Handle string length as size_t, consistently (almost always:))
Change function prototypes to accept size_t, where in the past
ulong or uint were used. change local/member variables to size_t
when appropriate.
This fix excludes rocksdb, spider,spider, sphinx and connect for now.
MyISAM in compute_vcols() - which is used only in mi_check code -
was computing indexed vcols into an internally allocated buffer
(not record[0]) and the buffer was calculated to be long enough to fit
every keyseg (a keyseg knows where its value in a record buffer is
and the length of the value).
This logic didn' work for prefix keys, because the keyseg length is the
length of a prefix, but the record buffer needs to fit the complete
value of a vcol. In this bug MyISAM was writing a 2K varchar
into a buffer too short.
Also it didn't work for repair-with-keycache, because that code
recalculats all vcols, not only indexed ones.
So, the buffer size (MYISAM_SHARE::vreclength) should include all
vcols' full lengths. But it was calculated in mi_open and low-level
MyISAM code has no knowledge of vcols.
As a fix we now recalculate MYISAM_SHARE::vreclength in
ha_myisam::setup_vcols_for_repair() which is always called
before compute_vcols().
Also, implement MDEV-11027 a little differently from 5.5 and 10.0:
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned).
Report progress also via systemd using sd_notifyf().
my_readline can fail due to missing file. Make my_readline report this
condition separately so that we can catch it and report an appropriate
error message to the user.
TOCTOU bug. The path is checked to be valid, symlinks are resolved.
Then the resolved path is opened. Between the check and the open,
there's a window when one can replace some path component with a
symlink, bypassing validity checks.
Fix: after we resolved all symlinks in the path, don't allow open()
to resolve symlinks, there should be none.
Compared to the old MyISAM/Aria code:
* fastpath. Opening of not-symlinked files is just one open(),
no fn_format() and lstat() anymore.
* opening of symlinked tables doesn't do fn_format() and lstat() either.
it also doesn't to realpath() (which was lstat-ing every path
component), instead if opens every path component with O_PATH.
* share->data_file_name stores realpath(path) not readlink(path). So,
SHOW CREATE TABLE needs to do lstat/readlink() now (see ::info()),
and certain error messages (cannot open file "XXX") show the real
file path with all symlinks resolved.
Problem was that one internal record buffer in MYISAM was not big enough to handle virtual fields.
Fixed by extending buffer.
Fixed test case to 79 characters
* don't issue an error for ER_KEY_BASED_ON_GENERATED_VIRTUAL_COLUMN
* support keyread on vcols
* callback into the server to compute vcol values from mi_check/mi_repair
* DMLs just work. Automatically.
- Used same fix as for MyISAM: High level collation byte stored in unused
bit_end position.
- Moved language from header to base_info
- Removed unused bit_end part in HA_KEY_SEG
- Fixed bug that we where using wrong checksum algorithm when using VARCHAR with fixed lenth rows
- Ensure in myisampack that HA_OPTION_NULL_FIELDS is set for tables with null fields.
mysql-test/r/myisampack.result:
Updated results
mysql-test/t/myisampack.test:
Added more tests
storage/myisam/mi_open.c:
Use correct checksum algorithm when we have VARCHAR fields with fixed length records
storage/myisam/myisampack.c:
Ensure HA_OPTION_NULL_FIELDS is set for tables with null fields.
(This was not set by default for not compressed tables without checksums to keep MyISAM tables compatible with MySQL)
This is port of fix for MySQL BUG#17647863.
revno: 5572
revision-id: jon.hauglid@oracle.com-20131030232243-b0pw98oy72uka2sj
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
timestamp: Thu 2013-10-31 00:22:43 +0100
message:
Bug#17647863: MYSQL DOES NOT COMPILE ON OSX 10.9 GM
Rename test() macro to MY_TEST() to avoid conflict with libc++.
Problem description: Incorrect key file. Key file is corrupted,
while reading the keys from the file. The problem here is that
keyseg->start (which should point to the beginning of a field)
is pointing beyond total record length.
Fix: If keyseg->start is greater than total record length then
return error.
Problem description:
mysql server crashes when we run repair table on currupted table.
Analysis:
The problem with this bug seem to be key_reflength out of bounds
(186 according to debugger). We read this value from meta-data
segment of .MYI file while doing mi_open().
If you look into _mi_kpointer() you can see that the upper limit
for key_reflength is 7.
Solution:
In mi_open() there is a line like:
if (share->base.keystart > 65535 || share->base.rec_reflength > 8)
we should verify key_reflength here as well.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
and 'THREAD_SAFE_CLIENT'.
As of MySQL 5.5, we no longer support non-threaded
builds. This patch removes all references to the
obsolete THREAD and THREAD_SAFE_CLIENT preprocessor
symbols. These were used to distinguish between
threaded and non-threaded builds.
The reason for failure is that DBUG_EXECUTE_IF in mi_open()
only worked for Unix-formatted file names, due to strstr(name, "/crashed")
The fix change strstr() above to strstr(name, "crashed"), to it can work with
Windows file names as well.
- Changed Cached_item_field not copy data for fields with NULL value
- In key_copy() and key_restore() don't copy data for fields with NULL value
Fixed code to avoid valgrind warnings
- Use c_ptr_safe instead of c_ptr()
Removed "QQ" from comments (QQ was ment to be used for internal comments that should be removed before pushing)
Fixed wrong alias used (from previous patch)
sql/event_db_repository.cc:
Update testing if event table is valid (to avoid valgrind errors)
sql/ha_partition.cc:
m_ordered_scan_ongoing was not initialized
Reset null bits in record to avoid valgrind errors
sql/handler.h:
Added flag if storage engine will write row verbatim and the row contains varchar or null fields
(in which case we must clear the row to avoid valgrind warnings)
sql/item_buff.cc:
Changed Cached_item_field not copy data for fields with NULL value
(Optimization and avoids valgrind warnings)
sql/item_func.cc:
c_ptr() -> c_ptr_safe()
sql/key.cc:
In key_copy() and key_restore() don't copy data for fields with NULL value
sql/opt_range.cc:
c_ptr() -> c_ptr_safe()
sql/sql_base.cc:
Added TRASH() to table->record[0] to find out if we access not initialzed data.
Initialize null_bytes to:
- Get consistent tests
- Ensure we don't get valgrind warnings for null fields (as we may only update a couple of bits in a byte)
sql/sql_class.cc:
Removed "QQ" from comments
sql/sql_insert.cc:
Initialize row to default values if we are using valgrind and row will be copied verbatim to disk in storage engine.
sql/sql_load.cc:
QQ -> TODO
sql/sql_parse.cc:
Removed old not used code marked QQ and withing "#ifdef REMOVED"
sql/sql_select.cc:
QQ -> TODO
Initialize some variables that was used uninitialized
Added DBUG_ASSERT() to find out if thd was not properly initialized for sub queries
sql/sql_test.cc:
Fixed format for printing to DBUG file
Fixed wrong alias used (from previous patch)
sql/sql_trigger.h:
QQ -> TODO
sql/table.cc:
QQ -> TODO
storage/maria/ha_maria.cc:
Mark table with HA_RECORD_MUST_BE_CLEAN_ON_WRITE, if row is written verbatim to disk and contains varchar or null fields.
storage/maria/ma_open.c:
Added flags if table has varchar or null fields
storage/maria/maria_def.h:
Added flags if table has varchar or null fields
storage/myisam/ha_myisam.cc:
Mark table with HA_RECORD_MUST_BE_CLEAN_ON_WRITE, if row is written verbatim to disk and contains varchar or null fields.
storage/myisam/mi_open.c:
Fixed memory overrun bug when using fulltext keys
storage/xtradb/row/row0sel.c:
Removed initialization of null bits. (not needed anymore)
