Major replication test framework cleanup. This does the following:
- Ensure that all tests clean up the replication state when they
finish, by making check-testcase check the output of SHOW SLAVE STATUS.
This implies:
- Slave must not be running after test finished. This is good
because it removes the risk for sporadic errors in subsequent
tests when a test forgets to sync correctly.
- Slave SQL and IO errors must be cleared when test ends. This is
good because we will notice if a test gets an unexpected error in
the slave threads near the end.
- We no longer have to clean up before a test starts.
- Ensure that all tests that wait for an error in one of the slave
threads waits for a specific error. It is no longer possible to
source wait_for_slave_[sql|io]_to_stop.inc when there is an error
in one of the slave threads. This is good because:
- If a test expects an error but there is a bug that causes
another error to happen, or if it stops the slave thread without
an error, then we will notice.
- When developing tests, wait_for_*_to_[start|stop].inc will fail
immediately if there is an error in the relevant slave thread.
Before this patch, we had to wait for the timeout.
- Remove duplicated and repeated code for setting up unusual replication
topologies. Now, there is a single file that is capable of setting
up arbitrary topologies (include/rpl_init.inc, but
include/master-slave.inc is still available for the most common
topology). Tests can now end with include/rpl_end.inc, which will clean
up correctly no matter what topology is used. The topology can be
changed with include/rpl_change_topology.inc.
- Improved debug information when tests fail. This includes:
- debug info is printed on all servers configured by include/rpl_init.inc
- User can set $rpl_debug=1, which makes auxiliary replication files
print relevant debug info.
- Improved documentation for all auxiliary replication files. Now they
describe purpose, usage, parameters, and side effects.
- Many small code cleanups:
- Made have_innodb.inc output a sensible error message.
- Moved contents of rpl000017-slave.sh into rpl000017.test
- Added mysqltest variables that expose the current state of
disable_warnings/enable_warnings and friends.
- Too many to list here: see per-file comments for details.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
To-number conversion warnings work differenly with CHAR
and VARCHAR sp variables.
The original revision-IDs are:
staale.smedseng@sun.com-20081124095339-2qdvzkp0rn1ljs30staale.smedseng@sun.com-20081125104611-rtxic5d12e83ag2o
The patch provides ER_TRUNCATED_WRONG_VALUE warning messages
for conversion of VARCHAR to numberic values, in line with
messages provided for CHAR conversions. Conversions are
checked for success, and the message is emitted in case
failure.
The tests are amended to accept the added warning messages,
and explicit conversion of ON/OFF values is added for
statements checking system variables. In test
rpl.rpl_switch_stm_row_mixed checking for warnings is
temporarily disabled for one statement, as this generates
warning messages for strings that vary between executions.
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
This bug has been fixed in two slightly different ways in
6.0-rpl and {5.1,6.0}-bugteam. To avoid future merge
problems, I'm now copying the 6.0-rpl fix to 5.1-bugteam.
The previous fix for the bug was incomplete. The test failed
because t2 did not exist on the slave (since the slave was
lagging) when the
wait_condition was executed. Fixed by inserting
sync_slave_with_master just after t2 was created.
Problem: rpl_switch_stm_row_mixed did not wait until row events generated by
INSERT DELAYED were written to the master binlog before it synchronized slave
with master. This caused sporadic errors where these rows were missing on
slave.
Fix: wait until all rows appear on the slave.
This is a backport, applying the same to 5.1-bugteam as was previously
applied to 6.0-rpl
The bug allow multiple executing transactions working with non-transactional
to interfere with each others by interleaving the events of different trans-
actions.
Bug is fixed by writing non-transactional events to the transaction cache and
flushing the cache to the binary log at statement commit. To mimic the behavior
of normal statement-based replication, we flush the transaction cache in row-
based mode when there is no committed statements in the transaction cache,
which means we are committing the first one. This means that it will be written
to the binary log as a "mini-transaction" with just the rows for the statement.
Note that the changes here does not take effect when building the server with
HAVE_TRANSACTIONS set to false, but it is not clear if this was possible before
this patch either.
For row-based logging, we also have that when AUTOCOMMIT=1, the code now always
generates a BEGIN/COMMIT pair for single statements, or BEGIN/ROLLBACK pair in the
case of non-transactional changes in a statement that was rolled back. Note that
for the case where changes to a non-transactional table causes a rollback due
to error, the statement will now be logged with a BEGIN/ROLLBACK pair, even
though some changes has been committed to the non-transactional table.
Marking statements containing USER() or CURRENT_USER() as unsafe, causing
them to switch to using row-based logging in MIXED mode and generate a
warning in STATEMENT mode.
