The issue was that there was that SHOW commands could open the table in the store engine, even in cases
where it should not be allowed to do that (ie, the storage engines meta data for that table was under big changes).
The cases where this should not be allowed are:
- ALTER TABLE DISABLE KEYS
- ALTER TABLE ENABLE KEYS
- REPAIR TABLE
- OPTIMIZE TABLE
- DROP TABLE
This patch adds a new mode, protected_against_usage(). If this is used then the SHOW command will wait until the table
is accessable. This is implemented by re-using the already exising 'version' flag for TABLE_SHARE.
It also added functions to be used to change TABLE_SHARE->version instead of changing it directly.
mysql-test/r/myisam-metadata.result:
Added test case
mysql-test/t/myisam-metadata.test:
Added test case
sql/mysqld.cc:
Start from refresh_version 2 as 0 and 1 are reserved.
sql/sql_admin.cc:
Added MYSQL_OPEN_FOR_REPAIR
Updated call to wait_while_table_is_used()
sql/sql_base.cc:
Updated call to wait_while_table_is_used()
- Allow one to specify how the table should be removed (for all commands except show or for all commands).
- Don't allow one to reopen the table if one has called share->protect_against_usage()
sql/sql_base.h:
Added TDC_RT_REMOVE_NOT_OWN_AND_MARK_NOT_USABLE, which is used to mark that no one can reopen this table, except with MYSQL_OPEN_FOR_REPAIR .
- Added MYSQL_OPEN_FOR_REPAIR
- Updated prototype for wait_while_table_is_used()
sql/sql_table.cc:
Updated call to wait_while_table_is_used()
Use MYSQL_OPEN_FOR_REPAIR for open tables that where repaired.
sql/sql_truncate.cc:
Updated call to wait_while_table_is_used()
sql/table.cc:
Use set_refresh_version()
sql/table.h:
Added functions to be used to change TABLE_SHARE->version instead of changing it directly
- Added --verbose to BUILD scripts to get make to write out compile commands.
- Detect if AM_EXTRA_MAKEFLAGS=VERBOSE=1 was used with build scripts.
- Don't write warnings about replication variables when doing bootstrap.
- Fixed that mysql_cond_wait() and mysql_cond_timedwait() will report original source file in case of errors.
- Ignore some compiler warnings
BUILD/FINISH.sh:
Detect if AM_EXTRA_MAKEFLAGS=VERBOSE=1 or --verbose was used
BUILD/SETUP.sh:
Added --verbose to print out the full compile lines
Updated help message
client/mysqltest.cc:
Fixed that one can use 'replace' with cat_file
cmake/configure.pl:
If --verbose is used, get make to write out compile commands
debian/dist/Debian/rules:
Added $AM_EXTRA_MAKEFLAGS to get VERBOSE=1 on buildbot builds
debian/dist/Ubuntu/rules:
Added $AM_EXTRA_MAKEFLAGS to get VERBOSE=1 on buildbot builds
include/my_pthread.h:
Made set_timespec_time_nsec() more portable.
include/mysql/psi/mysql_thread.h:
Fixed that mysql_cond_wait() and mysql_cond_timedwait() will report original source file in case of errors.
mysql-test/suite/innodb/r/auto_increment_dup.result:
Fixed wrong DBUG_SYNC
mysql-test/suite/innodb/t/auto_increment_dup.test:
Fixed wrong DBUG_SYNC
mysql-test/suite/perfschema/include/upgrade_check.inc:
Make test more portable for changes in *.sql files
mysql-test/suite/perfschema/r/pfs_upgrade.result:
Updated test results
mysql-test/valgrind.supp:
Ignore running Aria checkpoint thread
scripts/mysqlaccess.sh:
Changed reference of bugs database
Ensure that also client-server group is read.
sql/handler.cc:
Added missing syncpoint
sql/mysqld.cc:
Don't write warnings about replication variables when doing bootstrap
sql/mysqld.h:
Don't write warnings about replication variables when doing bootstrap
sql/rpl_rli.cc:
Don't write warnings about replication variables when doing bootstrap
sql/sql_insert.cc:
Don't mask SERVER_SHUTDOWN in insert_delayed
This is done to be able to distingush between shutdown and interrupt errors
support-files/compiler_warnings.supp:
Ignore some compiler warnings in xtradb,innobase, oqgraph, yassl, string3.h
Problem:If Disk becomes full while writing into the binlog,
then the server instance hangs till someone frees the space.
After user frees up the disk space, mysql server crashes
with an assert (m_status != DA_EMPTY)
Analysis: wait_for_free_space is being called in an
infinite loop i.e., server instance will hang until
someone frees up the space. So there is no need to
set status bit in diagnostic area.
Fix: Replace my_error/my_printf_error with
sql_print_warning() which prints the warning in error log.
include/my_sys.h:
Provision to call sql_print_warning from mysys files
mysys/errors.c:
Replace my_error/my_printf_error with
sql_print_warning() which prints the warning in error log.
mysys/my_error.c:
implementation of my_printf_warning
mysys/my_write.c:
Adding logic to break infinite loop in the simulation
sql/mysqld.cc:
Provision to call sql_print_warning from mysys files
Details of BUG#11746142: CALLING MYSQLD WHILE ANOTHER
INSTANCE IS RUNNING, REMOVES PID FILE
Fix: Before removing the pid file, ensure it was created
by the same process, leave it intact otherwise.
sql/mysqld.cc:
delete_pid_file() introduced, which checks that the pid file
belongs to the process before removing it
Analysis:
When thread cache is enabled, it does not properly initialize
thd->start_utime when a thread is picked from the thread cache.
This breaks the quota management mechanism.
THD::time_out_user_resource_limits() resets
m_user_connect->conn_per_hour to 0 based on thd->start_utime
Fix:
Initialize start_utime when cached thread is reused.
Notes:
Enabled back tests which were disabled because of this issue.
The patch decreases the duration of LOCK_thread_count, so it is not hold during THD destructor and freeing memory.
This mutex now only protects the integrity of threads list, when removing THD from it, and thread_count variable.
The add_to_status() function that updates global status during client disconnect, is now correctly protected by the LOCK_status mutex.
Benchmark : in a "non-persistent" sysbench test (oltp_ro with reconnect after each query), ~ 25% more connects/disconnects were measured
Analysis
---------
my_stat() calls stat() and if the stat() call fails we try to set
the variable my_errno which is actually a thread specific data .
We try to get the address of this thread specific data using
my_pthread_getspecifc(),but for the purge thread we have not defined
any thread specific data so it returns null and when dereferencing
null we get a segmentation fault.
init_available_charsets() seen in the core stack is invoked
through pthread_once() .pthread_once is used for one time
initialization.Since free_charsets() is called before innodb plugin
shutdown ,purge thread calls init_avaliable_charsets() which leads
to the crash.
Fix
---
Call free_charsets() after the innodb plugin shutdown,since purge
threads are still using the charsets.
Analysis
---------
my_stat() calls stat() and if the stat() call fails we try to set
the variable my_errno which is actually a thread specific data .
We try to get the address of this thread specific data using
my_pthread_getspecifc(),but for the purge thread we have not defined
any thread specific data so it returns null and when dereferencing
null we get a segmentation fault.
init_available_charsets() seen in the core stack is invoked
through pthread_once() .pthread_once is used for one time
initialization.Since free_charsets() is called before innodb plugin
shutdown ,purge thread calls init_avaliable_charsets() which leads
to the crash.
Fix
---
Call free_charsets() after the innodb plugin shutdown,since purge
threads are still using the charsets.
The feature was backported from MySQL 5.6.
Some code was added to make commands as
SELECT * FROM ignored_db.t1;
CALL ignored_db.proc();
USE ignored_db;
to take that option into account.
per-file comments:
mysql-test/r/ignore_db_dirs_basic.result
test result added.
mysql-test/t/ignore_db_dirs_basic-master.opt
options for the test,
actually the set of --ignore-db-dir lines.
mysql-test/t/ignore_db_dirs_basic.test
test for the feature.
Same test from 5.6 was taken as a basis,
then tests for SELECT, CALL etc were added.
per-file comments:
sql/mysql_priv.h
MDEV-495 backport --ignore-db-dir.
interface for db_name_is_in_ignore_list() added.
sql/mysqld.cc
MDEV-495 backport --ignore-db-dir.
--ignore-db-dir handling.
sql/set_var.cc
MDEV-495 backport --ignore-db-dir.
the @@ignore_db_dirs variable added.
sql/sql_show.cc
MDEV-495 backport --ignore-db-dir.
check if the directory is ignored.
sql/sql_show.h
MDEV-495 backport --ignore-db-dir.
interface added for opt_ignored_db_dirs.
sql/table.cc
MDEV-495 backport --ignore-db-dir.
check if the directory is ignored.
When a client connects to a MySQL server, first a THD object is created.
If there are any idle server threads waiting, the THD object is then added
to a list and a server thread is woken up. This thread then retrieves the
THD object from the list and starts executing.
The problem was that this list of THD objects waiting for a server thread,
was not working in a FIFO fashion, but rather LIFO. This is unfair, as it means
that the last THD added (=last client connected) will be assigned a server
thread first.
Note however that for this to be a problem, several clients must be able
to connect and have THD objects constructed before any server threads
manages to be woken up. This is not a very likely scenario.
This patch fixes the problem by changing the THD list to work FIFO
rather than LIFO.
This is the 5.1/5.5 version of the patch.
feature_dynamic_columns,feature_fulltext,feature_gis,feature_locale,feature_subquery,feature_timezone,feature_trigger,feature_xml
Opened_views, Executed_triggers, Executed_events
Added new process status 'updating status' as part of 'freeing items'
mysql-test/r/features.result:
Test of feature_xxx status variables
mysql-test/r/mysqld--help.result:
Removed duplicated 'language' variable.
mysql-test/r/view.result:
Test of opened_views
mysql-test/suite/rpl/t/rpl_start_stop_slave.test:
Write more information on failure
mysql-test/t/features.test:
Test of feature_xxx status variables
mysql-test/t/view.test:
Test of opened_views
sql/event_scheduler.cc:
Increment executed_events status variable
sql/field.cc:
Increment status variable
sql/item_func.cc:
Increment status variable
sql/item_strfunc.cc:
Increment status variable
sql/item_subselect.cc:
Increment status variable
sql/item_xmlfunc.cc:
Increment status variable
sql/mysqld.cc:
Add new status variables to 'show status'
sql/mysqld.h:
Added executed_events
sql/sql_base.cc:
Increment status variable
sql/sql_class.h:
Add new status variables
sql/sql_parse.cc:
Added new process status 'updating status' as part of 'freeing items'
sql/sql_trigger.cc:
Increment status variable
sql/sys_vars.cc:
Increment status variable
sql/tztime.cc:
Increment status variable
Simplify code
sql/derror.cc:
Better error message
sql/mysqld.cc:
Simplify usage of lc_messages_dir_ptr.
Don't give warnings that --log-bin should be used if --log-bin or --skip-log-bin is used.
The use of Thread_iterator did not work on windows (linking problems).
Solution: Change the interface between the thread_pool and the server
to only use simple free functions.
This patch is for 5.5 only (mimicks similar solution in 5.6)
two tests still fail:
main.innodb_icp and main.range_vs_index_merge_innodb
call records_in_range() with both range ends being open
(which triggers an assert)
SHOW 2012 INSTEAD OF 2011
* Added a new macro to hold the current year :
COPYRIGHT_NOTICE_CURRENT_YEAR
* Modified ORACLE_WELCOME_COPYRIGHT_NOTICE macro
to take the initial year as parameter and pick
current year from the above mentioned macro.
On localized Windows versions, Windows uses localized time zone names and contain non-ASCII characters. non-ASCII characters appear broken when displayed by clients
The fix is to declare system_time_zone variable to have UTF8 encoding and to convert tzname to UTF8.
The --debug-no-sync incorrectly defaulted to ON, disabling sync calls
by default which can loose data or cause corruption. Also, the code
used fsync() instead of the sometimes more efficient fdatasync().
Problem
========
SQL statements close to the size of max_allowed_packet produce binary
log events larger than max_allowed_packet.
The reason why this failure is occuring is because the event length is
more than the total size of the max_allowed_packet + max_event_header
length. Now since the event length exceeds this size master Dump
thread is unable to send the packet on to the slave.
That can happen e.g with row-based replication in Update_rows event.
Fix
====
The problem was fixed by increasing the max_allowed_packet for the
slave's threads (IO/SQL) by increasing it to 1GB.
This is done using the new server option included which is used to
regulate the max_allowed_packet of the slave thread (IO/SQL).
This causes the large packets to be received by the slave and apply
it successfully.
sql/log_event.h:
Added the new option in the log_event.h file.
sql/mysqld.cc:
Added a new option to the server.
sql/slave.cc:
Increasing the session max_allowed_packet to a large value ,
i.e. not taking global(max_allowed) into consideration, for the slave's threads.
