This is a backport of the applicable part of
commit 93475aff8d and
commit 2c39f69d34
from 10.4.
Before 10.4 and Galera 4, WSREP_ON is a macro that points to
a global Boolean variable, so it is not that expensive to
evaluate, but we will add an unlikely() hint around it.
WSREP_ON_NEW: Remove. This macro was introduced in
commit c863159c32
when reverting WSREP_ON to its previous definition.
We replace some use of WSREP_ON with WSREP(thd), like it was done
in 93475aff8d. Note: the macro
WSREP() in 10.1 is equivalent to WSREP_NNULL() in 10.4.
Item_func_rand::seed_random(): Avoid invoking current_thd
when WSREP is not enabled.
Problem was in a combination of LOCK TABLES on several Aria
tables followed by an ALTER TABLE. After the ALTER TABLE there
was a force close + reopen of the alter table. The close failed
because the table was still part of a transaction.
Fixed by calling extra(HA_EXTRA_PREPARE_FOR_FORCED_CLOSE) as
part of closing the table, which ensures that the table is not
anymore part of the current transaction.
remove a special treatment of a bare DEFAULT keyword that made it
behave inconsistently and differently from DEFAULT(column).
Now all forms of the explicit assignment of a default column value
behave identically, and all count as an explicitly assigned value
(for the purpose of ON UPDATE NOW).
followup for c7c481f4d9
Three issues here:
* ON UPDATE DEFAULT NOW columns were updated after generated columns
were computed - this broke indexed virtual columns
* ON UPDATE DEFAULT NOW columns were updated after BEFORE triggers,
so triggers didn't see the correct NEW value
* in case of a multi-update generated columns were also updated
after BEFORE triggers
* remove one level of virtual functions
* remove redundant checks
* remove an if() as the value is always known at compilation time
don't pretend that "DEFAULT expr" and "ON UPDATE DEFAULT NOW"
are "basically the same thing"
The MDEV-20265 commit e746f451d5
introduces DBUG_ASSERT(right_op == r_tbl) in
st_select_lex::add_cross_joined_table(), and that assertion would
fail in several tests that exercise joins. That commit was skipped
in this merge, and a separate fix of MDEV-20265 will be necessary in 10.4.
1. Revert incorrect treatment of m_needs_reopen;
2. Close single instance of TABLE instead of all instances since
reopened only those that are marked for reopen.
1. Fix DBUG_ASSERT(!table->pos_in_locked_tables) in tc_release_table();
2. Fix access of prematurely freed MDL_ticket: don't close ticket if table was not closed;
3. Fix deadlock after erroneous ALTER.
mysql_alter_table() leaves dirty table->m_needs_reopen in case of
error exit which then incorrectly treated by mysql_lock_tables().
For MODE_SIMULTANEOUS_ASSIGNMENT it is required to return back field
offsets from record[1] to record[0]. 'continue' in warning branch did
skip of rfield->move_field_offset() call.
MDEV-17717
Assertion `!table->pos_in_locked_tables' failed in tc_release_table on
flushing RocksDB table under SERIALIZABLE
MDEV-17998
Deadlock and eventual Assertion `!table->pos_in_locked_tables' failed
in tc_release_table on KILL_TIMEOUT
MDEV-19591
Assertion `!table->pos_in_locked_tables' failed in tc_release_table upon
altering table into S3 under lock.
The problem was that thd->open_tables->pos_in_locked_tables was not reset
when alter table failed to reopen a locked table.
MDEV-5589 commit set up a policy to skip DROP TEMPORARY TABLE binary logging
in case the target table has not been "CREATEed" in binlog (no CREATE
Query-log-event was logged into the binary log).
It turns out that
1. the rule did not cover non-existing table DROPped with IF-EXISTS clause.
The logged-create knowledge for the non-existing one does not even need
MDEV-5589 patch, and
2. connection close disobeys it to trigger automatic DROP-IF-EXISTS
binlogging.
Either 1 or 2 or even both is/are also responsible for unexpected binlog
records observed in MDEV-17863, actually rendering a referred
@@global.read_only irrelevant as far as the described stored procedure
definition *and* the ROW binlog-format are concerned.
The problem was two fault:
- flush_tables() wrongly gave errors when failing to open read only tables
- backup_block_ddl() didn't properly ignores errors from flush_tables()
The test case for this will be pushed in 10.5 as the test involves
S3 tables.
cmake -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ -DCMAKE_BUILD_TYPE=Debug
Maintainer mode makes all warnings errors. This patch fix warnings. Mostly about
deprecated `register` keyword.
Too much warnings came from Mroonga and I gave up on it.
as well as
MDEV-19500 Update with join stopped worked if there is a call to a procedure in a trigger
MDEV-19521 Update Table Fails with Trigger and Stored Function
MDEV-19497 Replication stops because table not found
MDEV-19527 UPDATE + JOIN + TRIGGERS = table doesn't exists error
Reimplement the fix for (5d510fdbf0)
MDEV-18507 can't update temporary table when joined with table with triggers on read-only
instead of calling open_tables() twice, put multi-update
prepare code inside open_tables() loop.
Add a test for a MDL backoff-and-retry loop inside open_tables()
across multi-update prepare code.
The bug was that when using mysql_list_fields, then
table_list->schema_table_name was not filled in.
Fixed by using table_list->schema_table instead, which is always
filled in.
Problem:
========
We have a Master/Master Setup on two servers, but are only writing to one of
those servers (so it is essentially Master/Slave) We upgraded from 10.1.* to
10.2.22 last week and starting with the upgrade, we are getting duplicate key
errors on the slave. BINLOG=mixed.
Analysis:
=========
This issue happens with LOCK TABLES and binlog_format=MIXED combination. When an
UNSAFE statement is encountered in 'MIXED' mode, it is logged in the form of
'ROW' format. For all the tables that are part of LOCK TABLES list their table maps
are written into the binary log. For each table in the list a check is
done to see if 'check_table_binlog_row_based_done' flag is set or not. If it is not set
a check process is initiated to see if table qualifies for row based binary
logging or not and 'check_table_binlog_row_based_done' is set. This flag will be
cleared at the time of closing thread tables.
But there can be special cases where the LOCK TABLES contains more number of
tables but the unsafe query is actually using subset of tables from LOCK TABLES
list.
For example: LOCK TABLES locks t1,t2,t3 but the unsafe statement makes use of
only two tables t1,t3. In this case the 'check_table_binlog_row_based_done' flag
is enabled for table 't2' while writing table map, but 'close_thread_tables'
function call will not reset this flag. Since the flag is not cleared for table
't2' even a safe statement which used t2 will be logged in the form of row based
format.
This leads to an assert on debug builds and causes duplicate entries in release
builds. In release builds a statement is logged in the form of both ROW and
STATEMENT format. This causes the slave to fail with duplicate key error.
Fix:
===
During 'close_thread_tables' when LOCK TABLE modes are active "ha_reset" is done
for all the tables which were part of current statement. As mentioned in the
example 'ha_reset' is called for tables 't1' and 't3'. This will clear the
'check_table_binlog_row_based_done' flag. At this point add a check for the rest
of the tables to see if 'check_table_binlog_row_based_done' is enabled or not.
If enabled clear the flag.
Let xid_cache_insert()/xid_cache_delete() handle xa_state.
Let session tracker use is_explicit_XA() rather than xa_state != XA_NOTR.
Fixed open_tables() to refuse data access in XA_ROLLBACK_ONLY state.
Removed dead code from THD::cleanup(). It was supposed to be a reminder,
but it got messed up over time.
spider_internal_start_trx() is called either with XA_NOTR or XA_ACTIVE,
which is guarded by server callers. Thus is_explicit_XA() is acceptable
replacement for XA_ACTIVE check (which was likely wrong anyway).
Setting xa_state to XA_PREPARED in spider_internal_xa_prepare() isn't
meaningful, as this value is never accessed later. It can't be accessed
by current thread and it can't be recovered either. It can only be
accessed by spider internally, which never happens.
Make spider_xa_lock()/spider_xa_unlock() static.
Part of MDEV-7974 - backport fix for mysql bug#12161 (XA and binlog)
