Withing this task the following changes were made:
- Added sending of metadata info in prepare phase for the admin related
command (check table, checksum table, repair, optimize, analyze).
- Refactored implmentation of HELP command to support its execution in
PS mode
- Added support for execution of LOAD INTO and XA- related statements
in PS mode
- Modified mysqltest.cc to run statements in PS mode unconditionally
in case the option --ps-protocol is set. Formerly, only those statements
were executed using PS protocol that matched the hard-coded regular expression
- Fixed the following issues:
The statement
explain select (select 2)
executed in regular and PS mode produces different results:
MariaDB [test]> prepare stmt from "explain select (select 2)";
Query OK, 0 rows affected (0,000 sec)
Statement prepared
MariaDB [test]> execute stmt;
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| 1 | PRIMARY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | No tables used |
| 2 | SUBQUERY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | No tables used |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
2 rows in set (0,000 sec)
MariaDB [test]> explain select (select 2);
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| 1 | SIMPLE | NULL | NULL | NULL | NULL | NULL | NULL | NULL | No tables used |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
1 row in set, 1 warning (0,000 sec)
In case the statement
CREATE TABLE t1 SELECT * FROM (SELECT 1 AS a, (SELECT a+0)) a
is run in PS mode it fails with the error
ERROR 1054 (42S22): Unknown column 'a' in 'field list'.
- Uniform handling of read-only variables both in case the SET var=val
statement is executed as regular or prepared statememt.
- Fixed assertion firing on handling LOAD DATA statement for temporary tables
- Relaxed assert condition in the function lex_end_stage1() by adding
the commands SQLCOM_ALTER_EVENT, SQLCOM_CREATE_PACKAGE,
SQLCOM_CREATE_PACKAGE_BODY to a list of supported command
- Removed raising of the error ER_UNSUPPORTED_PS in the function
check_prepared_statement() for the ALTER VIEW command
- Added initialization of the data memember st_select_lex_unit::last_procedure
(assign NULL value) in the constructor
Without this change the test case main.ctype_utf8 fails with the following
report in case it is run with the optoin --ps-protocol.
mysqltest: At line 2278: query 'VALUES (_latin1 0xDF) UNION VALUES(_utf8'a' COLLATE utf8_bin)' failed: 2013: Lost connection
- The following bug reports were fixed:
MDEV-24460: Multiple rows result set returned from stored
routine over prepared statement binary protocol is
handled incorrectly
CONC-519: mariadb client library doesn't handle server_status and
warnign_count fields received in the packet
COM_STMT_EXECUTE_RESPONSE.
Reasons for these bug reports have the same nature and caused by
missing loop iteration on results sent by server in response to
COM_STMT_EXECUTE packet.
Enclosing of statements for processing of COM_STMT_EXECUTE response
in the construct like
do
{
...
} while (!mysql_stmt_next_result());
fixes the above mentioned bug reports.
also avoid an oxymoron of using `MYSQL_PLUGIN_IMPORT` under
`#ifdef MYSQL_SERVER`, and empty_clex_str is so trivial that a plugin
can define it if needed.
In the code existed just before this patch binding of a table reference to
the specification of the corresponding CTE happens in the function
open_and_process_table(). If the table reference is not the first in the
query the specification is cloned in the same way as the specification of
a view is cloned for any reference of the view. This works fine for
standalone queries, but does not work for stored procedures / functions
for the following reason.
When the first call of a stored procedure/ function SP is processed the
body of SP is parsed. When a query of SP is parsed the info on each
encountered table reference is put into a TABLE_LIST object linked into
a global chain associated with the query. When parsing of the query is
finished the basic info on the table references from this chain except
table references to derived tables and information schema tables is put
in one hash table associated with SP. When parsing of the body of SP is
finished this hash table is used to construct TABLE_LIST objects for all
table references mentioned in SP and link them into the list of such
objects passed to a pre-locking process that calls open_and_process_table()
for each table from the list.
When a TABLE_LIST for a view is encountered the view is opened and its
specification is parsed. For any table reference occurred in
the specification a new TABLE_LIST object is created to be included into
the list for pre-locking. After all objects in the pre-locking have been
looked through the tables mentioned in the list are locked. Note that the
objects referenced CTEs are just skipped here as it is impossible to
resolve these references without any info on the context where they occur.
Now the statements from the body of SP are executed one by one that.
At the very beginning of the execution of a query the tables used in the
query are opened and open_and_process_table() now is called for each table
reference mentioned in the list of TABLE_LIST objects associated with the
query that was built when the query was parsed.
For each table reference first the reference is checked against CTEs
definitions in whose scope it occurred. If such definition is found the
reference is considered resolved and if this is not the first reference
to the found CTE the the specification of the CTE is re-parsed and the
result of the parsing is added to the parsing tree of the query as a
sub-tree. If this sub-tree contains table references to other tables they
are added to the list of TABLE_LIST objects associated with the query in
order the referenced tables to be opened. When the procedure that opens
the tables comes to the TABLE_LIST object created for a non-first
reference to a CTE it discovers that the referenced table instance is not
locked and reports an error.
Thus processing non-first table references to a CTE similar to how
references to view are processed does not work for queries used in stored
procedures / functions. And the main problem is that the current
pre-locking mechanism employed for stored procedures / functions does not
allow to save the context in which a CTE reference occur. It's not trivial
to save the info about the context where a CTE reference occurs while the
resolution of the table reference cannot be done without this context and
consequentially the specification for the table reference cannot be
determined.
This patch solves the above problem by moving resolution of all CTE
references at the parsing stage. More exactly references to CTEs occurred in
a query are resolved right after parsing of the query has finished. After
resolution any CTE reference it is marked as a reference to to derived
table. So it is excluded from the hash table created for pre-locking used
base tables and view when the first call of a stored procedure / function
is processed.
This solution required recursive calls of the parser. The function
THD::sql_parser() has been added specifically for recursive invocations of
the parser.
# Conflicts:
# sql/sql_cte.cc
# sql/sql_cte.h
# sql/sql_lex.cc
# sql/sql_lex.h
# sql/sql_view.cc
# sql/sql_yacc.yy
# sql/sql_yacc_ora.yy
In the code existed just before this patch binding of a table reference to
the specification of the corresponding CTE happens in the function
open_and_process_table(). If the table reference is not the first in the
query the specification is cloned in the same way as the specification of
a view is cloned for any reference of the view. This works fine for
standalone queries, but does not work for stored procedures / functions
for the following reason.
When the first call of a stored procedure/ function SP is processed the
body of SP is parsed. When a query of SP is parsed the info on each
encountered table reference is put into a TABLE_LIST object linked into
a global chain associated with the query. When parsing of the query is
finished the basic info on the table references from this chain except
table references to derived tables and information schema tables is put
in one hash table associated with SP. When parsing of the body of SP is
finished this hash table is used to construct TABLE_LIST objects for all
table references mentioned in SP and link them into the list of such
objects passed to a pre-locking process that calls open_and_process_table()
for each table from the list.
When a TABLE_LIST for a view is encountered the view is opened and its
specification is parsed. For any table reference occurred in
the specification a new TABLE_LIST object is created to be included into
the list for pre-locking. After all objects in the pre-locking have been
looked through the tables mentioned in the list are locked. Note that the
objects referenced CTEs are just skipped here as it is impossible to
resolve these references without any info on the context where they occur.
Now the statements from the body of SP are executed one by one that.
At the very beginning of the execution of a query the tables used in the
query are opened and open_and_process_table() now is called for each table
reference mentioned in the list of TABLE_LIST objects associated with the
query that was built when the query was parsed.
For each table reference first the reference is checked against CTEs
definitions in whose scope it occurred. If such definition is found the
reference is considered resolved and if this is not the first reference
to the found CTE the the specification of the CTE is re-parsed and the
result of the parsing is added to the parsing tree of the query as a
sub-tree. If this sub-tree contains table references to other tables they
are added to the list of TABLE_LIST objects associated with the query in
order the referenced tables to be opened. When the procedure that opens
the tables comes to the TABLE_LIST object created for a non-first
reference to a CTE it discovers that the referenced table instance is not
locked and reports an error.
Thus processing non-first table references to a CTE similar to how
references to view are processed does not work for queries used in stored
procedures / functions. And the main problem is that the current
pre-locking mechanism employed for stored procedures / functions does not
allow to save the context in which a CTE reference occur. It's not trivial
to save the info about the context where a CTE reference occurs while the
resolution of the table reference cannot be done without this context and
consequentially the specification for the table reference cannot be
determined.
This patch solves the above problem by moving resolution of all CTE
references at the parsing stage. More exactly references to CTEs occurred in
a query are resolved right after parsing of the query has finished. After
resolution any CTE reference it is marked as a reference to to derived
table. So it is excluded from the hash table created for pre-locking used
base tables and view when the first call of a stored procedure / function
is processed.
This solution required recursive calls of the parser. The function
THD::sql_parser() has been added specifically for recursive invocations of
the parser.
In the code existed just before this patch binding of a table reference to
the specification of the corresponding CTE happens in the function
open_and_process_table(). If the table reference is not the first in the
query the specification is cloned in the same way as the specification of
a view is cloned for any reference of the view. This works fine for
standalone queries, but does not work for stored procedures / functions
for the following reason.
When the first call of a stored procedure/ function SP is processed the
body of SP is parsed. When a query of SP is parsed the info on each
encountered table reference is put into a TABLE_LIST object linked into
a global chain associated with the query. When parsing of the query is
finished the basic info on the table references from this chain except
table references to derived tables and information schema tables is put
in one hash table associated with SP. When parsing of the body of SP is
finished this hash table is used to construct TABLE_LIST objects for all
table references mentioned in SP and link them into the list of such
objects passed to a pre-locking process that calls open_and_process_table()
for each table from the list.
When a TABLE_LIST for a view is encountered the view is opened and its
specification is parsed. For any table reference occurred in
the specification a new TABLE_LIST object is created to be included into
the list for pre-locking. After all objects in the pre-locking have been
looked through the tables mentioned in the list are locked. Note that the
objects referenced CTEs are just skipped here as it is impossible to
resolve these references without any info on the context where they occur.
Now the statements from the body of SP are executed one by one that.
At the very beginning of the execution of a query the tables used in the
query are opened and open_and_process_table() now is called for each table
reference mentioned in the list of TABLE_LIST objects associated with the
query that was built when the query was parsed.
For each table reference first the reference is checked against CTEs
definitions in whose scope it occurred. If such definition is found the
reference is considered resolved and if this is not the first reference
to the found CTE the the specification of the CTE is re-parsed and the
result of the parsing is added to the parsing tree of the query as a
sub-tree. If this sub-tree contains table references to other tables they
are added to the list of TABLE_LIST objects associated with the query in
order the referenced tables to be opened. When the procedure that opens
the tables comes to the TABLE_LIST object created for a non-first
reference to a CTE it discovers that the referenced table instance is not
locked and reports an error.
Thus processing non-first table references to a CTE similar to how
references to view are processed does not work for queries used in stored
procedures / functions. And the main problem is that the current
pre-locking mechanism employed for stored procedures / functions does not
allow to save the context in which a CTE reference occur. It's not trivial
to save the info about the context where a CTE reference occurs while the
resolution of the table reference cannot be done without this context and
consequentially the specification for the table reference cannot be
determined.
This patch solves the above problem by moving resolution of all CTE
references at the parsing stage. More exactly references to CTEs occurred in
a query are resolved right after parsing of the query has finished. After
resolution any CTE reference it is marked as a reference to to derived
table. So it is excluded from the hash table created for pre-locking used
base tables and view when the first call of a stored procedure / function
is processed.
This solution required recursive calls of the parser. The function
THD::sql_parser() has been added specifically for recursive invocations of
the parser.
DROP TABLE opens all temporary tables at start, but then
uses find_temporary_table() to check if a table is temporary
instead of is_temporary_table() which is much faster.
This patch fixes this issue.
This change removed 68 explict strlen() calls from the code.
The following renames was done to ensure we don't use the old names
when merging code from earlier releases, as using the new variables
for print function could result in crashes:
- charset->csname renamed to charset->cs_name
- charset->name renamed to charset->coll_name
Almost everything where mechanical changes except:
- Changed to use the new Protocol::store(LEX_CSTRING..) when possible
- Changed to use field->store(LEX_CSTRING*, CHARSET_INFO*) when possible
- Changed to use String->append(LEX_CSTRING&) when possible
Other things:
- There where compiler issues with ensuring that all character set names
points to the same string: gcc doesn't allow one to use integer constants
when defining global structures (constant char * pointers works fine).
To get around this, I declared defines for each character set name
length.
This patch changes the main name of 3 byte character set from utf8 to
utf8mb3. New old_mode UTF8_IS_UTF8MB3 is added and set TRUE by default,
so that utf8 would mean utf8mb3. If not set, utf8 would mean utf8mb4.
Added DDL logging to applier and replaying also so that
DDL is logged on other than originating node.
wsrep.h
Removed wsrep_thd_is_local conditions and cleaned up
the macros. Removed WSREP_TO_ISOLATION_END.
Event_job_data::execute
change_password
acl_set_default_role
mysql_execute_command
Replaced macro by function call
wsrep_to_isolation_begin
wsrep_to_isolation_end
If execution is not local log DDL-information when
wsrep_debug is enabled
No new tests required as current regression setting is
already testing these code paths.
The function was originally introduced by eb0804ef5e7eeb059bb193c3c6787e8a4188d34d
MDEV-18553: MDEV-16327 pre-requisits part 1: isolation of LIMIT/OFFSET handling
set_unlimited had an overloaded notion of both clearing the offset value
and the limit value. The code is used for SQL_CALC_ROWS option to
disable the limit clause after the limit is reached, while at the same
time the calling code suppreses sending of rows.
Proposed solution:
Dedicated clear method for query initialization (to ensure no garbage
remains between executions).
Dedicated set_unlimited that only alters the limit value.
Replace
* select_lex::offset_limit
* select_lex::select_limit
* select_lex::explicit_limit
with select_lex::Lex_select_limit
The Lex_select_limit already existed with the same elements and was used in
by the yacc parser.
This commit is in preparation for FETCH FIRST implementation, as it
simplifies a lot of the code.
Additionally, the parser is simplified by making use of the stack to
return Lex_select_limit objects.
Cleanup of init_query() too. Removes explicit_limit= 0 as it's done a bit later
in init_select() with limit_params.empty()
(Also fixes MDEV-25254).
Re-work Name Resolution for the argument of JSON_TABLE(json_doc, ....)
function. The json_doc argument can refer to other tables, but it can
only refer to the tables that precede[*] the JSON_TABLE(...) call.
[*] - For queries with RIGHT JOINs, the "preceding" is determined after
the query is normalized by converting RIGHT JOIN into left one.
The implementation is as follows:
- Table function arguments use their own Name_resolution_context.
- The Name_resolution_context now has a bitmap of tables that should be
ignored when searching for a field.
- get_disallowed_table_deps() walks the TABLE_LIST::nested_join tree
and computes a bitmap of tables that do not "precede" the given
JSON_TABLE(...) invocation (according the above definition of
"preceding").
This patch sets the proper name resolution context for outer references
used in a subquery from an ON clause. Usually this context is more narrow
than the name resolution context of the parent select that were used before
this fix.
This fix revealed another problem that concerned ON expressions used in
from clauses of specifications of derived tables / views / CTEs. The name
resolution outer context for such ON expression must be set to NULL to
prevent name resolution beyond the derived table where it is used.
The solution to resolve this problem applied in sql_derived.cc was provided
by Sergei Petrunia <sergey@mariadb.com>.
The change in sql_parse.cc is not good for 10.4+. A corresponding diff for
10.4+ will be provided in JIRA entry for this bug.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
SELECT_LEX objects that are "fake_select_lex" (i.e read UNION output)
used both INT_MAX and UINT_MAX as select_number.
- mysql_explain_union() assigned UINT_MAX
- st_select_lex_unit::add_fake_select_lex assigned INT_MAX
This didn't matter initially (before EXPLAIN FORMAT=JSON), because the
code had no checks for this value.
EXPLAIN FORMAT=JSON and later other features did introduce checks for
select_number values. The check had to check for two constants and
looked really confusing.
This patch joins the two constants into one - FAKE_SELECT_LEX_ID.
After the merging of MDEV-24915, 10.6 branch has regressions with handling of
concurrent write load against two or more cluster nodes. These regressions may
surface as cluster hanging, node crashes or data inconsistency. With some test
scenarios, the only visible symptom could be that the BF victim aborting happens
only by innodb lock wait timeout expiration. This would result only to poor
performance (by default 50 sec hang for each BF conflict), and could be somewhat
difficult to diagnose.
This pull request has following fixes to handle concurrent write load from
multiple nodes:
In lock_wait_wsrep_kill(), the victim trx was expected to be only in
TRX_STATE_ACTIVE state. With the delayed BF conflict handling, it can happen
that victim has advanced into pre commit state. This was fixed by choosing
victim both in TRX_STATE_ACTIVE and TRX_STATE_PREPARED states.
Victim transaction may be in several different states at the time of detected
lock conflict, and due to delayed BF aborting practice in MDEV-24915, the victim
may advance further before the actual BF aborting takes place. The BF aborting
in MDEV-24915 did not wake the victim, if it was in the state of waiting for
some other lock (than the one that was blocking the high priority thread).
This anomaly caused the innodb lock wait timeout expiration delays and poor
performance symptom. To fix this, lock_wait_wsrep_kill() now looks if
victim is in lock waiting state, and uses lock_cancel_waiting_and_release()
to cancel this lock wait.
wsrep_bf_abort() checks if the victim has active transaction (in wsrep-lib),
and starts a new transaction if there was no active transaction before.
Due to late BF aborting, the victim may have e.g. failed in certification
and is already aborting or has aborted at this stage. This has caused
problems in testing where BF aborter tries to BF abort himself.
The fix in wsrep_bf_abort() now skips the BF abort, if victim is aborting
or has aborted. Victim may not have started transaction yet in wsrep context,
but it may have acquired MDL locks (due to DDL execution), and this has
caused BF conflict. Such case does not require aborting in wsrep or
replication provider state.
BF aborting could cause BF-BF conflict scenario, if victim was already aborted
and changed to replayer having high priority as well. This BF-BF conflict
scenario is now avoided in lock_wait_wsrep() where we now check if blocking
lock holder is also high priority and is ordered before, caller should wait
for the lock in this situation.
The natural innodb deadlock resolving algorithm could pick BF thread as
deadlock victim. This is fixed by giving max weigh to BF threads in
Deadlock::report().
MDEV-24341 has changed excution paths in do_command() and this affects BF
aborted victim execution. This PR fixes one assert in do_command():
DBUG_ASSERT(!thd->async_state.pending_ops())
Which fired if the thd was BF aborted earlier. This assert is now changed
to allow pending_ops() if thd was BF aborted before.
With these fixes, long term highly conflicting write load could be run against
to node cluster. If binlogging is configured, log_slave_updates should be
also set.
A user connected to a server with an expired password
can't change password with the statement "SET password=..."
if this statement is run in PS mode. In mentioned use case a user
gets the error ER_MUST_CHANGE_PASSWORD on attempt to run
the statement PREPARE stmt FOR "SET password=...";
The reason of failure to reset password by a locked user using the
statement PREPARE stmt FOR "SET password=..." is that PS-related
statements are not listed among the commands allowed for execution
by a user with expired password. However, simple adding of PS-related
statements (PREPARE FOR/EXECUTE/DEALLOCATE PREPARE ) to the list of
statements allowed for execution by a locked user is not enough
to solve problems, since it opens the opportunity for a locked user
to execute any statement in the PS mode.
To exclude this opportunity, additional checking that the statement
being prepared for execution in PS-mode is the SET statement has to be added.
This extra checking has been added by this patch into the method
Prepared_statement::prepared() that executed on preparing any statement
for execution in PS-mode.
Assert was:
mariadbd: /my/maria-10.6/wsrep-lib/src/client_state.cpp:256:
int wsrep::client_state::after_statement(): Assertion `state() == s_exec'
The reason was because of two faults:
- A missing test for WSREP(thd) when checking wsrep_after_statement(()
- THD->wsrep_cs().state was set to s_idle instead of s_none
Adds an implementation for SELECT ... FOR UPDATE SKIP LOCKED /
SELECT ... LOCK IN SHARED MODE SKIP LOCKED
This is implemented only InnoDB at the moment, not in RockDB yet.
This adds a new hander flag HA_CAN_SKIP_LOCKED than
will be used when the storage engine advertises the flag.
When a storage engine indicates this flag it will get
TL_WRITE_SKIP_LOCKED and TL_READ_SKIP_LOCKED transaction types.
The Lex structure has been updated to store both the FOR UPDATE/LOCK IN
SHARE as well as the SKIP LOCKED so the SHOW CREATE VIEW
implementation is simplier.
"SELECT FOR UPDATE ... SKIP LOCKED" combined with CREATE TABLE AS or
INSERT.. SELECT on the result set is not safe for STATEMENT based
replication. MIXED replication will replicate this as row based events."
Thanks to guidance from Facebook commit
193896c466
This helped verify basic test case, and components that need implementing
(even though every part was implemented differently).
Thanks Marko for guidance on simplier InnoDB implementation.
Reviewers: Marko, Monty
Use < TL_FIRST_WRITE for determining a READ transaction.
Use TL_FIRST_WRITE as the relative operator replacing TL_WRITE_ALLOW_WRITE
as the minimium WRITE lock type.
