The upper 1M limit for max_prepared_stmt_count was set over 10 years
ago. It doesn't suite current hardware and a sysbench oltp_read_write
test with 512 threads will hit this limit.
MDEV--15609 engines/funcs.crash_manytables_number crashes with error 24
(too many open files)
MDEV-10286 Adjustment of table_open_cache according to system limits
does not work when open-files-limit option is provided
Fixed by adjusting tc_size downwards if there is not enough file
descriptors to use.
Other changes:
- Ensure that there is 30 (was 10) extra file descriptors for other usage
- Decrease TABLE_OPEN_CACHE_MIN to 200 as it's better to have a smaller
table cache than getting error 24
- Increase minimum of max_connections and table_open_cache from 1 to 10
as 1 is not usable for any real application, only for testing.
fix galera.galera_sst_mysqldump test to work:
* must connect to 127.0.0.1, where mysqld is listening
* disable wsrep_sync_wait in wsrep_sst_mysqldump, otherwise
sst can deadlock
* allow 127.0.0.1 for bind_address and wsrep_sst_receive_address.
(it's useful in tests, or when two nodes are on the same box,
or when nodes are on different boxes, but the connection is
tunelled, or whatever. Don't judge user's setup). MDEV-14070
* don't wait for client connections to die when doing
mysqldump sst. they'll die in a due time, and if needed mysql
will wait on locks until they do. MDEV-14069
Also don't mark it big, to make sure it's sufficiently tested
InnoDB in Debian uses utf8mb4 as default character set since
version 10.0.20-2. This leads to major pain due to keys longer
than 767 bytes.
MariaDB 10.2 (and MySQL 5.7) introduced the setting
innodb_default_row_format that is DYNAMIC by default. These
versions also changed the default values of the parameters
innodb_large_prefix=ON and innodb_file_format=Barracuda.
This would allow longer column index prefixes to be created.
The original purpose of these parameters was to allow InnoDB
to be downgraded to MySQL 5.1, which is long out of support.
Every InnoDB version since MySQL 5.5 does support operation
with the relaxed limits.
We backport the parameter innodb_default_row_format to
MariaDB 10.1, but we will keep its default value at COMPACT.
This allows MariaDB 10.1 to be configured so that CREATE TABLE
is less likely to encounter a problem with the limitation:
loose_innodb_large_prefix=ON
loose_innodb_default_row_format=DYNAMIC
(Note that the setting innodb_large_prefix was deprecated in
MariaDB 10.2 and removed in MariaDB 10.3.)
The only observable difference in the behaviour with the default
settings should be that ROW_FORMAT=DYNAMIC tables can be created
both in the system tablespace and in .ibd files, no matter what
innodb_file_format has been assigned to. Unlike MariaDB 10.2,
we are not changing the default value of innodb_file_format,
so ROW_FORMAT=COMPRESSED tables cannot be created without
changing the parameter.
This is 10.1 version where no merge error exists.
wsrep_on_check
New check function. Galera can't be enabled
if innodb-lock-schedule-algorithm=VATS.
innobase_kill_query
In Galera async kill we could own lock mutex.
innobase_init
If Variance-Aware-Transaction-Sheduling Algorithm (VATS) is
used on Galera we refuse to start InnoDB.
Changed innodb-lock-schedule-algorithm as read-only parameter
as it was designed to be.
lock_rec_other_has_expl_req,
lock_rec_other_has_conflicting,
lock_rec_lock_slow
lock_table_other_has_incompatible
lock_rec_insert_check_and_lock
Change pointer to conflicting lock to normal pointer as this
pointer contents could be changed later.
- innodb_buffer_pool_dump_now_basic is modified to make sure it
really performs a dump and waits till it completion, to avoid
the apparent or hidden failure similar to MDEV-9713 / MDEV-10651
- innodb_buffer_pool_dump_pct_basic is modified to re-use the new
code from innodb_buffer_pool_dump_now_basic and thus avoid
the failure MDEV-10651
- innodb_buffer_pool_load_now_basic is re-written to simplify
the logic by re-using the code innodb_buffer_pool_dump_now_basic
and is given an opt file to avoid race conditions with
buffer pool load performed upon server startup, which causes
MDEV-14196 failure
When the server is started in innodb_read_only mode, there cannot be
any writes to persistent InnoDB/XtraDB files. Just like the creation
of buf_flush_page_cleaner_thread is skipped in this case, also
the creation of the XtraDB-specific buf_flush_lru_manager_thread
should be skipped.
Test fails, because of a bug: global delay_key_write is
cached in the THD and the cached value becomes out-of-date
when the global value changes.
This is fixed in MDEV-11335
Rather than bumping the version again,
* d036cc9b2f, and again
* 5a4ec8e60b, and again
* 7f19330c595e3183d079fe2c18eecc74740e8f83;
Just accept version numbers change. Also accept that people may want
to test this against more than one version.
Also, implement MDEV-11027 a little differently from 5.5 and 10.0:
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned).
Report progress also via systemd using sd_notifyf().
Remove the debug parameter innodb_force_recovery_crash that was
introduced into MySQL 5.6 by me in WL#6494 which allowed InnoDB
to resize the redo log on startup.
Let innodb.log_file_size actually start up the server, but ensure
that the InnoDB storage engine refuses to start up in each of the
scenarios.
Tasks:-
Changes in wsrep_dirty_reads variable
1.) Global + Session scope (Current: session-only)
2.) Can be set using command line.
3.) Allow all commands that do not change data (besides SELECT)
4.) Allow prepared Statements that do not change data
5.) Works with wsrep_sync_wait enabled
Increase max number of possible table_open_cache instances from 512K
to 1024K. This only affects user who are trying to set the variable over
the old limit.
Delete not used test table_open_cache_instances_basic
(Need to be added back and rewritten in 10.2)
Previous fix using wait condition did not work because of MDEV-9867, so
we have to use conditional sleep instead. Sleep will only happen if the test
is executed after another one which also ran buffer pool dump without
server restart between two tests
LOG-SLOW-SLAVE-STATEMENTS NOT DISPLAYED.
These parameters were moved from the command line options to
the system variables section. Treatment of the
opt_log_slow_slave_statements changed to let the
dynamic change of the variable.
It could have happened that one of previous tests already executed
buffer pool dump and set the status variable value, so when it's been
checked, the check passes too early, before the dump starts and
the dump file is created. See more detailed explanation in MDEV-9713.
Fixed by waiting for the current time to change in case it equals
to the timestamp in the status variable, and then checking that
the status variable not only matches the expected pattern, but also
differs from the previous value, whatever it was.
