Added a SESSION-only system variable "wsrep_dirty_reads" to allow SELECT
queries to pass even when the node is not prepared to accept queries
(wsrep_ready=OFF). Added a test case.
The problem was that the maximum value of the transaction_prealloc_size
session system variable was ULONG_MAX which meant that it was possible
to cause the server to allocate excessive amounts of memory.
This patch fixes the problem by reducing the maxmimum value of
transaction_prealloc_size and transaction_alloc_block_size down
to 128K.
Note that transactions will still be able to allocate more than
128K if needed, this patch just reduces the amount that can be
preallocated - as well as the maximum size of the incremental
allocation blocks.
Added a SESSION-only system variable "wsrep_dirty_reads" to allow SELECT
queries to pass even when the node is not prepared to accept queries
(wsrep_ready=OFF). Added a test case.
log-tc-size is 24K by default. Page size is 64K on PPC64. But log-tc-size
must be at least 3 x page size. This is enforced by TC_LOG_MMAP::open()
with a comment: to guarantee non-empty pool.
This all makes server not startable in default configuration on PPC64.
Autosize log-tc-size, so that it's min value= page size * 3, default
value= page size * 6, block size= page size.
Implement a new mode for parallel replication. In this mode, all transactions
are optimistically attempted applied in parallel. In case of conflicts, the
offending transaction is rolled back and retried later non-parallel.
This is an early-release patch to facilitate testing, more changes to user
interface / options will be expected. The new mode is not enabled by default.
so that a simple query with one join would not have to call my_malloc.
- Allow lower limites for query_prealloc_size for testing.
- Fixed wrong initialization of trans_alloc_block_size
Do not allow server to start if binlog_format is set
to a format other than ROW. Also restrict the change
of GLOBAL/SESSION binlog_format value at runtime.
replace flag SHOW_VALUE_IN_HELP (that's not really an
independendent flag, as it should only be used for
NO_CMD_LINE sysvars) with a special getopt.id type.
* ignore the OPTIMIZER_SWITCH_ENGINE_CONDITION_PUSHDOWN bit
* issue a deprecation warning on 'engine_condition_pushdown=on'
* remove unused remains of the old pre-5.5 engine_condition_pushdown variable
Added MAX_STATEMENT_TIME user variable to automaticly kill queries after a given time limit has expired.
- Added timer functions based on pthread_cond_timedwait
- Added kill_handlerton() to signal storage engines about kill/timeout
- Added support for GRANT ... MAX_STATEMENT_TIME=#
- Copy max_statement_time to current user, if stored in mysql.user
- Added status variable max_statement_time_exceeded
- Added KILL_TIMEOUT
- Removed digest hash from performance schema tests as they change all the time.
- Updated test results that changed because of the new user variables or new fields in mysql.user
This functionallity is inspired by work done by Davi Arnaut at twitter.
Test case is copied from Davi's work.
Documentation can be found at
https://kb.askmonty.org/en/how-to-limittimeout-queries/
mysql-test/r/mysqld--help.result:
Updated for new help message
mysql-test/suite/perfschema/r/all_instances.result:
Added new mutex
mysql-test/suite/sys_vars/r/max_statement_time_basic.result:
Added testing of max_statement_time
mysql-test/suite/sys_vars/t/max_statement_time_basic.test:
Added testing of max_statement_time
mysql-test/t/max_statement_time.test:
Added testing of max_statement_time
mysys/CMakeLists.txt:
Added thr_timer
mysys/my_init.c:
mysys/mysys_priv.h:
Added new mutex and condition variables
Added new mutex and condition variables
mysys/thr_timer.c:
Added timer functions based on pthread_cond_timedwait()
This can be compiled with HAVE_TIMER_CREATE to benchmark agains timer_create()/timer_settime()
sql/lex.h:
Added MAX_STATEMENT_TIME
sql/log_event.cc:
Safety fix (timeout should be threated as an interrupted query)
sql/mysqld.cc:
Added support for timers
Added status variable max_statement_time_exceeded
sql/share/errmsg-utf8.txt:
Added ER_QUERY_TIMEOUT
sql/signal_handler.cc:
Added support for KILL_TIMEOUT
sql/sql_acl.cc:
Added support for GRANT ... MAX_STATEMENT_TIME=#
Copy max_statement_time to current user
sql/sql_class.cc:
Added timer functionality to THD.
Added thd_kill_timeout()
sql/sql_class.h:
Added timer functionality to THD.
Added KILL_TIMEOUT
Added max_statement_time variable in similar manner as long_query_time was done.
sql/sql_connect.cc:
Added handling of max_statement_time_exceeded
sql/sql_parse.cc:
Added starting and stopping timers for queries.
sql/sql_show.cc:
Added max_statement_time_exceeded for user/connects status in MariaDB 10.0
sql/sql_yacc.yy:
Added support for GRANT ... MAX_STATEMENT_TIME=# syntax, to be enabled in 10.0
sql/structs.h:
Added max_statement_time user resource
sql/sys_vars.cc:
Added max_statement_time variables
mysql-test/suite/roles/create_and_drop_role_invalid_user_table.test
Removed test as we require all fields in mysql.user table.
scripts/mysql_system_tables.sql
scripts/mysql_system_tables_data.sql
scripts/mysql_system_tables_fix.sql
Updated mysql.user with new max_statement_time field
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
Merged lp:maria/maria-10.0-galera up to revision 3880.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
Merged lp:maria/maria-10.0-galera up to revision 3879.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
* Added a basic test for wsrep_sync_wait system variable.
* Separate innodb_load_xa tests for wsrep and non-wsrep builds.
* Updated file_contents.test with correct file location
* Some coding style related changes.
mysqldump:
- Added --log-queries to allow one to disable logging for the dump
sql/log_event.cc:
- Removed setting of enable_slow_log as it's not required anymore.
sql/sql_parse.cc:
- Set enable_slow_log to value of thd->variables.sql_log_slow as this will speed up tests if slow log is disabled.
- opt_log_slow_admin_statements can now only disable slow log, not enable it.
sql/sql_explain.cc:
- Minor cleanup
Other things:
- Added sql_log_slow to system variables.
- Changed opt_slow_log to global_system_variables.sql_log_slow in all files
- Updated tests to reflect changes
