Major replication test framework cleanup. This does the following:
- Ensure that all tests clean up the replication state when they
finish, by making check-testcase check the output of SHOW SLAVE STATUS.
This implies:
- Slave must not be running after test finished. This is good
because it removes the risk for sporadic errors in subsequent
tests when a test forgets to sync correctly.
- Slave SQL and IO errors must be cleared when test ends. This is
good because we will notice if a test gets an unexpected error in
the slave threads near the end.
- We no longer have to clean up before a test starts.
- Ensure that all tests that wait for an error in one of the slave
threads waits for a specific error. It is no longer possible to
source wait_for_slave_[sql|io]_to_stop.inc when there is an error
in one of the slave threads. This is good because:
- If a test expects an error but there is a bug that causes
another error to happen, or if it stops the slave thread without
an error, then we will notice.
- When developing tests, wait_for_*_to_[start|stop].inc will fail
immediately if there is an error in the relevant slave thread.
Before this patch, we had to wait for the timeout.
- Remove duplicated and repeated code for setting up unusual replication
topologies. Now, there is a single file that is capable of setting
up arbitrary topologies (include/rpl_init.inc, but
include/master-slave.inc is still available for the most common
topology). Tests can now end with include/rpl_end.inc, which will clean
up correctly no matter what topology is used. The topology can be
changed with include/rpl_change_topology.inc.
- Improved debug information when tests fail. This includes:
- debug info is printed on all servers configured by include/rpl_init.inc
- User can set $rpl_debug=1, which makes auxiliary replication files
print relevant debug info.
- Improved documentation for all auxiliary replication files. Now they
describe purpose, usage, parameters, and side effects.
- Many small code cleanups:
- Made have_innodb.inc output a sensible error message.
- Moved contents of rpl000017-slave.sh into rpl000017.test
- Added mysqltest variables that expose the current state of
disable_warnings/enable_warnings and friends.
- Too many to list here: see per-file comments for details.
Post-push fixes:
- fixed platform dependent result files
- appeasing valgrind warnings:
Fault injection was also uncovering a previously existing
potential mem leaks. For BUG#46166 testing purposes, fixed
by forcing handling the leak when injecting faults.
in opt_range.h
In this bug, there are two alternative access plans:
* Index merge range access
* Const ref access
best_access_path() decided that the ref access was preferrable,
but make_join_select() still decided to point
SQL_SELECT::quick to the index merge because the table had
type==JT_CONST which was not handled.
At the same time the table's ref.key still referred to the
index the ref access would use indicating that ref access
should be used. In this state, different parts of the
optimizer code have different perceptions of which access path
is in use (ref or range).
test_if_skip_sort_order() was called to check if the ref access
needed ordering, but test_if_skip_sort_order() got confused and
requested the index merge to return records in sorted order.
Index merge cannot do this, and fired an ASSERT.
The fix is to take join_tab->type==JT_CONST into concideration
when make_join_select() decides whether or not to use the
range access method.
temptable views
The TABLE::key_read field indicates if the optimizer has found that row
retrieval only should access the index tree. The triggered assert
inside close_thread_table() checks that this field has been reset when
the table is about to be closed.
During normal execution, these fields are reset right before tables are
closed at the end of mysql_execute_command(). But in the case of errors,
tables are closed earlier. The patch for Bug#52044 refactored the open
tables code so that close_thread_tables() is called immediately if
opening of tables fails. At this point in the execution, it could
happend that all TABLE::key_read fields had not been properly reset,
therefore triggering the assert.
The problematic statement in this case was EXPLAIN where the query
accessed two derived tables and where the first derived table was
processed successfully while the second derived table was not.
Since it was an EXPLAIN, TABLE::key_read fields were not reset after
successful derived table processing since the state needs to be
accessible afterwards. When processing of the second derived table
failed, it's corresponding SELECT_LEX_UNIT was cleaned, which caused
it's TABLE::key_read fields to be reset. Since processing failed,
the error path of open_and_lock_tables() was entered and
close_thread_tables() was called. The assert was then triggered due
to the TABLE::key_read fields set during processing of the first
derived table.
This patch fixes the problem by adding a new derived table processor,
mysql_derived_cleanup() that is called after mysql_derived_filling().
It causes cleanup of all SELECT_LEX_UNITs to be called, resetting
all relevant TABLE::key_read fields.
Test case added to derived.test.
Problem: when inserting supplementary characters to an UCS2 column,
character was silently shrinked to 16-bit value.
Fix: produce a warning on attempt to insert a supplementary character,
and convert to question mark.
@ mysql-test/r/ctype_many.result
@ mysql-test/t/ctype_many.test
Adding tests
@ strings/ctype-ucs2.c
Check if wc is greater than the highest value supported (0xFFFF),
return MY_CS_ILUNI if true.
Bug#57913 large negative number to string conversion functions crash
String object which is used as result container of the item
has uninitialized 'str_charset' field. This object
might be used later to preform some internal operations
and str_charset field is involved in these operations.
It leads to crash.
The fix is to intialize str_charset in my_decimal2string() func.
--Bug#52157 various crashes and assertions with multi-table update, stored function
--Bug#54475 improper error handling causes cascading crashing failures in innodb/ndb
--Bug#57703 create view cause Assertion failed: 0, file .\item_subselect.cc, line 846
--Bug#57352 valgrind warnings when creating view
--Recently discovered problem when a nested materialized derived table is used
before being populated and it leads to incorrect result
We have several modes when we should disable subquery evaluation.
The reasons for disabling are different. It could be
uselessness of the evaluation as in case of 'CREATE VIEW'
or 'PREPARE stmt', or we should disable subquery evaluation
if tables are not locked yet as it happens in bug#54475, or
too early evaluation of subqueries can lead to wrong result
as it happened in Bug#19077.
Main problem is that if subquery items are treated as const
they are evaluated in ::fix_fields(), ::fix_length_and_dec()
of the parental items as a lot of these methods have
Item::val_...() calls inside.
We have to make subqueries non-const to prevent unnecessary
subquery evaluation. At the moment we have different methods
for this. Here is a list of these modes:
1. PREPARE stmt;
We use UNCACHEABLE_PREPARE flag.
It is set during parsing in sql_parse.cc, mysql_new_select() for
each SELECT_LEX object and cleared at the end of PREPARE in
sql_prepare.cc, init_stmt_after_parse(). If this flag is set
subquery becomes non-const and evaluation does not happen.
2. CREATE|ALTER VIEW, SHOW CREATE VIEW, I_S tables which
process FRM files
We use LEX::view_prepare_mode field. We set it before
view preparation and check this flag in
::fix_fields(), ::fix_length_and_dec().
Some bugs are fixed using this approach,
some are not(Bug#57352, Bug#57703). The problem here is
that we have a lot of ::fix_fields(), ::fix_length_and_dec()
where we use Item::val_...() calls for const items.
3. Derived tables with subquery = wrong result(Bug19077)
The reason of this bug is too early subquery evaluation.
It was fixed by adding Item::with_subselect field
The check of this field in appropriate places prevents
const item evaluation if the item have subquery.
The fix for Bug19077 fixes only the problem with
convert_constant_item() function and does not cover
other places(::fix_fields(), ::fix_length_and_dec() again)
where subqueries could be evaluated.
Example:
CREATE TABLE t1 (i INT, j BIGINT);
INSERT INTO t1 VALUES (1, 2), (2, 2), (3, 2);
SELECT * FROM (SELECT MIN(i) FROM t1
WHERE j = SUBSTRING('12', (SELECT * FROM (SELECT MIN(j) FROM t1) t2))) t3;
DROP TABLE t1;
4. Derived tables with subquery where subquery
is evaluated before table locking(Bug#54475, Bug#52157)
Suggested solution is following:
-Introduce new field LEX::context_analysis_only with the following
possible flags:
#define CONTEXT_ANALYSIS_ONLY_PREPARE 1
#define CONTEXT_ANALYSIS_ONLY_VIEW 2
#define CONTEXT_ANALYSIS_ONLY_DERIVED 4
-Set/clean these flags when we perform
context analysis operation
-Item_subselect::const_item() returns
result depending on LEX::context_analysis_only.
If context_analysis_only is set then we return
FALSE that means that subquery is non-const.
As all subquery types are wrapped by Item_subselect
it allow as to make subquery non-const when
it's necessary.
Auto increment value wraps when performing a bulk insert with
auto_increment_increment and auto_increment_offset greater than
one.
The fix:
If overflow happened then return MAX_ULONGLONG value as an
indication of overflow and check this before storing the
value into the field in update_auto_increment().
Explain fails at fix_fields stage and some items are left unfixed,
particulary Item_group_concat. Item_group_concat::orig_args field
is uninitialized in this case and Item_group_concat::print call
leads to crash.
The fix:
move the initialization of Item_group_concat::orig_args
into constructor.
when semijoin=on
When setting the aggregate function as having no rows to report
the function no_rows_in_result() was calling Item_sum::reset().
However this function in addition to cleaning up the aggregate
value by calling aggregator_clear() was also adding the current
value to the aggregate value by calling aggregator_add().
Fixed by making no_rows_in_result() to call aggregator_clear()
directly.
Renamed Item_sum::reset to Item_sum::reset_and_add() to
and added a comment to avoid misinterpretation of what the
function does.
