The SHOW VARIABLES LIKE .../SELECT @@/SELECT ... FROM INFORMATION_SCHEMA.VARIABLES
were assuming that all the system variables are in system charset (UTF-8).
However the variables that are settable through command line will have a different
character set (character_set_filesystem).
Fixed the server to remember the correct character set of basedir, datadir, tmpdir,
ssl, plugin_dir, slave_load_tmpdir, innodb variables; init_connect and init_slave
variables and use it when processing data.
status
The problem appears to be a race condition, when service is being
stopped right after startup. We set the service status to SERVICE_RUNNING
way too early it cannot yet handle stop requests - initialization has
not finished and hEventShutdown that signals server to stop is not yet
created. If somebody issues "net stop MySQL" at this time, MySQL is not
informed about the stop and continues to run as usual, while
NTService::ServiceMain() stucks forever waiting for mysql's "main" thread
to finish.
Solution is to remain in SERVICE_START_PENDING status until after server
initialization is fully complete and only then change the status to
SERVICE_RUNNING. In SERVICE_START_PENDING we do not accept service control
requests, i.e it is not possible to stop service in that time.
When running Stored Routines the Status Variable "Questions" was wrongly
incremented. According to the manual it should contain the "number of
statements that clients have sent to the server"
Introduced a new status variable 'questions' to replace the query_id
variable which currently corresponds badly with the number of statements
sent by the client.
The new behavior is ment to be backward compatible with 4.0 and at the
same time work with new features in a similar way.
This is a backport from 6.0
test_if_data_home_dir fixed to look into real path.
Checks added to mi_open for symlinks into data home directory.
per-file messages:
include/my_sys.h
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
my_is_symlink interface added
include/myisam.h
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
myisam_test_invalid_symlink interface added
myisam/mi_check.c
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
mi_open_datafile calls modified
myisam/mi_open.c
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
code added to mi_open to check for symlinks into data home directory.
mi_open_datafile now accepts 'original' file path to check if it's
an allowed symlink.
myisam/mi_static.c
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
myisam_test_invlaid_symlink defined
myisam/myisamchk.c
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
mi_open_datafile call modified
myisam/myisamdef.h
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
mi_open_datafile interface modified - 'real_path' parameter added
mysql-test/r/symlink.test
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
error codes corrected as some patch now rejected pointing inside datahome
mysql-test/r/symlink.result
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
error messages corrected in the result
mysys/my_symlink.c
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
my_is_symlink() implementsd
my_realpath() now returns the 'realpath' even if a file isn't a symlink
sql/mysql_priv.h
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
test_if_data_home_dir interface
sql/mysqld.cc
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
myisam_test_invalid_symlik set with the 'test_if_data_home_dir'
sql/sql_parse.cc
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
error messages corrected
test_if_data_home_dir code fixed
added new function test_if_data_home_dir() which checks that
path does not contain mysql data home directory.
Using of mysql data home directory in
DATA DIRECTORY & INDEX DIRECTORY is disallowed.
- Replace per-thread signal()'s with SetUnhandledExceptionFilter().
The only remaining signal() is for SIGABRT (default abort()
handler in VS2005 is broken, i.e removes user exception filter)
- remove MessageBox()'es from error handling code
- Windows port for print_stacktrace() and write_core()
- Cleanup, removed some unused functions
and my_innodb_commit_concurrency global variables.
Type of the my_innodb_autoextend_increment and the
my_innodb_commit_concurrency variables has been changed to
GET_ULONG.
Default values of variables were not subject to upper/lower bounds
and step, while setting variables was. Bounds and step are also
applied to defaults now; defaults are corrected quietly, values
given by the user are corrected, and a correction-warning is thrown
as needed. Lastly, very large values could wrap around, starting
from 0 again. They are bounded at the maximum value for the
respective data-type now if no lower maximum is specified in the
variable's definition.
Denormalized DOUBLE-s can't be properly handled by old MIPS processors.
So we need to enable specific mode for them so IRIX will do use
software round to handle such numbers.
When the server was out of memory it crashed because of invalid memory access.
This patch adds detection for failed memory allocations and make the server
output a proper error message.
Bug #31956 auto increment bugs in MySQL Cluster: Added utility method and constant for internal prefetch default
ndb_auto_increment.result:
BitKeeper file /home/marty/MySQL/mysql-5.0-ndb/mysql-test/r/ndb_auto_increment.result
mysqld.cc:
Bug #25176 Trying to set ndb_autoincrement_prefetch_sz always fails: Changed pointer to max value
Bug #31956 auto increment bugs in MySQL Cluster: Changed meaning of ndb_autoincrement_prefetch_sz to specify prefetch between statements, changed default to 1 (with internal prefetch to at least 32 inside a statement)
ndb_insert.test, ndb_insert.result:
Moved auto_increment tests to ndb_auto_increment.test
ndb_auto_increment.test:
BitKeeper file /home/marty/MySQL/mysql-5.0-ndb/mysql-test/t/ndb_auto_increment.test
ha_ndbcluster.cc:
Bug #31956 auto increment bugs in MySQL Cluster: Changed meaning of ndb_autoincrement_prefetch_sz to specify prefetch between statements, changed default to 1 (with internal prefetch to at least 32 inside a statement), added handling of updates of pk/unique key with auto_increment
Bug #32055 Cluster does not handle auto inc correctly with insert ignore statement
doesn't recognize it
This is a 5.0 version of the patch, it will be null-merged to 5.1
Problem:
'log' and 'log_slow_queries' were "fixed" variables, i.e. they showed up
in SHOW VARIABLES, but could not be used in expressions like
"select @@log". Also, using them in the SET statement produced an
incorrect "unknown system variable" error.
Solution:
Make 'log' and 'log_slow_queries' read-only dynamic variables to make
them available for use in expressions, and produce a correct error
about the variable being read-only when used in the SET statement.
Options to mysqld were not processed correctly because switch statement
was missing some "break"s. CS adds them.
No test case; would require .opt file and server restart. Manually tested.
Our web server has been restructured several times, and references
to it in our source code has stayed the same. This patch from Paul
DuBois updates all URLs to modern semantics.
Add --skip-innodb-adaptive-hash-index option, which is a way to
work around the bug (by disabling the adaptive hash feature entirely).
This may be useful even once the bug is fixed, for benchmarking purposes.
There are some workloads for which the adaptive hash index is not effective.
make sure that if builder configured with a non-standard (!= 3306)
default TCP port that value actually gets used throughout. if they
didn't configure a value, assume "use a sensible default", which
will be read from /etc/services or, failing that, from the factory
default. That makes the order of preference
- command-line option
- my.cnf, where applicable
- $MYSQL_TCP_PORT environment variable
- /etc/services (unless configured --with-tcp-port)
- default port (--with-tcp-port=... or factory default)
The patch limits read_buffer_size and read_rnd_buffer_size by 2 GB on all platforms for the following reasons:
- I/O code in mysys, code in mf_iocache.c and in some storage engines do not currently work with sizes > 2 GB for those buffers
- even if the above had been fixed, Windows POSIX read() and write() calls are not 2GB-safe, so setting those buffer to sizes > 2GB would not work correctly on 64-bit Windows.
