Binary log of master can get a partially logged event if the server
runs out of disk space and, while waiting for some space to be freed,
is shut down (or crashes). If the server is not stopped, it will just
wait endlessly for space to be freed, thus no partial event anomaly
occurs. The restarted master server has had a dubious policy to send
the incomplete event to slave which it apparently can't handle.
Although an error was printed out the fact of sending with unclear
error message is a source of confusion.
Actually the problem of presence an incomplete event in the binary log
was already fixed by WL 5493 (which was merged to our current trunk
branch, major version 5.6). The fix makes the server truncate the
binary log on server restart and recovery.
However 5.5 master can't do that. So the current issue is a problem of
sending incomplete events to the slave by 5.5 master.
It is fixed in this patch by changing the policy so that only complete
events are pushed by the dump thread to the IO thread. In addition,
the error text that master sends to the slave when an incomplete event
is found, now states that incomplete event may have been caused by an
out-of-disk space situation and provides coordinates of
the first and the last event bytes read.
Problem: The following statements can cause the slave to go out of sync
if logged in statement format:
INSERT IGNORE...SELECT
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE
REPLACE ... SELECT
UPDATE IGNORE :
CREATE ... IGNORE SELECT
CREATE ... REPLACE SELECT
Background: Since the order of the rows returned by the SELECT
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master.
Fix:
Issue a warning when statements like the above are exectued and
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
Six new warning messages has been added for each unsafe statement.
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.
******
BUG#11758262 - 50439: MARK INSERT...SEL...ON DUP KEY UPD,REPLACE...SEL,CREATE...[IGN|REPL] SEL
Problem: The following statements can cause the slave to go out of sync
if logged in statement format:
INSERT IGNORE...SELECT
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE
REPLACE ... SELECT
UPDATE IGNORE :
CREATE ... IGNORE SELECT
CREATE ... REPLACE SELECT
Background: Since the order of the rows returned by the SELECT
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master.
Fix:
Issue a warning when statements like the above are exectued and
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
Six new warning messages has been added for each unsafe statement.
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.
SYSTEM VARIABLE NAME SQL_MAX_JOIN_SI
BACKGROUND:
ER_TOO_BIG_SELECT refers to SQL_MAX_JOIN_SIZE, which is the
old name for MAX_JOIN_SIZE.
FIX:
Support for old name SQL_MAX_JOIN_SIZE is removed in MySQL 5.6
and is renamed as MAX_JOIN_SIZE.So the errmsg.txt
and mysql.cc files have been updated and the corresponding result
files have also been updated.
This fix was accidentally pushed to mysql-5.1 after the 5.1.59 clone-off in
bzr revision id marko.makela@oracle.com-20110829081642-z0w992a0mrc62s6w
with the fix of Bug#12704861 Corruption after a crash during BLOB update
but not merged to mysql-5.5 and upwards.
In the Barracuda formats, the clustered index record no longer
contains a prefix of off-page columns. Because of this, the undo log
must contain these prefixes, so that purge and multi-versioning will
continue to work. However, this also means that an undo log record can
become too big to fit in an undo log page. (It is a limitation of the
undo log that undo records cannot span across multiple pages.)
In case the checks for undo log size fail when CREATE TABLE or CREATE
INDEX is executed, we need a fallback that blocks a modification
operation when the undo log record would exceed the maximum size.
trx_undo_free_last_page_func(): Renamed from trx_undo_free_page_in_rollback().
Define the trx_t parameter only in debug builds.
trx_undo_free_last_page(): Wrapper for trx_undo_free_last_page_func().
Pass the trx_t parameter only in debug builds.
trx_undo_truncate_end_func(): Renamed from trx_undo_truncate_end().
Define the trx_t parameter only in debug builds. Rewrite a for(;;) loop
as a while loop for clarity.
trx_undo_truncate_end(): Wrapper for from trx_undo_truncate_end_func().
Pass the trx_t parameter only in debug builds.
trx_undo_erase_page_end(): Return TRUE if the page was non-empty
to begin with. Refuse to erase empty pages.
trx_undo_report_row_operation(): If the page for which the undo log
was too big was empty, free the undo page and return DB_TOO_BIG_RECORD.
rb:749 approved by Inaam Rana
Also addressed issues in bug #11745133, where we could mark a table
corrupted instead of crashing the server when found a corrupted buffer/page
if the table created with innodb_file_per_table on.
With this change, the index prefix column length lifted from 767 bytes
to 3072 bytes if "innodb_large_prefix" is set to "true".
rb://603 approved by Marko
MAP 'REPAIR TABLE' TO RECREATE +ANALYZE FOR ENGINES NOT
SUPPORTING NATIVE REPAIR
Executing 'mysqlcheck --check-upgrade --auto-repair ...' will first issue
'CHECK TABLE FOR UPGRADE' for all tables in the database in order to check if the
tables are compatible with the current version of MySQL. Any tables that are
found incompatible are then upgraded using 'REPAIR TABLE'.
The problem was that some engines (e.g. InnoDB) do not support 'REPAIR TABLE'.
This caused any such tables to be left incompatible. As a result such tables were
not properly fixed by the mysql_upgrade tool.
This patch fixes the problem by first changing 'CHECK TABLE FOR UPGRADE' to return
a different error message if the engine does not support REPAIR. Instead of
"Table upgrade required. Please do "REPAIR TABLE ..." it will report
"Table rebuild required. Please do "ALTER TABLE ... FORCE ..."
Second, the patch changes mysqlcheck to do 'ALTER TABLE ... FORCE' instead of
'REPAIR TABLE' in these cases.
This patch also fixes 'ALTER TABLE ... FORCE' to actually rebuild the table.
This change should be reflected in the documentation. Before this patch,
'ALTER TABLE ... FORCE' was unused (See Bug#11746162)
Test case added to mysqlcheck.test
UPDATES THE TABLE ENTRIES (formerly 55385)
BUG#11764529: MULTI UPDATE+INNODB REPORTS ER_KEY_NOT_FOUND
IF A TABLE IS UPDATED TWICE (formerly 57373)
If multiple-table update updates a row through two aliases and
the first update physically moves the row, the second update will
fail to locate the row. This results in different errors
depending on storage engine:
* MyISAM: Got error 134 from storage engine
* InnoDB: Can't find record in 'tbl'
None of these errors accurately describe the problem.
Furthermore, since MyISAM is non-transactional, the update
executed first will be performed while the second will not.
In addition, for two equal multiple-table update statements,
one could succeed and the other fail based on whether or not
the record actually moved or not. This was inconsistent.
Two update operations may physically move a row:
1) Update of a column in a clustered primary key
2) Update of a column used to calculate which partition the
row belongs to
BUG#11764529 is about case 1) above, BUG#11762751 was about case 2).
The fix for these bugs is to return with an error if multiple-table
update is about to:
a) Update a table through multiple aliases, and
b) Perform an update that may physically more the row
in at least one of these aliases
This avoids
* partial updates as described for MyISAM above,
* provides the same error message that describes the actual problem
for all SEs
* inconsistent behavior where a statement fails or succeeds based on
e.g. the partitioning algorithm of the table.
Write an additional warning message to the server log,
explaining why a sort operation is aborted.
The output in mysqld.err will look something like:
110127 15:07:54 [ERROR] mysqld: Sort aborted: Out of memory (Needed 24 bytes)
110127 15:07:54 [ERROR] mysqld: Out of sort memory, consider increasing server sort buffer size
110127 15:07:54 [ERROR] mysqld: Sort aborted: Out of sort memory, consider increasing server sort buffer size
110127 15:07:54 [ERROR] mysqld: Sort aborted: Incorrect number of arguments for FUNCTION test.f1; expected 0, got 1
If --log-warn=2 is enabled, we output information about host/user/query as well.
- Removed files specific to compiling on OS/2
- Removed files specific to SCO Unix packaging
- Removed "libmysqld/copyright", text is included in documentation
- Removed LaTeX headers for NDB Doxygen documentation
- Removed obsolete NDB files
- Removed "mkisofs" binaries
- Removed the "cvs2cl.pl" script
- Changed a few GPL texts to use "program" instead of "library"
Problem: MySQL cp1251 did not support 'U+20AC EURO SIGN'
which was assigned a few years ago to 0x88.
Fix: adding mapping: 0x88 <-> U+20AC
@ mysql-test/include/ctype_8bit.inc
New shared file to test 8bit character sets.
@ mysql-test/r/ctype_cp1251.result
@ mysql-test/t/ctype_cp1251.test
Adding tests
@ sql/share/charsets/cp1251.xml
Adding mapping
@ strings/ctype-extra.c
Regenerating ctype-extra.c using strings/conf_to_src
according to new cp1251.xml
The autotools-based build system has been superseded and
is being removed in order to ease the maintenance burden on
developers tweaking and maintaining the build system.
In order to support tools that need to extract the server
version, a new file that (only) contains the server version,
called VERSION, is introduced. The file contents are human
and machine-readable. The format is:
MYSQL_VERSION_MAJOR=5
MYSQL_VERSION_MINOR=5
MYSQL_VERSION_PATCH=8
MYSQL_VERSION_EXTRA=-rc
The CMake based version extraction in cmake/mysql_version.cmake
is changed to extract the version from this file. The configure
to CMake wrapper is retained for backwards compatibility and to
support the BUILD/ scripts. Also, a new a makefile target
show-dist-name that prints the server version is introduced.
After the WL#2687, the binlog_cache_size and max_binlog_cache_size affect both the
stmt-cache and the trx-cache. This means that the resource used is twice the amount
expected/defined by the user.
The binlog_cache_use is incremented when the stmt-cache or the trx-cache is used
and binlog_cache_disk_use is incremented when the disk space from the stmt-cache or the
trx-cache is used. This behavior does not allow to distinguish which cache may be harming
performance due to the extra disk accesses and needs to have its in-memory cache
increased.
To fix the problem, we introduced two new options and status variables related to the
stmt-cache:
Options:
. binlog_stmt_cache_size
. max_binlog_stmt_cache_size
Status Variables:
. binlog_stmt_cache_use
. binlog_stmt_cache_disk_use
So there are
. binlog_cache_size that defines the size of the transactional cache for
updates to transactional engines for the binary log.
. binlog_stmt_cache_size that defines the size of the statement cache for
updates to non-transactional engines for the binary log.
. max_binlog_cache_size that sets the total size of the transactional
cache.
. max_binlog_stmt_cache_size that sets the total size of the statement
cache.
. binlog_cache_use that identifies the number of transactions that used the
temporary transactional binary log cache.
. binlog_cache_disk_use that identifies the number of transactions that used
the temporary transactional binary log cache but that exceeded the value of
binlog_cache_size.
. binlog_stmt_cache_use that identifies the number of statements that used the
temporary non-transactional binary log cache.
. binlog_stmt_cache_disk_use that identifies the number of statements that used
the temporary non-transactional binary log cache but that exceeded the value of
binlog_stmt_cache_size.
The error message for ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE was
hard coded. Additionally, the same error was used in three
separate error symptoms: 1. when heartbeat period exceeds the
value of slave_net_timeout, 2. when it is smaller than 1
milisecond and 3. when it was not in range, ie, either negative
or greater than the maximum allowed.
We fix this by splitting into three distinct errors and by
removing the message from the source code and moving it to the
errmsg-utf8.txt file.
Bug#54678: InnoDB, TRUNCATE, ALTER, I_S SELECT, crash or deadlock
- Incompatible change: truncate no longer resorts to a row by
row delete if the storage engine does not support the truncate
method. Consequently, the count of affected rows does not, in
any case, reflect the actual number of rows.
- Incompatible change: it is no longer possible to truncate a
table that participates as a parent in a foreign key constraint,
unless it is a self-referencing constraint (both parent and child
are in the same table). To work around this incompatible change
and still be able to truncate such tables, disable foreign checks
with SET foreign_key_checks=0 before truncate. Alternatively, if
foreign key checks are necessary, please use a DELETE statement
without a WHERE condition.
Problem description:
The problem was that for storage engines that do not support
truncate table via a external drop and recreate, such as InnoDB
which implements truncate via a internal drop and recreate, the
delete_all_rows method could be invoked with a shared metadata
lock, causing problems if the engine needed exclusive access
to some internal metadata. This problem originated with the
fact that there is no truncate specific handler method, which
ended up leading to a abuse of the delete_all_rows method that
is primarily used for delete operations without a condition.
Solution:
The solution is to introduce a truncate handler method that is
invoked when the engine does not support truncation via a table
drop and recreate. This method is invoked under a exclusive
metadata lock, so that there is only a single instance of the
table when the method is invoked.
Also, the method is not invoked and a error is thrown if
the table is a parent in a non-self-referencing foreign key
relationship. This was necessary to avoid inconsistency as
some integrity checks are bypassed. This is inline with the
fact that truncate is primarily a DDL operation that was
designed to quickly remove all data from a table.
It was hard to understand what the error really meant.
The error checking in partitioning is done in several different
parts during the execution of a query which can make it
hard to return useful errors.
Added a new error for bad VALUES part in the per PARTITION clause.
Using the more verbose error that a column is not allowed in
the partitioning function instead of just that the function is
not allowed.
errors
In the fix of BUG#39934 in 5.1-rep+3, errors are generated when
binlog_format=row and a statement modifies a table restricted to
statement-logging (ER_BINLOG_ROW_MODE_AND_STMT_ENGINE); or if
binlog_format=statement and a statement modifies a table restricted to
row-logging (ER_BINLOG_STMT_MODE_AND_ROW_ENGINE).
However, some DDL statements that lock tables (e.g. ALTER TABLE,
CREATE INDEX and CREATE TRIGGER) were causing spurious errors,
although no row might be inserted into the binary log.
To fix the problem, we tagged statements that may generate
rows into the binary log and thence the warning messages are
only printed out when the appropriate conditions hold and rows
might be changed.
The thd->variables.option_bits & OPTION_BIN_LOG is currently abused:
it's both a system variable and an implementation switch. The current
approach to this option bit breaks the session variable encapsulation.
Besides it is allowed to change @@session.sql_bin_log within a
transaction what may lead to not correctly logging a transaction.
To fix the problems, we created a thd->variables variable to represent
the "sql_log_bin" and prohibited its update inside a transaction or
sub-statement.
(make relies GNU extentions). The patch was partially
backport from 6.0.
Original comment:
bug#30708: make relies GNU extensions. Now that we no longer use
BitKeeper we can safely remove the SCCS handling with no loss of
functionality.
Clarified error messages related to unsafe statements:
- avoid the internal technical term "row injection"
- use 'binary log' instead of 'binlog'
- avoid the word 'unsafeness'
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
Allow stored procedure variables in LIMIT clause.
Only allow variables of INTEGER types.
Handle negative values by means of an implicit cast to UNSIGNED
(similarly to prepared statement placeholders).
Add tests.
Make sure replication works by not doing NAME_CONST substitution
for variables in LIMIT clause.
Add replication tests.
BUG#46364 introduced the flag binlog_direct_non_transactional_updates which
would make N-changes to be written to the binary log upon committing the
statement when "ON". On the other hand, when "OFF" the option was supposed
to mimic the behavior in 5.1. However, the implementation was not mimicking
the behavior correctly and the following bugs popped up:
Case #1: N-changes executed within a transaction would go into
the S-cache. When later in the same transaction a
T-change occurs, N-changes following it were written
to the T-cache instead of the S-cache. In some cases,
this raises problems. For example, a
Table_map_log_event being written initially into the
S-cache, together with the initial N-changes, would be
absent from the T-cache. This would log N-changes
orphaned from a Table_map_log_event (thence discarded
at the slave). (MIXED and ROW)
Case #2: When rolling back a transaction, the N-changes that
might be in the T-cache were disregarded and
truncated along with the T-changes. (MIXED and ROW)
Case #3: When a MIXED statement (TN) is ahead of any other
T-changes in the transaction and it fails, it is kept
in the T-cache until the transaction ends. This is
not the case in 5.1 or Betony (5.5.2). In these, the
failed TN statement would be written to the binlog at
the same instant it had failed and not deferred until
transaction end. (SBR)
To fix these problems, we have decided to do what follows:
For Case #1 and #2, we circumvent them:
1. by not letting binlog_direct_non_transactional_updates
affect MIXED and RBR. These modes will keep the behavior
provided by WL#2687. Although this will make Celosia to
behave differently from 5.1, an execution will be always
safe under such modes in the sense that slaves will never
go out sync. In 5.1, using either MIXED or ROW while
mixing N-statements and T-statements was not safe.
For Case #3, we don't actually fix it. We:
1. keep it and make all MIXED statements whether they end
up failing or not or whether they are up front in the
transaction or after some transactional change to always
be stored in the T-cache. This means that it is written
to the binary log on transaction commit/rollback only.
2. We make the warning message even more specific about the
MIXED statement and SBR.
