The default storage engine is changed from MyISAM to
InnoDB, in all builds except for the embedded server.
In addition, the following system variables are
changed:
* innodb_file_per_table is enabled
* innodb_strict_mode is enabled
* innodb_file_format_name_update is changed
to 'Barracuda'
The test suite is changed so that tests that do not
explicitly include the have_innodb.inc are run with
--default-storage-engine=MyISAM. This is to ease the
transition, so that most regression tests are run
with the same engine as before.
Some tests are disabled for the embedded server
regression test, as the output of certain statements
will be different that for the regular server
(i.e SELECT @@default_storage_engine). This is to
ease transition.
mysql-test/mysql-test-run.pl:
The regression test suite now adds a
--default-storage-engine=MyISAM for all non-innodb
tests. This behaviour can be controlled by the
default-myisam switch in mysql-test-run
mysql-test/t/bootstrap-master.opt:
The bootstrap test can only be run without InnoDB
as it starts several mysqld instances on the same
datadir. This is possible with MyISAM, but not
with InnoDB.
storage/innobase/CMakeLists.txt:
Build InnoDB per default
storage/innobase/handler/ha_innodb.cc:
Change default values for system variables
Enable file_per_table
Enable strict_mode
Upgrade default file format to Barracuda
This patch aims at moving some rpl tests to be run on a daily
basis instead of running on a per push basis. To accomplish such
goal the following modifications are proposed:
- MTR: added --skip-test-list cli parameter
This option allows the user to specify more than one
disabled.def file, for example:
perl mtr --skip-test-list=list1.list --skip-test-list=list2.list
- Added collections/disabled-per-push.list
This file lists the test cases that should be disabled per
push.
- Changed mysql-test/collections/default.push
Added --skip-test-list=collections/disabled-per-push.list
to rpl_binlog_row, ps_row and n_mix runs.
- Changed mysql-test/collections/default.daily
Added rpl_binlog_row run (since it is partially run per push we
should run it fully on a daily basis).
MTR will ignore fully qualified test name entries in disabled.def
lists. Therefore, it would still run the test case, even if it is
listed.
This patch fix this by extending the check when marking the test
case as disabled to take into consideration not only the cases that
contain the simple test name but also those that contain fully
qualified test names.
they are ignored to a new test suite "innodb_plugin".
Remove a hack in mtr that was deployed to run the builtin InnoDB tests against
the InnoDB Plugin. Also detect if a test is an 'innodb plugin test' and if so
then transparently replace the builtin InnoDB with the InnoDB Plugin.
Some logic would group by suite always
Disable this if using --noreorder
Also fix getting array from collect_one_suite() in this case
Amended according to previous comment
applied revisions: r6185, r6186, r6189, r6194
r6185 - only code changes incorporated, changesets which change
innodb tests in the main mysql suite are discarded
r61889 - Fixes BUG#48782
Detailed revision comments:
r6185 | marko | 2009-11-17 16:44:20 +0200 (Tue, 17 Nov 2009) | 16 lines
branches/zip: Report duplicate table names
to the client connection, not to the error log. This change will allow
innodb-index.test to be re-enabled. It was previously disabled, because
mysql-test-run does not like output in the error log.
row_create_table_for_mysql(): Do not output anything to the error log
when reporting DB_DUPLICATE_KEY. Let the caller report the error.
Add a TODO comment that the dict_table_t object is apparently not freed
when an error occurs.
create_table_def(): Convert InnoDB table names to the character set
of the client connection for reporting. Use my_error(ER_WRONG_COLUMN_NAME)
for reporting reserved column names. Report my_error(ER_TABLE_EXISTS_ERROR)
when row_create_table_for_mysql() returns DB_DUPLICATE_KEY.
rb://206
r6186 | vasil | 2009-11-17 16:48:14 +0200 (Tue, 17 Nov 2009) | 4 lines
branches/zip:
Add ChangeLog entry for r6185.
r6189 | marko | 2009-11-18 11:36:18 +0200 (Wed, 18 Nov 2009) | 5 lines
branches/zip: ha_innobase::add_index(): When creating the primary key
and the table is being locked by another transaction,
do not attempt to drop the table. (Bug #48782)
Approved by Sunny Bains over IM
r6194 | vasil | 2009-11-19 09:24:45 +0200 (Thu, 19 Nov 2009) | 5 lines
branches/zip:
Increment version number from 1.0.5 to 1.0.6 since 1.0.5 was just released
by MySQL and we will soon release 1.0.6.
- disabled main.innodb_bug47777.test with InnoDB plugin
until fix for plugin is applied.
- disabled main.innodb-autoinc.test (failing)
- re-enabled main.innodb_bug39438.test
- added error message suppression to innodb_bug39438, as
requested by InnoDB/Oracle
- reverted change to main.innodb_bug34300 as plugin specific.
Knowledge of no SSL support is not used
Skip tests the same way e.g. innodb tests are
Does not refer to have_ssl_communication.inc,
will add this when merging to 6.0-codebase
1. BUG#46000 - using index called GEN_CLUST_INDEX crashes server
Detailed revision comments:
r5895 | jyang | 2009-09-15 03:39:21 +0300 (Tue, 15 Sep 2009) | 5 lines
branches/5.1: Disallow creating index with the name of
"GEN_CLUST_INDEX" which is reserved for the default system
primary index. (Bug #46000) rb://149 approved by Marko Makela.
can be interpreted as a shell metacharacter in some circumstances.
For example, it is interpreted as a command separator when invoking
a debugger.
mysql-test/lib/mtr_cases.pm:
Use ':' as the separator on non-Windows platforms.
mysql-test/mysql-test-run.pl:
Remove unnecessary use of the separator.
value from the index (PRIMARY)
With the fix for BUG#46760, we correctly flag the presence of row_type
only when it's actually changed and enables the FAST ALTER TABLE which was
disabled with the BUG#39200.
So the changes made by BUG#46760 makes MySQL data dictionaries to be out of
sync but they are handled already by InnoDB with this BUG#44030.
The test was originally written to handle this but we requested Innodb to
update the test as the data dictionaries were in sync after the fix for
BUG#39200.
Adjusting the innodb-autoinc testcase as mentioned in the comments.
mysql-test/lib/mtr_cases.pm:
Re-enable the innodb-autoinc test case for plugin as we have a common
result file.
mysql-test/r/innodb-autoinc.result:
Additional Fix for BUG#44030 - Error: (1500) Couldn't read the MAX(ID) autoinc
value from the index (PRIMARY)
Adjust the innodb-autoinc testcase as the patch for BUG#46760 enables the
FAST ALTER TABLE and makes the data dictonaries go out of sync. This is
expected in the testcase.
mysql-test/t/innodb-autoinc.test:
Additional Fix for BUG#44030 - Error: (1500) Couldn't read the MAX(ID) autoinc
value from the index (PRIMARY)
Adjust the innodb-autoinc testcase as the patch for BUG#46760 enables the
FAST ALTER TABLE and makes the data dictonaries go out of sync. This is
expected in the testcase.
1. Fixes BUG#44030 - Error: (1500) Couldn't read the MAX(ID) autoinc value
from the index (PRIMARY)
2. Disables the innodb-autoinc test for innodb plugin temporarily.
The testcase for this bug has different result file for InnoDB plugin.
Should add the testcase to Innodb suite with a different result file.
Detailed revision comments:
r5243 | sunny | 2009-06-04 03:17:14 +0300 (Thu, 04 Jun 2009) | 14 lines
branches/5.1: When the InnoDB and MySQL data dictionaries go out of sync, before
the bug fix we would assert on missing autoinc columns. With this fix we allow
MySQL to open the table but set the next autoinc value for the column to the
MAX value. This effectively disables the next value generation. INSERTs will
fail with a generic AUTOINC failure. However, the user should be able to
read/dump the table, set the column values explicitly, use ALTER TABLE to
set the next autoinc value and/or sync the two data dictionaries to resume
normal operations.
Fix Bug#44030 Error: (1500) Couldn't read the MAX(ID) autoinc value from the
index (PRIMARY)
rb://118
r5252 | sunny | 2009-06-04 10:16:24 +0300 (Thu, 04 Jun 2009) | 2 lines
branches/5.1: The version of the result file checked in was broken in r5243.
r5259 | vasil | 2009-06-05 10:29:16 +0300 (Fri, 05 Jun 2009) | 7 lines
branches/5.1:
Remove the word "Error" from the printout because the mysqltest suite
interprets it as an error and thus the innodb-autoinc test fails.
Approved by: Sunny (via IM)
r5466 | vasil | 2009-07-02 10:46:45 +0300 (Thu, 02 Jul 2009) | 6 lines
branches/5.1:
Adjust the failing innodb-autoinc test to conform to the latest behavior
of the MySQL code. The idea and the comment in innodb-autoinc.test come
from Sunny.
mysql-test/lib/mtr_cases.pm:
there is only one InnoDB in this tree, no need to run an InnoDB test twice
mysql-test/suite/innodb/include/have_innodb_plugin.inc:
plugin is now the builtin
mysql-test/suite/innodb/t/innodb-analyze.test:
plugin is now the builtin
mysql-test/suite/innodb/t/innodb-timeout.test:
plugin is now the builtin
mysql-test/suite/innodb/t/innodb-use-sys-malloc.test:
plugin is now the builtin
mysql-test/suite/innodb/t/innodb-zip.test:
plugin is now the builtin
mysql-test/suite/innodb/t/innodb_bug36169.test:
plugin is now the builtin
mysql-test/suite/innodb/t/innodb_bug36172.test:
plugin is now the builtin
mysql-test/suite/innodb/t/innodb_file_format.test:
plugin is now the builtin
mysql-test/suite/innodb/t/innodb_information_schema.test:
plugin is now the builtin
storage/innodb_plugin/plug.in:
build libinnobase.a, to have it built-in
mysql-test/lib/mtr_cases.pm:
Expand test cases list with test cases to test
InnoDB plugin.
mysql-test/mysql-test-run.pl:
Added "innodb" suite to default list of suites.
mysql-test/suite/innodb/include/have_innodb_plugin.inc:
This file determines if innodb plugin is available.
mysql-test/suite/innodb/my.cnf:
Removed temporary my.cnf, which was added for testing. Not
needed anymore - options are substituted by mtr.
mysql-test/suite/innodb/t/innodb-analyze.test:
This test can only be run with InnoDB plugin.
mysql-test/suite/innodb/t/innodb-timeout.test:
This test can only be run with InnoDB plugin.
mysql-test/suite/innodb/t/innodb-use-sys-malloc-master.opt:
Use "loose" prefix with mysqld options. This makes this
test skipped properly when no innodb is available.
mysql-test/suite/innodb/t/innodb-use-sys-malloc.test:
This test can only be run with InnoDB plugin.
mysql-test/suite/innodb/t/innodb-zip.test:
This test can only be run with InnoDB plugin.
mysql-test/suite/innodb/t/innodb_bug36169.test:
This test can only be run with InnoDB plugin.
mysql-test/suite/innodb/t/innodb_bug36172.test:
This test can only be run with InnoDB plugin.
mysql-test/suite/innodb/t/innodb_information_schema.test:
This test can only be run with InnoDB plugin.
Fix bug in mtr_cases.pm script visible only when InnoDB isn't configured.
mysql-test/lib/mtr_cases.pm:
If InnoDB isn't configured the help texts won't show the "innodb" option and mysqld_variables will not contain any "innodb" entry.
It is not possible to prevent the server from starting if a mandatory
built-in plugin fails to start. This can in some cases lead to data
corruption when the old table name space suddenly is used by a different
storage engine.
A boolean command line option in the form of --foobar is automatically
created for every existing plugin "foobar". By changing this command line
option from a boolean to a tristate { OFF, ON, FORCE } it is possible to
specify the plugin loading policy for each plugin.
The behavior is specified as follows:
OFF = Disable the plugin and start the server
ON = Enable the plugin and start the server even if an error occurrs
during plugin initialization.
FORCE = Enable the plugin but don't start the server if an error occurrs
during plugin initialization.
mysql-test/lib/mtr_cases.pm:
* Changed --<pluginname> from a boolean to a tristate.
mysys/my_getopt.c:
* Changed --<pluginname> from boolean to tristate. Optional arguments
must still work for tristates. It is praxis that disable means value 0
and enable is value 1. Since plugin name is the only tristate with
optional arguments this principle will still hold.
sql/sql_plugin.cc:
* Changed --<pluginname> option from a boolean type to a tristate.
- FORCE will now terminate the server if the plugin fails to
initialize properly.
* Refactored prototypes for test_plugin_options() and construct_options()
to get rid of the 'enable' value pointer.
* Cleaned up code related to option name constructing.
* Added documentation
sql/sql_plugin.h:
* Introduced new member to st_plugin_int structure.
