Handling BF abort for prepared statement execution so that EXECUTE processing will continue
until parameter setup is complete, before BF abort bails out the statement execution.
THD class has new boolean member: wsrep_delayed_BF_abort, which is set if BF abort is observed
in do_command() right after reading client's packet, and if the client has sent PS execute command.
In such case, the deadlock error is not returned immediately back to client, but the PS execution
will be started. However, the PS execution loop, will now check if wsrep_delayed_BF_abort is set, and
stop the PS execution after the type information has been assigned for the PS.
With this, the PS protocol type information, which is present in the first PS EXECUTE command, is not lost
even if the first PS EXECUTE command was marked to abort.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
extra2_read_len resolved by keeping the implementation
in sql/table.cc by exposed it for use by ha_partition.cc
Remove identical implementation in unireg.h
(ref: bfed2c7d57)
Problem:
Parse-time conversion from binary to tricky character sets like utf32
produced ill-formed strings. So, later a chash happened in debug builds,
or a wrong SHOW CREATE TABLE was returned in release builds.
Fix:
1. Backporting a few methods from 10.3:
- THD::check_string_for_wellformedness()
- THD::convert_string() overloads
- THD::make_text_string_connection()
2. Adding a new method THD::reinterpret_string_from_binary(),
which makes sure to either returns a well-formed string
(optionally prepending with zero bytes), or returns an error.
The first step for deprecating innodb_autoinc_lock_mode(see MDEV-27844) is:
- to switch statement binlog format to ROW if binlog format is MIXED and
the statement changes autoincremented fields
- issue warnings if innodb_autoinc_lock_mode == 2 and binlog format is
STATEMENT
The warning out of OPTIMIZE
Statement is unsafe because it uses a system function
was indeed counterfactual and was resulted by checking an
insufficiently strict property of lex' sql_command_flags.
Fixed with deploying an additional checking of weather
the current sql command that modifes a share->non_determinstic_insert
table is capable of generating ROW format events.
The extra check rules out the unsafety to OPTIMIZE et al, while the
existing check continues to do so to CREATE TABLE (which is
perculiarly tagged as ROW-event generative sql command).
As a side effect sql_sequence.binlog test gets corrected and
binlog_stm_unsafe_warning.test is reinforced to add up
an unsafe CREATE..SELECT test.
GCC 12 complains if a reference to an uninitialized object is
being passed to a constructor. The mysql_mutex_t, mysql_cond_t
would be initialized in the constructor body, which is executed
after the initializer list. There is no problem passing a pointer
instead of a reference. The wrapper classes do not dereference
the pointers in the constructor or destructor, so there does not
appear to be any correctness issue.
Mutex order violation when wsrep bf thread kills a conflicting trx,
the stack is
wsrep_thd_LOCK()
wsrep_kill_victim()
lock_rec_other_has_conflicting()
lock_clust_rec_read_check_and_lock()
row_search_mvcc()
ha_innobase::index_read()
ha_innobase::rnd_pos()
handler::ha_rnd_pos()
handler::rnd_pos_by_record()
handler::ha_rnd_pos_by_record()
Rows_log_event::find_row()
Update_rows_log_event::do_exec_row()
Rows_log_event::do_apply_event()
Log_event::apply_event()
wsrep_apply_events()
and mutexes are taken in the order
lock_sys->mutex -> victim_trx->mutex -> victim_thread->LOCK_thd_data
When a normal KILL statement is executed, the stack is
innobase_kill_query()
kill_handlerton()
plugin_foreach_with_mask()
ha_kill_query()
THD::awake()
kill_one_thread()
and mutexes are
victim_thread->LOCK_thd_data -> lock_sys->mutex -> victim_trx->mutex
This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.
In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.
TOI replication is used, in this approach, purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.
This also fixed unprotected calls to wsrep_thd_abort
that will use wsrep_abort_transaction. This is fixed
by holding THD::LOCK_thd_data while we abort transaction.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Mutex order violation when wsrep bf thread kills a conflicting trx,
the stack is
wsrep_thd_LOCK()
wsrep_kill_victim()
lock_rec_other_has_conflicting()
lock_clust_rec_read_check_and_lock()
row_search_mvcc()
ha_innobase::index_read()
ha_innobase::rnd_pos()
handler::ha_rnd_pos()
handler::rnd_pos_by_record()
handler::ha_rnd_pos_by_record()
Rows_log_event::find_row()
Update_rows_log_event::do_exec_row()
Rows_log_event::do_apply_event()
Log_event::apply_event()
wsrep_apply_events()
and mutexes are taken in the order
lock_sys->mutex -> victim_trx->mutex -> victim_thread->LOCK_thd_data
When a normal KILL statement is executed, the stack is
innobase_kill_query()
kill_handlerton()
plugin_foreach_with_mask()
ha_kill_query()
THD::awake()
kill_one_thread()
and mutexes are
victim_thread->LOCK_thd_data -> lock_sys->mutex -> victim_trx->mutex
This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.
In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.
TOI replication is used, in this approach, purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.
This also fixed unprotected calls to wsrep_thd_abort
that will use wsrep_abort_transaction. This is fixed
by holding THD::LOCK_thd_data while we abort transaction.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Mutex order violation when wsrep bf thread kills a conflicting trx,
the stack is
wsrep_thd_LOCK()
wsrep_kill_victim()
lock_rec_other_has_conflicting()
lock_clust_rec_read_check_and_lock()
row_search_mvcc()
ha_innobase::index_read()
ha_innobase::rnd_pos()
handler::ha_rnd_pos()
handler::rnd_pos_by_record()
handler::ha_rnd_pos_by_record()
Rows_log_event::find_row()
Update_rows_log_event::do_exec_row()
Rows_log_event::do_apply_event()
Log_event::apply_event()
wsrep_apply_events()
and mutexes are taken in the order
lock_sys->mutex -> victim_trx->mutex -> victim_thread->LOCK_thd_data
When a normal KILL statement is executed, the stack is
innobase_kill_query()
kill_handlerton()
plugin_foreach_with_mask()
ha_kill_query()
THD::awake()
kill_one_thread()
and mutexes are
victim_thread->LOCK_thd_data -> lock_sys->mutex -> victim_trx->mutex
This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.
In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.
TOI replication is used, in this approach, purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.
This also fixed unprotected calls to wsrep_thd_abort
that will use wsrep_abort_transaction. This is fixed
by holding THD::LOCK_thd_data while we abort transaction.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Mutex order violation when wsrep bf thread kills a conflicting trx,
the stack is
wsrep_thd_LOCK()
wsrep_kill_victim()
lock_rec_other_has_conflicting()
lock_clust_rec_read_check_and_lock()
row_search_mvcc()
ha_innobase::index_read()
ha_innobase::rnd_pos()
handler::ha_rnd_pos()
handler::rnd_pos_by_record()
handler::ha_rnd_pos_by_record()
Rows_log_event::find_row()
Update_rows_log_event::do_exec_row()
Rows_log_event::do_apply_event()
Log_event::apply_event()
wsrep_apply_events()
and mutexes are taken in the order
lock_sys->mutex -> victim_trx->mutex -> victim_thread->LOCK_thd_data
When a normal KILL statement is executed, the stack is
innobase_kill_query()
kill_handlerton()
plugin_foreach_with_mask()
ha_kill_query()
THD::awake()
kill_one_thread()
and mutexes are
victim_thread->LOCK_thd_data -> lock_sys->mutex -> victim_trx->mutex
This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.
In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.
TOI replication is used, in this approach, purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.
This also fixed unprotected calls to wsrep_thd_abort
that will use wsrep_abort_transaction. This is fixed
by holding THD::LOCK_thd_data while we abort transaction.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Dead code cleanup:
part_info->num_parts usage was wrong and working incorrectly in
mysql_drop_partitions() because num_parts is already updated in
prep_alter_part_table(). We don't have to update part_info->partitions
because part_info is destroyed at alter_partition_lock_handling().
Cleanups:
- DBUG_EVALUATE_IF() macro replaced by shorter form DBUG_IF();
- Typo in ER_KEY_COLUMN_DOES_NOT_EXITS.
Refactorings:
- Splitted write_log_replace_delete_frm() into write_log_delete_frm()
and write_log_replace_frm();
- partition_info via DDL_LOG_STATE;
- set_part_info_exec_log_entry() removed.
DBUG_EVALUATE removed
DBUG_EVALUTATE was only added for consistency together with
DBUG_EVALUATE_IF. It is not used anywhere in the code.
DBUG_SUICIDE() fix on release build
On release DBUG_SUICIDE() was statement. It was wrong as
DBUG_SUICIDE() is used in expression context.
procedure
Analysis: m_current_row_for_warning is reset to 1 during cleanup phase of
stored procedure. When we perform a copy because some statement of procedure
created warning, this reset value is passed to push_warning().
Hence the output is always 1.
Fix: Add a parameter in relevant functions to pass correct value of
row_number and don't use m_current_row_for_warning directly.
This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.
In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.
TOI replication is used, in this approach, purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.
This patch also fixes mutex locking order and unprotected
THD member accesses on bf aborting case. We try to hold
THD::LOCK_thd_data during bf aborting. Only case where it
is not possible is at wsrep_abort_transaction before
call wsrep_innobase_kill_one_trx where we take InnoDB
mutexes first and then THD::LOCK_thd_data.
This will also fix possible race condition during
close_connection and while wsrep is disconnecting
connections.
Added wsrep_bf_kill_debug test case
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Avoid reading uninitialized memory by thd_get_error_context_description().
Note, that THD::real_id can't be initialized at this stage, so it will be zeroed.
use existing Warning_info::m_current_row_for_warning instead
of a newly introduced counter.
But use m_current_row_for_warning to count rows also in the parser
and during prepare.
Extended the parser for GET DIAGNOSTICS to use ERROR_INDEX to get
warning/error index.
Error information is stored in Sql_condition. So it can be used to
store the index of warning/error too. THD::current_insert_index keeps a
track of count for each row that is processed or going to be inserted in the
table (or first row in case of prepare phase). When an error occurs,
first we need to fetch corrected error index (using correct_error_index())
for an error number. This is needed because in prepare phase, the error
may not be because of rows/values. In such case, correct value of
error_index should be 0. Once correct value if fetched, assign it to
Sql_condition::error_index when the object is created during error/warning.
This error_index variable is returned when ERROR_INDEX is used in
GET DIAGNOSTICS.
Allow the caller to have current_thd. Also do not store
PSI_CALL_get_thread() in the new THD, it is a thread local storage variable
that can become invalid any time, we do not control the lifetime of the
caller's thread.
In commit 1bd681c8b3 (MDEV-25506 part 3)
we introduced a "fake instant timeout" when a transaction would wait
for a table or record lock while holding dict_sys.latch. This prevented
a deadlock of the server but could cause bogus errors for operations
on the InnoDB persistent statistics tables.
A better fix is to ensure that whenever a transaction is being
executed in the InnoDB internal SQL parser (which will for now
require dict_sys.latch to be held), it will already have acquired
all locks that could be required for the execution. So, we will
acquire the following locks upfront, before acquiring dict_sys.latch:
(1) MDL on the affected user table (acquired by the SQL layer)
(2) If applicable (not for RENAME TABLE): InnoDB table lock
(3) If persistent statistics are going to be modified:
(3.a) MDL_SHARED on mysql.innodb_table_stats, mysql.innodb_index_stats
(3.b) exclusive table locks on the statistics tables
(4) Exclusive table locks on the InnoDB data dictionary tables
(not needed in ANALYZE TABLE and the like)
Note: Acquiring exclusive locks on the statistics tables may cause
more locking conflicts between concurrent DDL operations.
Notably, RENAME TABLE will lock the statistics tables
even if no persistent statistics are enabled for the table.
DROP DATABASE will only acquire locks on statistics tables if
persistent statistics are enabled for the tables on which the
SQL layer is invoking ha_innobase::delete_table().
For any "garbage collection" in innodb_drop_database(), a timeout
while acquiring locks on the statistics tables will result in any
statistics not being deleted for any tables that the SQL layer
did not know about.
If innodb_defragment=ON, information may be written to the statistics
tables even for tables for which InnoDB persistent statistics are
disabled. But, DROP TABLE will no longer attempt to delete that
information if persistent statistics are not enabled for the table.
This change should also fix the hangs related to InnoDB persistent
statistics and STATS_AUTO_RECALC (MDEV-15020) as well as
a bug that running ALTER TABLE on the statistics tables
concurrently with running ALTER TABLE on InnoDB tables could
cause trouble.
lock_rec_enqueue_waiting(), lock_table_enqueue_waiting():
Do not issue a fake instant timeout error when the transaction
is holding dict_sys.latch. Instead, assert that the dict_sys.latch
is never being held here.
lock_sys_tables(): A new function to acquire exclusive locks on all
dictionary tables, in case DROP TABLE or similar operation is
being executed. Locking non-hard-coded tables is optional to avoid
a crash in row_merge_drop_temp_indexes(). The SYS_VIRTUAL table was
introduced in MySQL 5.7 and MariaDB Server 10.2. Normally, we require
all these dictionary tables to exist before executing any DDL, but
the function row_merge_drop_temp_indexes() is an exception.
When upgrading from MariaDB Server 10.1 or MySQL 5.6 or earlier,
the table SYS_VIRTUAL would not exist at this point.
ha_innobase::commit_inplace_alter_table(): Invoke
log_write_up_to() while not holding dict_sys.latch.
dict_sys_t::remove(), dict_table_close(): No longer try to
drop index stubs that were left behind by aborted online ADD INDEX.
Such indexes should be dropped from the InnoDB data dictionary by
row_merge_drop_indexes() as part of the failed DDL operation.
Stubs for aborted indexes may only be left behind in the
data dictionary cache.
dict_stats_fetch_from_ps(): Use a normal read-only transaction.
ha_innobase::delete_table(), ha_innobase::truncate(), fts_lock_table():
While waiting for purge to stop using the table,
do not hold dict_sys.latch.
ha_innobase::delete_table(): Implement a work-around for the rollback
of ALTER TABLE...ADD PARTITION. MDL_EXCLUSIVE would not be held if
ALTER TABLE hits lock_wait_timeout while trying to upgrade the MDL
due to a conflicting LOCK TABLES, such as in the first ALTER TABLE
in the test case of Bug#53676 in parts.partition_special_innodb.
Therefore, we must explicitly stop purge, because it would not be
stopped by MDL.
dict_stats_func(), btr_defragment_chunk(): Allocate a THD so that
we can acquire MDL on the InnoDB persistent statistics tables.
mysqltest_embedded: Invoke ha_pre_shutdown() before free_used_memory()
in order to avoid ASAN heap-use-after-free related to acquire_thd().
trx_t::dict_operation_lock_mode: Changed the type to bool.
row_mysql_lock_data_dictionary(), row_mysql_unlock_data_dictionary():
Implemented as macros.
rollback_inplace_alter_table(): Apply an infinite timeout to lock waits.
innodb_thd_increment_pending_ops(): Wrapper for
thd_increment_pending_ops(). Never attempt async operation for
InnoDB background threads, such as the trx_t::commit() in
dict_stats_process_entry_from_recalc_pool().
lock_sys_t::cancel(trx_t*): Make dictionary transactions immune to KILL.
lock_wait(): Make dictionary transactions immune to KILL, and to
lock wait timeout when waiting for locks on dictionary tables.
parts.partition_special_innodb: Use lock_wait_timeout=0 to instantly
get ER_LOCK_WAIT_TIMEOUT.
main.mdl: Filter out MDL on InnoDB persistent statistics tables
Reviewed by: Thirunarayanan Balathandayuthapani
