- Revert wrongly record embedded result files. These were either
recorded with normal server (not embedded) or an embedded server
with not default compile option. This can be seen that the committed
result file had replication variables which should never happen.
- Reverted back change of include/is_embedded.inc. One cannot check for
$MYSQL_EMBEDDED as this only tells if there exists an embedded
server, not if the current server we are testing is the embedded
server. This could easily be verified by doing
'mtr sys_vars.sysvars_server_embedded'. This would fail with a wrong
result instead of being marked as skipped as --embedded was not
used.
PR#1127: Fix is_check_constraints.result to be compatibile with 10.3
The patch is done according to the original patch for MDEV-14474
1edd09c325 and not one which is merged on server
d526679efd.
This patch includes:
- Rename from `is_check_constraint` to `is_check_constraints` to tests
and results
- Per review, change the order of fields in IS check_constraints table by adding
the column `table_name` before `constraint_name`. According to the standard
2006 there is no `table_name` column.
- Original patch and one in `10.3` supports embedded server this patch doesn't
support. After the merge `10.3` will not support also.
- Don't use patch c8b8b01b61 to change the length of `CHECK_CLAUSE` field
PR#1150: MDEV-18440: Information_schema.check_constraints possible data leak
This patch is extension of PR 1127 and includes:
- Check for table grants
- Additional test according to the MDEV specification
Signed-off-by: Vicențiu Ciorbaru <vicentiu@mariadb.org>
PR#1127: Fix is_check_constraints.result to be compatibile with 10.3
The patch is done according to the original patch for MDEV-14474
1edd09c325 and not one which is merged on server
d526679efd.
This patch includes:
- Rename from `is_check_constraint` to `is_check_constraints` to tests
and results
- Per review, change the order of fields in IS check_constraints table by adding
the column `table_name` before `constraint_name`. According to the standard
2006 there is no `table_name` column.
- Original patch and one in `10.3` supports embedded server this patch doesn't
support. After the merge `10.3` will not support also.
- Don't use patch c8b8b01b61 to change the length of `CHECK_CLAUSE` field
PR#1150: MDEV-18440: Information_schema.check_constraints possible data leak
This patch is extension of PR 1127 and includes:
- Check for table grants
- Additional test according to the MDEV specification
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
post-merge changes:
* handle password expiration on old tables like everything else -
make changes in memory, even if they cannot be done on disk
* merge "debug" tests with non-debug tests, they don't use dbug anyway
* only run rpl password expiration in MIXED mode, it doesn't replicate
anything, so no need to repeat it thrice
* restore update_user_table_password() prototype, it should not change
ACL_USER, this is done in acl_user_update()
* don't parse json twice in get_password_lifetime and get_password_expired
* remove LEX_USER::is_changing_password, see if there was any auth instead
* avoid overflow in expiration calculations
* don't initialize Account_options in the constructor, it's bzero-ed later
* don't create ulong sysvars - they're not portable, prefer uint or ulonglong
* misc simplifications
This patch adds support for expiring user passwords.
The following statements are extended:
CREATE USER user@localhost PASSWORD EXPIRE [option]
ALTER USER user@localhost PASSWORD EXPIRE [option]
If no option is specified, the password is expired with immediate
effect. If option is DEFAULT, global policy applies according to
the default_password_lifetime system var (if 0, password never
expires, if N, password expires every N days). If option is NEVER,
the password never expires and if option is INTERVAL N DAY, the
password expires every N days.
The feature also supports the disconnect_on_expired_password system
var and the --connect-expired-password client option.
Closes#1166
Implement according to standard SQL specification 2008.
The check_constraints table is used for fetching metadata about
the constraints defined for tables in all databases.
There were some result files which failed after running mtr.
These files are updated with newly create record with mtr --record.
Implement according to standard SQL specification 2008.
The check_constraints table is used for fetching metadata about
the constraints defined for tables in all databases.
This is a 10.3 specific part of MDEV-13049.
It disables automatic sorting for
"SELECT .. FROM INFORMATION_SCHEMA.{SCHEMATA|TABLES}"
and adjusts the affected tests accordingly.
SQL Standard behavior for DROP COLUMN xxx RESTRICT:
* If a constraint (UNIQUE or CHECK) uses only the dropped column,
it's automatically dropped too. If it uses many columns - an error.
Make SELECT <columns> FROM I_S.TABLES behave identically independently
from whether <columns> require opening the table in engine or
<columns> can be filled with only opening the frm.
In particular, fill_schema_table_from_frm() should not silently skip
frms with unknown engine, but should fill the I_S.TABLES row
with NULLs just like fill_schema_table_by_open() does.
* some of these tests run just fine with InnoDB:
-> s/have_xtradb/have_innodb/
* sys_var tests did basic tests for xtradb only variables
-> remove them, they're useless anyway (sysvar_innodb does it better)
* multi_update had innodb specific tests
-> move to multi_update_innodb.test
Decimals with float, double and decimal now works the following way:
- DECIMAL_NOT_SPECIFIED is used when declaring DECIMALS without a firm number
of decimals. It's only used in asserts and my_decimal_int_part.
- FLOATING_POINT_DECIMALS (31) is used to mark that a FLOAT or DOUBLE
was defined without decimals. This is regarded as a floating point value.
- Max decimals allowed for FLOAT and DOUBLE is FLOATING_POINT_DECIMALS-1
- Clients assumes that float and double with decimals >= NOT_FIXED_DEC are
floating point values (no decimals)
- In the .frm decimals=FLOATING_POINT_DECIMALS are used to define
floating point for float and double (31, like before)
To ensure compatibility with old clients we do:
- When storing float and double, we change NOT_FIXED_DEC to
FLOATING_POINT_DECIMALS.
- When creating fields from .frm we change for float and double
FLOATING_POINT_DEC to NOT_FIXED_DEC
- When sending definition for a float/decimal field without decimals
to the client as part of a result set we convert NOT_FIXED_DEC to
FLOATING_POINT_DECIMALS.
- variance() and std() has changed to limit the decimals to
FLOATING_POINT_DECIMALS -1 to not get the double converted floating point.
(This was to preserve compatiblity)
- FLOAT and DOUBLE still have 30 as max number of decimals.
Bugs fixed:
variance() printed more decimals than we support for double values.
New behaviour:
- Strings now have 38 decimals instead of 30 when converted to decimal
- CREATE ... SELECT with a decimal with > 30 decimals will create a column
with a smaller range than before as we are trying to preserve the number of
decimals.
Other changes
- We are now using the obsolete bit FIELDFLAG_LEFT_FULLSCREEN to specify
decimals > 31
- NOT_FIXED_DEC is now declared in one place
- For clients, NOT_FIXED_DEC is always 31 (to ensure compatibility).
On the server NOT_FIXED_DEC is DECIMAL_NOT_SPECIFIED (39)
- AUTO_SEC_PART_DIGITS is taken from DECIMAL_NOT_SPECIFIED
- DOUBLE conversion functions are now using DECIMAL_NOT_SPECIFIED instead of
NOT_FIXED_DEC
length/dec/charset are still in LEX, because they're also used
for CAST and dynamic columns.
also
1. fix "MDEV-7041 COLLATION(CAST('a' AS CHAR BINARY)) returns a wrong result"
2. allow BINARY modifier in stored function RETURN clause
3. allow "COLLATION without CHARSET" in SP/SF (parameters, RETURN, DECLARE)
4. print correct variable name in error messages for stored routine parameters
support ha_innodb.so as a dynamic plugin.
* remove obsolete *,innodb_plugin.rdiff files
* s/--plugin-load=/--plugin-load-add=/
* MYSQL_PLUGIN_IMPORT glob_hostname[]
* use my_error instead of push_warning_printf(ER_DEFAULT)
* don't use tdc_size and tc_size in a module
update test cases (XtraDB is 5.6.14, InnoDB is 5.6.10)
* copy new tests over
* disable some tests for (old) InnoDB
* delete XtraDB tests that no longer apply
small compatibility changes:
* s/HTON_EXTENDED_KEYS/HTON_SUPPORTS_EXTENDED_KEYS/
* revert unnecessary InnoDB changes to make it a bit closer to the upstream
fix XtraDB to compile on Windows (both as a static and a dynamic plugin)
disable XtraDB on Windows (deadlocks) and where no atomic ops are available (e.g. CentOS 5)
storage/innobase/handler/ha_innodb.cc:
revert few unnecessary changes to make it a bit closer to the original InnoDB
storage/innobase/include/univ.i:
correct the version to match what it was merged from
mysql-test/r/keywords.result:
Test that option works as table/column/variable
mysql-test/suite/funcs_1/r/storedproc.result:
OPTION is now a valid identifier
mysql-test/suite/funcs_1/t/storedproc.test:
OPTION is now a valid identifier
mysql-test/t/keywords.test:
Test that option works as table/column/variable
sql/sql_yacc.yy:
OPTION is now a valid identifier
revno: 3383
revision-id: georgi.kodinov@oracle.com-20110818083108-qa3h3ufqu4zne80a
committer: Georgi Kodinov <Georgi.Kodinov@Oracle.com>
timestamp: Thu 2011-08-18 11:31:08 +0300
message:
Bug #11766001: 59026: ALLOW MULTIPLE --PLUGIN-LOAD OPTIONS
Implemented support for a new command line option :
--plugin-load-add=<comma-separated-name-equals-value-list>
This option takes the same type of arguments that --plugin-load does
and complements --plugin-load (that continues to operate as before) by
appending its argument to the list specified by --plugin-load.
So --plugin-load can be considered a composite option consisting of
resetting the plugin load list and then calling --plugin-load-add to process
the argument.
Note that the order in which you specify --plugin-load and --plugin-load-add
is important : "--plugin-load=x --plugin-load-add=y" will be equivalent to
"--plugin-load=x,y" whereas "--plugin-load-add=y --plugin-load=x" will be
equivalent to "plugin-load=x".
Incompatible change : the --help --verbose command will no longer print the
--plugin-load variable's values (as it doesn't have one). Otherwise both --plugin-load
and --plugin-load-add are mentioned in it.
- do not attempt loading federatedx dynamically - does not work on Windows embedded
- race condition in rpl_start_stop_slave
- fix exclusion rule to catch warning in partition test
