If translation table present when we materialize the derived table then
change it to point to the materialized table.
Added debug info to see really what happens with what derived.
* changed thd_binlog_format to return configured binlog format in wsrep execution,
regardless of binlogging setting (i.e. with or without binlogging)
* thd_binlog_format is used in innobase::write_row(), and would return confusing
result there when log_bin==OFF
- Fix win64 pointer truncation warnings
(usually coming from misusing 0x%lx and long cast in DBUG)
- Also fix printf-format warnings
Make the above mentioned warnings fatal.
- fix pthread_join on Windows to set return value.
* changed thd_binlog_format to return configured binlog format in wsrep execution,
regardless of binlogging setting (i.e. with or without binlogging)
* thd_binlog_format is used in innobase::write_row(), and would return confusing
result there when log_bin==OFF
Was reported as 'rpl.rpl_gtid_stop_start fails with Valgrind in buildbot and outside'.
The 'Conditional jump or move depends on uninitialized value' valgrind complaint is valid
and means THD::m_current_stage_key that is not initialized indeed by constructor.
Fixed with its initialization added to the initializer list of
THD::THD. Double checked with mysql to have found a similar fixes for
the very same issue which was discovered after P_S merge to Maria
(60589aeee where the member is introduced) had been done.
For running the Galera tests, the variable my_disable_leak_check
was set to true in order to avoid assertions due to memory leaks
at shutdown.
Some adjustments due to MDEV-13625 (merge InnoDB tests from MySQL 5.6)
were performed. The most notable behaviour changes from 10.0 and 10.1
are the following:
* innodb.innodb-table-online: adjustments for the DROP COLUMN
behaviour change (MDEV-11114, MDEV-13613)
* innodb.innodb-index-online-fk: the removal of a (1,NULL) record
from the result; originally removed in MySQL 5.7 in the
Oracle Bug #16244691 fix
377774689b
* innodb.create-index-debug: disabled due to MDEV-13680
(the MySQL Bug #77497 fix was not merged from 5.6 to 5.7.10)
* innodb.innodb-alter-autoinc: MariaDB 10.2 behaves like MySQL 5.6/5.7,
while MariaDB 10.0 and 10.1 assign different values when
auto_increment_increment or auto_increment_offset are used.
Also MySQL 5.6/5.7 exhibit different behaviour between
LGORITHM=INPLACE and ALGORITHM=COPY, so something needs to be tested
and fixed in both MariaDB 10.0 and 10.2.
* innodb.innodb-wl5980-alter: disabled because it would trigger an
InnoDB assertion failure (MDEV-13668 may need additional effort in 10.2)
Merged from mysql-wsrep-bugs following:
GCF-1058 MTR test galera.MW-86 fails on repeated runs
Wait for the sync point sync.wsrep_apply_cb to be reached before
executing the test and clearing the debug flag sync.wsrep_apply_cb.
The race scenario:
Intended behavior:
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
node2 (background): consume the signal
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - ok
What happens occasionally (unexpected):
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
// The background INSERT still has _not_ reached the place where it starts
// waiting for the signal:
// DBUG_EXECUTE_IF("sync.wsrep_apply_cb", "now wait_for...");
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
// The background INSERT reaches DBUG_EXECUTE_IF("sync.wsrep_apply_cb", ...)
// but sync.wsrep_apply_cb has already been cleared and the "wait" code is not
// executed. The signal remains unconsumed.
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - failure, signal.wsrep_apply_cb is
pending (not consumed)
Remove MW-360 test case as it is not intended for MariaDB (uses
MySQL GTID).
The problem was that the introduction of max-thread-mem-used can cause
an allocation error very early, even before mysql_parse() is called.
As mysql_parse() calls thd->reset_for_next_command(), which called
clear_error(), the error number was lost.
Fixed by adding an option to have unique messages for each KILL
signal and change max-thread-mem-used to use this new feature.
This removes a lot of problems with the original approach, where
one could get errors signaled silenty almost any time.
ixed by moving clear_error() from reset_for_next_command() to
do_command(), before any memory allocation for the thread.
Related changes:
- reset_for_next_command() now have an optional parameter if we should
call clear_error() or not. By default it's called, but not anymore from
dispatch_command() which was the original problem.
- Added optional paramater to clear_error() to force calling of
reset_diagnostics_area(). Before clear_error() only called
reset_diagnostics_area() if there was no error, so we normally
called reset_diagnostics_area() twice.
- This change removed several duplicated calls to clear_error()
when starting a query.
- Reset max_mem_used on COM_QUIT, to protect against kill during
quit.
- Use fatal_error() instead of setting is_fatal_error (cleanup)
- Set fatal_error if max_thead_mem_used is signaled.
(Same logic we use for other places where we are out of resources)
Change the semantics of thd_get_error_context_description().
It no longer expects the caller to lock LOCK_thread_count
(no caller ever did that anyway), but takes care of it internally.
don't use thd->query_id check in background purge threads
(it doesn't work, because thd->query_id is never incremented there)
instead use thd->open_tables directly, there can be only one table
there anyway, and this is the table opened by this purge thread.
This could happen when the client connection dies while sending a progress
report packet.
Fixed by not raising any errors when sending progress packets.
and
MDEV-13011 Server crashes in THD::handle_condition or Assertion `! is_set() || m_can_overwrite_status' fails upon attempt to connect with max_session_mem_used = 8192
errors when a connection is killed in the
* TABLE_SHARE::init_from_sql_statement_string()
* THD::init()
also, safety-wise, don't check max_mem_used on free() and when some error
was already issued.
The sole purpose of handlerton::release_temporary_latches and its wrapper
function was to release the InnoDB adaptive hash index latch
(btr_search_latch).
When the btr_search_latch was split into an array of latches
in MySQL 5.7.8 as part of the Oracle Bug#20985298 fix, the "caching"
of the latch across storage engine API calls was removed. As part of that,
the function trx_search_latch_release_if_reserved() was changed to an
assertion and the function trx_reserve_search_latch_if_not_reserved()
was removed, and handlerton::release_temporary_latches() practically
became a no-op.
Note: MDEV-12121 replaced the function
trx_search_latch_release_if_reserved()
with the more appropriately named macro trx_assert_no_search_latch().
Do not silence uncertain cases, or fix any bugs.
The only functional change should be that ha_federated::extra()
is not calling DBUG_PRINT to report an unhandled case for
HA_EXTRA_PREPARE_FOR_DROP.
Also, include fixes by Vladislav Vaintroub to the
aws_key_management plugin. The AWS C++ SDK specifically depends on
OPENSSL_LIBRARIES, not generic SSL_LIBRARIES (such as YaSSL).
/home/travis/build/MariaDB/server/sql/sql_class.cc:1941:15: warning: 'this' pointer cannot be null in well-defined C++ code; pointer may be assumed to always convert to true [-Wundefined-bool-conversion]
if (this && WSREP(this) && wsrep_thd_is_BF(this, FALSE))
^~~~ ~~
because mysql->net.thd was reset to NULL in mysql_real_connect()
and thd_increment_bytes_received() didn't do anything.
Fix:
* set mysql->net.thd to current_thd instread.
* remove the test for non-null THD from a very often used
function thd_increment_bytes_received().
