The memory leak happened on second execution of a prepared statement
that runs UPDATE statement with correlated subquery in right hand side of
the SET clause. In this case, invocation of the method
table->stat_records()
could return the zero value that results in going into the 'if' branch
that handles impossible where condition. The issue is that this condition
branch missed saving of leaf tables that has to be performed as first
condition optimization activity. Later the PS statement memory root
is marked as read only on finishing first time execution of the prepared
statement. Next time the same statement is executed it hits the assertion
on attempt to allocate a memory on the PS memory root marked as read only.
This memory allocation takes place by the sequence of the following
invocations:
Prepared_statement::execute
mysql_execute_command
Sql_cmd_dml::execute
Sql_cmd_update::execute_inner
Sql_cmd_update::update_single_table
st_select_lex::save_leaf_tables
List<TABLE_LIST>::push_back
To fix the issue, add the flag SELECT_LEX::leaf_tables_saved to control
whether the method SELECT_LEX::save_leaf_tables() has to be called or
it has been already invoked and no more invocation required.
Similar issue could take place on running the DELETE statement with
the LIMIT clause in PS/SP mode. The reason of memory leak is the same as for
UPDATE case and be fixed in the same way.
Executing an INSERT statement in PS mode having positional parameter
bound with an array could result in incorrect number of inserted rows
in case there is a BEFORE INSERT trigger that executes yet another
INSERT statement to put a copy of row being inserted into some table.
The reason for incorrect number of inserted rows is that a data structure
used for binding positional argument with its actual values is stored
in THD (this is thd->bulk_param) and reused on processing every INSERT
statement. It leads to consuming actual values bound with top-level
INSERT statement by other INSERT statements used by triggers' body.
To fix the issue, reset the thd->bulk_param temporary to the value nullptr
before invoking triggers and restore its value on finishing its execution.
- Moved writing to binlog_cache from close_thread_tables() to
binlog_commit().
- In select_create() delete cached row events instead of flushing them
to disk. This was done to avoid possible disk write error in this code.
When HA_DUPLICATE_POS is not supported, the row to replace was navigated by
ha_index_read_idx_map, which uses only hash to navigate.
Suchwise, given a hash collision it may choose an incorrect row.
handler::position would be correct and very convenient to use here.
dup_ref is already set by handler independently of the engine
capabilities, when an extra lookup is made (for long unique or something else,
for example WITHOUT OVERLAPS) such error will be indicated by
file->lookup_errkey != -1.
This patch also fixes:
MDEV-33050 Build-in schemas like oracle_schema are accent insensitive
MDEV-33084 LASTVAL(t1) and LASTVAL(T1) do not work well with lower-case-table-names=0
MDEV-33085 Tables T1 and t1 do not work well with ENGINE=CSV and lower-case-table-names=0
MDEV-33086 SHOW OPEN TABLES IN DB1 -- is case insensitive with lower-case-table-names=0
MDEV-33088 Cannot create triggers in the database `MYSQL`
MDEV-33103 LOCK TABLE t1 AS t2 -- alias is not case sensitive with lower-case-table-names=0
MDEV-33109 DROP DATABASE MYSQL -- does not drop SP with lower-case-table-names=0
MDEV-33110 HANDLER commands are case insensitive with lower-case-table-names=0
MDEV-33119 User is case insensitive in INFORMATION_SCHEMA.VIEWS
MDEV-33120 System log table names are case insensitive with lower-cast-table-names=0
- Removing the virtual function strnncoll() from MY_COLLATION_HANDLER
- Adding a wrapper function CHARSET_INFO::streq(), to compare
two strings for equality. For now it calls strnncoll() internally.
In the future it will turn into a virtual function.
- Adding new accent sensitive case insensitive collations:
- utf8mb4_general1400_as_ci
- utf8mb3_general1400_as_ci
They implement accent sensitive case insensitive comparison.
The weight of a character is equal to the code point of its
upper case variant. These collations use Unicode-14.0.0 casefolding data.
The result of
my_charset_utf8mb3_general1400_as_ci.strcoll()
is very close to the former
my_charset_utf8mb3_general_ci.strcasecmp()
There is only a difference in a couple dozen rare characters, because:
- the switch from "tolower" to "toupper" comparison, to make
utf8mb3_general1400_as_ci closer to utf8mb3_general_ci
- the switch from Unicode-3.0.0 to Unicode-14.0.0
This difference should be tolarable. See the list of affected
characters in the MDEV description.
Note, utf8mb4_general1400_as_ci correctly handles non-BMP characters!
Unlike utf8mb4_general_ci, it does not treat all BMP characters
as equal.
- Adding classes representing names of the file based database objects:
Lex_ident_db
Lex_ident_table
Lex_ident_trigger
Their comparison collation depends on the underlying
file system case sensitivity and on --lower-case-table-names
and can be either my_charset_bin or my_charset_utf8mb3_general1400_as_ci.
- Adding classes representing names of other database objects,
whose names have case insensitive comparison style,
using my_charset_utf8mb3_general1400_as_ci:
Lex_ident_column
Lex_ident_sys_var
Lex_ident_user_var
Lex_ident_sp_var
Lex_ident_ps
Lex_ident_i_s_table
Lex_ident_window
Lex_ident_func
Lex_ident_partition
Lex_ident_with_element
Lex_ident_rpl_filter
Lex_ident_master_info
Lex_ident_host
Lex_ident_locale
Lex_ident_plugin
Lex_ident_engine
Lex_ident_server
Lex_ident_savepoint
Lex_ident_charset
engine_option_value::Name
- All the mentioned Lex_ident_xxx classes implement a method streq():
if (ident1.streq(ident2))
do_equal();
This method works as a wrapper for CHARSET_INFO::streq().
- Changing a lot of "LEX_CSTRING name" to "Lex_ident_xxx name"
in class members and in function/method parameters.
- Replacing all calls like
system_charset_info->coll->strcasecmp(ident1, ident2)
to
ident1.streq(ident2)
- Taking advantage of the c++11 user defined literal operator
for LEX_CSTRING (see m_strings.h) and Lex_ident_xxx (see lex_ident.h)
data types. Use example:
const Lex_ident_column primary_key_name= "PRIMARY"_Lex_ident_column;
is now a shorter version of:
const Lex_ident_column primary_key_name=
Lex_ident_column({STRING_WITH_LEN("PRIMARY")});
Delayed_insert has its own THD (initialized at mysql_insert()) and
hence its own LEX. Delayed_insert initalizes a very few parameters for
LEX and 'duplicates' is not in this list. Now we copy this missing
parameter from parser LEX (as well as sql_command).
Some fixes related to commit f838b2d799 and
Rows_log_event::do_apply_event() and Update_rows_log_event::do_exec_row()
for system-versioned tables were provided by Nikita Malyavin.
This was required by test versioning.rpl,trx_id,row.
MDEV-33502 Slowdown when running nested statement with many partitions
This change was triggered to help some MariaDB users with close to
10000 bits in their bitmaps.
- Change underlaying storage to be 64 bit instead of 32bit.
- This reduses number of loops to scan bitmaps.
- This can cause some bitmaps to be 4 byte large.
- Ensure that all not used top-bits are always 0 (simplifes code as
the last 64 bit storage is not a special case anymore).
- Use my_find_first_bit() to find the first set bit which is much faster
than scanning trough things byte by byte and then bit by bit.
Other things:
- Added a bool to remember if my_bitmap_init() did allocate the bitmap
array. my_bitmap_free() will only free arrays it did allocate.
This allowed me to remove setting 'bitmap=0' before calling
my_bitmap_free() for cases where the bitmap's where allocated externally.
- my_bitmap_init() sets bitmap to 0 in case of failure.
- Added 'universal' asserts to most bitmap functions.
- Change all remaining calls to bitmap_init() to my_bitmap_init().
- To finish the change from 2014.
- Changed all usage of uint32 in my_bitmap.h to my_bitmap_map.
- Updated bitmap_copy() to handle bitmaps of different size.
- Removed const from bitmap_exists_intersection() as this caused casts
on all usage.
- Removed not used function bitmap_set_above().
- Renamed create_last_word_mask() to create_last_bit_mask() (to match
name changes in my_bitmap.cc)
- Extended bitmap-t with test for more bitmap functions.
write_record() when performing REPLACE has an optimization:
- if the unique violation happened in the last unique key, then do UPDATE
- otherwise, do DELETE+INSERT
This patch changes the way of detecting if this optimization
can be applied if the table has long (hash based) unique
(i.e. UNIQUE..USING HASH) constraints.
Problem:
The old condition did not take into account that
TABLE_SHARE and TABLE see long uniques differently:
- TABLE_SHARE sees as HA_KEY_ALG_LONG_HASH and HA_NOSAME
- TABLE sees as usual non-unique indexes
So the old condition could erroneously decide that the UPDATE optimization
is possible when there are still some unique hash constraints in the table.
Fix:
- If the current key is a long unique, it now works as follows:
UPDATE can be done if the current long unique is the last
long unique, and there are no in-engine (normal) uniques.
- For in-engine uniques nothing changes, it still works as before:
If the current key is an in-engine (normal) unique:
UPDATE can be done if it is the last normal unique.
The leaks are all 40 bytes and happens in this call stack when running
mtr vcol.vcol_syntax:
alloc_root()
...
Virtual_column_info::fix_and_check_exp()
...
Delayed_insert::get_local_table()
The problem was that one copied a MEM_ROOT from THD to a TABLE without
taking into account that new blocks would be allocated through the
TABLE memroot (and would thus be leaked).
In general, one should NEVER copy MEM_ROOT from one object to another
without clearing the copied memroot!
Fixed by, at end of get_local_table(), copy all new allocated objects
to client_thd->mem_root.
Other things:
- Removed references to MEM_ROOT::total_alloc that was wrongly left
after a previous commit
- Add selected tables as shared keys for CTAS certification
- Set proper security context on the replayer thread
- Disallow CTAS command retry
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
INSERT IGNORE had a pecular undocumented case that when one row was
inserted, there was an error rather than a warning.
As LOAD DATA IGNORE, UPDATE IGNORE, INSERT IGNORE SELECT, and INSERT
IGNORE VALUES (single row, for foreign key violation) all behave the same
way with a warning lets keep the behaviour normalized.
In compatibility, previously a error was generated, now a warning is
generated.
This behaviour is now consistent with MySQL-8.0 too.
There are two TABLE objects in each thread: first one is created in
delayed thread by Delayed_insert::open_and_lock_table(), second one is
created in connection thread by Delayed_insert::get_local_table(). It
is copied from the delayed thread table.
When the second table is copied copy-assignment operator copies
vcol_refix_list which is already filled with an item from delayed
thread. Then get_local_table() adds its own item. Thus both tables
contains the same list with two items which is wrong. Then connection
thread finishes and its item freed. Then delayed thread tries to
access it in vcol_cleanup_expr().
The fix just clears vcol_refix_list in the copied table.
Another problem is that copied table contains the same mem_root, any
allocations on it will be invalid if the original table is freed (and
that is indeterministic as it is done in another thread). Since copied
table is allocated in connection THD and lives not longer than
thd->mem_root we may assign its mem_root from thd->mem_root.
Third, it doesn't make sense to do open_and_lock_tables() on NULL
pointer.
MDEV-32441 SENT_ROWS shows random wrong values when stored function
is selected.
MDEV-32281 EXAMINED_ROWS is not populated in
information_schema.processlist upon SELECT.
Added ROWS_SENT to information_schema.processlist
This is to have the same information as Percona server (SENT_ROWS)
To ensure that information_schema.processlist has correct values for
sent_rows and examined_rows I introduced two new variables to hold the
total counts so far. This was needed as stored functions and stored
procedures will reset the normal counters to be able to count rows for
each statement individually for slow query log.
Other things:
- Selects with functions shows in processlist the total examined_rows
and sent_rows by the main statement and all functions.
- Stored procedures shows in processlist examined_rows and sent_rows
per stored procedure statement.
- Fixed some double accounting for sent_rows and examined_rows.
- HANDLER operations now also supports send_rows and examined_rows.
- Display sizes for MEMORY_USED, MAX_MEMORY_USED, EXAMINED_ROWS and
QUERY_ID in information_schema.processlist changed to 10 characters.
- EXAMINED_ROWS and SENT_ROWS changed to bigint.
- INSERT RETURNING and DELETE RETURNING now updates SENT_ROWS.
- As thd is always up to date with examined_rows, we do not need
to handle examined row counting for unions or filesort.
- I renamed SORT_INFO::examined_rows to m_examined_rows to ensure that
we don't get bugs in merges that tries to use examined_rows.
- Removed calls of type "thd->set_examined_row_count(0)" as they are
not needed anymore.
- Removed JOIN::join_examined_rows
- Removed not used functions:
THD::set_examined_row_count()
- Made inline some functions that where called for each row.
The MDEV-29693 conflict resolution is from Monty, as well as is
a bug fix where ANALYZE TABLE wrongly built histograms for
single-column PRIMARY KEY.
Also includes a fix for safe_malloc error reporting.
Other things:
- Copied main.log_slow from 10.4 to avoid mtr issue
Disabled test:
- spider/bugfix.mdev_27239 because we started to get
+Error 1429 Unable to connect to foreign data source: localhost
-Error 1158 Got an error reading communication packets
- main.delayed
- Bug#54332 Deadlock with two connections doing LOCK TABLE+INSERT DELAYED
This part is disabled for now as it fails randomly with different
warnings/errors (no corruption).
At the moment we cannot support
wsrep_forced_binlog_format=[MIXED|STATEMENT]
during CREATE TABLE AS SELECT.
Statement will use ROW instead and give
a warning.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
