It is not necessary to support INSERT DELAYED for a single value insert,
while we do not support that for multi-values insert when binlog is
enabled in SBR.
The lock_type is upgrade to TL_WRITE from TL_WRITE_DELAYED for
INSERT DELAYED for single value insert as multi-values insert
did when binlog is enabled. Then it's safe. And binlog it as
INSERT without DELAYED.
When using BINLOG statement to execute rows log events, session variables
foreign_key_checks and unique_checks are changed temporarily. As each rows
log event has their own special session environment and its own
foreign_key_checks and unique_checks can be different from current session
which executing the BINLOG statement. But these variables are not restored
correctly after BINLOG statement. This problem will cause that the following
statements fail or generate unexpected data.
In this patch, code is added to backup and restore these two variables.
So BINLOG statement will not affect current session's variables again.
The lock_type is upgrade to TL_WRITE from TL_WRITE_DELAYED for
INSERT DELAYED when inserting multi values in one statement.
It's safe. But it causes an unsafe warning in SBR.
Make INSERT DELAYED safe by logging it as INSERT without DELAYED.
temp table
This patch introduces two key changes in the replication's behavior.
Firstly, it reverts part of BUG#51894 which puts any update to temporary tables
into the trx-cache. Now, updates to temporary tables are handled according to
the type of their engines as a regular table.
Secondly, an unsafe mixed statement, (i.e. a statement that access transactional
table as well non-transactional or temporary table, and writes to any of them),
are written into the trx-cache in order to minimize errors in the execution when
the statement logging format is in use.
Such changes has a direct impact on which statements are classified as unsafe
statements and thus part of BUG#53259 is reverted.
BUG#54872 MBR: replication failure caused by using tmp table inside transaction
Changed criteria to classify a statement as unsafe in order to reduce the
number of spurious warnings. So a statement is classified as unsafe when
there is on-going transaction at any point of the execution if:
1. The mixed statement is about to update a transactional table and
a non-transactional table.
2. The mixed statement is about to update a temporary transactional
table and a non-transactional table.
3. The mixed statement is about to update a transactional table and
read from a non-transactional table.
4. The mixed statement is about to update a temporary transactional
table and read from a non-transactional table.
5. The mixed statement is about to update a non-transactional table
and read from a transactional table when the isolation level is
lower than repeatable read.
After updating a transactional table if:
6. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
7. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
8. The mixed statement is about to update a non-transactionala table
and read from a temporary non-transactional table.
9. The mixed statement is about to update a temporary non-transactional
table and update a non-transactional table.
10. The mixed statement is about to update a temporary non-transactional
table and read from a non-transactional table.
11. A statement is about to update a non-transactional table and the
option variables.binlog_direct_non_trans_update is OFF.
The reason for this is that locks acquired may not protected a concurrent
transaction of interfering in the current execution and by consequence in
the result. So the patch reduced the number of spurious unsafe warnings.
Besides we fixed a regression caused by BUG#51894, which makes temporary
tables to go into the trx-cache if there is an on-going transaction. In
MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have
updates to temporary non-transactional tables that must be written to the
binary log while rolling back the transaction.
So we fix this problem by writing the content of the trx-cache to the
binary log while rolling back a transaction if a non-transactional
temporary table was updated and the binary logging format is MIXED.
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
The BINLOG statement was sharing too much code with the slave SQL thread, introduced with
the patch for Bug#32407. This caused statements to be logged with the wrong server_id, the
id stored inside the events of the BINLOG statement rather than the id of the running
server.
Fix by rearranging code a bit so that only relevant parts of the code are executed by
the BINLOG statement, and the server_id of the server executing the statements will
not be overrided by the server_id stored in the 'format description BINLOG statement'.
Problem: binlog_stm_binlog runs INSERT DELAYED queries, and
then prints the contents of the binlog. Before checking the
contents of the binlog, the test waits until the rows have
appeared in the table. However, this is not enough, since
INSERT DELAYED does not write rows to the binlog at the same
time as it writes them to the table. So there is a race.
Fix: Add a FLUSH TABLES before SHOW BINLOG EVENTS. That
waits until the insert_delayed thread is done.
The bug allow multiple executing transactions working with non-transactional
to interfere with each others by interleaving the events of different trans-
actions.
Bug is fixed by writing non-transactional events to the transaction cache and
flushing the cache to the binary log at statement commit. To mimic the behavior
of normal statement-based replication, we flush the transaction cache in row-
based mode when there is no committed statements in the transaction cache,
which means we are committing the first one. This means that it will be written
to the binary log as a "mini-transaction" with just the rows for the statement.
Note that the changes here does not take effect when building the server with
HAVE_TRANSACTIONS set to false, but it is not clear if this was possible before
this patch either.
For row-based logging, we also have that when AUTOCOMMIT=1, the code now always
generates a BEGIN/COMMIT pair for single statements, or BEGIN/ROLLBACK pair in the
case of non-transactional changes in a statement that was rolled back. Note that
for the case where changes to a non-transactional table causes a rollback due
to error, the statement will now be logged with a BEGIN/ROLLBACK pair, even
though some changes has been committed to the non-transactional table.
minor fixes to appease pushbuild.
---
Merge sin.intern.azundris.com:/home/tnurnberg/22540/50-22540
into sin.intern.azundris.com:/home/tnurnberg/22540/51-22540
