The issue was that there was that SHOW commands could open the table in the store engine, even in cases
where it should not be allowed to do that (ie, the storage engines meta data for that table was under big changes).
The cases where this should not be allowed are:
- ALTER TABLE DISABLE KEYS
- ALTER TABLE ENABLE KEYS
- REPAIR TABLE
- OPTIMIZE TABLE
- DROP TABLE
This patch adds a new mode, protected_against_usage(). If this is used then the SHOW command will wait until the table
is accessable. This is implemented by re-using the already exising 'version' flag for TABLE_SHARE.
It also added functions to be used to change TABLE_SHARE->version instead of changing it directly.
mysql-test/r/myisam-metadata.result:
Added test case
mysql-test/t/myisam-metadata.test:
Added test case
sql/mysqld.cc:
Start from refresh_version 2 as 0 and 1 are reserved.
sql/sql_admin.cc:
Added MYSQL_OPEN_FOR_REPAIR
Updated call to wait_while_table_is_used()
sql/sql_base.cc:
Updated call to wait_while_table_is_used()
- Allow one to specify how the table should be removed (for all commands except show or for all commands).
- Don't allow one to reopen the table if one has called share->protect_against_usage()
sql/sql_base.h:
Added TDC_RT_REMOVE_NOT_OWN_AND_MARK_NOT_USABLE, which is used to mark that no one can reopen this table, except with MYSQL_OPEN_FOR_REPAIR .
- Added MYSQL_OPEN_FOR_REPAIR
- Updated prototype for wait_while_table_is_used()
sql/sql_table.cc:
Updated call to wait_while_table_is_used()
Use MYSQL_OPEN_FOR_REPAIR for open tables that where repaired.
sql/sql_truncate.cc:
Updated call to wait_while_table_is_used()
sql/table.cc:
Use set_refresh_version()
sql/table.h:
Added functions to be used to change TABLE_SHARE->version instead of changing it directly
mysys/errors.c:
revert upstream's fix. use a much simpler one
mysys/my_write.c:
revert upstream's fix. use a simpler one
sql/item_xmlfunc.cc:
useless, but ok
sql/mysqld.cc:
simplify upstream's fix
storage/heap/hp_delete.c:
remove upstream's fix.
we'll use a much less expensive approach.
Currently, only TABLE_TYPE is tested, and if wrong or unspecified,
is replaced by the default value DOS.
- Test on type was moved from create to pre_create
- pre_create is now called unconditionally and must return true
on error and false otherwise.
- Warnings are produced if the table type was changed.
- The errors have specific error messages (instead of being warnings
with an error message telling that a table must have columns)
Modified:
ha_connect.cc
ha_connect.h
handler.h
sql_table.cc
DOWNGRADED FROM 5.6.11 TO 5.6.10
Problem was new syntax not accepted by previous version.
Fixed by adding version comment of /*!50531 around the
new syntax.
Like this in the .frm file:
'PARTITION BY KEY /*!50611 ALGORITHM = 2 */ () PARTITIONS 3'
and also changing the output from SHOW CREATE TABLE to:
CREATE TABLE t1 (a INT)
/*!50100 PARTITION BY KEY */ /*!50611 ALGORITHM = 1 */ /*!50100 ()
PARTITIONS 3 */
It will always add the ALGORITHM into the .frm for KEY [sub]partitioned
tables, but for SHOW CREATE TABLE it will only add it in case it is the non
default ALGORITHM = 1.
Also notice that for 5.5, it will say /*!50531 instead of /*!50611, which
will make upgrade from 5.5 > 5.5.31 to 5.6 < 5.6.11 fail!
If one downgrades an fixed version to the same major version (5.5 or 5.6) the
bug 14521864 will be visible again, but unless the .frm is updated, it will
work again when upgrading again.
Also fixed so that the .frm does not get updated version
if a single partition check passes.
DOWNGRADED FROM 5.6.11 TO 5.6.10
Problem was new syntax not accepted by previous version.
Fixed by adding version comment of /*!50531 around the
new syntax.
Like this in the .frm file:
'PARTITION BY KEY /*!50611 ALGORITHM = 2 */ () PARTITIONS 3'
and also changing the output from SHOW CREATE TABLE to:
CREATE TABLE t1 (a INT)
/*!50100 PARTITION BY KEY */ /*!50611 ALGORITHM = 1 */ /*!50100 ()
PARTITIONS 3 */
It will always add the ALGORITHM into the .frm for KEY [sub]partitioned
tables, but for SHOW CREATE TABLE it will only add it in case it is the non
default ALGORITHM = 1.
Also notice that for 5.5, it will say /*!50531 instead of /*!50611, which
will make upgrade from 5.5 > 5.5.31 to 5.6 < 5.6.11 fail!
If one downgrades an fixed version to the same major version (5.5 or 5.6) the
bug 14521864 will be visible again, but unless the .frm is updated, it will
work again when upgrading again.
Also fixed so that the .frm does not get updated version
if a single partition check passes.
Base code and idea from a patch from by plinux at Taobao.
The idea is that we mark all memory that are thread specific with MY_THREAD_SPECIFIC.
Memory counting is done per thread in the my_malloc_size_cb_func callback function from my_malloc().
There are plenty of new asserts to ensure that for a debug server the counting is correct.
Information_schema.processlist gets two new columns: MEMORY_USED and EXAMINED_ROWS.
- The later is there mainly to show how query is progressing.
The following changes in interfaces was needed to get this to work:
- init_alloc_root() amd init_sql_alloc() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- One now have to use alloc_root_set_min_malloc() to set min memory to be allocated by alloc_root()
- my_init_dynamic_array() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- my_net_init() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- Added flag for hash_init() so that one can mark hash table to be thread specific.
- Added flags to init_tree() so that one can mark tree to be thread specific.
- Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
- Added flag to Warning_info::Warning_info() if the structure should be fully initialized.
- String elements can now be marked as thread specific.
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Changed type of myf from int to ulong, as this is always a set of bit flags.
Other things:
- Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
- We now also show EXAMINED_ROWS in SHOW PROCESSLIST
- Added new variable 'memory_used'
- Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
- Removed calls to the obsoleted function init_dynamic_array()
- Use set_current_thd() instead of my_pthread_setspecific_ptr(THR_THD,...)
client/completion_hash.cc:
Updated call to init_alloc_root()
client/mysql.cc:
Updated call to init_alloc_root()
client/mysqlbinlog.cc:
init_dynamic_array() -> my_init_dynamic_array()
Updated call to init_alloc_root()
client/mysqlcheck.c:
Updated call to my_init_dynamic_array()
client/mysqldump.c:
Updated call to init_alloc_root()
client/mysqltest.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Fixed compiler warnings
extra/comp_err.c:
Updated call to my_init_dynamic_array()
extra/resolve_stack_dump.c:
Updated call to my_init_dynamic_array()
include/hash.h:
Added HASH_THREAD_SPECIFIC
include/heap.h:
Added flag is internal temporary table.
include/my_dir.h:
Safety fix: Ensure that MY_DONT_SORT and MY_WANT_STAT don't interfer with other mysys flags
include/my_global.h:
Changed type of myf from int to ulong, as this is always a set of bit flags.
include/my_sys.h:
Added MY_THREAD_SPECIFIC and MY_THREAD_MOVE
Added malloc_flags to DYNAMIC_ARRAY
Added extra mysys flag argument to my_init_dynamic_array()
Removed deprecated functions init_dynamic_array() and my_init_dynamic_array.._ci
Updated paramaters for init_alloc_root()
include/my_tree.h:
Added my_flags to allow one to use MY_THREAD_SPECIFIC with hash tables.
Removed with_delete. One should now instead use MY_TREE_WITH_DELETE_FLAG
Updated parameters to init_tree()
include/myisamchk.h:
Added malloc_flags to allow one to use MY_THREAD_SPECIFIC for checks.
include/mysql.h:
Added MYSQL_THREAD_SPECIFIC_MALLOC
Used 'unused1' to mark memory as thread specific.
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Used 'unused1' to mark memory as thread specific.
Updated parameters for my_net_init()
libmysql/libmysql.c:
Updated call to init_alloc_root() to mark memory thread specific.
libmysqld/emb_qcache.cc:
Updated call to init_alloc_root()
libmysqld/lib_sql.cc:
Updated call to init_alloc_root()
mysql-test/r/create.result:
Updated results
mysql-test/r/user_var.result:
Updated results
mysql-test/suite/funcs_1/datadict/processlist_priv.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/is_columns_is.result:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated results
mysql-test/t/show_explain.test:
Fixed usage of debug variable so that one can run test with --debug
mysql-test/t/user_var.test:
Added test of memory_usage variable.
mysys/array.c:
Added extra my_flags option to init_dynamic_array() and init_dynamic_array2() so that one can mark memory with MY_THREAD_SPECIFIC
All allocated memory is marked with the given my_flags.
Removed obsolete function init_dynamic_array()
mysys/default.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
mysys/hash.c:
Updated call to my_init_dynamic_array_ci().
Allocated memory is marked with MY_THREAD_SPECIFIC if HASH_THREAD_SPECIFIC is used.
mysys/ma_dyncol.c:
init_dynamic_array() -> my_init_dynamic_array()
Added #if to get rid of compiler warnings
mysys/mf_tempdir.c:
Updated call to my_init_dynamic_array()
mysys/my_alloc.c:
Added extra parameter to init_alloc_root() so that one can mark memory with MY_THREAD_SPECIFIC
Extend MEM_ROOT with a flag if memory is thread specific.
This is stored in block_size, to keep the size of the MEM_ROOT object identical as before.
Allocated memory is marked with MY_THREAD_SPECIFIC if used with init_alloc_root()
mysys/my_chmod.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_chsize.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_copy.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_create.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_delete.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_error.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fopen.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fstream.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_getwd.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_lib.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Updated DBUG_PRINT because of change of myf type
mysys/my_lock.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_malloc.c:
Store at start of each allocated memory block the size of the block and if the block is thread specific.
Call malloc_size_cb_func, if set, with the memory allocated/freed.
Updated DBUG_PRINT because of change of myf type
mysys/my_open.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_pread.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_read.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_redel.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_rename.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_seek.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_sync.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_thr_init.c:
Ensure that one can call my_thread_dbug_id() even if thread is not properly initialized.
mysys/my_write.c:
Updated DBUG_PRINT because of change of myf type
mysys/mysys_priv.h:
Updated parameters to sf_malloc and sf_realloc()
mysys/safemalloc.c:
Added checking that for memory marked with MY_THREAD_SPECIFIC that it's the same thread that is allocation and freeing the memory.
Added sf_malloc_dbug_id() to allow MariaDB to specify which THD is handling the memory.
Added my_flags arguments to sf_malloc() and sf_realloc() to be able to mark memory with MY_THREAD_SPECIFIC.
Added sf_report_leaked_memory() to get list of memory not freed by a thread.
mysys/tree.c:
Added flags to init_tree() so that one can mark tree to be thread specific.
Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
Updated call to init_alloc_root()
All allocated memory is marked with the given malloc flags
mysys/waiting_threads.c:
Updated call to my_init_dynamic_array()
sql-common/client.c:
Updated call to init_alloc_root() and my_net_init() to mark memory thread specific.
Updated call to my_init_dynamic_array().
Added MYSQL_THREAD_SPECIFIC_MALLOC so that client can mark memory as MY_THREAD_SPECIFIC.
sql-common/client_plugin.c:
Updated call to init_alloc_root()
sql/debug_sync.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/event_scheduler.cc:
Removed calls to net_end() as this is now done in ~THD()
Call set_current_thd() to ensure that memory is assigned to right thread.
sql/events.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/filesort.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/filesort_utils.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/ha_ndbcluster.cc:
Updated call to init_alloc_root()
Updated call to my_net_init()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_ndbcluster_binlog.cc:
Updated call to my_net_init()
Updated call to init_sql_alloc()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_partition.cc:
Updated call to init_alloc_root()
sql/handler.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
Added missing call to my_dir_end()
sql/item_func.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_subselect.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_sum.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/log.cc:
More DBUG
Updated call to init_alloc_root()
sql/mdl.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/mysqld.cc:
Added total_memory_used
Updated call to init_alloc_root()
Move mysql_cond_broadcast() before my_thread_end()
Added mariadb_dbug_id() to count memory per THD instead of per thread.
Added my_malloc_size_cb_func() callback function for my_malloc() to count memory.
Move initialization of mysqld_server_started and mysqld_server_initialized earlier.
Updated call to my_init_dynamic_array().
Updated call to my_net_init().
Call my_pthread_setspecific_ptr(THR_THD,...) to ensure that memory is assigned to right thread.
Added status variable 'memory_used'.
Updated call to init_alloc_root()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/mysqld.h:
Added set_current_thd()
sql/net_serv.cc:
Added new parameter to my_net_init() so that one can mark memory with MY_THREAD_SPECIFIC.
Store in net->thread_specific_malloc if memory is thread specific.
Mark memory to be thread specific if requested.
sql/opt_range.cc:
Updated call to my_init_dynamic_array()
Updated call to init_sql_alloc()
Added MY_THREAD_SPECIFIC to allocated memory.
sql/opt_subselect.cc:
Updated call to init_sql_alloc() to mark memory thread specific.
sql/protocol.cc:
Fixed compiler warning
sql/records.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/rpl_filter.cc:
Updated call to my_init_dynamic_array()
sql/rpl_handler.cc:
Updated call to my_init_dynamic_array2()
sql/rpl_handler.h:
Updated call to init_sql_alloc()
sql/rpl_mi.cc:
Updated call to my_init_dynamic_array()
sql/rpl_tblmap.cc:
Updated call to init_alloc_root()
sql/rpl_utility.cc:
Updated call to my_init_dynamic_array()
sql/slave.cc:
Initialize things properly before calling functions that allocate memory.
Removed calls to net_end() as this is now done in ~THD()
sql/sp_head.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
Added parameter to warning_info() that it should be fully initialized.
sql/sp_pcontext.cc:
Updated call to my_init_dynamic_array()
sql/sql_acl.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_admin.cc:
Added parameter to warning_info() that it should be fully initialized.
sql/sql_analyse.h:
Updated call to init_tree() to mark memory thread specific.
sql/sql_array.h:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_audit.cc:
Updated call to my_init_dynamic_array()
sql/sql_base.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_cache.cc:
Updated comment
sql/sql_class.cc:
Added parameter to warning_info() that not initialize it until THD is fully created.
Updated call to init_sql_alloc()
Mark THD::user_vars has to be thread specific.
Updated call to my_init_dynamic_array()
Ensure that memory allocated by THD is assigned to the THD.
More DBUG
Always acll net_end() in ~THD()
Assert that all memory signed to this THD is really deleted at ~THD.
Fixed set_status_var_init() to not reset memory_used.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_class.h:
Added MY_THREAD_SPECIFIC to allocated memory.
Added malloc_size to THD to record allocated memory per THD.
sql/sql_delete.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_error.cc:
Added 'initialize' parameter to Warning_info() to say if should allocate memory for it's structures.
This is used by THD::THD() to not allocate memory until THD is ready.
Added Warning_info::free_memory()
sql/sql_error.h:
Updated Warning_info() class.
sql/sql_handler.cc:
Updated call to init_alloc_root() to mark memory thread specific.
sql/sql_insert.cc:
More DBUG
sql/sql_join_cache.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_lex.cc:
Updated call to my_init_dynamic_array()
sql/sql_lex.h:
Updated call to my_init_dynamic_array()
sql/sql_load.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_parse.cc:
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
Ensure that examined_row_count() is reset before query.
Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Don't restore thd->status_var.memory_used when restoring thd->status_var
sql/sql_plugin.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Don't allocate THD on the stack, as this causes problems with valgrind when doing thd memory counting.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_prepare.cc:
Added parameter to warning_info() that it should be fully initialized.
Updated call to init_sql_alloc() to mark memory thread specific.
sql/sql_reload.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_select.cc:
Updated call to my_init_dynamic_array() and init_sql_alloc() to mark memory thread specific.
Added MY_THREAD_SPECIFIC to allocated memory.
More DBUG
sql/sql_servers.cc:
Updated call to init_sql_alloc() to mark memory some memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_show.cc:
Updated call to my_init_dynamic_array()
Mark my_dir() memory thread specific.
Use my_pthread_setspecific_ptr(THR_THD,...) to mark that allocated memory should be allocated to calling thread.
More DBUG.
Added malloc_size and examined_row_count to SHOW PROCESSLIST.
Added MY_THREAD_SPECIFIC to allocated memory.
Updated call to init_sql_alloc()
Added parameter to warning_info() that it should be fully initialized.
sql/sql_statistics.cc:
Fixed compiler warning
sql/sql_string.cc:
String elements can now be marked as thread specific.
sql/sql_string.h:
String elements can now be marked as thread specific.
sql/sql_table.cc:
Updated call to init_sql_alloc() and my_malloc() to mark memory thread specific
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Fixed compiler warning
sql/sql_test.cc:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_trigger.cc:
Updated call to init_sql_alloc()
sql/sql_udf.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_update.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/table.cc:
Updated call to init_sql_alloc().
Mark memory used by temporary tables, that are not for slave threads, as MY_THREAD_SPECIFIC
Updated call to init_sql_alloc()
sql/thr_malloc.cc:
Added my_flags argument to init_sql_alloc() to be able to mark memory as MY_THREAD_SPECIFIC.
sql/thr_malloc.h:
Updated prototype for init_sql_alloc()
sql/tztime.cc:
Updated call to init_sql_alloc()
Updated call to init_alloc_root() to mark memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/uniques.cc:
Updated calls to init_tree(), my_init_dynamic_array() and my_malloc() to mark memory thread specific.
sql/unireg.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/csv/ha_tina.cc:
Updated call to init_alloc_root()
storage/federated/ha_federated.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Ensure that memory allocated by fedarated is registered for the system, not for the thread.
storage/federatedx/federatedx_io_mysql.cc:
Updated call to my_init_dynamic_array()
storage/federatedx/ha_federatedx.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
storage/heap/ha_heap.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/heap/heapdef.h:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_block.c:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_create.c:
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Use MY_TREE_WITH_DELETE instead of removed option 'with_delete'.
storage/heap/hp_open.c:
Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
storage/heap/hp_write.c:
Added new parameter to hp_get_new_block()
storage/maria/ma_bitmap.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_blockrec.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_check.c:
Updated call to init_alloc_root()
storage/maria/ma_ft_boolean_search.c:
Updated calls to init_tree() and init_alloc_root()
storage/maria/ma_ft_nlq_search.c:
Updated call to init_tree()
storage/maria/ma_ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/maria/ma_loghandler.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_open.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_sort.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_write.c:
Updated calls to my_init_dynamic_array() and init_tree()
storage/maria/maria_pack.c:
Updated call to init_tree()
storage/maria/unittest/sequence_storage.c:
Updated call to my_init_dynamic_array()
storage/myisam/ft_boolean_search.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_nlq_search.c:
Updated call to init_tree()
storage/myisam/ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_stopwords.c:
Updated call to init_tree()
storage/myisam/mi_check.c:
Updated call to init_alloc_root()
storage/myisam/mi_write.c:
Updated call to my_init_dynamic_array()
Updated call to init_tree()
storage/myisam/myisamlog.c:
Updated call to init_tree()
storage/myisam/myisampack.c:
Updated call to init_tree()
storage/myisam/sort.c:
Updated call to my_init_dynamic_array()
storage/myisammrg/ha_myisammrg.cc:
Updated call to init_sql_alloc()
storage/perfschema/pfs_check.cc:
Rest current_thd
storage/perfschema/pfs_instr.cc:
Removed DBUG_ENTER/DBUG_VOID_RETURN as at this point my_thread_var is not allocated anymore, which can cause problems.
support-files/compiler_warnings.supp:
Disable compiler warning from offsetof macro.
pre_create function and one is now able to create table
without giving the column specifications for tables of types:
DBF, ODBC, MYSQL, CSV, and WMI (on Windows)
modified:
sql/handler.h
sql/sql_table.cc
storage/connect/ha_connect.cc
storage/connect/ha_connect.h
storage/connect/mycat.cc
storage/connect/odbconn.cpp
storage/connect/plgcnx.h
storage/connect/tabfmt.cpp
storage/connect/tabmysql.cpp
storage/connect/tabwmi.cpp
The patch lifts the limitation of the current implementation
of ALTER TABLE that does not allow to build unique/primary
indexes by sort for MyISAM and Aria engines.
that introduced engine independent persistent statistics.
In particular:
- added an enumeration type for possible values of the system
variable use_stat_tables
- renamed KEY::real_rec_per_key to KEY::actual_rec_per_key
- optimized the collection of statistical data for any primary
key defined only on one column.
engine-independent statistics.
When the primary key was dropped or changed statistics on secondary
indexes for the prefixes that included components of the primary
key was not removed from the table mysql.index_stats.
Also fixed: in the some cases when a column was changed statistics
on the indexes that included this column was not removed from the
table mysql.index_stats.
Also disabled the test mdev-504 for --ps-protocol.
mysql-test/r/create.result:
Updated test results
mysql-test/t/create.test:
Updated test
sql/sql_base.cc:
Use push_internal_handler/pop_internal_handler to avoid errors & warnings instead of clear_error
Give a warnings instead of an error for CREATE TABLE IF EXISTS
sql/sql_parse.cc:
Check if we failed because of table exists (can only happen from create)
sql/sql_table.cc:
Check if we failed because of table exists (can only happen from create)
If triggers are used for an insert/update/delete statement than the values of
all virtual columns must be computed as any of them may be used by the triggers.
PROBLEM
-------
optimize on partiton will recreate the whole table
instead of just partition.
ANALYSIS
--------
At present innodb doesn't support optimize option ,so we do a rebuild of the
whole table and then call analyze() on the table.Presently for any optimize()
option (on table or partition) we display the following info to the user
"Table does not support optimize, doing recreate + analyze instead".
FIX
---
It was decided for GA versions(5.1 and 5.5) whenever the user tries to
optimize a partition(s) we will will display the following info the user
"Table does not support optimize on partitions.
All partitions will be rebuilt and analyzed."
Earlier partitions were not analyzed.Now all partitions will be analyzed.
If the user wants to optimize the whole table ,we will display the
previous info to the user. i.e
"Table does not support optimize, doing recreate + analyze instead"
For 5.6+ versions we will raise a new bug to support optimize() options
in innodb.
PROBLEM
-------
optimize on partiton will recreate the whole table
instead of just partition.
ANALYSIS
--------
At present innodb doesn't support optimize option ,so we do a rebuild of the
whole table and then call analyze() on the table.Presently for any optimize()
option (on table or partition) we display the following info to the user
"Table does not support optimize, doing recreate + analyze instead".
FIX
---
It was decided for GA versions(5.1 and 5.5) whenever the user tries to
optimize a partition(s) we will will display the following info the user
"Table does not support optimize on partitions.
All partitions will be rebuilt and analyzed."
Earlier partitions were not analyzed.Now all partitions will be analyzed.
If the user wants to optimize the whole table ,we will display the
previous info to the user. i.e
"Table does not support optimize, doing recreate + analyze instead"
For 5.6+ versions we will raise a new bug to support optimize() options
in innodb.
FAILED IN DEACTIVATE_DDL_LOG_ENTRY
deallocate_ddl_log_entry() can be called without having
locked LOCK_gdl. It uses a global buffer for reading and
writing entries in the ddl_log, and since it is not protected
by any mutex, two concurrent threads can overwrite the
content in the global buffer, so it can be different from
what was read.
Thread a reads from entry 1 into global
buffer, thread b reads from entry 2 into global buffer,
thread a writes from global buffer into entry 1
-> entry 1 is not the content of entry 2.
This is especially bad for replace entries, which uses
two phases, and does not deactivate the whole entry
after the first phase, but increases the phase instead.
Fixed by using thread local storage (stack) instead of global
storage (global buffer).
Also added buffer and size arguments to
read/write_ddl_log_file_entry.
Also only read/write first bytes in entries in
deactivate_ddl_log_entry.
Also fixed the scenario where it will try to recover from a server
compiled with a different value of IO_SIZE (very uncommon!)
updated patch with set_ddl_log_entry_from_buf
and removed read_ddl_log_entry.
Manually tested, no test case included.
FAILED IN DEACTIVATE_DDL_LOG_ENTRY
deallocate_ddl_log_entry() can be called without having
locked LOCK_gdl. It uses a global buffer for reading and
writing entries in the ddl_log, and since it is not protected
by any mutex, two concurrent threads can overwrite the
content in the global buffer, so it can be different from
what was read.
Thread a reads from entry 1 into global
buffer, thread b reads from entry 2 into global buffer,
thread a writes from global buffer into entry 1
-> entry 1 is not the content of entry 2.
This is especially bad for replace entries, which uses
two phases, and does not deactivate the whole entry
after the first phase, but increases the phase instead.
Fixed by using thread local storage (stack) instead of global
storage (global buffer).
Also added buffer and size arguments to
read/write_ddl_log_file_entry.
Also only read/write first bytes in entries in
deactivate_ddl_log_entry.
Also fixed the scenario where it will try to recover from a server
compiled with a different value of IO_SIZE (very uncommon!)
updated patch with set_ddl_log_entry_from_buf
and removed read_ddl_log_entry.
Manually tested, no test case included.
Generalized support for auto-updated and/or auto-initialized timestamp
and datetime columns. This patch is a reimplementation of MySQL's
"WL#5874: CURRENT_TIMESTAMP as DEFAULT for DATETIME columns". In order to
ease future merges, this implementation reused few function and variable
names from MySQL's patch, however the implementation is quite different.
TODO:
The only unresolved problem in this patch is the semantics of LOAD DATA for
TIMESTAMP and DATETIME columns in the cases when there are missing or NULL
columns. I couldn't fully comprehend the logic behind MySQL's behavior and
its relationship with their own documentation, so I left the results to be
more consistent with all other LOAD cases.
The problematic test cases can be seen by running the test file function_defaults,
and observing the test case differences. Those were left on purpose for discussion.
and small collateral changes
mysql-test/lib/My/Test.pm:
somehow with "print" we get truncated writes sometimes
mysql-test/suite/perfschema/r/digest_table_full.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/dml_handler.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/information_schema.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/nesting.result:
this differs, because we don't rewrite general log queries, and multi-statement
packets are logged as a one entry. this result file is identical to what mysql-5.6.5
produces with the --log-raw option.
mysql-test/suite/perfschema/r/relaylog.result:
MariaDB modifies the binlog index file directly, while MySQL 5.6 has a feature "crash-safe binlog index" and modifies a special "crash-safe" shadow copy of the index file and then moves it over. That's why this test shows "NONE" index file writes in MySQL and "MANY" in MariaDB.
mysql-test/suite/perfschema/r/server_init.result:
MariaDB initializes the "manager" resources from the "manager" thread, and starts this thread only when --flush-time is not 0. MySQL 5.6 initializes "manager" resources unconditionally on server startup.
mysql-test/suite/perfschema/r/stage_mdl_global.result:
this differs, because MariaDB disables query cache when query_cache_size=0. MySQL does not
do that, and this causes useless mutex locks and waits.
mysql-test/suite/perfschema/r/statement_digest.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_consumers.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_long_query.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/rpl/r/rpl_mixed_drop_create_temp_table.result:
will be updated to match 5.6 when alfranio.correia@oracle.com-20110512172919-c1b5kmum4h52g0ni and anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y are merged
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
will be updated to match 5.6 when anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y is merged
