In tests that directly write InnoDB data file pages,
compute the innodb_checksum_algorithm=crc32 checksums,
instead of writing the 0xdeadbeef value used by
innodb_checksum_algorithm=none. In this way, these tests
will not cause failures when executing
./mtr --mysqld=--loose-innodb-checksum-algorithm=strict_crc32
recv_log_recover_10_3(): Determine if a log from MariaDB 10.3 is clean.
recv_find_max_checkpoint(): Allow startup with a clean 10.3 redo log.
srv_prepare_to_delete_redo_log_files(): When starting up with a 10.3 log,
display a "Downgrading redo log" message instead of "Upgrading".
While the redo log format was changed in MariaDB 10.3.2 and 10.3.3
due to MDEV-12288 and MDEV-11369, it should be technically possible
to upgrade from a crashed MariaDB 10.2 instance.
On a related note, it should be possible for Mariabackup 10.3
to create a backup from a running MariaDB Server 10.2.
mlog_id_t: Put back the 10.2 specific redo log record types
MLOG_UNDO_INSERT, MLOG_UNDO_ERASE_END, MLOG_UNDO_INIT,
MLOG_UNDO_HDR_REUSE.
trx_undo_parse_add_undo_rec(): Parse or apply MLOG_UNDO_INSERT.
trx_undo_erase_page_end(): Apply MLOG_UNDO_ERASE_END.
trx_undo_parse_page_init(): Parse or apply MLOG_UNDO_INIT.
trx_undo_parse_page_header_reuse(): Parse or apply MLOG_UNDO_HDR_REUSE.
recv_log_recover_10_2(): Remove. Always parse the redo log from 10.2.
recv_find_max_checkpoint(), recv_recovery_from_checkpoint_start():
Always parse the redo log from MariaDB 10.2.
recv_parse_or_apply_log_rec_body(): Parse or apply
MLOG_UNDO_INSERT, MLOG_UNDO_ERASE_END, MLOG_UNDO_INIT.
srv_prepare_to_delete_redo_log_files(),
innobase_start_or_create_for_mysql(): Upgrade from a previous (supported)
redo log format.
The redo log format will be changed by MDEV-12288, and it could
be changed further during MariaDB 10.3 development. We will
allow startup from a clean redo log from any earlier InnoDB
version (up to MySQL 5.7 or MariaDB 10.3), but we will refuse
to do crash recovery from older-format redo logs.
recv_log_format_0_recover(): Remove a reference to MySQL documentation,
which may be misleading when it comes to MariaDB.
recv_log_recover_10_2(): Check if a MariaDB 10.2.2/MySQL 5.7.9
redo log is clean.
recv_find_max_checkpoint(): Invoke recv_log_recover_10_2() if the
redo log is in the MariaDB 10.2.2 or MySQL 5.7.9 format.
1. Special mode to search in error logs: if SEARCH_RANGE is not set,
the file is considered an error log and the search is performed
since the last CURRENT_TEST: line
2. Number of matches is printed too. "FOUND 5 /foo/ in bar".
Use greedy .* at the end of the pattern if number of matches
isn't stable. If nothing is found it's still "NOT FOUND",
not "FOUND 0".
3. SEARCH_ABORT specifies the prefix of the output.
Can be "NOT FOUND" or "FOUND" as before,
but also "FOUND 5 " if needed.
Provide more useful progress reporting of crash recovery.
recv_sys_t::progress_time: The time of the last report.
recv_sys_t::report(ib_time_t): Determine whether progress should
be reported.
recv_scan_print_counter: Remove.
log_group_read_log_seg(): After after each I/O request, invoke
recv_sys_t::report() and report progress if needed.
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned), and rename the parameter to last_batch.
At the start of each batch, if there are pages to be recovered,
issue a message.
This fixes MySQL Bug#80788 in MariaDB 10.2.5.
When I made the InnoDB crash recovery more robust by implementing
WL#7142, I also introduced an extra redo log scan pass that can be
shortened.
This fix will slightly extend the InnoDB redo log format that I
introduced in MySQL 5.7.9 by writing the start LSN of the MLOG_CHECKPOINT
mini-transaction to the end of the log checkpoint page, so that recovery
can jump straight to it without scanning all the preceding redo log.
LOG_CHECKPOINT_END_LSN: At the end of the checkpoint page, the start LSN
of the MLOG_CHECKPOINT mini-transaction. Previously, these bytes were
written as 0.
log_write_checkpoint_info(), log_group_checkpoint(): Add the parameter
end_lsn for writing LOG_CHECKPOINT_END_LSN.
log_checkpoint(): Remember the LSN at which the MLOG_CHECKPOINT
mini-transaction is starting (or at which the redo log ends on
shutdown).
recv_init_crash_recovery(): Remove.
recv_group_scan_log_recs(): Add the parameter checkpoint_lsn.
recv_recovery_from_checkpoint_start(): Read LOG_CHECKPOINT_END_LSN
and if it is set, start the first scan from it instead of the
checkpoint LSN. Improve some messages and remove bogus assertions.
recv_parse_log_recs(): Do not skip DBUG_PRINT("ib_log") for some
file-level redo log records.
recv_parse_or_apply_log_rec_body(): If we have not parsed all redo
log between the checkpoint and the corresponding MLOG_CHECKPOINT
record, defer the check for MLOG_FILE_DELETE or MLOG_FILE_NAME records
to recv_init_crash_recovery_spaces().
recv_init_crash_recovery_spaces(): Refuse recovery if
MLOG_FILE_NAME or MLOG_FILE_DELETE records are missing.
Write only one encryption key to the checkpoint page.
Use 4 bytes of nonce. Encrypt more of each redo log block,
only skipping the 4-byte field LOG_BLOCK_HDR_NO which the
initialization vector is derived from.
Issue notes, not warning messages for rewriting the redo log files.
recv_recovery_from_checkpoint_finish(): Do not generate any redo log,
because we must avoid that before rewriting the redo log files, or
otherwise a crash during a redo log rewrite (removing or adding
encryption) may end up making the database unrecoverable.
Instead, do these tasks in innobase_start_or_create_for_mysql().
Issue a firm "Missing MLOG_CHECKPOINT" error message. Remove some
unreachable code and duplicated error messages for log corruption.
LOG_HEADER_FORMAT_ENCRYPTED: A flag for identifying an encrypted redo
log format.
log_group_t::is_encrypted(), log_t::is_encrypted(): Determine
if the redo log is in encrypted format.
recv_find_max_checkpoint(): Interpret LOG_HEADER_FORMAT_ENCRYPTED.
srv_prepare_to_delete_redo_log_files(): Display NOTE messages about
adding or removing encryption. Do not issue warnings for redo log
resizing any more.
innobase_start_or_create_for_mysql(): Rebuild the redo logs also when
the encryption changes.
innodb_log_checksums_func_update(): Always use the CRC-32C checksum
if innodb_encrypt_log. If needed, issue a warning
that innodb_encrypt_log implies innodb_log_checksums.
log_group_write_buf(): Compute the checksum on the encrypted
block contents, so that transmission errors or incomplete blocks can be
detected without decrypting.
Rewrite most of the redo log encryption code. Only remember one
encryption key at a time (but remember up to 5 when upgrading from the
MariaDB 10.1 format.)
LOG_CHECKPOINT_ARRAY_END, LOG_CHECKPOINT_SIZE: Remove.
Change some error messages to refer to MariaDB 10.2.2 instead of
MySQL 5.7.9.
recv_find_max_checkpoint_0(): Do not abort when decrypting one of the
checkpoint pages fails.
Test server startup with an empty encrypted redo log from 10.1.21.
FIXME: Pass the encryption parameters. Currently we only test startup
without properly set up encryption.
Remove the dependency on unzip. Instead, generate the InnoDB files
with perl.
log_block_checksum_is_ok(): Correct the error message.
recv_scan_log_recs(): Remove the duplicated error message for
log block checksum mismatch.
innobase_start_or_create_for_mysql(): If the server is in read-only
mode or if innodb_force_recovery>=3, do not try to modify the system
tablespace. (If the doublewrite buffer or the non-core system tables
do not exist, do not try to create them.)
innodb_shutdown(): Relax a debug assertion. If the system tablespace
did not contain a doublewrite buffer and if we started up in
innodb_read_only mode or with innodb_force_recovery>=3, it will not
be created.
dict_create_or_check_sys_tablespace(): Set the flag
srv_sys_tablespaces_open when the tables exist.
