rename OPTION_KEEP_LOG -> OPTION_BINLOG_THIS_TRX.
Meaning: transaction cache will be written to binlog even on rollback.
convert log_current_statement to OPTION_BINLOG_THIS_STMT.
Meaning: the statement will be written to binlog (or trx binlog cache)
even if it normally wouldn't be.
setting OPTION_BINLOG_THIS_STMT must always set OPTION_BINLOG_THIS_TRX,
otherwise the statement won't be logged if the transaction is rolled back.
Use OPTION_BINLOG_THIS to set both.
Problem:
========
If a primary is shutdown during an active semi-sync connection
during the period when the primary is awaiting an ACK, the primary
hard kills the active communication thread and does not ensure the
transaction was received by a replica. This can lead to an
inconsistent replication state.
Solution:
========
During shutdown, the primary should wait for an ACK or timeout
before hard killing a thread which is awaiting a communication. We
extend the `SHUTDOWN WAIT FOR SLAVES` logic to identify and ignore
any threads waiting for a semi-sync ACK in phase 1. Then, before
stopping the ack receiver thread, the shutdown is delayed until all
waiting semi-sync connections receive an ACK or time out. The
connections are then killed in phase 2.
Notes:
1) There remains an unresolved corner case that affects this
patch. MDEV-28141: Slave crashes with Packets out of order when
connecting to a shutting down master. Specifically, If a slave is
connecting to a master which is actively shutting down, the slave
can crash with a "Packets out of order" assertion error. To get
around this issue in the MTR tests, the primary will wait a small
amount of time before phase 1 killing threads to let the replicas
safely stop (if applicable).
2) This patch also fixes MDEV-28114: Semi-sync Master ACK Receiver
Thread Can Error on COM_QUIT
Reviewed By
============
Andrei Elkin <andrei.elkin@mariadb.com>
Analysis: There are 2 server variables- "old_mode" and "old". "old" is no
longer needed as "old_mode" has replaced it (however still used in some places
in the code). "old_mode" and "old" has same purpose- emulate behavior from
previous MariaDB versions. So they can be merged to avoid confusion.
Fix: Deprecate "old" variable and create another mode for @@old_mode to mimic
behavior of previous "old" variable. Create specific modes for specifix task
that --old sql variable was doing earlier and use the new modes instead.
the bug was that in_vector array in Item_func_in was allocated in the
statement arena, not in the table->expr_arena.
revert part of the 5acd391e8b. Instead, change the arena correctly
in fix_all_session_vcol_exprs().
Remove TABLE_ARENA, that was introduced in 5acd391e8b to force
item tree changes to be rolled back (because they were allocated in the
wrong arena and didn't persist. now they do)
Problem: In regular replication, when master binlogged using statement format
slave might not have written an event to its binary log when the Query
event aimed at a temporary table.
Specifically this was observed with LOAD DATA INFILE.
This effect was possible because unlike master slave holds temporary
tables in its pool and the master side check of existence of a
temporary table at the format bin-logging decision did not apply.
Solution: replace THD::has_thd_temporary_tables() with
THD::has_temporary_tables which allows to identify temporary table
presence on either side.
--
Reviewed by Andrei Elkin.
Using parallel slave applying can cause deadlock between between DDL and
other events. GTID with lower seqno can be blocked in galera when node
entered TOI mode, but DDL GTID which has higher node can be blocked
before previous GTIDs are applied locally.
Fix is to check prior commits before entering TOI.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Handling BF abort for prepared statement execution so that EXECUTE processing will continue
until parameter setup is complete, before BF abort bails out the statement execution.
THD class has new boolean member: wsrep_delayed_BF_abort, which is set if BF abort is observed
in do_command() right after reading client's packet, and if the client has sent PS execute command.
In such case, the deadlock error is not returned immediately back to client, but the PS execution
will be started. However, the PS execution loop, will now check if wsrep_delayed_BF_abort is set, and
stop the PS execution after the type information has been assigned for the PS.
With this, the PS protocol type information, which is present in the first PS EXECUTE command, is not lost
even if the first PS EXECUTE command was marked to abort.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
extra2_read_len resolved by keeping the implementation
in sql/table.cc by exposed it for use by ha_partition.cc
Remove identical implementation in unireg.h
(ref: bfed2c7d57)
Problem:
Parse-time conversion from binary to tricky character sets like utf32
produced ill-formed strings. So, later a chash happened in debug builds,
or a wrong SHOW CREATE TABLE was returned in release builds.
Fix:
1. Backporting a few methods from 10.3:
- THD::check_string_for_wellformedness()
- THD::convert_string() overloads
- THD::make_text_string_connection()
2. Adding a new method THD::reinterpret_string_from_binary(),
which makes sure to either returns a well-formed string
(optionally prepending with zero bytes), or returns an error.
This commit implements two phase binloggable ALTER.
When a new
@@session.binlog_alter_two_phase = YES
ALTER query gets logged in two parts, the START ALTER and the COMMIT
or ROLLBACK ALTER. START Alter is written in binlog as soon as
necessary locks have been acquired for the table. The timing is
such that any concurrent DML:s that update the same table are either
committed, thus logged into binary log having done work on the old
version of the table, or will be queued for execution on its new
version.
The "COMPLETE" COMMIT or ROLLBACK ALTER are written at the very point
of a normal "single-piece" ALTER that is after the most of
the query work is done. When its result is positive COMMIT ALTER is
written, otherwise ROLLBACK ALTER is written with specific error
happened after START ALTER phase.
Replication of two-phase binloggable ALTER is
cross-version safe. Specifically the OLD slave merely does not
recognized the start alter part, still being able to process and
memorize its gtid.
Two phase logged ALTER is read from binlog by mysqlbinlog to produce
BINLOG 'string', where 'string' contains base64 encoded
Query_log_event containing either the start part of ALTER, or a
completion part. The Query details can be displayed with `-v` flag,
similarly to ROW format events. Notice, mysqlbinlog output containing
parts of two-phase binloggable ALTER is processable correctly only by
binlog_alter_two_phase server.
@@log_warnings > 2 can reveal details of binlogging and slave side
processing of the ALTER parts.
The current commit also carries fixes to the following list of
reported bugs:
MDEV-27511, MDEV-27471, MDEV-27349, MDEV-27628, MDEV-27528.
Thanks to all people involved into early discussion of the feature
including Kristian Nielsen, those who helped to design, implement and
test: Sergei Golubchik, Andrei Elkin who took the burden of the
implemenation completion, Sujatha Sivakumar, Brandon
Nesterenko, Alice Sherepa, Ramesh Sivaraman, Jan Lindstrom.
* preserve DESC index property in the parser
* store it in the frm (only for HA_KEY_ALG_BTREE)
* read it from the frm
* show it in SHOW CREATE
* skip DESC indexes in opt_range.cc and opt_sum.cc
* ORDER BY test
This includes a fix of MDEV-27432.
close_connections() in mysqld.cc sends a signal to all threads.
But InnoDB is too busy purging, doesn't react immediately.
close_connections() waits 20 seconds, which isn't enough in this
particular case, and then unlinks all threads from
the list and forcibly closes their vio connection.
InnoDB background threads have no vio connection to close, but
they're unlinked all the same. So when later they finally notice
the shutdown request and try to unlink themselves, they fail to
assert that they're still linked.
Fix: don't assert_linked, as another thread can unlink this THD anytime
When transaction creates or drops temporary tables and afterward its statement
faces an error even the transactional table statement's cached ROW
format events get involved into binlog and are visible after the transaction's commit.
Fixed with proper analysis of whether the errored-out statement needs
to be rolled back in binlog.
For instance a fact of already cached CREATE or DROP for temporary
tables by previous statements alone
does not cause to retain the being errored-out statement events in the
cache.
Conversely, if the statement creates or drops a temporary table
itself it can't be rolled back - this rule remains.
Mutex order violation when wsrep bf thread kills a conflicting trx,
the stack is
wsrep_thd_LOCK()
wsrep_kill_victim()
lock_rec_other_has_conflicting()
lock_clust_rec_read_check_and_lock()
row_search_mvcc()
ha_innobase::index_read()
ha_innobase::rnd_pos()
handler::ha_rnd_pos()
handler::rnd_pos_by_record()
handler::ha_rnd_pos_by_record()
Rows_log_event::find_row()
Update_rows_log_event::do_exec_row()
Rows_log_event::do_apply_event()
Log_event::apply_event()
wsrep_apply_events()
and mutexes are taken in the order
lock_sys->mutex -> victim_trx->mutex -> victim_thread->LOCK_thd_data
When a normal KILL statement is executed, the stack is
innobase_kill_query()
kill_handlerton()
plugin_foreach_with_mask()
ha_kill_query()
THD::awake()
kill_one_thread()
and mutexes are
victim_thread->LOCK_thd_data -> lock_sys->mutex -> victim_trx->mutex
This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.
In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.
TOI replication is used, in this approach, purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.
This also fixed unprotected calls to wsrep_thd_abort
that will use wsrep_abort_transaction. This is fixed
by holding THD::LOCK_thd_data while we abort transaction.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Mutex order violation when wsrep bf thread kills a conflicting trx,
the stack is
wsrep_thd_LOCK()
wsrep_kill_victim()
lock_rec_other_has_conflicting()
lock_clust_rec_read_check_and_lock()
row_search_mvcc()
ha_innobase::index_read()
ha_innobase::rnd_pos()
handler::ha_rnd_pos()
handler::rnd_pos_by_record()
handler::ha_rnd_pos_by_record()
Rows_log_event::find_row()
Update_rows_log_event::do_exec_row()
Rows_log_event::do_apply_event()
Log_event::apply_event()
wsrep_apply_events()
and mutexes are taken in the order
lock_sys->mutex -> victim_trx->mutex -> victim_thread->LOCK_thd_data
When a normal KILL statement is executed, the stack is
innobase_kill_query()
kill_handlerton()
plugin_foreach_with_mask()
ha_kill_query()
THD::awake()
kill_one_thread()
and mutexes are
victim_thread->LOCK_thd_data -> lock_sys->mutex -> victim_trx->mutex
This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.
In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.
TOI replication is used, in this approach, purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.
This also fixed unprotected calls to wsrep_thd_abort
that will use wsrep_abort_transaction. This is fixed
by holding THD::LOCK_thd_data while we abort transaction.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
When transaction creates or drops temporary tables and afterward its statement
faces an error even the transactional table statement's cached ROW
format events get involved into binlog and are visible after the transaction's commit.
Fixed with proper analysis of whether the errored-out statement needs
to be rolled back in binlog.
For instance a fact of already cached CREATE or DROP for temporary
tables by previous statements alone
does not cause to retain the being errored-out statement events in the
cache.
Conversely, if the statement creates or drops a temporary table
itself it can't be rolled back - this rule remains.
Analysis: Parser was missing ROW_NUMBER as syntax for SIGNAL and RESIGNAL.
Fix: Fix parser and fix how m_row_number is copied like other attributes
to avoid ROW_NUMBER from assuming default value.
