Fix warnings flagged by the new warning option -Wunused-but-set-variable
that was added to GCC 4.6 and that is enabled by -Wunused and -Wall. The
option causes a warning whenever a local variable is assigned to but is
later unused. It also warns about meaningless pointer dereferences.
client/mysql.cc:
Meaningless pointer dereferences.
client/mysql_upgrade.c:
Check whether reading from the file succeeded.
extra/comp_err.c:
Unused.
extra/yassl/src/yassl_imp.cpp:
Skip instead of reading data that is discarded.
include/my_pthread.h:
Variable is only used in debug builds.
include/mysys_err.h:
Add new error messages.
mysys/errors.c:
Add new error message for permission related functions.
mysys/mf_iocache.c:
Variable is only checked under THREAD.
mysys/my_copy.c:
Raise a error if chmod or chown fails.
mysys/my_redel.c:
Raise a error if chmod or chown fails.
regex/engine.c:
Use a equivalent variable for the assert.
server-tools/instance-manager/instance_options.cc:
Unused.
sql/field.cc:
Unused.
sql/item.cc:
Unused.
sql/log.cc:
Do not ignore the return value of freopen: only set buffer if
reopening succeeds.
Adjust doxygen comment to the right function.
Pass message lenght to log function.
sql/mysqld.cc:
Do not ignore the return value of freopen: only set buffer if
reopening succeeds.
sql/partition_info.cc:
Unused.
sql/slave.cc:
No need to set pointer to the address of '\0'.
sql/spatial.cc:
Unused. Left for historical purposes.
sql/sql_acl.cc:
Unused.
sql/sql_base.cc:
Pointers are always set to the same variables.
sql/sql_parse.cc:
End statement if reading fails.
Store the buffer after it has actually been updated.
sql/sql_repl.cc:
No need to set pointer to the address of '\0'.
sql/sql_show.cc:
Put variable under the same ifdef block.
sql/udf_example.c:
Set null pointer flag appropriately.
storage/csv/ha_tina.cc:
Meaningless dereferences.
storage/example/ha_example.cc:
Return the error since it's available.
storage/myisam/mi_locking.c:
Remove unused and dead code.
Fix warnings flagged by the new warning option -Wunused-but-set-variable
that was added to GCC 4.6 and that is enabled by -Wunused and -Wall. The
option causes a warning whenever a local variable is assigned to but is
later unused. It also warns about meaningless pointer dereferences.
and reverse() function
3 problems fixed :
1. The reported problem : caused by incorrect parsing of
the file as ucs data resulting in wrong length of the parsed
string. Fixed by truncating the invalid trailing bytes
(non-complete multibyte characters) when reading from the file
2. LOAD DATA when reading from a proper UCS2 file wasn't
recognizing the new line characters. Fixed by first looking
if a byte is a new line (or any other special) character before
reading it as a part of a multibyte character.
3. When using user variables to hold the column data in LOAD
DATA the character set of the user variable was set incorrectly
to the database charset. Fixed by setting it to the charset
specified by LOAD DATA (if any).
and reverse() function
3 problems fixed :
1. The reported problem : caused by incorrect parsing of
the file as ucs data resulting in wrong length of the parsed
string. Fixed by truncating the invalid trailing bytes
(non-complete multibyte characters) when reading from the file
2. LOAD DATA when reading from a proper UCS2 file wasn't
recognizing the new line characters. Fixed by first looking
if a byte is a new line (or any other special) character before
reading it as a part of a multibyte character.
3. When using user variables to hold the column data in LOAD
DATA the character set of the user variable was set incorrectly
to the database charset. Fixed by setting it to the charset
specified by LOAD DATA (if any).
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
client/mysqldump.c:
Pass my_free directly as its signature is compatible with the
callback type -- which wasn't the case for free_table_ent.
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
Backport from mysql-pe (of those parts which have not been upmerged from 5.1)
sql/field.cc:
Local scope variable or method argument same as class attribute.
sql/item.cc:
Rename auto variable to avoid name clash.
sql/item.h:
Item_ref::basic_const_item had wrong signature (missing const)
and was thus never called.
sql/partition_info.cc:
Rename, to avoid name clashes.
sql/sql_load.cc:
Rename, to avoid name clashes.
Fixed some bugs introduced in 5.1.47
Disabled some tests until we have merged with latest Xtradb
configure.in:
Added testing if valgrind/memcheck.h exists
storage/pbxt/src/ha_pbxt.cc:
LOCK_plugin is not anymore locked in init
MYSQL_BIN_LOG m_table_map_version member and it's associated
functions were not used in the logic of binlogging and replication,
this patch removed all related code.
sql/log.cc:
removed unused m_table_map_version variable and functions
sql/log.h:
removed unused m_table_map_version variable and functions
sql/log_event.h:
Removed unused LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F flag
sql/sql_class.cc:
Removed unused LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F flag
sql/sql_load.cc:
Removed unused LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F flag
sql/table.cc:
removed unused table_map_version variable
sql/table.h:
removed unused table_map_version variable
MYSQL_BIN_LOG m_table_map_version member and it's associated
functions were not used in the logic of binlogging and replication,
this patch removed all related code.
Conflicts:
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/t/explain.test
Text conflict in sql/net_serv.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_priv.h
Conflicts:
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/t/explain.test
Text conflict in sql/net_serv.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_priv.h
Problem:
item->name was NULL for Item_user_var_as_out_param
which made strcmp(something, item->name) crash in the LOAD XML code.
Fix:
- item_func.h: Adding set_name() in constuctor for Item_user_var_as_out_param
- sql_load.cc: Changing the condition in write_execute_load_query_log_event() which
distiguished between Item_user_var_as_out_param and Item_field
from
if (item->name == NULL)
to
if (item->type() == Item::FIELD_ITEM)
- loadxml.result, loadxml.test: adding tests
Problem:
item->name was NULL for Item_user_var_as_out_param
which made strcmp(something, item->name) crash in the LOAD XML code.
Fix:
- item_func.h: Adding set_name() in constuctor for Item_user_var_as_out_param
- sql_load.cc: Changing the condition in write_execute_load_query_log_event() which
distiguished between Item_user_var_as_out_param and Item_field
from
if (item->name == NULL)
to
if (item->type() == Item::FIELD_ITEM)
- loadxml.result, loadxml.test: adding tests
Iterative patch improvement. Previously committed patch
caused wrong result on Windows. The previous patch also
broke secure_file_priv for symlinks since not all file
paths which must be compared against this variable are
normalized using the same norm.
The server variable opt_secure_file_priv wasn't
normalized properly and caused the operations
LOAD DATA INFILE .. INTO TABLE ..
and
SELECT load_file(..)
to do different interpretations of the
--secure-file-priv option.
The patch moves code to the server initialization
routines so that the path always is normalized
once and only once.
It was also intended that setting the option
to an empty string should be equal to
lifting all previously set restrictions. This
is also fixed by this patch.
mysql-test/r/loaddata.result:
* Removed test code which will currently break the much used --mem feature of mtr.
mysql-test/t/loaddata.test:
* Removed test code which will currently break the much used --mem feature of mtr.
sql/item_strfunc.cc:
* Replaced string comparing code on opt_secure_file_priv with an interface which guarantees that both file paths are normalized using the same norm on all platforms.
sql/mysql_priv.h:
* Added signature for is_secure_file_path()
sql/mysqld.cc:
* New function for checking if a path compatible with the secure path restriction.
* Added initialization of the opt_secure_file_priv variable.
sql/sql_class.cc:
* Replaced string comparing code on opt_secure_file_priv with an interface which guarantees that both file paths are normalized using the same norm on all platforms.
sql/sql_load.cc:
* Replaced string comparing code on opt_secure_file_priv with an interface which guarantees that both file paths are normalized using the same norm on all platforms.
Iterative patch improvement. Previously committed patch
caused wrong result on Windows. The previous patch also
broke secure_file_priv for symlinks since not all file
paths which must be compared against this variable are
normalized using the same norm.
The server variable opt_secure_file_priv wasn't
normalized properly and caused the operations
LOAD DATA INFILE .. INTO TABLE ..
and
SELECT load_file(..)
to do different interpretations of the
--secure-file-priv option.
The patch moves code to the server initialization
routines so that the path always is normalized
once and only once.
It was also intended that setting the option
to an empty string should be equal to
lifting all previously set restrictions. This
is also fixed by this patch.
Conflicts:
Text conflict in configure.in
Text conflict in dbug/dbug.c
Text conflict in mysql-test/r/ps.result
Text conflict in mysql-test/t/ps.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/ha_ndbcluster.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_table.cc
Conflicts:
Text conflict in configure.in
Text conflict in dbug/dbug.c
Text conflict in mysql-test/r/ps.result
Text conflict in mysql-test/t/ps.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/ha_ndbcluster.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_table.cc
Fix for bug #46947 "Embedded SELECT without FOR UPDATE is
causing a lock", with after-review fixes.
SELECT statements with subqueries referencing InnoDB tables
were acquiring shared locks on rows in these tables when they
were executed in REPEATABLE-READ mode and with statement or
mixed mode binary logging turned on.
This was a regression which were introduced when fixing
bug 39843.
The problem was that for tables belonging to subqueries
parser set TL_READ_DEFAULT as a lock type. In cases when
statement/mixed binary logging at open_tables() time this
type of lock was converted to TL_READ_NO_INSERT lock at
open_tables() time and caused InnoDB engine to acquire
shared locks on reads from these tables. Although in some
cases such behavior was correct (e.g. for subqueries in
DELETE) in case of SELECT it has caused unnecessary locking.
This patch tries to solve this problem by rethinking our
approach to how we handle locking for SELECT and subqueries.
Now we always set TL_READ_DEFAULT lock type for all cases
when we read data. When at open_tables() time this lock
is interpreted as TL_READ_NO_INSERT or TL_READ depending
on whether this statement as a whole or call to function
which uses particular table should be written to the
binary log or not (if yes then statement should be properly
serialized with concurrent statements and stronger lock
should be acquired).
Test coverage is added for both InnoDB and MyISAM.
This patch introduces an "incompatible" change in locking
scheme for subqueries used in SELECT ... FOR UPDATE and
SELECT .. IN SHARE MODE.
In 4.1 the server would use a snapshot InnoDB read for
subqueries in SELECT FOR UPDATE and SELECT .. IN SHARE MODE
statements, regardless of whether the binary log is on or off.
If the user required a different type of read (i.e. locking read),
he/she could request so explicitly by providing FOR UPDATE/IN SHARE MODE
clause for each individual subquery.
On of the patches for 5.0 broke this behaviour (which was not documented
or tested), and started to use locking reads fora all subqueries in SELECT ...
FOR UPDATE/IN SHARE MODE. This patch restored 4.1 behaviour.
mysql-test/include/check_concurrent_insert.inc:
Added auxiliary script which allows to check if statement
reading table allows concurrent inserts in it.
mysql-test/include/check_no_concurrent_insert.inc:
Added auxiliary script which allows to check that statement
reading table doesn't allow concurrent inserts in it.
mysql-test/include/check_no_row_lock.inc:
Added auxiliary script which allows to check if statement
reading table doesn't take locks on its rows.
mysql-test/include/check_shared_row_lock.inc:
Added auxiliary script which allows to check if statement
reading table takes shared locks on some of its rows.
mysql-test/r/bug39022.result:
After bug #46947 'Embedded SELECT without FOR UPDATE is
causing a lock' was fixed test case for bug 39022 has to
be adjusted in order to trigger execution path on which
original problem was encountered.
mysql-test/r/innodb_mysql_lock2.result:
Added coverage for handling of locking in various cases when
we read data from InnoDB tables (includes test case for
bug #46947 'Embedded SELECT without FOR UPDATE is causing a
lock').
mysql-test/r/lock_sync.result:
Added coverage for handling of locking in various cases when
we read data from MyISAM tables.
mysql-test/t/bug39022.test:
After bug #46947 'Embedded SELECT without FOR UPDATE is
causing a lock' was fixed test case for bug 39022 has to
be adjusted in order to trigger execution path on which
original problem was encountered.
mysql-test/t/innodb_mysql_lock2.test:
Added coverage for handling of locking in various cases when
we read data from InnoDB tables (includes test case for
bug #46947 'Embedded SELECT without FOR UPDATE is causing a
lock').
mysql-test/t/lock_sync.test:
Added coverage for handling of locking in various cases when
we read data from MyISAM tables.
sql/log_event.cc:
Since LEX::lock_option member was removed we no longer can
rely on its value in Load_log_event::print_query() to
determine that log event correponds to LOAD DATA CONCURRENT
statement (this was not correct in all situations anyway).
A new Load_log_event's member was introduced as a replacement.
It is initialized at event object construction time and
explicitly indicates whether LOAD DATA was concurrent.
sql/log_event.h:
Since LEX::lock_option member was removed we no longer can
rely on its value in Load_log_event::print_query() to
determine that log event correponds to LOAD DATA CONCURRENT
statement (this was not correct in all situations anyway).
A new Load_log_event's member was introduced as a replacement.
It is initialized at event object construction time and
explicitly indicates whether LOAD DATA was concurrent.
sql/sp_head.cc:
sp_head::reset_lex():
Before parsing substatement reset part of parser state
which needs this (e.g. set Yacc_state::m_lock_type to
default value).
sql/sql_acl.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed (for example, when we are logging
statement to the binary log while having Query_tables_list
reset and backed up).
sql/sql_base.cc:
Changed read_lock_type_for_table() to return a weak TL_READ
type of lock in cases when we are executing statement which
won't update tables directly and table doesn't belong to
statement's prelocking list and thus can't be used by a
stored function. It is OK to do so since in this case table
won't be used by statement or function call which will be
written to the binary log, so serializability requirements
for it can be relaxed.
One of results from this change is that SELECTs on InnoDB
tables no longer takes shared row locks for tables which
are used in subqueries (i.e. bug #46947 is fixed).
Another result is that for similar SELECTs on MyISAM tables
concurrent inserts are allowed.
In order to implement this change signature of
read_lock_type_for_table() function was changed to take
pointers to Query_tables_list and TABLE_LIST objects.
sql/sql_base.h:
- Function read_lock_type_for_table() now takes pointers
to Query_tables_list and TABLE_LIST elements as its
arguments since to correctly determine lock type it needs
to know what statement is being performed and whether table
element for which lock type to be determined belongs to
prelocking list.
sql/sql_lex.cc:
- Removed LEX::lock_option and st_select_lex::lock_option
members. Places in parser that were using them now use
Yacc_state::m_lock_type instead.
- To emphasize that LEX::sql_command member is used during
process of opening and locking of tables it was moved to
Query_tables_list class. It is now reset by
Query_tables_list::reset_query_tables_list() method.
sql/sql_lex.h:
- Removed st_select_lex::lock_option member as there is no
real need for per-SELECT lock type (HIGH_PRIORITY option
should apply to the whole statement. FOR UPDATE/LOCK IN
SHARE MODE clauses can be handled without this member).
The main effect which was achieved by introduction of this
member, i.e. using TL_READ_DEFAULT lock type for
subqueries, is now achieved by setting LEX::lock_option
(or rather its replacement - Yacc_state::m_lock_type) to
TL_READ_DEFAULT in almost all cases.
- To emphasize that LEX::sql_command member is used during
process of opening and locking of tables it was moved to
Query_tables_list class.
- Replaced LEX::lock_option with Yacc_state::m_lock_type
in order to emphasize that this value is relevant only
during parsing. Unlike for LEX::lock_option the default
value for Yacc_state::m_lock_type is TL_READ_DEFAULT.
Note that for cases when it is OK to take a "weak" read
lock (e.g. simple SELECT) this lock type will be converted
to TL_READ at open_tables() time. So this change won't
cause negative change in behavior for such statements.
OTOH this change ensures that, for example, for SELECTs
which are used in stored functions TL_READ_NO_INSERT lock
is taken when necessary and as result calls to such stored
functions can be written to the binary log with correct
serialization.
sql/sql_load.cc:
Load_log_event constructor now requires a parameter that
indicates whether LOAD DATA is concurrent.
sql/sql_parse.cc:
LEX::lock_option was replaced with Yacc_state::m_lock_type.
And instead of resetting the latter implicitly in
mysql_init_multi_delete() we do it explicitly in the
places in parser which call this function.
sql/sql_priv.h:
- To be able more easily distinguish high-priority SELECTs
in st_select_lex::print() method added flag for
HIGH_PRIORITY option.
sql/sql_select.cc:
Changed code not to rely on LEX::lock_option to determine
that it is high-priority SELECT. It was replaced with
Yacc_state::m_lock_type which is accessible only at
parse time. So instead of LEX::lock_option we now rely
on a newly introduced flag for st_select_lex::options -
SELECT_HIGH_PRIORITY.
sql/sql_show.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed.
sql/sql_table.cc:
Since LEX::reset_query_tables_list() now also resets
LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore value of this
member when this method is called by mysql_admin_table(),
to make this code safe for re-execution.
sql/sql_trigger.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed (for example, when we are logging
statement to the binary log while having Query_tables_list
reset and backed up).
sql/sql_update.cc:
Function read_lock_type_for_table() now takes pointers
to Query_tables_list and TABLE_LIST elements as its
arguments since to correctly determine lock type it needs
to know what statement is being performed and whether table
element for which lock type to be determined belongs to
prelocking list.
sql/sql_yacc.yy:
- Removed st_select_lex::lock_option member as there is no
real need for per-SELECT lock type (HIGH_PRIORITY option
should apply to the whole statement. FOR UPDATE/LOCK IN
SHARE MODE clauses can be handled without this member).
The main effect which was achieved by introduction of this
member, i.e. using TL_READ_DEFAULT lock type for
subqueries, is now achieved by setting LEX::lock_option
(or rather its replacement - Yacc_state::m_lock_type) to
TL_READ_DEFAULT in almost all cases.
- Replaced LEX::lock_option with Yacc_state::m_lock_type
in order to emphasize that this value is relevant only
during parsing. Unlike for LEX::lock_option the default
value for Yacc_state::m_lock_type is TL_READ_DEFAULT.
Note that for cases when it is OK to take a "weak" read
lock (e.g. simple SELECT) this lock type will be converted
to TL_READ at open_tables() time. So this change won't
cause negative change in behavior for such statements.
OTOH this change ensures that, for example, for SELECTs
which are used in stored functions TL_READ_NO_INSERT lock
is taken when necessary and as result calls to such stored
functions can be written to the binary log with correct
serialization.
- To be able more easily distinguish high-priority SELECTs
in st_select_lex::print() method we now use new flag
in st_select_lex::options bit-field.
Fix for bug #46947 "Embedded SELECT without FOR UPDATE is
causing a lock", with after-review fixes.
SELECT statements with subqueries referencing InnoDB tables
were acquiring shared locks on rows in these tables when they
were executed in REPEATABLE-READ mode and with statement or
mixed mode binary logging turned on.
This was a regression which were introduced when fixing
bug 39843.
The problem was that for tables belonging to subqueries
parser set TL_READ_DEFAULT as a lock type. In cases when
statement/mixed binary logging at open_tables() time this
type of lock was converted to TL_READ_NO_INSERT lock at
open_tables() time and caused InnoDB engine to acquire
shared locks on reads from these tables. Although in some
cases such behavior was correct (e.g. for subqueries in
DELETE) in case of SELECT it has caused unnecessary locking.
This patch tries to solve this problem by rethinking our
approach to how we handle locking for SELECT and subqueries.
Now we always set TL_READ_DEFAULT lock type for all cases
when we read data. When at open_tables() time this lock
is interpreted as TL_READ_NO_INSERT or TL_READ depending
on whether this statement as a whole or call to function
which uses particular table should be written to the
binary log or not (if yes then statement should be properly
serialized with concurrent statements and stronger lock
should be acquired).
Test coverage is added for both InnoDB and MyISAM.
This patch introduces an "incompatible" change in locking
scheme for subqueries used in SELECT ... FOR UPDATE and
SELECT .. IN SHARE MODE.
In 4.1 the server would use a snapshot InnoDB read for
subqueries in SELECT FOR UPDATE and SELECT .. IN SHARE MODE
statements, regardless of whether the binary log is on or off.
If the user required a different type of read (i.e. locking read),
he/she could request so explicitly by providing FOR UPDATE/IN SHARE MODE
clause for each individual subquery.
On of the patches for 5.0 broke this behaviour (which was not documented
or tested), and started to use locking reads fora all subqueries in SELECT ...
FOR UPDATE/IN SHARE MODE. This patch restored 4.1 behaviour.
The server variable opt_secure_file_priv wasn't
normalized properly and caused the operations
LOAD DATA INFILE .. INTO TABLE ..
and
SELECT load_file(..)
to do different interpretations of the
--secure-file-priv option.
The patch moves code to the server initialization
routines so that the path always is normalized
once and only once.
It was also intended that setting the option
to an empty string should be equal to
lifting all previously set restrictions. This
is also fixed by this patch.
sql/mysqld.cc:
* If --secure_file_option is an empty string then the option variable
should be unset.
* opt_secure_file_option should be normalized once when the server starts.
sql/sql_load.cc:
* moved variable normalization code to fix_paths()
