General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
The TABLE::reginfo.impossible_range is used by the optimizer to indicate
that the condition applied to the table is impossible. It wasn't initialized
at table opening and this might lead to an empty result on complex queries:
a query might set the impossible_range flag on a table and when the query finishes,
all tables are returned back to the table cache. The next query that uses the table
with the impossible_range flag set and an index over the table will see the flag
and thus return an empty result.
The open_table function now initializes the TABLE::reginfo.impossible_range
variable.
mysql-test/r/select.result:
A test case for the bug#45266: Uninitialized variable lead to an empty result.
mysql-test/t/select.test:
A test case for the bug#45266: Uninitialized variable lead to an empty result.
sql/sql_base.cc:
Bug#45266: Uninitialized variable lead to an empty result.
The open_table function now initializes the TABLE::reginfo.impossible_range
variable.
sql/sql_select.cc:
Bug#45266: Uninitialized variable lead to an empty result.
The open_table function now initializes the TABLE::reginfo.impossible_range
variable.
sql/structs.h:
Bug#45266: Uninitialized variable lead to an empty result.
A comment is added.
The TABLE::reginfo.impossible_range is used by the optimizer to indicate
that the condition applied to the table is impossible. It wasn't initialized
at table opening and this might lead to an empty result on complex queries:
a query might set the impossible_range flag on a table and when the query finishes,
all tables are returned back to the table cache. The next query that uses the table
with the impossible_range flag set and an index over the table will see the flag
and thus return an empty result.
The open_table function now initializes the TABLE::reginfo.impossible_range
variable.
The problem: described in the bug report.
The fix:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
client/mysql.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/ha_ndbcluster.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/ha_ndbcluster_binlog.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/handler.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/log.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/mysqld.cc:
removed unnecessary line
sql/parse_file.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_acl.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_base.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_db.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_delete.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_partition.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_rename.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_show.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_table.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_view.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
The problem: described in the bug report.
The fix:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
sql/log_event.cc:
Changed constructors of Query_log_event and Execute_load_log_event to accept the error code argument instead of figuring it out by itself
sql/log_event.h:
Changed constructors of Query_log_event and Execute_load_log_event to accept the error code argument
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
mysql-test/r/information_schema.result:
Fixed a result file.
mysql-test/r/innodb-autoinc.result:
Fixed a result file.
mysql-test/t/connect.test:
Fixed a problem with merge, needed to close
connections and use the default
Certain multi-updates gave different results on InnoDB from
to MyISAM, due to on-the-fly updates being used on the former and
the update order matters.
Fixed by turning off on-the-fly updates when update order
dependencies are present.
mysql-test/r/innodb_mysql.result:
Bug#43580: Test result.
mysql-test/suite/rpl/r/rpl_slave_skip.result:
Bug#43580: Changed test result. The InnoDB result is now what it would have been on MyISAM.
mysql-test/t/innodb_mysql.test:
Bug#43580: Test case.
sql/sql_base.cc:
Bug#43580: Added a word of caution about using tmp_set here.
sql/sql_update.cc:
Bug#43580: Fix.
Calls to TABLE::mark_columns_needed_for_update() are moved
from mysql_multi_update_prepare() and right before the decison
to do on-the-fly updates to the place where we do (or don't do)
on-the-fly updates.
Certain multi-updates gave different results on InnoDB from
to MyISAM, due to on-the-fly updates being used on the former and
the update order matters.
Fixed by turning off on-the-fly updates when update order
dependencies are present.
using it.
The crash was due to a null pointer present for select_lex while
processing the view.
Adding a check while opening the view to see if its a child of a
merge table fixed this problem.
mysql-test/r/merge.result:
Updated result for the new test case.
mysql-test/t/merge.test:
Added test case based on the bug description.
sql/sql_base.cc:
Added a check to check if the view being opened is a child table of a
merge table and return error if it is.
using it.
The crash was due to a null pointer present for select_lex while
processing the view.
Adding a check while opening the view to see if its a child of a
merge table fixed this problem.
updates
Attempt to execute trigger or stored function with multi-UPDATE
which used - but didn't update - a table that was also used by
the calling statement led to an error. Read-only reference to
tables used in the calling statement should be allowed.
This problem was caused by the fact that check for conflicting
use of tables in SP/triggers was performed in open_tables(),
and in case of multi-UPDATE we didn't know exact lock type at
this stage.
We solve the problem by moving this check to lock_tables(), so
it can be performed after exact lock types for tables used by
multi-UPDATE are determined.
mysql-test/r/trigger.result:
Results for the added test case is added.
mysql-test/t/trigger.test:
A new test case is added, verifying correct table multi-update
conflict resolution, both read-only and write.
sql/sql_base.cc:
The check for conflicting use of tables in SP/triggers is moved
to lock_tables(), to be performed after the exact lock types
have been determined. Also, an assert is added to open_ltable()
to ensure this func is not used in a prelocked context.
updates
Attempt to execute trigger or stored function with multi-UPDATE
which used - but didn't update - a table that was also used by
the calling statement led to an error. Read-only reference to
tables used in the calling statement should be allowed.
This problem was caused by the fact that check for conflicting
use of tables in SP/triggers was performed in open_tables(),
and in case of multi-UPDATE we didn't know exact lock type at
this stage.
We solve the problem by moving this check to lock_tables(), so
it can be performed after exact lock types for tables used by
multi-UPDATE are determined.
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
of a view are selected by * wildcard
Backported a part of the fix for 36086 to 5.0
mysql-test/r/view_grant.result:
Bug #41354: test case
mysql-test/t/view_grant.test:
Bug #41354: test case
sql/sql_acl.cc:
Bug #41354: return table error when no access and *
sql/sql_base.cc:
Bug #41354: backported the check in bug 36086 to 5.0
slave.
In mixed mode, if we create a temporary table and do some update which switch to ROW format,
the format will keep in ROW format until the session ends or the table is dropped explicitly.
When the session ends, the temp table is dropped automaticly at cleanup time.
but it checks only current binlog format and so skip insertion of DROP TABLE instructions into binlog.
So the temp table can't be dropped correctly at slave.
Our solution is that when closing temp tables at cleanup time we check both binlog format and binlog mode,
and we could write DROP TABLE instructions into binlog if current binlog format is ROW but in MIX mode.
mysql-test/suite/rpl/r/rpl_temp_table_mix_row.result:
Test result file.
mysql-test/suite/rpl/t/rpl_temp_table_mix_row.test:
Test file.
sql/sql_base.cc:
Didn't do binloging when both current format and default format are ROW.
slave.
In mixed mode, if we create a temporary table and do some update which switch to ROW format,
the format will keep in ROW format until the session ends or the table is dropped explicitly.
When the session ends, the temp table is dropped automaticly at cleanup time.
but it checks only current binlog format and so skip insertion of DROP TABLE instructions into binlog.
So the temp table can't be dropped correctly at slave.
Our solution is that when closing temp tables at cleanup time we check both binlog format and binlog mode,
and we could write DROP TABLE instructions into binlog if current binlog format is ROW but in MIX mode.
There were so many changes into mtr (this is the new mtr coming) that I rather
copied mtr from 6.0-main here (at least this one knows how to run Maria tests).
I also fixed suite/maria tests to be accepted by the new mtr.
mysys/thr_mutex.c:
adding DBUG_PRINT here, so that we can locate where the warning is issued.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
TRUNCATE TABLE fails to replicate when stmt-based binlogging is not supported.
There were two separate problems with the code, both of which are fixed with
this patch:
1. An error was printed by InnoDB for TRUNCATE TABLE in statement mode when
the in isolation levels READ COMMITTED and READ UNCOMMITTED since InnoDB
does permit statement-based replication for DML statements. However,
the TRUNCATE TABLE is not transactional, but is a DDL, and should therefore
be allowed to be replicated as a statement.
2. The statement was not logged in mixed mode because of the error above, but
the error was not reported to the client.
This patch fixes the problem by treating TRUNCATE TABLE a DDL, that is, it is
always logged as a statement and not reporting an error from InnoDB for TRUNCATE
TABLE.
mysql-test/extra/binlog_tests/binlog_truncate.test:
Adding new test to check that TRUNCATE TABLE is written correctly
to the binary log.
mysql-test/extra/rpl_tests/rpl_truncate.test:
Removing redundant testing by eliminating settings of BINLOG_FORMAT.
mysql-test/extra/rpl_tests/rpl_truncate_helper.test:
Replacing slave and master reset code with include file.
Removing settings of BINLOG_FORMAT.
Replacing printing of table contents to compare master and slave
with diff_tables.inc.
mysql-test/suite/binlog/t/binlog_truncate_innodb.test:
Adding test for testing that TRUNCATE TABLE is logged correctly for InnoDB
in all isolation levels.
mysql-test/suite/binlog/t/binlog_truncate_myisam.test:
Adding test for testing that TRUNCATE TABLE is logged correctly for MyISAM.
mysql-test/suite/binlog/t/disabled.def:
Disabling binlog_truncate_innodb since it does not work (yet).
sql/sql_base.cc:
Correcting setting of capabilities flags to make the comparison with 0
later in the code work correctly.
sql/sql_delete.cc:
Re-organizing code to ensure that TRUNCATE TABLE is logged in statement
format and that row format is not used unless there are rows to log (which
there are not when delete_all_rows() is called, so this has to be logged
as a statement).
TRUNCATE TABLE fails to replicate when stmt-based binlogging is not supported.
There were two separate problems with the code, both of which are fixed with
this patch:
1. An error was printed by InnoDB for TRUNCATE TABLE in statement mode when
the in isolation levels READ COMMITTED and READ UNCOMMITTED since InnoDB
does permit statement-based replication for DML statements. However,
the TRUNCATE TABLE is not transactional, but is a DDL, and should therefore
be allowed to be replicated as a statement.
2. The statement was not logged in mixed mode because of the error above, but
the error was not reported to the client.
This patch fixes the problem by treating TRUNCATE TABLE a DDL, that is, it is
always logged as a statement and not reporting an error from InnoDB for TRUNCATE
TABLE.
