Fall back to use ALTER TABLE for engines that doesn't support REPAIR when doing repair for upgrade.
Nicer output from mysql_upgrade and mysql_check
Updated all arrays that used NAME_LEN to use SAFE_NAME_LEN to ensure that we don't break things accidently as names can now have a #mysql50# prefix.
client/mysql_upgrade.c:
If we are using verbose, also run mysqlcheck in verbose mode.
client/mysqlcheck.c:
Add more information if running in verbose mode
Print 'Needs upgrade' instead of complex error if table needs to be upgraded
Don't write connect information if verbose is not 2 or above
mysql-test/r/drop.result:
Updated test and results as we now support full table names
mysql-test/r/grant.result:
Now you get a correct error message if using #mysql with paths
mysql-test/r/show_check.result:
Update results as table names can temporarly be bigger than NAME_LEN (during upgrade)
mysql-test/r/upgrade.result:
Test upgrade for long table names.
mysql-test/suite/funcs_1/r/is_tables_is.result:
Updated old test result (had note been updated in a while)
mysql-test/t/drop.test:
Updated test and results as we now support full table names
mysql-test/t/grant.test:
Now you get a correct error message if using #mysql with paths
mysql-test/t/upgrade.test:
Test upgrade for long table names.
sql/ha_partition.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/item.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/log_event.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/mysql_priv.h:
Added SAFE_NAME_LEN
sql/rpl_filter.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sp.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sp_head.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_acl.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_base.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_connect.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_parse.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_prepare.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_select.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_show.cc:
NAME_LEN -> SAFE_NAME_LEN
Enlarge table names for SHOW TABLES to also include optional #mysql50#
sql/sql_table.cc:
Fall back to use ALTER TABLE for engines that doesn't support REPAIR when doing repair for upgrade.
sql/sql_trigger.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_udf.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_view.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/table.cc:
Fixed check_table_name() to not count #mysql50# as part of name
If #mysql50# is part of the name, don't allow path characters in name.
- Changed to still use bcmp() in certain cases becasue
- Faster for short unaligneed strings than memcmp()
- Bettern when using valgrind
- Changed to use my_sprintf() instead of sprintf() to get higher portability for old systems
- Changed code to use MariaDB version of select->skip_record()
- Removed -%::SCCS/s.% from Makefile.am:s to remove automake warnings
The issue was that we didn't always check result of ha_rnd_init() which caused a problem for handlers that returned an error in this code.
- Changed prototype of ha_rnd_init() to ensure that we get a compile warning if result is not checked.
- Added ha_rnd_init_with_error() that prints error on failure.
- Checked all usage of ha_rnd_init() and ensure we generate an error message on failures.
- Changed init_read_record() to return 1 on failure.
sql/create_options.cc:
Fixed wrong printf
sql/event_db_repository.cc:
Check result from init_read_record()
sql/events.cc:
Check result from init_read_record()
sql/filesort.cc:
Check result from ha_rnd_init()
sql/ha_partition.cc:
Check result from ha_rnd_init()
sql/ha_partition.h:
Fixed compiler warning
sql/handler.cc:
Added ha_rnd_init_with_error()
Check result from ha_rnd_init()
sql/handler.h:
Added ha_rnd_init_with_error()
Changed prototype of ha_rnd_init() to ensure that we get a compile warning if result is not checked
sql/item_subselect.cc:
Check result from ha_rnd_init()
sql/log.cc:
Check result from ha_rnd_init()
sql/log_event.cc:
Check result from ha_rnd_init()
sql/log_event_old.cc:
Check result from ha_rnd_init()
sql/mysql_priv.h:
init_read_record() now returns error code on failure
sql/opt_range.cc:
Check result from ha_rnd_init()
sql/records.cc:
init_read_record() now returns error code on failure
Check result from ha_rnd_init()
sql/sql_acl.cc:
Check result from init_read_record()
sql/sql_cursor.cc:
Print error if ha_rnd_init() fails
sql/sql_delete.cc:
Check result from init_read_record()
sql/sql_help.cc:
Check result from init_read_record()
sql/sql_plugin.cc:
Check result from init_read_record()
sql/sql_select.cc:
Check result from ha_rnd_init()
Print error if ha_rnd_init() fails.
sql/sql_servers.cc:
Check result from init_read_record()
sql/sql_table.cc:
Check result from init_read_record()
sql/sql_udf.cc:
Check result from init_read_record()
sql/sql_update.cc:
Check result from init_read_record()
storage/example/ha_example.cc:
Don't return error on rnd_init()
storage/ibmdb2i/ha_ibmdb2i.cc:
Removed not relevant comment
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
mysql-test/include/diff_tables.inc:
Expend its abilities.
Now it can diff not only in sessions of 'master' and 'slave', but
other sessions as well.
mysql-test/include/rpl_diff_tables.inc:
Diff the same table between master and slaves.
sql/log_event.cc:
session's user will be written into Query_log_event, if is_current_user_used() is TRUE.
On slave SQL thread, Only thd->variables.current_user is written into Query_log_event,
if it exists.
sql/sql_acl.cc:
On slave SQL thread, grantor should copy from thd->variables.current_user, if it exists
sql/sql_class.h:
On slave SQL thread, thd->variables.current_user is used to store the applying event's
invoker.
Although the C standard mandates that sprintf return the number
of bytes written, some very ancient systems (i.e. SunOS 4)
returned a pointer to the buffer instead. Since these systems
are not supported anymore and are hopefully long dead by now,
simply remove the portability wrapper that dealt with this
discrepancy. The autoconf check was causing trouble with GCC.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
mysql-test/include/diff_tables.inc:
Expend its abilities.
Now it can diff not only in sessions of 'master' and 'slave', but
other sessions as well.
sql/log_event.cc:
session's user will be written into Query_log_event, if is_current_user_used() is TRUE.
On slave SQL thread, Only thd->invoker is written into Query_log_event,
if it exists.
sql/sql_acl.cc:
On slave SQL thread, grantor should copy from thd->invoker, if it exists
sql/sql_class.h:
On slave SQL thread, thd->invoker is used to store the applying event's
invoker.
Apart strict-aliasing warnings, fix the remaining warnings
generated by GCC 4.4.4 -Wall and -Wextra flags.
One major source of warnings was the in-house function my_bcmp
which (unconventionally) took pointers to unsigned characters
as the byte sequences to be compared. Since my_bcmp and bcmp
are deprecated functions whose only difference with memcmp is
the return value, every use of the function is replaced with
memcmp as the special return value wasn't actually being used
by any caller.
There were also various other warnings, mostly due to type
mismatches, missing return values, missing prototypes, dead
code (unreachable) and ignored return values.
BUILD/SETUP.sh:
Remove flags that are implied by -Wall and -Wextra.
Do not warn about unused parameters in C++.
BUILD/check-cpu:
Print only the compiler version instead of verbose banner.
Although the option is gcc specific, the check was only
being used for GCC specific checks anyway.
client/mysql.cc:
bcmp is no longer defined.
client/mysqltest.cc:
Pass a string to function expecting a format string.
Replace use of bcmp with memcmp.
cmd-line-utils/readline/Makefile.am:
Always define _GNU_SOURCE when compiling GNU readline.
Required to make certain prototypes visible.
cmd-line-utils/readline/input.c:
Condition for the code to be meaningful.
configure.in:
Remove check for bcmp.
extra/comp_err.c:
Use appropriate type.
extra/replace.c:
Replace use of bcmp with memcmp.
extra/yassl/src/crypto_wrapper.cpp:
Do not ignore the return value of fgets. Retrieve the file
position if fgets succeed -- if it fails, the function will
bail out and return a error.
extra/yassl/taocrypt/include/blowfish.hpp:
Use a single array instead of accessing positions of the sbox_
through a subscript to pbox_.
extra/yassl/taocrypt/include/runtime.hpp:
One definition of such functions is enough.
extra/yassl/taocrypt/src/aes.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/taocrypt/src/algebra.cpp:
Rename arguments to avoid shadowing related warnings.
extra/yassl/taocrypt/src/blowfish.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/taocrypt/src/integer.cpp:
Do not define type within a anonymous union.
Use a variable to return a value instead of
leaving the result in a register -- compiler
does not know the logic inside the asm.
extra/yassl/taocrypt/src/misc.cpp:
Define handler for pure virtual functions.
Remove unused code.
extra/yassl/taocrypt/src/twofish.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/testsuite/test.hpp:
Function must have C language linkage.
include/m_string.h:
Remove check which relied on bcmp being defined -- they weren't
being used as bcmp is only visible when _BSD_SOURCE is defined.
include/my_bitmap.h:
Remove bogus helpers which were used only in a few files and
were causing warnings about dead code.
include/my_global.h:
Due to G++ bug, always silence false-positive uninitialized
variables warnings when compiling C++ code with G++.
Remove bogus helper.
libmysql/Makefile.shared:
Remove built-in implementation of bcmp.
mysql-test/lib/My/SafeProcess/safe_process.cc:
Cast pid to largest possible type for a process identifier.
mysys/mf_loadpath.c:
Leave space of the ending nul.
mysys/mf_pack.c:
Replace bcmp with memcmp.
mysys/my_bitmap.c:
Dead code removal.
mysys/my_gethwaddr.c:
Remove unused variable.
mysys/my_getopt.c:
Silence bogus uninitialized variable warning.
Do not cast away the constant qualifier.
mysys/safemalloc.c:
Cast to expected type.
mysys/thr_lock.c:
Silence bogus uninitialized variable warning.
sql/field.cc:
Replace bogus helper with a more appropriate logic which is
used throughout the code.
sql/item.cc:
Remove bogus logical condition which always evaluates to TRUE.
sql/item_create.cc:
Simplify code to avoid signedness related warnings.
sql/log_event.cc:
Replace use of bcmp with memcmp.
No need to use helpers for simple bit operations.
sql/log_event_old.cc:
Replace bmove_align with memcpy.
sql/mysqld.cc:
Move use declaration of variable to the ifdef block where it
is used. Remove now-unnecessary casts and arguments.
sql/set_var.cc:
Replace bogus helpers with simple and classic bit operations.
sql/slave.cc:
Cast to expected type and silence bogus warning.
sql/sql_class.h:
Don't use enum values as bit flags, the supposed type safety is
bogus as the combined bit flags are not a value in the enumeration.
sql/udf_example.c:
Only declare variable when necessary.
sql/unireg.h:
Replace use of bmove_align with memcpy.
storage/innobase/os/os0file.c:
Silence bogus warning.
storage/myisam/mi_open.c:
Remove bogus cast, DBUG_DUMP expects a pointer to unsigned
char.
storage/myisam/mi_page.c:
Remove bogus cast, DBUG_DUMP expects a pointer to unsigned
char.
strings/bcmp.c:
Remove built-in bcmp.
strings/ctype-ucs2.c:
Silence bogus warning.
tests/mysql_client_test.c:
Use a appropriate type as expected by simple_command().
Post-push fix.
There was a valgrind issue on the loop that checks whether there
are NULL fields in the UNIQUE KEY or not. In detail, for the last
iteration the server may read out of the key_part array boundaries,
making valgrind to output warnings.
We fix this by correcting the loop, ie, moving the part that reads
from the key_part to be inside the loop statement block. This way
the assignment is protected by the loop condition.
When using Unique Keys with nullable parts in RBR, the slave can
choose the wrong row to update. This happens because a table with
an unique key containing nullable parts cannot strictly guarantee
uniqueness. As stated in the manual, for all engines, a UNIQUE
index allows multiple NULL values for columns that can contain
NULL.
We fix this at the slave by extending the checks before assuming
that the row found through an unique index is is the correct
one. This means that when a record (R) is fetched from the storage
engine and a key that is not primary (K) is used, the server does
the following:
- If K is unique and has no nullable parts, it returns R;
- Otherwise, if any field in the before image that is part of K
is null do an index scan;
- If there is no NULL field in the BI part of K, then return R.
A side change: renamed the existing test case file and added a
test case covering the changes in this patch.
This patch fixes two problems described as follows:
1 - If there is an on-going transaction and a temporary table is created or
dropped, any failed statement that follows the "create" or "drop commands"
triggers a rollback and by consequence the slave will go out sync because
the binary log will have a wrong sequence of events.
To fix the problem, we changed the expression that evaluates when the
cache should be flushed after either the rollback of a statment or
transaction.
2 - When a "CREATE TEMPORARY TABLE SELECT * FROM" was executed the
OPTION_KEEP_LOG was not set into the thd->options. For that reason, if
the transaction had updated only transactional engines and was rolled
back at the end (.e.g due to a deadlock) the changes were not written
to the binary log, including the creation of the temporary table.
To fix the problem, we have set the OPTION_KEEP_LOG into the thd->options
when a "CREATE TEMPORARY TABLE SELECT * FROM" is executed.
sql/log.cc:
Reorganized the code based on the following functions:
- bool ending_trans(const THD* thd, const bool all);
- bool trans_has_updated_non_trans_table(const THD* thd);
- bool trans_has_no_stmt_committed(const THD* thd, const bool all);
- bool stmt_has_updated_non_trans_table(const THD* thd);
sql/log.h:
Added functions to organize the code in log.cc.
sql/log_event.cc:
Removed the OPTION_KEEP_LOG since it must be used only when
creating and dropping temporary tables.
sql/log_event_old.cc:
Removed the OPTION_KEEP_LOG since it must be used only when
creating and dropping temporary tables.
sql/sql_parse.cc:
When a "CREATE TEMPORARY TABLE SELECT * FROM" was executed the
OPTION_KEEP_LOG was not set into the thd->options.
To fix the problem, we have set the OPTION_KEEP_LOG into the
thd->options when a "CREATE TEMPORARY TABLE SELECT * FROM"
is executed.
When using a non-transactional table (t1) on the master
and with autocommit disabled, no COMMIT is recorded
in the binary log ending the statement. Therefore, if
the slave has t1 in a transactional engine, then it will
be as if a transaction is started but never ends. This is
actually BUG#29288 all over again.
We fix this by cherrypicking the cset for BUG#29288 which
was pushed to a later mysql version. The revision picked
was: mats@sun.com-20090923094343-bnheplq8n95opjay .
Additionally, a test case for covering the scenario depicted
in the bug report is included in this cset.
of sync
In RBR, sometimes the table->s->last_null_bit_pos can be zero. This
has impact at the slave when it compares records fetched from the
storage engine against records in the binary log event. If
last_null_bit_pos is zero the slave, while comparing in
log_event.cc:record_compare function, would set all bits in the last
null_byte to 1 (assumed all 8 were unused) . Thence it would loose the
ability to distinguish records that were similar in contents except
for the fact that some field was null in one record, but not in the
other. Ultimately this would cause wrong matches, and in the specific
case depicted in the bug report the same record would be updated
twice, resulting in a lost update.
Additionally, in the record_compare function the slave was setting the
X bit unconditionally. There are cases that the X bit does not exist
in the record header. This could also lead to wrong matches between
records.
We fix both by conditionally resetting the bits: (i) unused null_bits
are set if last_null_bit_pos > 0; (ii) X bit is set if
HA_OPTION_PACK_RECORD is in use.
mysql-test/extra/rpl_tests/rpl_record_compare.test:
Shared part of the test case for MyISAM and InnoDB.
mysql-test/suite/rpl/t/rpl_row_rec_comp_innodb.test:
InnoDB test case.
mysql-test/suite/rpl/t/rpl_row_rec_comp_myisam.test:
MyISAM test case. Added also coverage for Field_bits case.
sql/log_event.cc:
Deployed conditional setting of unused bits at record_compare.
sql/log_event_old.cc:
Same change as in log_event.cc.
When mysqlbinlog was given the --database=X flag, it always printed
'ROLLBACK TO', but the corresponding 'SAVEPOINT' statement was not
printed. The replicated filter(replicated-do/ignore-db) and binlog
filter (binlog-do/ignore-db) has the same problem. They are solved
in this patch together.
After this patch, We always check whether the query is 'SAVEPOINT'
statement or not. Because this is a literal check, 'SAVEPOINT' and
'ROLLBACK TO' statements are also binlogged in uppercase with no
any comments.
The binlog before this patch can be handled correctly except one case
that any comments are in front of the keywords. for example:
/* bla bla */ SAVEPOINT a;
/* bla bla */ ROLLBACK TO a;
for InnoDB
The class Field_bit_as_char stores the metadata for the
field incorrecly because bytes_in_rec and bit_len are set
to (field_length + 7 ) / 8 and 0 respectively, while
Field_bit has the correct values field_length / 8 and
field_length % 8.
Solved the problem by re-computing the values for the
metadata based on the field_length instead of using the
bytes_in_rec and bit_len variables.
To handle compatibility with old server, a table map
flag was added to indicate that the bit computation is
exact. If the flag is clear, the slave computes the
number of bytes required to store the bit field and
compares that instead, effectively allowing replication
*without conversion* from any field length that require
the same number of bytes to store.
mysql-test/suite/rpl/t/rpl_typeconv_innodb.test:
Adding test to check compatibility for bit field
replication when using InnoDB
sql/field.cc:
Extending compatible_field_size() with flags from
table map to allow fields to check master info.
sql/field.h:
Extending compatible_field_size() with flags from
table map to allow fields to check master info.
sql/log.cc:
Removing table map flags since they are not used
outside table map class.
sql/log_event.cc:
Removing flags parameter from table map constructor
since it is not used and does not have to be exposed.
sql/log_event.h:
Adding flag to denote that bit length for bit field type
is exact and not potentially rounded to even bytes.
sql/rpl_utility.cc:
Adding fields to table_def to store table map flags.
sql/rpl_utility.h:
Removing obsolete comment and adding flags to store
table map flags from master.
I found three issues during the analysis:
1. Memory leak caused by temp_buf not being freed;
2. Memory leak caused when handling argv;
3. Conditional jump that depended on unitialized values.
Issue #1
--------
DESCRIPTION: when mysqlbinlog is reading from a remote location
the event temp_buf references the incoming stream (in NET
object), which is not freed by mysqlbinlog explicitly. On the
other hand, when it is reading local binary log, it points to a
temporary buffer that needs to be explicitly freed. For both
cases, the temp_buf was not freed by mysqlbinlog, instead was
set to 0. This clearly disregards the free required in the
second case, thence creating a memory leak.
FIX: we make temp_buf to be conditionally freed depending on
the value of remote_opt. Found out that similar fix is already
in most recent codebases.
Issue #2
--------
DESCRIPTION: load_defaults is called by parse_args, and it
reads default options from configuration files and put them
BEFORE the arguments that are already in argc and argv. This is
done resorting to MEM_ROOT. However, parse_args calls
handle_options immediately after which changes argv. Later when
freeing the defaults, pointers to MEM_ROOT won't match, causing
the memory not to be freed:
void free_defaults(char **argv)
{
MEM_ROOT ptr
memcpy_fixed((char*) &ptr,(char *) argv - sizeof(ptr), sizeof(ptr));
free_root(&ptr,MYF(0));
}
FIX: we remove load_defaults from parse_args and call it
before. Then we save argv with defaults in defaults_argv BEFORE
calling parse_args (which inside can then call handle_options
at will). Actually, found out that this is in fact kind of a
backport for BUG#38468 into 5.1, so I merged in the test case
as well and added error check for load_defaults call.
Fix based on:
revid:zhenxing.he@sun.com-20091002081840-uv26f0flw4uvo33y
Issue #3
--------
DESCRIPTION: the structure st_print_event_info constructor
would not initialize the sql_mode member, although it did for
sql_mode_inited (set to false). This would later raise the
warning in valgrind when printing the sql_mode in the event
header, as this print out is protected by a check against
sql_mode_inited and sql_mode variables. Given that sql_mode was
not initialized valgrind would output the warning.
FIX: we add initialization of sql_mode to the
st_print_event_info constructor.
client/mysqlbinlog.cc:
- Conditionally free ev->temp_buf.
- save defaults_argv before handle_options is called.
mysql-test/t/mysqlbinlog.test:
Added test case from BUG#38468.
sql/log_event.cc:
Added initialization of sql_mode for st_print_event_info.
MySQL with gcc 4.3.2
This is the final patch in the context of this bug.
cmd-line-utils/readline/rlmbutil.h:
Changed in a previous patch, reverted by a backport.
cmd-line-utils/readline/text.c:
Static var initialization.
extra/yassl/include/yassl_error.hpp:
SetErrorString handles errors outside of the YasslError
enum.
extra/yassl/src/ssl.cpp:
SetErrorString handles errors outside of the YasslError
enum.
extra/yassl/src/yassl_error.cpp:
SetErrorString handles errors outside of the YasslError
enum.
into slow log
While processing a statement, down the mysql_parse execution
stack, the thd->enable_slow_log can be assigned to
opt_log_slow_admin_statements, depending whether one is executing
administrative statements, such as ALTER TABLE, OPTIMIZE,
ANALYZE, etc, or not. This can have an impact on slow logging for
statements that are executed after an administrative statement
execution is completed.
When executing statements directly from the user this is fine
because, the thd->enable_slow_log is reset right at the beginning
of the dispatch_command function, ie, everytime a new statement
is set is set to execute.
On the other hand, for slave SQL thread (sql_thd) the story is a
bit different. When in SBR the sql_thd applies statements by
calling mysql_parse. Right after, it calls log_slow_statement
function to log them if they take too long. Calling mysql_parse
directly is fine, but also means that dispatch_command function
is bypassed. As a consequence, thd->enable_slow_log does not get
a chance to be reset before the next statement to be executed by
the sql_thd. If the statement just executed by the sql_thd was an
administrative statement and logging of admin statements was
disabled, this means that sql_thd->enable_slow_log will be set to
0 (disabled) from that moment on. End result: sql_thd stops
logging slow statements.
We fix this by resetting the value of sql_thd->enable_slow_log to
the value of opt_log_slow_slave_statements right after
log_slow_stement is called by the sql_thd.
Rename method as to not hide a base.
Reorder attributes initialization.
Remove unused variable.
Rework code to silence a warning due to assignment used as truth value.
sql/item_strfunc.cc:
Rename method as to not hide a base.
sql/item_strfunc.h:
Rename method as to not hide a base.
sql/log_event.cc:
Reorder attributes initialization.
sql/rpl_injector.cc:
Rework code to silence a warning due to assignment used as truth value.
sql/rpl_record.cc:
Remove unused variable.
sql/sql_db.cc:
Rework code to silence a warning due to assignment used as truth value.
sql/sql_parse.cc:
Rework code to silence a warning due to assignment used as truth value.
sql/sql_table.cc:
Rework code to silence a warning due to assignment used as truth value.
When replicating from 4.1 master to 5.0 slave START SLAVE UNTIL can stop too late.
The necessary in calculating of the beginning of an event the event's length
did not correspond to the master's genuine information at the event's execution time.
That piece of info was changed at the event's relay-logging due to binlog_version<4 event
conversion by IO thread.
Fixed with storing the master genuine Query_log_event size into a new status
variable at relay-logging of the event. The stored info is extacted at the event
execution and participate further to caclulate the correct start position of the event
in the until-pos stopping routine.
The new status variable's algorithm will be only active when the event comes
from the master of version < 5.0 (binlog_version < 4).
mysql-test/r/rpl_until.result:
results changed.
mysql-test/std_data/bug47142_master-bin.000001:
a binlog from 4.1 master to replace one of the running 5.x master is added as
part of Bug #47142 regression test.
mysql-test/t/rpl_until.test:
Regression test for Bug #47142 is added.
sql/log_event.cc:
Storing and extracting the master's genuine size of the event from the status
var of the event packet header.
The binlog_version<4 query-log-event is
a. converted into the modern binlog_version==4 to store the original size of the event
into a new status var; the converted representation goes into the relay log.
b. the converted event is read out and the stored size is engaged in the start pos calculation.
The new status is active only for events that IO thread instantiates for the sake of the conversion.
sql/log_event.h:
Incrementing the max szie of MAX_SIZE_LOG_EVENT_STATUS because of the new status var;
Defining the new status variable to hold the master's genuine event size;
Augmenting the Query_log_event with a new member to hold a value to store/extact from the status
var of the event packet header.
- Marked a couple of tests with --big
- Fixed xtradb/handler/ha_innodb.cc to call explain_filename()
storage/xtradb/handler/ha_innodb.cc:
Call explain_filename() to get proper names for partitioned tables
BUG#49481: RBR: MyISAM and bit fields may cause slave to stop on delete:
cant find record
BUG#49482: RBR: Replication may break on deletes when MyISAM tables +
char field are used
When using MyISAM tables, despite the fact that the null bit is
set for some fields, their old value is still in the row. This
can cause the comparison of records to fail when the slave is
doing an index or range scan.
We fix this by avoiding memcmp for MyISAM tables when comparing
records. Additionally, when comparing field by field, we first
check if both fields are not null and if so, then we compare
them. If just one field is null we return failure immediately. If
both fields are null, we move on to the next field.
