Since MDEV-18778, timezone tables get changed to innodb
to allow them to be replicated to other galera nodes.
Even without galera, timezone tables could be declared innodb.
With the standalone innodb tables, the mysql_tzinfo_to_sql takes
approximately 27 seconds.
With the transactions enabled in this patch, 1.2 seconds is
the approximate load time.
While explicit checks for the engine of the time zone tables could be
done, or checks against !opt_skip_write_binlog, non-transactional
storage engines will just ignore the transactional state without
even a warning so its safe to enact globally.
Leap seconds are pretty much ignored as they are a single insert
statement and have gone out of favour as they have caused MariaDB
stalls in the past.
When binlog is disabled, WSREP will not behave correctly when
SAVEPOINT ROLLBACK is executed since we don't register handlers for such case.
Fixed by registering WSREP handlerton for SAVEPOINT related commands.
For MDEV-15955, the fix in create_tmp_field_from_item() would cause a
compilation error. After a discussion with Alexander Barkov, the fix
was omitted and only the test case was kept.
In 10.3 and later, MDEV-15955 is fixed properly by overriding
create_tmp_field() in Item_func_user_var.
There were two problems:
(1) If user wanted same time zone information on all nodes in the Galera
cluster all updates were not replicated as time zone information was
stored on MyISAM tables. This is fixed on Galera by altering time zone
tables to InnoDB while they are modified.
(2) If user wanted different time zone information to nodes in the Galera
cluster TRUNCATE TABLE for time zone tables was replicated by Galera
destroying time zone information from other nodes. This is fixed
on Galera by introducing new option for mysql_tzinfo_to_sql_symlink
tool --skip-write-binlog to disable Galera replication while
time zone tables are modified.
Changes to be committed:
modified: mysql-test/r/mysql_tzinfo_to_sql_symlink.result
modified: mysql-test/suite/wsrep/r/mysql_tzinfo_to_sql_symlink.result
new file: mysql-test/suite/wsrep/r/mysql_tzinfo_to_sql_symlink_skip.result
new file: mysql-test/suite/wsrep/t/mysql_tzinfo_to_sql_symlink_skip.test
modified: sql/tztime.cc
Problem was that tests select INFORMATION_SCHEMA.PROCESSLIST processes
from user system user and empty state. Thus, there is not clear
state for slave threads.
Changes:
- Added new status variables that store current amount of applier threads
(wsrep_applier_thread_count) and rollbacker threads
(wsrep_rollbacker_thread_count). This will make clear how many slave threads
of certain type there is.
- Added THD state "wsrep applier idle" when applier slave thread is
waiting for work. This makes finding slave/applier threads easier.
- Added force-restart option for mtr to always restart servers between tests
to avoid race on start of the test
- Added wait_condition_with_debug to wait until the passed statement returns
true, or the operation times out. If operation times out, the additional error
statement will be executed
Changes to be committed:
new file: mysql-test/include/force_restart.inc
new file: mysql-test/include/wait_condition_with_debug.inc
modified: mysql-test/mysql-test-run.pl
modified: mysql-test/suite/galera/disabled.def
modified: mysql-test/suite/galera/r/MW-336.result
modified: mysql-test/suite/galera/r/galera_kill_applier.result
modified: mysql-test/suite/galera/r/galera_var_slave_threads.result
new file: mysql-test/suite/galera/t/MW-336.cnf
modified: mysql-test/suite/galera/t/MW-336.test
modified: mysql-test/suite/galera/t/galera_kill_applier.test
modified: mysql-test/suite/galera/t/galera_parallel_autoinc_largetrx.test
modified: mysql-test/suite/galera/t/galera_parallel_autoinc_manytrx.test
modified: mysql-test/suite/galera/t/galera_var_slave_threads.test
modified: mysql-test/suite/wsrep/disabled.def
modified: mysql-test/suite/wsrep/r/variables.result
modified: mysql-test/suite/wsrep/t/variables.test
modified: sql/mysqld.cc
modified: sql/wsrep_mysqld.cc
modified: sql/wsrep_mysqld.h
modified: sql/wsrep_thd.cc
modified: sql/wsrep_var.cc
MDEV-17058: Test failure on wsrep.variables
MDEV-17060: Test failure on galera.galera_var_slave_threads
Fix incorrect calculation of increased applier (slave) threads.
Note that increase change takes effect "immediately" but we should
use proper wait condition to wait it. Reducing the number of
slave threads is not immediate as thread will only exit after a
replication event.
The value of wsrep_affected_rows were not reseted properly for
slave. Now we also wsrep_affected_rows in Xid_log_event::do_apply_event
also , apart from THD::cleanup_after_query().
Signed-off-by: Sachin Setiya <sachin.setiya@mariadb.com>
==== Description ====
Flashback can rollback the instances/databases/tables to an old snapshot.
It's implement on Server-Level by full image format binary logs (--binlog-row-image=FULL), so it supports all engines.
Currently, it’s a feature inside mysqlbinlog tool (with --flashback arguments).
Because the flashback binlog events will store in the memory, you should check if there is enough memory in your machine.
==== New Arguments to mysqlbinlog ====
--flashback (-B)
It will let mysqlbinlog to work on FLASHBACK mode.
==== New Arguments to mysqld ====
--flashback
Setup the server to use flashback. This enables binary log in row mode
and will enable extra logging for DDL's needed by flashback feature
==== Example ====
I have a table "t" in database "test", we can compare the output with "--flashback" and without.
#client/mysqlbinlog /data/mysqldata_10.0/binlog/mysql-bin.000001 -vv -d test -T t --start-datetime="2013-03-27 14:54:00" > /tmp/1.sql
#client/mysqlbinlog /data/mysqldata_10.0/binlog/mysql-bin.000001 -vv -d test -T t --start-datetime="2013-03-27 14:54:00" -B > /tmp/2.sql
Then, importing the output flashback file (/tmp/2.log), it can flashback your database/table to the special time (--start-datetime).
And if you know the exact postion, "--start-postion" is also works, mysqlbinlog will output the flashback logs that can flashback to "--start-postion" position.
==== Implement ====
1. As we know, if binlog_format is ROW (binlog-row-image=FULL in 10.1 and later), all columns value are store in the row event, so we can get the data before mis-operation.
2. Just do following things:
2.1 Change Event Type, INSERT->DELETE, DELETE->INSERT.
For example:
INSERT INTO t VALUES (...) ---> DELETE FROM t WHERE ...
DELETE FROM t ... ---> INSERT INTO t VALUES (...)
2.2 For Update_Event, swapping the SET part and WHERE part.
For example:
UPDATE t SET cols1 = vals1 WHERE cols2 = vals2
--->
UPDATE t SET cols2 = vals2 WHERE cols1 = vals1
2.3 For Multi-Rows Event, reverse the rows sequence, from the last row to the first row.
For example:
DELETE FROM t WHERE id=1; DELETE FROM t WHERE id=2; ...; DELETE FROM t WHERE id=n;
--->
DELETE FROM t WHERE id=n; ...; DELETE FROM t WHERE id=2; DELETE FROM t WHERE id=1;
2.4 Output those events from the last one to the first one which mis-operation happened.
For example:
In CTAS, handlers get registered under statement transaction
(st_transactions::stmt), while ha_fake_trx_id(), used by CTAS,
looked under standard transaction (st_transactions::all) for
registered handlers, and thus it failed to grab a fake transaction
ID. As a result, with no valid transaction ID, wsrep commit failed
with an error.
ha_fake_trx_id() now looks for handlers registered under 'stmt'
in case 'all' is empty. Also modified the logic to print warning
only once if none of the registered handlers have fake_trx_id.
On wsrep_cluster_address update, node restarts the replication
and attempts to connect to the new address. In this process it
makes a call to wsrep provider's connect API, which could lead
to segfault if wsrep provider is not loaded (wsrep_on=OFF).
Fixed by making sure that it proceeds only if a provider is
loaded.
