IPV4/IPV6 ENABLED
Analysis:
----------------------
The problem was that if a hostname resolves to more than one IP-address,
the server (5.5) does not start due to an error. In 5.1 the server used to
take some IP-address and start.
It's a regression and should be fixed.
5.5 supports IPv6, while 5.1 does not. However, that should not
prevent the server from start -- if a hostname has both IPv4 and IPv6 addresses,
the server should choose some IPv4-address and start.
It's been decided to prefer IPv4-address to be backward compatible with 5.1.
Another problem was that the 5.6 server did not report proper error message
when the specified hostname could not be resolved. So, the code has been
changed to report proper error message.
Testing
================================
5.5
=============================
invalid hostname (localhos):
=> Following error message reported.
120308 15:52:09 [ERROR] Can't start server: cannot resolve hostname!
120308 15:52:09 [ERROR] Aborting
invalid ip_address:
=> Following error message reported.
120308 15:56:06 [Note] Server hostname (bind-address): '123.123.123.123'; port: 3306
120308 15:56:06 [Note] - '123.123.123.123' resolves to '123.123.123.123';
120308 15:56:06 [Note] Server socket created on IP: '123.123.123.123'.
120308 15:56:06 [ERROR] Can't start server: Bind on TCP/IP port: Cannot assign requested address
Only ipv4 host configured:
=> Following message logged
120308 16:02:50 [Note] Server hostname (bind-address): 'localhost'; port: 3306
120308 16:02:50 [Note] - 'localhost' resolves to '127.0.0.1';
120308 16:02:50 [Note] Server socket created on IP: '127.0.0.1'
Only ipv6 host configured:
=> Following message logged
120308 16:04:03 [Note] Server hostname (bind-address): 'localhost'; port: 3306
120308 16:04:03 [Note] - 'localhost' resolves to '::1';
120308 16:04:03 [Note] Server socket created on IP: '::1'.
ipv4 and ipv6 host configured:
=> Following message logged
120308 16:05:02 [Note] Server hostname (bind-address): 'localhost'; port: 3306
120308 16:05:02 [Note] - 'localhost' resolves to '::1';
120308 16:05:02 [Note] - 'localhost' resolves to '127.0.0.1';
120308 16:05:02 [Note] Server socket created on IP: '127.0.0.1'.
=> Non localhost address
120308 16:08:20 [Note] Server hostname (bind-address): 'mysql_addr'; port: 3306
120308 16:08:20 [Note] - 'mysql_addr' resolves to '10.178.58.216';
120308 16:08:20 [Note] - 'mysql_addr' resolves to 'fe80::120b:a9ff:fe69:59ec';
120308 16:08:20 [Note] Server socket created on IP: '10.178.58.216'.
More than one entry for ipv4 and ipv6 address:
=> Following message logged
120308 16:06:19 [Note] Server hostname (bind-address): 'localhost'; port: 3306
120308 16:06:19 [Note] - 'localhost' resolves to '::1';
120308 16:06:19 [Note] - 'localhost' resolves to '::1';
120308 16:06:19 [Note] - 'localhost' resolves to '127.0.0.1';
120308 16:06:19 [Note] - 'localhost' resolves to '127.0.0.1';
120308 16:06:19 [Note] Server socket created on IP: '127.0.0.1'.
IPV4/IPV6 ENABLED
Analysis:
----------------------
The problem was that if a hostname resolves to more than one IP-address,
the server (5.5) does not start due to an error. In 5.1 the server used to
take some IP-address and start.
It's a regression and should be fixed.
5.5 supports IPv6, while 5.1 does not. However, that should not
prevent the server from start -- if a hostname has both IPv4 and IPv6 addresses,
the server should choose some IPv4-address and start.
It's been decided to prefer IPv4-address to be backward compatible with 5.1.
Another problem was that the 5.6 server did not report proper error message
when the specified hostname could not be resolved. So, the code has been
changed to report proper error message.
Testing
================================
5.5
=============================
invalid hostname (localhos):
=> Following error message reported.
120308 15:52:09 [ERROR] Can't start server: cannot resolve hostname!
120308 15:52:09 [ERROR] Aborting
invalid ip_address:
=> Following error message reported.
120308 15:56:06 [Note] Server hostname (bind-address): '123.123.123.123'; port: 3306
120308 15:56:06 [Note] - '123.123.123.123' resolves to '123.123.123.123';
120308 15:56:06 [Note] Server socket created on IP: '123.123.123.123'.
120308 15:56:06 [ERROR] Can't start server: Bind on TCP/IP port: Cannot assign requested address
Only ipv4 host configured:
=> Following message logged
120308 16:02:50 [Note] Server hostname (bind-address): 'localhost'; port: 3306
120308 16:02:50 [Note] - 'localhost' resolves to '127.0.0.1';
120308 16:02:50 [Note] Server socket created on IP: '127.0.0.1'
Only ipv6 host configured:
=> Following message logged
120308 16:04:03 [Note] Server hostname (bind-address): 'localhost'; port: 3306
120308 16:04:03 [Note] - 'localhost' resolves to '::1';
120308 16:04:03 [Note] Server socket created on IP: '::1'.
ipv4 and ipv6 host configured:
=> Following message logged
120308 16:05:02 [Note] Server hostname (bind-address): 'localhost'; port: 3306
120308 16:05:02 [Note] - 'localhost' resolves to '::1';
120308 16:05:02 [Note] - 'localhost' resolves to '127.0.0.1';
120308 16:05:02 [Note] Server socket created on IP: '127.0.0.1'.
=> Non localhost address
120308 16:08:20 [Note] Server hostname (bind-address): 'mysql_addr'; port: 3306
120308 16:08:20 [Note] - 'mysql_addr' resolves to '10.178.58.216';
120308 16:08:20 [Note] - 'mysql_addr' resolves to 'fe80::120b:a9ff:fe69:59ec';
120308 16:08:20 [Note] Server socket created on IP: '10.178.58.216'.
More than one entry for ipv4 and ipv6 address:
=> Following message logged
120308 16:06:19 [Note] Server hostname (bind-address): 'localhost'; port: 3306
120308 16:06:19 [Note] - 'localhost' resolves to '::1';
120308 16:06:19 [Note] - 'localhost' resolves to '::1';
120308 16:06:19 [Note] - 'localhost' resolves to '127.0.0.1';
120308 16:06:19 [Note] - 'localhost' resolves to '127.0.0.1';
120308 16:06:19 [Note] Server socket created on IP: '127.0.0.1'.
Fixed compilation problem on windows.
configure.cmake:
Added test for pthread_attr_getguardsize
include/my_stacktrace.h:
Define dummy my_init_stacktrace() to allow one to call it without #ifdef HAVE_STACKTRACE
sql/mysqld.cc:
Move my_setstacksize() to fix compilation problem on windows
Don't disable core on signal just becasue platform doesn't handle stack trace
Fixed failing tests in sys_vars as we have now stricter checking of setting of variables.
mysql-test/suite/sys_vars/r/innodb_adaptive_flushing_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_adaptive_hash_index_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_large_prefix_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_random_read_ahead_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_stats_on_metadata_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_strict_mode_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_support_xa_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_table_locks_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/rpl_semi_sync_master_enabled_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/rpl_semi_sync_slave_enabled_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_adaptive_flushing_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_adaptive_hash_index_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_large_prefix_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_random_read_ahead_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_stats_on_metadata_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_strict_mode_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_support_xa_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_table_locks_basic.test:
One can now only assign 0 or 1 to boolean variables
mysys/my_getsystime.c:
Merge + fixed bug that __NR_clock_gettime didn't work in 5.5
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
modified for MySQL 5.5. Logger service moved to the
plugin/sql_errlog directory to be properly used later.
plugin/sql_errlog/sql_errlog.c:
Fixes for bugs #956427 (SQL_ERROR_LOG plugin produces bogus warnings about sql-error-log-size-limit value) and #956463 (Server crashes if SQL_ERROR_LOG fails to initialize) they're also MDEV-184 and MDEV-183
The sql_error_log_deinit() should be prepared for the logger_file to be NULL.
The logger_file_size_limit upper limit wasn't properly set.
- Don't use SAFEMALLOC on valgrind builds (slows things down)
- Added back lost option from 5.3: debug-mutex-deadlock-detector
- Flush pages before taking lock mutex (speeds up closing of Aria tables).
BUILD/SETUP.sh:
- Don't use SAFEMALLOC on valgrind builds (slows things down)
sql/lock.cc:
Make default argument explicit (improves readability)
sql/mysqld.cc:
Removed compiler warnings
Sorted debug options alphabetically
Added back lost option from 5.3: debug-mutex-deadlock-detector
storage/maria/ma_close.c:
Flush pages before taking lock mutex (speeds up closing of Aria tables).
storage/maria/ma_open.c:
More DBUG_PRINT
storage/maria/maria_def.h:
Better DBUG_PRINT
storage/maria/trnman.c:
Better DBUG_PRINT
Added the logger service that provides us with the rotating logs.
The plugin SQL_ERROR_LOG added. It logs the errors using the 'logger service'
for the rotating log files.
the example record from the log:
2012-03-09 15:07:29 root[root] @ localhost [] ERROR 1146: Table 'test.xyz' doesn't exist : select * from test.xyz
storage/innobase/include/sync0rw.ic:
Prerequisite for compiling with gcc4 on solaris: ignore result from
os_compare_and_swap_ulint
storage/myisam/mi_dynrec.c:
Prerequisite for compiling with gcc4 on solaris: cast to void*
Problem - The default port number shown in SHOW SLAVE HOSTS is always 3306
though the slave is actually listening on a different port number.
This is a problem as the user can not be sure whether this port
value can be trusted and so client trying to read replication
topology can get confused.
Fix - 3306 ceases to be the default value of report-port. Moreover report-port
does not have a static default any longer.
Instead we initialize report-port to 0 as the new default value and change
it based on two checks :
1) If report_port is not set, the slave reports the port number its listening
on. (i.e. if report-port is not set we get the actual value of the slave's
port number).
2) If report-port is set, we show the value report-port is set to, as the slave's
port number.
mysql-test/include/show_slave_hosts.inc:
A .inc file is added to use show slave hosts in the new test added.
mysql-test/r/mysqld--help-notwin.result:
Updated the result file to show the default value passed for report-port.
mysql-test/suite/rpl/r/rpl_report_port.result:
The result file for the new test that is added.
mysql-test/suite/rpl/r/rpl_show_slave_hosts.result:
Updated the result file to show the default value passed for report-port.
mysql-test/suite/rpl/t/rpl_report_port-slave.opt:
Option file for the new test added.
mysql-test/suite/rpl/t/rpl_report_port.test:
Added a test to check the correct functionality of report-port.
We check this by running the replication twice.
In the first run we do not set the value of report-port through the opt file
and get the actual port number of the slave's port.
We then restart the server with report-port set to some value (in this case 9000)
and check the value reported for the slave's port number.
mysql-test/suite/sys_vars/t/report_port_basic.test:
Update the test file to show the value for report-port. It is replaced with
SLAVE_PORT as the actual value of the report-port will change with each run.
sql/mysqld.cc:
Changed the value reported by report port :
1. If the value for report-port is not set we assign report-port to be the
actual port number of the slave (mysqld_port).
2. If report-port is set we get the value set for the report-port.
sql/sys_vars.cc:
Passed 0 as the default value of the report-port.
Problem - The default port number shown in SHOW SLAVE HOSTS is always 3306
though the slave is actually listening on a different port number.
This is a problem as the user can not be sure whether this port
value can be trusted and so client trying to read replication
topology can get confused.
Fix - 3306 ceases to be the default value of report-port. Moreover report-port
does not have a static default any longer.
Instead we initialize report-port to 0 as the new default value and change
it based on two checks :
1) If report_port is not set, the slave reports the port number its listening
on. (i.e. if report-port is not set we get the actual value of the slave's
port number).
2) If report-port is set, we show the value report-port is set to, as the slave's
port number.
Fix memory leak in one error case in mysqldump.
Fix that HAVE_VALGRIND_VALGRIND_H is now HAVE_VALGRIND in 5.5.
Fix that @have_ssl should not be set in embedded (introduced when
removing #undef HAVE_OPENSSL from my_global.h).
Fixed README with link to source
Merged InnoDB change to XtraDB
README:
Added information of where to find MariaDB code
storage/archive/ha_archive.cc:
Removed memset() of rows, a MariaDB checksum's doesn't touch not used data.
On shutdown(), Windows can drop traffic still queued for sending even if that
wasn't specifically requested. As a result, fatal errors (those after
signaling which the server will drop the connection) were sometimes only
seen as "connection lost" on the client side, because the server-side
shutdown() erraneously discarded the correct error message before sending
it.
If on Windows, we now use the Windows API to access the (non-broken) equivalent
of shutdown().
Backport from trunk
On shutdown(), Windows can drop traffic still queued for sending even if that
wasn't specifically requested. As a result, fatal errors (those after
signaling which the server will drop the connection) were sometimes only
seen as "connection lost" on the client side, because the server-side
shutdown() erraneously discarded the correct error message before sending
it.
If on Windows, we now use the Windows API to access the (non-broken) equivalent
of shutdown().
Backport from trunk
On shutdown(), Windows can drop traffic still queued for sending even if that
wasn't specifically requested. As a result, fatal errors (those after
signaling which the server will drop the connection) were sometimes only
seen as "connection lost" on the client side, because the server-side
shutdown() erraneously discarded the correct error message before sending
it.
If on Windows, we now use the Windows API to access the (non-broken) equivalent
of shutdown().
Backport from trunk
include/violite.h:
export mysql_socket_shutdown(). It lives in vio in the backport.
sql/mysqld.cc:
Go through our own shutdown() rather than straight to the POSIX one.
vio/viosocket.c:
Define mysql_socket_shutdown(). On UNIXoid systems, it's just a wrapper for shutdown(), but
on Window, it uses DisconnectEx, which is magic.
