InnoDB transactions may be reused after committed:
- when taken from the transaction pool
- during a DDL operation execution
In this case wsrep flag on trx object is cleared, which may cause wrong
execution logic afterwards (wsrep-related hooks are not run).
Make trx->wsrep flag initialize from THD object only once on InnoDB transaction
start and don't change it throughout the transaction's lifetime.
The flag is reset at commit time as before.
Unconditionally set wsrep=OFF for THD objects that represent InnoDB background
threads.
Make Wsrep_schema::store_view() operate in its own transaction.
Fix streaming replication transactions' fragments rollback to not switch
THD->wsrep value during transaction's execution
(use THD->wsrep_ignore_table as a workaround).
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Under unknown circumstances, the SQL layer may wrongly disregard an
invocation of thd_mark_transaction_to_rollback() when an InnoDB
transaction had been aborted (rolled back) due to one of the following errors:
* HA_ERR_LOCK_DEADLOCK
* HA_ERR_RECORD_CHANGED (if innodb_snapshot_isolation=ON)
* HA_ERR_LOCK_WAIT_TIMEOUT (if innodb_rollback_on_timeout=ON)
Such an error used to cause a crash of InnoDB during transaction commit.
These changes aim to catch and report the error earlier, so that not only
this crash can be avoided but also the original root cause be found and
fixed more easily later.
The idea of this fix is from Michael 'Monty' Widenius.
HA_ERR_ROLLBACK: A new error code that will be translated into
ER_ROLLBACK_ONLY, signalling that the current transaction
has been aborted and the only allowed action is ROLLBACK.
trx_t::state: Add TRX_STATE_ABORTED that is like
TRX_STATE_NOT_STARTED, but noting that the transaction had been
rolled back and aborted.
trx_t::is_started(): Replaces trx_is_started().
ha_innobase: Check the transaction state in various places.
Simplify the logic around SAVEPOINT.
ha_innobase::is_valid_trx(): Replaces ha_innobase::is_read_only().
The InnoDB logic around transaction savepoints, commit, and rollback
was unnecessarily complex and might have contributed to this
inconsistency. So, we are simplifying that logic as well.
trx_savept_t: Replace with const undo_no_t*. When we rollback to
a savepoint, all we need to know is the number of undo log records
that must survive.
trx_named_savept_t, DB_NO_SAVEPOINT: Remove. We can store undo_no_t
directly in the space allocated at innobase_hton->savepoint_offset.
fts_trx_create(): Do not copy previous savepoints.
fts_savepoint_rollback(): If a savepoint was not found, roll back
everything after the default savepoint of fts_trx_create().
The test innodb_fts.savepoint is extended to cover this code.
Reviewed by: Vladislav Lesin
Tested by: Matthias Leich
Partial commit of the greater MDEV-34348 scope.
MDEV-34348: MariaDB is violating clang-16 -Wcast-function-type-strict
Reviewed By:
============
Marko Mäkelä <marko.makela@mariadb.com>
Partial commit of the greater MDEV-34348 scope.
MDEV-34348: MariaDB is violating clang-16 -Wcast-function-type-strict
The functions queue_compare, qsort2_cmp, and qsort_cmp2
all had similar interfaces, and were used interchangable
and unsafely cast to one another.
This patch consolidates the functions all into the
qsort_cmp2 interface.
Reviewed By:
============
Marko Mäkelä <marko.makela@mariadb.com>
This is an extension of MDEV-30423 "Deadlock on Replica during BACKUP
STAGE BLOCK_COMMIT on XA transactions"
The original commit in MDEV-30423 was not complete as some usage in XA of
MDL_BACKUP_COMMIT locks did not set thd->backup_commit_lock.
This is required to be set when using parallel replication.
Fixed by ensuring that all usage of BACKUP_COMMIT lock i XA is uniform and
all sets thd->backup_commit_lock. I also changed all locks to be
MDL_EXPLICIT to keep also that part uniform.
A regression test is added.
work consistently on replication
Row-based replication does not execute CREATE .. SELECT but instead
CREATE TABLE. CREATE .. SELECT creates implict system fields on
unusual place: in-between declared fields and select fields. That was
done because select_field_pos logic requires select fields go last in
create_list.
So, CREATE .. SELECT on master and CREATE TABLE on slave create system
fields on different positions and replication gets field mismatch.
To fix this we've changed CREATE .. SELECT to create implicit system
fields on usual place in the end and updated select_field_pos for
handling this case.
Search conditions were evaluated using val_int(), which was wrong.
Fixing the code to use val_bool() instead.
Details:
- Adding a new item_base_t::IS_COND flag which marks Items used
as <search condition> in WHERE, HAVING, JOIN ON, CASE WHEN clauses.
The flag is at the parse time.
These expressions must be evaluated using val_bool() rather than val_int().
Note, the optimizer creates more Items which are used as search conditions.
Most of these items are not marked with IS_COND yet. This is OK for now,
but eventually these Items can also be fixed to have the flag.
- Adding a method Item::is_cond() which tests if the Item has the IS_COND flag.
- Implementing Item_cache_bool. It evaluates the cached expression using
val_bool() rather than val_int().
Overriding Type_handler_bool::Item_get_cache() to create Item_cache_bool.
- Implementing Item::save_bool_in_field(). It uses val_bool() rather than
val_int() to evaluate the expression.
- Implementing Type_handler_bool::Item_save_in_field()
using Item::save_bool_in_field().
- Fixing all Item_bool_func descendants to implement a virtual val_bool()
rather than a virtual val_int().
- To find places where val_int() should be fixed to val_bool(), a few
DBUG_ASSERT(!is_cond()) where added into val_int() implementations
of selected (most frequent) classes:
Item_field
Item_str_func
Item_datefunc
Item_timefunc
Item_datetimefunc
Item_cache_bool
Item_bool_func
Item_func_hybrid_field_type
Item_basic_constant descendants
- Fixing all places where DBUG_ASSERT() happened during an "mtr" run
to use val_bool() instead of val_int().
ENGINE_SUBSTITUTION only applies to CREATE TABLE and ALTER TABLE, and
Storage_engine_name::resolve_storage_engine_with_error() could be
called when executing any sql command.
There are two problems.
First, replication fails when XA transactions are used where the
slave has replicate_do_db set and the client has touched a different
database when running DML such as inserts. This is because XA
commands are not treated as keywords, and are thereby not exempt
from the replication filter. The effect of this is that during an XA
transaction, if its logged “use db” from the master is filtered out
by the replication filter, then XA END will be ignored, yet its
corresponding XA PREPARE will be executed in an invalid state,
thereby breaking replication.
Second, if the slave replicates an XA transaction which results in
an empty transaction, the XA START through XA PREPARE first phase of
the transaction won’t be binlogged, yet the XA COMMIT will be
binlogged. This will break replication in chain configurations.
The first problem is fixed by treating XA commands in
Query_log_event as keywords, thus allowing them to bypass the
replication filter. Note that Query_log_event::is_trans_keyword() is
changed to accept a new parameter to define its mode, to either
check for XA commands or regular transaction commands, but not both.
In addition, mysqlbinlog is adapted to use this mode so its
--database filter does not remove XA commands from its output.
The second problem fixed by overwriting the XA state in the XID
cache to be XA_ROLLBACK_ONLY, so at commit time, the server knows to
rollback the transaction and skip its binlogging. If the xid cache
is cleared before an XA transaction receives its completion command
(e.g. on server shutdown), then before reporting ER_XAER_NOTA when
the completion command is executed, the filter is first checked if
the database is ignored, and if so, the error is ignored.
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Andrei Elkin <andrei.elkin@mariadb.com>
InnoDB transactions may be reused after committed:
- when taken from the transaction pool
- during a DDL operation execution
In this case wsrep flag on trx object is cleared, which may cause wrong
execution logic afterwards (wsrep-related hooks are not run).
Make trx->wsrep flag initialize from THD object only once on InnoDB transaction
start and don't change it throughout the transaction's lifetime.
The flag is reset at commit time as before.
Unconditionally set wsrep=OFF for THD objects that represent InnoDB background
threads.
Make Wsrep_schema::store_view() operate in its own transaction.
Fix streaming replication transactions' fragments rollback to not switch
THD->wsrep value during transaction's execution
(use THD->wsrep_ignore_table as a workaround).
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Correct the second parameter for strxnmov to prevent potential buffer
overflows. The second parameter must be one less than the size of the
input buffer to avoid writing past the end of the buffer.
While the second parameter is usually correct, there are exceptions
that need fixing.
This commit addresses the issue within frm_file_exists() and other
affected places.
on disable_indexes(HA_KEY_SWITCH_NONUNIQ_SAVE) the engine does
not know that the long unique is logically unique, because on the
engine level it is not. And the engine disables it,
Change the disable_indexes/enable_indexes API. Instead of the enum
mode, send a key_map of indexes that should be enabled. This way the
server will decide what is unique, not the engine.
When HA_DUPLICATE_POS is not supported, the row to replace was navigated by
ha_index_read_idx_map, which uses only hash to navigate.
Suchwise, given a hash collision it may choose an incorrect row.
handler::position would be correct and very convenient to use here.
dup_ref is already set by handler independently of the engine
capabilities, when an extra lookup is made (for long unique or something else,
for example WITHOUT OVERLAPS) such error will be indicated by
file->lookup_errkey != -1.
The two I_S plugins SPIDER_ALLOC_MEM and SPIDER_WRAPPER_PROTOCOL
only makes sense if the main SPIDER plugin is installed. Further,
SPIDER_ALLOC_MEM requires a mutex that requires SPIDER init to fill
the table.
We also update the spider init query to override
--transaction_read_only=on so that it does not affect the spider init.
Also fixed error handling in spider_db_init() so that failure in
spider table init does not result in memory leak
create_partitioning_metadata() should only mark transaction r/w
if it actually did anything (that is, the table is partitioned).
otherwise it's a no-op, called even for temporary tables and
it shouldn't do anything at all
Problem was too tight condition on ha_commit_trans to not
allow non transactional storage engines participate 2pc
in Galera case. This is required because transaction
using e.g. procedures might read mysql.proc table inside
a trasaction and these tables use at the moment Aria
storage engine that does not support 2pc.
Fixed by allowing read only transactions to storage
engines that do not support two phase commit to participate
2pc transaction. These will be committed later separately.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Fix in this commit handles foreign key value appending into write set
so that db and table names are converted from the filepath format
to tablename format. This is compatible with key values appended from
elsewhere in the code base
There is a mtr test galera.galera_table_with_hyphen for regression testing
Reviewer: monty@mariadb.com
Aria temporary tables account allocated memory as specific to the current
THD. But this fails for slave threads, where the temporary tables need to be
detached from any specific THD.
Introduce a new flag to mark temporary tables in replication as "global",
and use that inside Aria to not account memory allocations as thread
specific for such tables.
Based on original suggestion by Monty.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
MDEV-33308 CHECK TABLE is modifying .frm file even if --read-only
As noted in commit d0ef1aaf61,
MySQL as well as older versions of MariaDB server would during
ALTER TABLE ... IMPORT TABLESPACE write bogus values to the
PAGE_MAX_TRX_ID field to pages of the clustered index, instead of
letting that field remain 0.
In commit 8777458a6e this field
was repurposed for PAGE_ROOT_AUTO_INC in the clustered index root page.
To avoid trouble when upgrading from MySQL or older versions of MariaDB,
we will try to detect and correct bogus values of PAGE_ROOT_AUTO_INC
when opening a table for the first time from the SQL layer.
btr_read_autoinc_with_fallback(): Add the parameters to mysql_version,max
to indicate the TABLE_SHARE::mysql_version of the .frm file and the
maximum value allowed for the type of the AUTO_INCREMENT column.
In case the table was originally created in MySQL or an older version of
MariaDB, read also the maximum value of the AUTO_INCREMENT column from
the table and reset the PAGE_ROOT_AUTO_INC if it is above the limit.
dict_table_t::get_index(const dict_col_t &) const: Find an index that
starts with the specified column.
ha_innobase::check_for_upgrade(): Return HA_ADMIN_FAILED if InnoDB
needs upgrading but is in read-only mode. In this way, the call to
update_frm_version() will be skipped.
row_import_autoinc(): Adjust the AUTO_INCREMENT column at the end of
ALTER TABLE...IMPORT TABLESPACE. This refinement was suggested by
Debarun Banerjee.
The changes outside InnoDB were developed by Michael 'Monty' Widenius:
Added print_check_msg() service for easy reporting of check/repair messages
in ENGINE=Aria and ENGINE=InnoDB.
Fixed that CHECK TABLE do not update the .frm file under --read-only.
Added 'handler_flags' to HA_CHECK_OPT as a way for storage engines to
store state from handler::check_for_upgrade().
Reviewed by: Debarun Banerjee
Problem was that REPLACE was using consistency check that started
TOI and we tried to rollback it.
Do not use wsrep_before_rollback and wsrep_after_rollback if
we are runing consistency check because no writeset keys are
in that case added. Do not allow consistency check usage
if table storage for target table is not InnoDB, instead
give warning. REPLACE|SELECT INTO ... SELECT will use
now TOI if table storage for target table is not InnoDB
to maintain consistency between galera nodes.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Since 0930eb86cb, system table creation
needed for spider init is delayed to the signal_ddl_recovery_done
callback. Since it is part of the init, failure should result in
spider deinit.
We also remove the call to spider_init_system_tables() from
spider_db_init(), as it was removed in the commit mentioned above and
accidentally restored in a merge.
use signal_ddl_recovery_done callback for that.
also make the server to call signal_ddl_recovery_done() when loading
plugins at run-time (so that plugins would't need to detect that
on their own)
calculate auto-inc value even if long duplicate check fails -
this is what the engine does for normal uniques.
auto-inc value is needed if it's a REPLACE
Problem:
=========
During commit, server calls prepare_commit_versioned to
determine the transaction modified system-versioned data.
Due to binlog_do_db option, we disable the binlog for the
statement. But prepare_commit_versioned() is being
called only when binlog is enabled for the statement.
Fix:
===
prepare_commit_versioned() should happen irrespective
of binlog state. So if the server has any read-write operation
then we should call prepare_commit_versioned().
