Problem was the parsing of test suite files for various tags and options.
This was done inefficiently, and include files were re-parsed for every
place they were included. This caused a delay of 20 seconds or so before
the first test started to run.
By parsing more efficiently and re-using first parse for subsequent
inclusion of the same file, time spent parsing is reduced to less than
1 second, and start appears instantaneous.
(With this patch, full ./mtr runs in 3 minutes on my laptop (release
build.)
mysql-test/suite/innodb_plugin/t/innodb_bug52663.test:
Test is fairly slow, so try to avoid getting stuck with it at the end
while other workers are idle.
mysql-test/suite/innodb/r/innodb_bug60049.result:
Updated results
mysql-test/suite/innodb/t/innodb_bug60049.test:
Force global.innodb_fast_shutdown to 0 as test require it
mysql-test/suite/innodb_plugin/t/innodb_bug60049.test:
Force global.innodb_fast_shutdown to 0 as test require it
storage/pbxt/src/pthread_xt.cc:
Disable call to setpriority()
- Fixed some issues with partitions and connection_string, which also fixed lp:716890 "Pre- and post-recovery crash in Aria"
- Fixed wrong assert in Aria
Now need to merge with latest xtradb before pushing
sql/ha_partition.cc:
Ensure that m_ordered_rec_buffer is not freed before close.
sql/mysqld.cc:
Changed to use opt_stack_trace instead of opt_pstack.
Removed references to pstack
sql/partition_element.h:
Ensure that connect_string is initialized
storage/maria/ma_key_recover.c:
Fixed wrong assert
rw_lock_create_func(): Initialize lock->writer_thread, so that Valgrind
will not complain even when Valgrind instrumentation is not enabled.
Flag lock->writer_thread uninitialized, so that Valgrind can complain
when it is used uninitialized.
rw_lock_set_writer_id_and_recursion_flag(): Revert the bogus Valgrind
instrumentation that was pushed in the first attempt to fix this bug.
primary_key_no == 0".
Attempt to create InnoDB table with non-nullable column of
geometry type having an unique key with length 12 on it and
with some other candidate key led to server crash due to
assertion failure in both non-debug and debug builds.
The problem was that such a non-candidate key could have
been sorted as the first key in table/.FRM, before any legit
candidate keys. This resulted in assertion failure in InnoDB
engine which assumes that primary key should either be the
first key in table/.FRM or should not exist at all.
The reason behind such an incorrect sorting was an wrong
value of Create_field::key_length member for geometry field
(which was set to its pack_length == 12) which confused code
in mysql_prepare_create_table(), so it would skip marking
such key as a key with partial segments.
This patch fixes the problem by ensuring that this member
gets the same value of Create_field::key_length member as
for other blob fields (from which geometry field class is
inherited), and as result unique keys on geometry fields
are correctly marked as having partial segments.
mysql-test/include/gis_keys.inc:
Added test case for bug #58650 "Failing assertion:
primary_key_no == -1 || primary_key_no == 0".
mysql-test/r/gis.result:
Added test case for bug #58650 "Failing assertion:
primary_key_no == -1 || primary_key_no == 0".
mysql-test/suite/innodb/r/innodb_gis.result:
Added test case for bug #58650 "Failing assertion:
primary_key_no == -1 || primary_key_no == 0".
mysql-test/suite/innodb_plugin/r/innodb_gis.result:
Added test case for bug #58650 "Failing assertion:
primary_key_no == -1 || primary_key_no == 0".
sql/field.cc:
Changed Create_field::create_length_to_internal_length() to
correctly set Create_field::key_length member for geometry
fields. Similar to the blob types key_length for such fields
should be the same as length and not field's packed length
(which is always 12 for geometry).
As result of this change code handling table creation now
always correctly identifies btree/unique keys on geometry
fields as partial keys, so such keys can't be erroneously
treated as candidate keys and sorted in keys array in .FRM
before legit candidate keys.
This fixes bug #58650 "Failing assertion: primary_key_no ==
-1 || primary_key_no == 0" in which incorrect candidate key
sorting led to assertion failure in InnoDB code.
"rows examined" estimates". This change implements "innodb_stats_method"
with options of "nulls_equal", "nulls_unequal" and "null_ignored".
rb://553 approved by Marko
row_upd_changes_ord_field_binary(): Do not return TRUE if the update
vector changes a column that is covered by a prefix index, but does
not change the column prefix. Add the row_ext_t parameter for
determining whether the prefixes of externally stored columns match.
dfield_datas_are_binary_equal(): Add the parameter len, for comparing
column prefixes when len > 0.
innodb.test: Add a test case where the patch of Bug #55284 failed
without this fix.
rb:537 approved by Jimmy Yang
--Bug#52157 various crashes and assertions with multi-table update, stored function
--Bug#54475 improper error handling causes cascading crashing failures in innodb/ndb
--Bug#57703 create view cause Assertion failed: 0, file .\item_subselect.cc, line 846
--Bug#57352 valgrind warnings when creating view
--Recently discovered problem when a nested materialized derived table is used
before being populated and it leads to incorrect result
We have several modes when we should disable subquery evaluation.
The reasons for disabling are different. It could be
uselessness of the evaluation as in case of 'CREATE VIEW'
or 'PREPARE stmt', or we should disable subquery evaluation
if tables are not locked yet as it happens in bug#54475, or
too early evaluation of subqueries can lead to wrong result
as it happened in Bug#19077.
Main problem is that if subquery items are treated as const
they are evaluated in ::fix_fields(), ::fix_length_and_dec()
of the parental items as a lot of these methods have
Item::val_...() calls inside.
We have to make subqueries non-const to prevent unnecessary
subquery evaluation. At the moment we have different methods
for this. Here is a list of these modes:
1. PREPARE stmt;
We use UNCACHEABLE_PREPARE flag.
It is set during parsing in sql_parse.cc, mysql_new_select() for
each SELECT_LEX object and cleared at the end of PREPARE in
sql_prepare.cc, init_stmt_after_parse(). If this flag is set
subquery becomes non-const and evaluation does not happen.
2. CREATE|ALTER VIEW, SHOW CREATE VIEW, I_S tables which
process FRM files
We use LEX::view_prepare_mode field. We set it before
view preparation and check this flag in
::fix_fields(), ::fix_length_and_dec().
Some bugs are fixed using this approach,
some are not(Bug#57352, Bug#57703). The problem here is
that we have a lot of ::fix_fields(), ::fix_length_and_dec()
where we use Item::val_...() calls for const items.
3. Derived tables with subquery = wrong result(Bug19077)
The reason of this bug is too early subquery evaluation.
It was fixed by adding Item::with_subselect field
The check of this field in appropriate places prevents
const item evaluation if the item have subquery.
The fix for Bug19077 fixes only the problem with
convert_constant_item() function and does not cover
other places(::fix_fields(), ::fix_length_and_dec() again)
where subqueries could be evaluated.
Example:
CREATE TABLE t1 (i INT, j BIGINT);
INSERT INTO t1 VALUES (1, 2), (2, 2), (3, 2);
SELECT * FROM (SELECT MIN(i) FROM t1
WHERE j = SUBSTRING('12', (SELECT * FROM (SELECT MIN(j) FROM t1) t2))) t3;
DROP TABLE t1;
4. Derived tables with subquery where subquery
is evaluated before table locking(Bug#54475, Bug#52157)
Suggested solution is following:
-Introduce new field LEX::context_analysis_only with the following
possible flags:
#define CONTEXT_ANALYSIS_ONLY_PREPARE 1
#define CONTEXT_ANALYSIS_ONLY_VIEW 2
#define CONTEXT_ANALYSIS_ONLY_DERIVED 4
-Set/clean these flags when we perform
context analysis operation
-Item_subselect::const_item() returns
result depending on LEX::context_analysis_only.
If context_analysis_only is set then we return
FALSE that means that subquery is non-const.
As all subquery types are wrapped by Item_subselect
it allow as to make subquery non-const when
it's necessary.
mysql-test/r/derived.result:
test case
mysql-test/r/multi_update.result:
test case
mysql-test/r/view.result:
test case
mysql-test/suite/innodb/r/innodb_multi_update.result:
test case
mysql-test/suite/innodb/t/innodb_multi_update.test:
test case
mysql-test/suite/innodb_plugin/r/innodb_multi_update.result:
test case
mysql-test/suite/innodb_plugin/t/innodb_multi_update.test:
test case
mysql-test/t/derived.test:
test case
mysql-test/t/multi_update.test:
test case
mysql-test/t/view.test:
test case
sql/item.cc:
--removed unnecessary code
sql/item_cmpfunc.cc:
--removed unnecessary checks
--THD::is_context_analysis_only() is replaced with LEX::is_ps_or_view_context_analysis()
sql/item_func.cc:
--refactored context analysis checks
sql/item_row.cc:
--removed unnecessary checks
sql/item_subselect.cc:
--removed unnecessary code
--added DBUG_ASSERT into Item_subselect::exec()
which asserts that subquery execution can not happen
if LEX::context_analysis_only is set, i.e. at context
analysis stage.
--Item_subselect::const_item()
Return FALSE if LEX::context_analysis_only is set.
It prevents subquery evaluation in ::fix_fields &
::fix_length_and_dec at context analysis stage.
sql/item_subselect.h:
--removed unnecessary code
sql/mysql_priv.h:
--Added new set of flags.
sql/sql_class.h:
--removed unnecessary code
sql/sql_derived.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_lex.cc:
--init LEX::context_analysis_only field
sql/sql_lex.h:
--New LEX::context_analysis_only field
sql/sql_parse.cc:
--removed unnecessary code
sql/sql_prepare.cc:
--removed unnecessary code
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_select.cc:
--refactored context analysis checks
sql/sql_show.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_view.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
Auto increment value wraps when performing a bulk insert with
auto_increment_increment and auto_increment_offset greater than
one.
The fix:
If overflow happened then return MAX_ULONGLONG value as an
indication of overflow and check this before storing the
value into the field in update_auto_increment().
mysql-test/r/auto_increment.result:
test case
mysql-test/suite/innodb/r/innodb-autoinc.result:
test case fix
mysql-test/suite/innodb/t/innodb-autoinc.test:
test case fix
mysql-test/suite/innodb_plugin/r/innodb-autoinc.result:
test case fix
mysql-test/suite/innodb_plugin/t/innodb-autoinc.test:
test case fix
mysql-test/t/auto_increment.test:
test case
sql/handler.cc:
If overflow happened then return MAX_ULONGLONG value as an
indication of overflow and check this before storing the
value into the field in update_auto_increment().
Problem is that these tests run with --innodb-lock-wait-timeout=2 in .opt
(and this is necessary as built-in innodb does not allow to change this
dynamically). This cases another part of the test to occasionally time
out an UPDATE, which subsequently caused the test case to timeout due to
waiting for a condition (successful UPDATE) that never occurs.
Fixed by re-trying the update in case of timeout.
Tested by inserting a sleep() in the connection that the UPDATE is waiting
for, and checking that the retry loops a couple of times until the other
connection is done and COMMITs.
InnoDB AUTOINC code expects the locks to be released in strict reverse order
at the end of the statement. However, nested stored proedures and partition
tables break this rule. We now allow the locks to be deleted from the
trx->autoinc_locks vector in any order but optimise for the common (old) case.
rb://441 Approved by Marko Makela
OPTIMIZE TABLE recreates the whole table. That is why the counter gets reset.
Making the next autoinc column persistent is a separate issue from resetting
the value after an OPTIMIZE TABLE. We already have a check for ALTER TABLE
and CREATE INDEX to preserve the value on table recreate. We should be able to
add an additional check for OPTIMIZE TABLE to preserve the next value.
rb://519 Approved by Jimmy Yang.
In case of low memory sort buffer QUICK_INDEX_MERGE_SELECT creates
temporary file where is stores row ids which meet QUICK_SELECT ranges
except of clustered pk range, clustered range is processed separately.
In init_read_record we check if temporary file is used and choose
appropriate record access method. It does not take into account that
temporary file contains partial result in case of QUICK_INDEX_MERGE_SELECT
with clustered pk range.
The fix is always to use rr_quick if QUICK_INDEX_MERGE_SELECT
with clustered pk range is used.
mysql-test/suite/innodb/r/innodb_mysql.result:
test case
mysql-test/suite/innodb/t/innodb_mysql.test:
test case
mysql-test/suite/innodb_plugin/r/innodb_mysql.result:
test case
mysql-test/suite/innodb_plugin/t/innodb_mysql.test:
test case
sql/opt_range.h:
added new method
sql/records.cc:
The fix is always to use rr_quick if QUICK_INDEX_MERGE_SELECT
with clustered pk range is used.
Fixed timing test failures.
Fixed a failure in the Aria engines page cache and log handler (found with maria.maria-big test)
- This could cause a core dump when deleting big blobs.
- Added test to end_pagecache() to verify that page cache was correctly used.
- inc_counter_for_resize_op and dec_counter_for_resize_op are called same number of times.
- All page cache blocks was properly deallocated (empty)
mysql-test/suite/innodb/t/innodb_bug38231.test:
Fixed timing issue (code comment says it all)
mysql-test/suite/innodb_plugin/t/innodb_bug38231.test:
Fixed timing issue (code comment says it all)
sql/debug_sync.cc:
Fixed compiler warning
storage/maria/ma_loghandler.c:
Fixed bug found by maria.maria-big test:
- Fixed race condition between update thread logging a very big blog and checkpoint thread.
storage/maria/ma_pagecache.c:
Added assert to ensure mutex was properly locked.
Added test to end_pagecache() to verify that page cache was correctly used.
- inc_counter_for_resize_op and dec_counter_for_resize_op are called same number of times.
- All page cache blocks was properly deallocated (empty)
In pagecache_delete_internal(), properly reset counters and pins if functions aborts.
Added missing inc_counter_for_resize_op() to pagecache_wait_lock().
Added missing dec_counter_for_resize_op() to pagecache_delete()
mysql-test/suite/innodb_plugin/t/innodb_bug38231.test:
Sometimes you get a timeout here; Disable the not fatal error message.
storage/xtradb/sync/sync0rw.c:
Disable compiler warning
configure.in:
Added comment
mysql-test/suite/innodb_plugin/t/innodb_bug56680.test:
Disable test when run with valgrind as we get errors from buf_buddy_relocate() on work for this test.
(Should probably be investigated as this may be an issue in xtradb, but probably harmless)
Work is an amd-64 running openSUSE 1.11 and valgrind 3.4.1
mysys/charset.c:
Remove static function if not used (to remove compiler warning)
storage/xtradb/srv/srv0srv.c:
Added casts to get rid of compiler warnings
mysql-test/include/have_not_innodb_plugin.inc:
Also detect if xtradb is installed
mysql-test/suite/innodb/t/innodb_bug56143.test:
Disabled test case that doesn't work for innodb_plugin/xtradb.
mysql-test/suite/innodb_plugin/r/innodb_bug56632.result:
Updated result (key_block_size is lower case in MariaDB, as all other options)
mysql-test/suite/pbxt/r/partition_hash.result:
Updated results (after partition row count optimization changes)
mysql-test/suite/pbxt/r/partition_pruning.result:
Updated results (after partition row count optimization changes)
mysql-test/suite/pbxt/r/partition_range.result:
Updated results (after partition row count optimization changes)
mysql-test/suite/pbxt/r/subselect.result:
Updated result after ROW() changes.
Open issues:
- A better fix for #57688; Igor is working on this
- Test failure in index_merge_innodb.test ; Igor promised to look at this
- Some Innodb tests fails (need to merge with latest xtradb) ; Kristian promised to look at this.
- Failing tests: innodb_plugin.innodb_bug56143 innodb_plugin.innodb_bug56632 innodb_plugin.innodb_bug56680 innodb_plugin.innodb_bug57255
- Werror is disabled; Should be enabled after merge with xtradb.
removed and replaced by the comprehensive innodb-create-options.test.
It uses the rules listed in the comments at the top of that test.
This patch introduces these differences from previous behavior;
1) KEY_BLOCK_SIZE=0 is allowed by Innodb in both strict and non-strict mode
with no errors or warnings. It was previously used by the server to set
KEY_BLOCK_SIZE to undefined. (Bug#56628)
2) An explicit valid non-DEFAULT ROW_FORMAT always takes priority over a
valid KEY_BLOCK_SIZE. (bug#56632)
3) Automatic use of COMPRESSED row format is only done if the ROW_FORMAT
is DEFAULT or unspecified.
4) ROW_FORMAT=FIXED is prevented in strict mode.
This patch also includes various formatting changes for consistency with
InnoDB coding standards.
Related Bugs
Bug#54679: ALTER TABLE causes compressed row_format to revert to compact
Bug#56628: ALTER TABLE .. KEY_BLOCK_SIZE=0 produces untrue warning or unnecessary error
Bug#56632: ALTER TABLE implicitly changes ROW_FORMAT to COMPRESSED
Replace the array of mutexes that used to protect
dict_index_t::stat_n_diff_key_vals[] with an array of rw locks that protects
all the stats related members in dict_table_t and all of its indexes.
Approved by: Jimmy (rb://503)
row_search_for_mysql(): When a secondary index record might not be
visible in the current transaction's read view and we consult the
clustered index and optionally some undo log records, return the
relevant columns of the clustered index record to MySQL instead of the
secondary index record.
ibuf_insert_to_index_page_low(): New function, refactored from
ibuf_insert_to_index_page().
ibuf_insert_to_index_page(): When we are inserting a record in place
of a delete-marked record and some fields of the record differ, update
that record just like row_ins_sec_index_entry_by_modify() would do.
btr_cur_update_alloc_zip(): Make the function public.
mysql_row_templ_t: Add clust_rec_field_no.
row_sel_store_mysql_rec(), row_sel_push_cache_row_for_mysql(): Add the
flag rec_clust, for returning data at clust_rec_field_no instead of
rec_field_no. Resurrect the debug assertion that the record not be
marked for deletion. (Bug #55626)
[UNIV_DEBUG || UNIV_IBUF_DEBUG] ibuf_debug, buf_page_get_gen(),
buf_flush_page_try():
Implement innodb_change_buffering_debug=1 for evicting pages from the
buffer pool, so that change buffering will be attempted more
frequently.
This is a merge from 5.1/builtin to 5.1/plugin of:
--------------
revision-id: vasil.dimov@oracle.com-20101018104811-nwqhg9vav17kl5s1
committer: Vasil Dimov <vasil.dimov@oracle.com>
timestamp: Mon 2010-10-18 13:48:11 +0300
message:
Fix Bug#57252 disabling innobase_stats_on_metadata disables ANALYZE
In order to fix this bug we need to distinguish whether ha_innobase::info()
has been called from ::analyze() or not. Rename ::info() to ::info_low()
and add a boolean parameter that tells whether the call is from ::analyze()
or not. Create a new simple ::info() that just calls
::info_low(false => not called from analyze). From ::analyze() instead of
::info() call ::info_low(true => called from analyze).
Approved by: Jimmy (rb://487)
--------------
