-Added test and extra code to ensure we don't leave keyread on for a handler table.
-Create on disk temporary files always with long data pointers if SQL_SMALL_RESULT is not used. This ensures that we can handle temporary files bigger than 4G.
mysql-test/include/default_mysqld.cnf:
Run test suite with smaller aria keybuffer size
mysql-test/suite/maria/maria3.result:
Run test suite with smaller aria keybuffer size
mysql-test/suite/sys_vars/r/aria_pagecache_buffer_size_basic.result:
Run test suite with smaller aria keybuffer size
sql/handler.cc:
Disable key read (extra safety if something went wrong)
sql/multi_range_read.cc:
Ensure we have don't leave keyread on for secondary_file
sql/opt_range.cc:
Simplify code with mark_columns_used_by_index_no_reset()
Ensure that read_keys_and_merge() disableds keyread if it enables it
sql/opt_subselect.cc:
Remove not anymore used argument for create_internal_tmp_table()
sql/sql_derived.cc:
Remove not anymore used argument for create_internal_tmp_table()
sql/sql_select.cc:
Use 'enable_keyread()' instead of calling HA_EXTRA_RESET. (Makes debugging easier)
Create on disk temporary files always with long data pointers if SQL_SMALL_RESULT is not used. This ensures that we can handle temporary files bigger than 4G.
Remove not anymore used argument for create_internal_tmp_table()
More DBUG
sql/sql_select.h:
Remove not anymore used argument for create_internal_tmp_table()
Change default for innodb_use_fallocate to FALSE, due to bugs in older Linux kernels (posix_fallocate() does not always guarantee that file size is like one specified)
This fixes that by default LOAD DATA INFILE will not generate the error:
"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage..."
mysql-test/suite/sys_vars/r/max_binlog_cache_size_basic.result:
Updated test case
mysql-test/suite/sys_vars/r/max_binlog_stmt_cache_size_basic.result:
Updated test case
sql/sys_vars.cc:
Increase default value of max_binlog_cache_size and max_binlog_stmt_cache_size to ulonglong_max.
buf_page_get_gen(): Do not attempt to decompress a compressed-only
page when mode == BUF_PEEK_IF_IN_POOL. This mode is only being used by
btr_search_drop_page_hash_when_freed(). There cannot be any adaptive
hash index pointing to a page that does not exist in uncompressed
format in the buffer pool.
innodb_buffer_pool_evict_update(): New function for debug builds, to handle
SET GLOBAL innodb_buffer_pool_evicted='uncompressed'
by evicting all uncompressed page frames of compressed tablespaces
from the buffer pool.
rb#1873 approved by Jimmy Yang
When a binlog is replayed into a server, e.g.:
$ mysqlbinlog binlog.000001 | mysql
it sets a pseudo slave mode on the client connection in order to server
be able to read binlog events, there is, a format description event is
needed to correctly read following events.
Also this pseudo slave mode applies to the current connection
replication rules that are needed to correctly apply binlog events.
If a binlog dump is sourced on a connection, this pseudo slave mode will
remains after it, what will apply unexpected rules from customer
perspective to following commands.
Added a new SET statement to binlog dump that will unset pseudo slave
mode at the end of dump file.
- no need to use --skip-ndb in collections files anymore, since long but
more clear logic after recent mtr.pl fixes. ndb tests are never run in MySQL Server
unless explicitly requested
- remove sys_vars.ndb_log_update_as_write_basic.test and sys_vars.ndb_log_updated_only_basic.result since MySQL Server does not have those
options.
- Only sys_vars.have_ndbcluster_basic left since MySQL Server has that variable hardcoded.
btr_lift_page_up() writes wrong page number (different by -1) for upper than father page.
But in almost all of the cases, the father page should be root page, no upper
pages. It is very rare path.
In addition the leaf page should not be lifted unless the father page is root.
Because the branch pages should not become the leaf pages.
rb://1336 approved by Marko Makela.
NUMBERS
If a system variable was declared as deprecated without mention of an
alternative, the message would look funny, e.g. for @@delayed_insert_limit:
Warning 1287 '@@delayed_insert_limit' is deprecated and
will be removed in MySQL .
The message was meant to display the version number, but it's not
possible to give one when declaring a system variable.
The fix does two things:
1) The definition of the message
ER_WARN_DEPRECATED_SYNTAX_NO_REPLACEMENT is changed so that it does
not display a version number. I.e. in English the message now reads:
Warning 1287 The syntax '@@delayed_insert_limit' is deprecated and
will be removed in a future version.
2) The message ER_WARN_DEPRECATED_SYNTAX_WITH_VER is discontinued in
favor of ER_WARN_DEPRECATED_SYNTAX for system variables. This change
was already done in versions 5.6 and above as part of wl#5265. This
part is simply back-ported from the worklog.
two tests still fail:
main.innodb_icp and main.range_vs_index_merge_innodb
call records_in_range() with both range ends being open
(which triggers an assert)
Problem
========
Replication breaks in the cases if the event length exceeds
the size of master Dump thread's max_allowed_packet.
The reason why this failure is occuring is because the event length is
more than the total size of the max_allowed_packet, on addition of the
max_event_header length exceeds the max_allowed_packet of the DUMP thread.
This causes the Dump thread to break replication and throw an error.
That can happen e.g with row-based replication in Update_rows event.
Fix
====
The problem is fixed in 2 steps:
1.) The Dump thread limit to read event is increased to the upper limit
i.e. Dump thread reads whatever gets logged in the binary log.
2.) On the slave side we increase the the max_allowed_packet for the
slave's threads (IO/SQL) by increasing it to 1GB.
This is done using the new server option (slave_max_allowed_packet)
included, is used to regulate the max_allowed_packet of the
slave thread (IO/SQL) by the DBA, and facilitates the sending of
large packets from the master to the slave.
This causes the large packets to be received by the slave and apply
it successfully.
sql/log_event.cc:
The max_allowed_packet is not evaluated to the new option
slave_max_allowed_packet after the fix.
sql/log_event.h:
Added the new option in the log_event.h file.
sql/mysqld.cc:
Added a new option to the server.
sql/slave.cc:
Increasing the session max_allowed_packet to a large value,
i.e. not taking global(max_allowed) into consideration, for the slave's threads.
sql/sql_repl.cc:
The dump thread's max_allowed_packet is set to the upper limit
which makes it independent and it now reads whatever gets
logged in the binary log.
Problem
========
SQL statements close to the size of max_allowed_packet produce binary
log events larger than max_allowed_packet.
The reason why this failure is occuring is because the event length is
more than the total size of the max_allowed_packet + max_event_header
length. Now since the event length exceeds this size master Dump
thread is unable to send the packet on to the slave.
That can happen e.g with row-based replication in Update_rows event.
Fix
====
The problem was fixed by increasing the max_allowed_packet for the
slave's threads (IO/SQL) by increasing it to 1GB.
This is done using the new server option included which is used to
regulate the max_allowed_packet of the slave thread (IO/SQL).
This causes the large packets to be received by the slave and apply
it successfully.
sql/log_event.h:
Added the new option in the log_event.h file.
sql/mysqld.cc:
Added a new option to the server.
sql/slave.cc:
Increasing the session max_allowed_packet to a large value ,
i.e. not taking global(max_allowed) into consideration, for the slave's threads.
The patch enables back constant subquery execution during
query optimization after it was disabled during the development
of MWL#89 (cost-based choice of IN-TO-EXISTS vs MATERIALIZATION).
The main idea is that constant subqueries are allowed to be executed
during optimization if their execution is not expensive.
The approach is as follows:
- Constant subqueries are recursively optimized in the beginning of
JOIN::optimize of the outer query. This is done by the new method
JOIN::optimize_constant_subqueries(). This is done so that the cost
of executing these queries can be estimated.
- Optimization of the outer query proceeds normally. During this phase
the optimizer may request execution of non-expensive constant subqueries.
Each place where the optimizer may potentially execute an expensive
expression is guarded with the predicate Item::is_expensive().
- The implementation of Item_subselect::is_expensive has been extended
to use the number of examined rows (estimated by the optimizer) as a
way to determine whether the subquery is expensive or not.
- The new system variable "expensive_subquery_limit" controls how many
examined rows are considered to be not expensive. The default is 100.
In addition, multiple changes were needed to make this solution work
in the light of the changes made by MWL#89. These changes were needed
to fix various crashes and wrong results, and legacy bugs discovered
during development.
Fixed failing tests in sys_vars as we have now stricter checking of setting of variables.
mysql-test/suite/sys_vars/r/innodb_adaptive_flushing_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_adaptive_hash_index_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_large_prefix_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_random_read_ahead_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_stats_on_metadata_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_strict_mode_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_support_xa_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_table_locks_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/rpl_semi_sync_master_enabled_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/rpl_semi_sync_slave_enabled_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_adaptive_flushing_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_adaptive_hash_index_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_large_prefix_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_random_read_ahead_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_stats_on_metadata_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_strict_mode_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_support_xa_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_table_locks_basic.test:
One can now only assign 0 or 1 to boolean variables
mysys/my_getsystime.c:
Merge + fixed bug that __NR_clock_gettime didn't work in 5.5
Make the slave options --replicate-* dynamic variables so that these
options can be changed dynamically while the server is running,
which enables users to modify replication filtering rules without
having to stop and restart the server.
This is accomplished by just requiring that the slave threads are
stopped when these options are set dynamically. Since filtering
rules are only used by the SQL slave thread, setting them while the
thread is not running avoids the need for locking.
MEMORY LEAK.
Background:
- There are caches for stored functions and stored procedures (SP-cache);
- There is no similar cache for events;
- Triggers are cached together with TABLE objects;
- Those SP-caches are per-session (i.e. specific to each session);
- A stored routine is represented by a sp_head-instance internally;
- SP-cache basically contains sp_head-objects of stored routines, which
have been executed in a session;
- sp_head-object is added into the SP-cache before the corresponding
stored routine is executed;
- SP-cache is flushed in the end of the session.
The problem was that SP-cache might grow without any limit. Although this
was not a pure memory leak (the SP-cache is flushed when session is closed),
this is still a problem, because the user might take much memory by
executing many stored routines.
The patch fixes this problem in the least-intrusive way. A soft limit
(similar to the size of table definition cache) is introduced. To represent
such limit the new runtime configuration parameter 'stored_program_cache'
is introduced. The value of this parameter is stored in the new global
variable stored_program_cache_size that used to control the size of SP-cache
to overflow.
The parameter 'stored_program_cache' limits number of cached routines for
each thread. It has the following min/default/max values given from support:
min = 256, default = 256, max = 512 * 1024.
Also it should be noted that this parameter limits the size of
each cache (for stored procedures and for stored functions) separately.
The SP-cache size is checked after top-level statement is parsed.
If SP-cache size exceeds the limit specified by parameter
'stored_program_cache' then SP-cache is flushed and memory allocated for
cache objects is freed. Such approach allows to flush cache safely
when there are dependencies among stored routines.
sql/mysqld.cc:
Added global variable stored_program_cache_size to store value of
configuration parameter 'stored-program-cache'.
sql/mysqld.h:
Added declaration of global variable stored_program_cache_size.
sql/sp_cache.cc:
Extended interface for sp_cache by adding helper routine
sp_cache_enforce_limit to control size of stored routines cache for
overflow. Also added method enforce_limit into class sp_cache that
implements control of cache size for overflow.
sql/sp_cache.h:
Extended interface for sp_cache by adding standalone routine
sp_cache_enforce_limit to control size of stored routines cache
for overflow.
sql/sql_parse.cc:
Added flush of sp_cache after processing of next sql-statement
received from a client.
sql/sql_prepare.cc:
Added flush of sp_cache after preparation/execution of next prepared
sql-statement received from a client.
sql/sys_vars.cc:
Added support for configuration parameter stored-program-cache.
