Moved TOI replication to happen after ACL checking for commands:
SQLCOM_CREATE_EVENT
SQLCOM_ALTER_EVENT
SQLCOM_DROP_EVENT
SQLCOM_CREATE_VIEW
SQLCOM_CREATE_TRIGGER
SQLCOM_DROP_TRIGGER
SQLCOM_INSTALL_PLUGIN
SQLCOM_UNINSTALL_PLUGIN
'version' variables.
The warnings occur on Windows build, yet they are also are valid
on 32bit Unix.
Fix is to consistently use 64bit integer on all platforms.
For running the Galera tests, the variable my_disable_leak_check
was set to true in order to avoid assertions due to memory leaks
at shutdown.
Some adjustments due to MDEV-13625 (merge InnoDB tests from MySQL 5.6)
were performed. The most notable behaviour changes from 10.0 and 10.1
are the following:
* innodb.innodb-table-online: adjustments for the DROP COLUMN
behaviour change (MDEV-11114, MDEV-13613)
* innodb.innodb-index-online-fk: the removal of a (1,NULL) record
from the result; originally removed in MySQL 5.7 in the
Oracle Bug #16244691 fix
377774689b
* innodb.create-index-debug: disabled due to MDEV-13680
(the MySQL Bug #77497 fix was not merged from 5.6 to 5.7.10)
* innodb.innodb-alter-autoinc: MariaDB 10.2 behaves like MySQL 5.6/5.7,
while MariaDB 10.0 and 10.1 assign different values when
auto_increment_increment or auto_increment_offset are used.
Also MySQL 5.6/5.7 exhibit different behaviour between
LGORITHM=INPLACE and ALGORITHM=COPY, so something needs to be tested
and fixed in both MariaDB 10.0 and 10.2.
* innodb.innodb-wl5980-alter: disabled because it would trigger an
InnoDB assertion failure (MDEV-13668 may need additional effort in 10.2)
Merged from mysql-wsrep-bugs following:
GCF-1058 MTR test galera.MW-86 fails on repeated runs
Wait for the sync point sync.wsrep_apply_cb to be reached before
executing the test and clearing the debug flag sync.wsrep_apply_cb.
The race scenario:
Intended behavior:
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
node2 (background): consume the signal
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - ok
What happens occasionally (unexpected):
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
// The background INSERT still has _not_ reached the place where it starts
// waiting for the signal:
// DBUG_EXECUTE_IF("sync.wsrep_apply_cb", "now wait_for...");
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
// The background INSERT reaches DBUG_EXECUTE_IF("sync.wsrep_apply_cb", ...)
// but sync.wsrep_apply_cb has already been cleared and the "wait" code is not
// executed. The signal remains unconsumed.
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - failure, signal.wsrep_apply_cb is
pending (not consumed)
Remove MW-360 test case as it is not intended for MariaDB (uses
MySQL GTID).
Sync waiting before processing SQLCOM_REPLACE was not necessary given that
this case falls through to processing of SQLCOM_INSERT. In case of
SQLCOM_REPLACE, wsrep_sync_wait would be called twice.
Previously, setting `wsrep_sync_wait = 1` would have an effect on
both SELECT and SHOW statements.
This patch changes wsrep_sync_wait so that bitmask value 1 is used
for SELECT statements, while bitmask value 8 is reserved for SHOW
statements.
It is still possible to achieve sync wait on both SELECT and SHOW
statements by setting `wsrep_sync_wait = 9`.
The problem was that the introduction of max-thread-mem-used can cause
an allocation error very early, even before mysql_parse() is called.
As mysql_parse() calls thd->reset_for_next_command(), which called
clear_error(), the error number was lost.
Fixed by adding an option to have unique messages for each KILL
signal and change max-thread-mem-used to use this new feature.
This removes a lot of problems with the original approach, where
one could get errors signaled silenty almost any time.
ixed by moving clear_error() from reset_for_next_command() to
do_command(), before any memory allocation for the thread.
Related changes:
- reset_for_next_command() now have an optional parameter if we should
call clear_error() or not. By default it's called, but not anymore from
dispatch_command() which was the original problem.
- Added optional paramater to clear_error() to force calling of
reset_diagnostics_area(). Before clear_error() only called
reset_diagnostics_area() if there was no error, so we normally
called reset_diagnostics_area() twice.
- This change removed several duplicated calls to clear_error()
when starting a query.
- Reset max_mem_used on COM_QUIT, to protect against kill during
quit.
- Use fatal_error() instead of setting is_fatal_error (cleanup)
- Set fatal_error if max_thead_mem_used is signaled.
(Same logic we use for other places where we are out of resources)
Sync waiting before processing SQLCOM_REPLACE was not necessary given that
this case falls through to processing of SQLCOM_INSERT. In case of
SQLCOM_REPLACE, wsrep_sync_wait would be called twice.
Signed-off-by: Jan Lindström <jan.lindstrom@mariadb.com>
The following commands are now subject to wsrep_sync_wait
with bitmask value 8:
SHOW BINARY LOGS
SHOW BINLOG EVENTS
SHOW GRANTS
Signed-off-by: Jan Lindström <jan.lindstrom@mariadb.com>
Previously, setting `wsrep_sync_wait = 1` would have an effect on
both SELECT and SHOW statements.
This patch changes wsrep_sync_wait so that bitmask value 1 is used
for SELECT statements, while bitmask value 8 is reserved for SHOW
statements.
It is still possible to achieve sync wait on both SELECT and SHOW
statements by setting `wsrep_sync_wait = 9`.
Signed-off-by: Jan Lindström <jan.lindstrom@mariadb.com>
CREATE/DROP TEMPORARY TABLE are not safe to optimistically replicate in
parallel with other transactions, so they need to be marked as "ddl" in the
binlog.
This was already done for stand-alone CREATE/DROP TEMPORARY. But temporary
tables can also be created and dropped inside a BEGIN...END transaction, and
such transactions were not marked as ddl. Nor was the DROP TEMPORARY TABLE
statement emitted implicitly when a client connection is closed.
So this patch adds such ddl mark for the missing cases.
The difference to Kristian's original patch is mainly a fix in
mysql_trans_commit_alter_copy_data() to remember the unsafe_rollback_flags
over the temporary commit.
Relaxed assertion (in MySQL it was removed).
For "LOCK TABLES t1 WRITE CONCURRENT, t1 READ" upgrade lock to weakest
existing suitable lock, which is MDL_SHARED_NO_READ_WRITE.
Do not silence uncertain cases, or fix any bugs.
The only functional change should be that ha_federated::extra()
is not calling DBUG_PRINT to report an unhandled case for
HA_EXTRA_PREPARE_FOR_DROP.
Do not silence uncertain cases, or fix any bugs.
The only functional change should be that ha_federated::extra()
is not calling DBUG_PRINT to report an unhandled case for
HA_EXTRA_PREPARE_FOR_DROP.
PRIVILEGE.
Backport from mysql-5.7 to mysql-5.5 and mysql-5.6.
BUG#13969578: TEMPORARY TABLE IN A DATABASE ON A READ-ONLY
INSTANCE CAN BE OVERWRITTEN
Analysis:
========
Creation or modification of a persistent table by a non-super user
is NOT ALLOWED in read_only mode. Only TEMPORARY tables are allowed
to be created or modified in read_only mode. But the creation of
a persistent table was being allowed when a temporary table of
the same name existed.
The routine which denies updating a non-temporary table in a
read_only mode does not handle the case of creation of a regular
table when a temporary table of the same exists.
Fix:
===
Handled the condition where an attempt is made to create a persistent
table having the same name as that of the temporary table. Hence
the creation of a persistent table by a non-super user when a
temporary table of the same exists is denied under read_only mode.
