This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
The cause of the bug is overflow of uint16 KEY_PART_INFO::length and/or
uint16 KEY_PART_INFO::store_length. The solution is to increase the size
of those variables to the 'uint' type (which is 32-bit long)
The issue happens when the secondary keys are extended with primary
key parts. Inside the function TABLE_SHARE::init_from_binary_frm_image()
adds the length bytes for the primary key key parts to the length of the
secondary key. This is not needed because when the extended keys are
used we recalculate the length for the used key parts.
Also removed TABLE_SHARE::total_key_length as it is not used in the code
Apporved-by: Monty <monty@mariadb.org>
The data member tv_usec of the struct timeval is declared as suseconds_t
on MacOS. Size of suseconds_t is 4 bytes. On the other hand, size of ulong
is 8 bytes on 64-bit MacOS, so attempt to assign a value of wider type
(usec) to a value (tv_usec) of narrower type leads to error.
- Adding optional qualifiers to data types:
CREATE TABLE t1 (a schema.DATE);
Qualifiers now work only for three pre-defined schemas:
mariadb_schema
oracle_schema
maxdb_schema
These schemas are virtual (hard-coded) for now, but may turn into real
databases on disk in the future.
- mariadb_schema.TYPE now always resolves to a true MariaDB data
type TYPE without sql_mode specific translations.
- oracle_schema.DATE translates to MariaDB DATETIME.
- maxdb_schema.TIMESTAMP translates to MariaDB DATETIME.
- Fixing SHOW CREATE TABLE to use a qualifier for a data type TYPE
if the current sql_mode translates TYPE to something else.
The above changes fix the reported problem, so this script:
SET sql_mode=ORACLE;
CREATE TABLE t2 AS SELECT mariadb_date_column FROM t1;
is now replicated as:
SET sql_mode=ORACLE;
CREATE TABLE t2 (mariadb_date_column mariadb_schema.DATE);
and the slave can unambiguously treat DATE as the true MariaDB DATE
without ORACLE specific translation to DATETIME.
Similar,
SET sql_mode=MAXDB;
CREATE TABLE t2 AS SELECT mariadb_timestamp_column FROM t1;
is now replicated as:
SET sql_mode=MAXDB;
CREATE TABLE t2 (mariadb_timestamp_column mariadb_schema.TIMESTAMP);
so the slave treats TIMESTAMP as the true MariaDB TIMESTAMP
without MAXDB specific translation to DATETIME.
With MAX_INDEXIES=64(default), key_map=Bitmap<64> is just a wrapper around
ulonglong and thus "trivial" (can be bzero-ed, or memcpy-ed, and stays
valid still)
With MAX_INDEXES=128, key_map = Bitmap<128> is not a "trivial" type
anymore. The implementation uses MY_BITMAP, and MY_BITMAP contains pointers
which make Bitmap invalid, when it is memcpy-ed/bzero-ed.
The problem in 10.4 is that there are many new key_map members, inside TABLE
or KEY, and those are often memcopied and bzeroed
The fix makes Bitmap "trivial", by inlining most of MY_BITMAP functionality.
pointers/heap allocations are not used anymore.
post-merge changes:
* handle password expiration on old tables like everything else -
make changes in memory, even if they cannot be done on disk
* merge "debug" tests with non-debug tests, they don't use dbug anyway
* only run rpl password expiration in MIXED mode, it doesn't replicate
anything, so no need to repeat it thrice
* restore update_user_table_password() prototype, it should not change
ACL_USER, this is done in acl_user_update()
* don't parse json twice in get_password_lifetime and get_password_expired
* remove LEX_USER::is_changing_password, see if there was any auth instead
* avoid overflow in expiration calculations
* don't initialize Account_options in the constructor, it's bzero-ed later
* don't create ulong sysvars - they're not portable, prefer uint or ulonglong
* misc simplifications
This patch adds support for expiring user passwords.
The following statements are extended:
CREATE USER user@localhost PASSWORD EXPIRE [option]
ALTER USER user@localhost PASSWORD EXPIRE [option]
If no option is specified, the password is expired with immediate
effect. If option is DEFAULT, global policy applies according to
the default_password_lifetime system var (if 0, password never
expires, if N, password expires every N days). If option is NEVER,
the password never expires and if option is INTERVAL N DAY, the
password expires every N days.
The feature also supports the disconnect_on_expired_password system
var and the --connect-expired-password client option.
Closes#1166
Find indexes of one table which parts participate in one constraint.
These indexes are called constraint correlated.
New methods: TABLE::find_constraint_correlated_indexes() and
virtual method check_index_dependence() were added.
For each index it's own constraint correlated index map was created
where all indexes that are constraint correlated with the current are
marked.
The results of this task are used for MDEV-16188 (Use in-memory
PK filters built from range index scans).
introduce the syntax
... IDENTIFIED { WITH | VIA }
plugin [ { USING | AS } auth ]
[ OR plugin [ { USING | AS } auth ]
[ OR ... ]]
Server will try auth plugins in the specified order until the first
success. No protocol changes, server uses the existing "switch plugin"
packet.
The auth chain is stored in json as
"auth_or":[{"plugin":"xxx","authentication_string":"yyy"},
{},
{"plugin":"foo","authentication_string":"bar"},
...],
"plugin":"aaa", "authentication_string":"bbb"
Note:
* "auth_or" implies that there might be "auth_and" someday;
* one entry in the array is an empty object, meaning to take plugin/auth
from the main json object. This preserves compatibility with
the existing mysql.global_priv table and with the mysql.user view.
This entry is preferrably a mysql_native_password plugin for a
non-empty mysql.user.password column.
SET PASSWORD is supported and changes the password for the *first*
plugin in the chain that has a notion of a "password"
This patch contains a full implementation of the optimization
that allows to use in-memory rowid / primary filters built for range
conditions over indexes. In many cases usage of such filters reduce
the number of disk seeks spent for fetching table rows.
In this implementation the choice of what possible filter to be applied
(if any) is made purely on cost-based considerations.
This implementation re-achitectured the partial implementation of
the feature pushed by Galina Shalygina in the commit
8d5a11122c.
Besides this patch contains a better implementation of the generic
handler function handler::multi_range_read_info_const() that
takes into account gaps between ranges when calculating the cost of
range index scans. It also contains some corrections of the
implementation of the handler function records_in_range() for MyISAM.
This patch supports the feature for InnoDB and MyISAM.
Don't distinguish between a "password hash" and "authentication string"
anymore. Now both are stored in mysql.user.authentication_string, both
are handled identically internally. A "password hash" is just how some
particular plugins interpret authentication string.
Set mysql.user.plugin even if there is no password. The server will use
mysql_native_password plugin in these cases, let's make it expicit.
Remove LEX_USER::pwhash.
Adding a helper class Timeval, to initialize "struct timeval" in a safe way.
As a bonus, adding a method Timeval::trunc(), so the caller now can have
one line instead of five lines (declaration, initializations of sec and usec,
truncation, passing to store_TIMEVAL()).
The code passing positions in the query to constructors of
Rewritable_query_parameter descendants (e.g. Item_splocal)
was not reliable. It used various Lex_input_stream methods:
- get_tok_start()
- get_tok_start_prev()
- get_tok_end()
- get_ptr()
to find positions of the recently scanned tokens.
The challenge was mostly to choose between get_tok_start()
and get_tok_start_prev(), taking into account to the current
grammar (depending if lookahead takes place before
or after we read the positions in every particular rule).
But this approach did not work at all in combination
with token contractions, when MYSQLlex() translates
two tokens into one token ID, for example:
WITH ROLLUP -> WITH_ROLLUP_SYM
As a result, the tokenizer is already one more token ahead.
So in query fragment:
"GROUP BY d, spvar WITH ROLLUP"
get_tok_start() points to "ROLLUP".
get_tok_start_prev() points to "WITH".
As a result, it was "WITH" who was erroneously replaced
to NAME_CONST() instead of "spvar".
This patch modifies the code to do it a different way.
Changes:
1. For keywords and identifiers, the tokenizer now
returns LEX_CTRING pointing directly to the query
fragment. So query positions are now just available using:
- $1.str - for the beginning of a token
- $1.str+$1.length - for the end of a token
2. Identifiers are not allocated on the THD memory root
in the tokenizer any more. Allocation is now done
on later stages, in methods like LEX::create_item_ident().
3. Two LEX_CSTRING based structures were added:
- Lex_ident_cli_st - used to store the "client side"
identifier representation, pointing to the
query fragment. Note, these identifiers
are encoded in @@character_set_client
and can have broken byte sequences.
- Lex_ident_sys_st - used to store the "server side"
identifier representation, pointing to the
THD allocated memory. This representation
guarantees that the identifier was checked
for being well-formed, and is encoded in utf8.
4. To distinguish between two identifier types
in the grammar, two Bison types were added:
<ident_cli> and <ident_sys>
5. All non-reserved keywords were marked as
being of the type <ident_cli>.
All reserved keywords are still of the type NONE.
6. All curly brackets in rules collecting
non-reserved keywords into non-terminal
symbols were removed, e.g.:
Was:
keyword_sp_data_type:
BIT_SYM {}
| BOOLEAN_SYM {}
Now:
keyword_sp_data_type:
BIT_SYM
| BOOLEAN_SYM
This is important NOT to have brackets here!!!!
This is needed to make sure that the underlying
Lex_ident_cli_ststructure correctly passes up to
the calling rule.
6. The code to scan identifiers and keywords
was moved from lex_one_token() into new
Lex_input_stream methods:
scan_ident_sysvar()
scan_ident_start()
scan_ident_middle()
scan_ident_delimited()
This was done to:
- get rid of enormous amount of references to &yylval->lex_str
- and remove a lot of references like lip->xxx
7. The allocating functionality which puts identifiers on the
THD memory root now resides in methods of Lex_ident_sys_st,
and in THD::to_ident_sys_alloc().
get_quoted_token() was removed.
8. Cleanup: check_simple_select() was moved as a method to LEX.
9. Cleanup: Some more functionality was moved from *.yy
to new methods were added to LEX:
make_item_colon_ident_ident()
make_item_func_call_generic()
create_item_qualified_asterisk()
Handle string length as size_t, consistently (almost always:))
Change function prototypes to accept size_t, where in the past
ulong or uint were used. change local/member variables to size_t
when appropriate.
This fix excludes rocksdb, spider,spider, sphinx and connect for now.
This was done in, among other things:
- thd->db and thd->db_length
- TABLE_LIST tablename, db, alias and schema_name
- Audit plugin database name
- lex->db
- All db and table names in Alter_table_ctx
- st_select_lex db
Other things:
- Changed a lot of functions to take const LEX_CSTRING* as argument
for db, table_name and alias. See init_one_table() as an example.
- Changed some function arguments from LEX_CSTRING to const LEX_CSTRING
- Changed some lists from LEX_STRING to LEX_CSTRING
- threads_mysql.result changed because process list_db wasn't always
correctly updated
- New append_identifier() function that takes LEX_CSTRING* as arguments
- Added new element tmp_buff to Alter_table_ctx to separate temp name
handling from temporary space
- Ensure we store the length after my_casedn_str() of table/db names
- Removed not used version of rename_table_in_stat_tables()
- Changed Natural_join_column::table_name and db_name() to never return
NULL (used for print)
- thd->get_db() now returns db as a printable string (thd->db.str or "")
When granting a role to another role, DB privileges get propagated. If
the grantee had no previous DB privileges, an extra ACL_DB entry is created to
house those "indirectly received" privileges. If, afterwards, DB
privileges are granted to the grantee directly, we must make sure to not
create a duplicate ACL_DB entry.
Benefits of this patch:
- Removed a lot of calls to strlen(), especially for field_string
- Strings generated by parser are now const strings, less chance of
accidently changing a string
- Removed a lot of calls with LEX_STRING as parameter (changed to pointer)
- More uniform code
- Item::name_length was not kept up to date. Now fixed
- Several bugs found and fixed (Access to null pointers,
access of freed memory, wrong arguments to printf like functions)
- Removed a lot of casts from (const char*) to (char*)
Changes:
- This caused some ABI changes
- lex_string_set now uses LEX_CSTRING
- Some fucntions are now taking const char* instead of char*
- Create_field::change and after changed to LEX_CSTRING
- handler::connect_string, comment and engine_name() changed to LEX_CSTRING
- Checked printf() related calls to find bugs. Found and fixed several
errors in old code.
- A lot of changes from LEX_STRING to LEX_CSTRING, especially related to
parsing and events.
- Some changes from LEX_STRING and LEX_STRING & to LEX_CSTRING*
- Some changes for char* to const char*
- Added printf argument checking for my_snprintf()
- Introduced null_clex_str, star_clex_string, temp_lex_str to simplify
code
- Added item_empty_name and item_used_name to be able to distingush between
items that was given an empty name and items that was not given a name
This is used in sql_yacc.yy to know when to give an item a name.
- select table_name."*' is not anymore same as table_name.*
- removed not used function Item::rename()
- Added comparision of item->name_length before some calls to
my_strcasecmp() to speed up comparison
- Moved Item_sp_variable::make_field() from item.h to item.cc
- Some minimal code changes to avoid copying to const char *
- Fixed wrong error message in wsrep_mysql_parse()
- Fixed wrong code in find_field_in_natural_join() where real_item() was
set when it shouldn't
- ER_ERROR_ON_RENAME was used with extra arguments.
- Removed some (wrong) ER_OUTOFMEMORY, as alloc_root will already
give the error.
TODO:
- Check possible unsafe casts in plugin/auth_examples/qa_auth_interface.c
- Change code to not modify LEX_CSTRING for database name
(as part of lower_case_table_names)
