, MERGE (in 5.1
and up), MyISAM itself for DBUG purposes.
Restore default value of state pointer unconditionally,
for both primary and secondary table instances.
mysql-test/r/myisam.result:
A test case for BUG#48438.
mysql-test/t/myisam.test:
A test case for BUG#48438.
In case of 'CREATE VIEW' subselect transformation does not happen(see JOIN::prepare).
During fix_fields Item_row may call is_null() method for its arugmens which
leads to item calculation(wrong subselect in our case as
transformation did not happen before). This is_null() call
does not make sence for 'CREATE VIEW'.
Note:
Only Item_row is affected because other items don't call is_null()
during fix_fields() for arguments.
mysql-test/r/view.result:
test case
mysql-test/t/view.test:
test case
sql/item_row.cc:
skip is_null() call in case of 'CREATE VIEW' as unnecessary.
