Withing this task the following changes were made:
- Added sending of metadata info in prepare phase for the admin related
command (check table, checksum table, repair, optimize, analyze).
- Refactored implmentation of HELP command to support its execution in
PS mode
- Added support for execution of LOAD INTO and XA- related statements
in PS mode
- Modified mysqltest.cc to run statements in PS mode unconditionally
in case the option --ps-protocol is set. Formerly, only those statements
were executed using PS protocol that matched the hard-coded regular expression
- Fixed the following issues:
The statement
explain select (select 2)
executed in regular and PS mode produces different results:
MariaDB [test]> prepare stmt from "explain select (select 2)";
Query OK, 0 rows affected (0,000 sec)
Statement prepared
MariaDB [test]> execute stmt;
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| 1 | PRIMARY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | No tables used |
| 2 | SUBQUERY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | No tables used |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
2 rows in set (0,000 sec)
MariaDB [test]> explain select (select 2);
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| 1 | SIMPLE | NULL | NULL | NULL | NULL | NULL | NULL | NULL | No tables used |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
1 row in set, 1 warning (0,000 sec)
In case the statement
CREATE TABLE t1 SELECT * FROM (SELECT 1 AS a, (SELECT a+0)) a
is run in PS mode it fails with the error
ERROR 1054 (42S22): Unknown column 'a' in 'field list'.
- Uniform handling of read-only variables both in case the SET var=val
statement is executed as regular or prepared statememt.
- Fixed assertion firing on handling LOAD DATA statement for temporary tables
- Relaxed assert condition in the function lex_end_stage1() by adding
the commands SQLCOM_ALTER_EVENT, SQLCOM_CREATE_PACKAGE,
SQLCOM_CREATE_PACKAGE_BODY to a list of supported command
- Removed raising of the error ER_UNSUPPORTED_PS in the function
check_prepared_statement() for the ALTER VIEW command
- Added initialization of the data memember st_select_lex_unit::last_procedure
(assign NULL value) in the constructor
Without this change the test case main.ctype_utf8 fails with the following
report in case it is run with the optoin --ps-protocol.
mysqltest: At line 2278: query 'VALUES (_latin1 0xDF) UNION VALUES(_utf8'a' COLLATE utf8_bin)' failed: 2013: Lost connection
- The following bug reports were fixed:
MDEV-24460: Multiple rows result set returned from stored
routine over prepared statement binary protocol is
handled incorrectly
CONC-519: mariadb client library doesn't handle server_status and
warnign_count fields received in the packet
COM_STMT_EXECUTE_RESPONSE.
Reasons for these bug reports have the same nature and caused by
missing loop iteration on results sent by server in response to
COM_STMT_EXECUTE packet.
Enclosing of statements for processing of COM_STMT_EXECUTE response
in the construct like
do
{
...
} while (!mysql_stmt_next_result());
fixes the above mentioned bug reports.
cherry-pick commit: 1fff2398ef3dda1a7e8404f18e4e165823bd4e0a
MDEV-22530 post push fixes from 10.6.
Followup. If the KILL happens - report it as a failure,
don't eat it up silently. Note that this has to be done after `table_name`
is populated, so that the error message could show it.
Followup. If the KILL happens - report it as a failure,
don't eat it up silently. Note that this has to be done after `table_name`
is populated, so that the error message could show it.
Changes:
- To detect automatic strlen() I removed the methods in String that
uses 'const char *' without a length:
- String::append(const char*)
- Binary_string(const char *str)
- String(const char *str, CHARSET_INFO *cs)
- append_for_single_quote(const char *)
All usage of append(const char*) is changed to either use
String::append(char), String::append(const char*, size_t length) or
String::append(LEX_CSTRING)
- Added STRING_WITH_LEN() around constant string arguments to
String::append()
- Added overflow argument to escape_string_for_mysql() and
escape_quotes_for_mysql() instead of returning (size_t) -1 on overflow.
This was needed as most usage of the above functions never tested the
result for -1 and would have given wrong results or crashes in case
of overflows.
- Added Item_func_or_sum::func_name_cstring(), which returns LEX_CSTRING.
Changed all Item_func::func_name()'s to func_name_cstring()'s.
The old Item_func_or_sum::func_name() is now an inline function that
returns func_name_cstring().str.
- Changed Item::mode_name() and Item::func_name_ext() to return
LEX_CSTRING.
- Changed for some functions the name argument from const char * to
to const LEX_CSTRING &:
- Item::Item_func_fix_attributes()
- Item::check_type_...()
- Type_std_attributes::agg_item_collations()
- Type_std_attributes::agg_item_set_converter()
- Type_std_attributes::agg_arg_charsets...()
- Type_handler_hybrid_field_type::aggregate_for_result()
- Type_handler_geometry::check_type_geom_or_binary()
- Type_handler::Item_func_or_sum_illegal_param()
- Predicant_to_list_comparator::add_value_skip_null()
- Predicant_to_list_comparator::add_value()
- cmp_item_row::prepare_comparators()
- cmp_item_row::aggregate_row_elements_for_comparison()
- Cursor_ref::print_func()
- Removes String_space() as it was only used in one cases and that
could be simplified to not use String_space(), thanks to the fixed
my_vsnprintf().
- Added some const LEX_CSTRING's for common strings:
- NULL_clex_str, DATA_clex_str, INDEX_clex_str.
- Changed primary_key_name to a LEX_CSTRING
- Renamed String::set_quick() to String::set_buffer_if_not_allocated() to
clarify what the function really does.
- Rename of protocol function:
bool store(const char *from, CHARSET_INFO *cs) to
bool store_string_or_null(const char *from, CHARSET_INFO *cs).
This was done to both clarify the difference between this 'store' function
and also to make it easier to find unoptimal usage of store() calls.
- Added Protocol::store(const LEX_CSTRING*, CHARSET_INFO*)
- Changed some 'const char*' arrays to instead be of type LEX_CSTRING.
- class Item_func_units now used LEX_CSTRING for name.
Other things:
- Fixed a bug in mysql.cc:construct_prompt() where a wrong escape character
in the prompt would cause some part of the prompt to be duplicated.
- Fixed a lot of instances where the length of the argument to
append is known or easily obtain but was not used.
- Removed some not needed 'virtual' definition for functions that was
inherited from the parent. I added override to these.
- Fixed Ordered_key::print() to preallocate needed buffer. Old code could
case memory overruns.
- Simplified some loops when adding char * to a String with delimiters.
This was done to simplify copying of with_* flags
Other things:
- Changed Flags to C++ enums, which enables gdb to print
out bit values for the flags. This also enables compiler
errors if one tries to manipulate a non existing bit in
a variable.
- Added set_maybe_null() as a shortcut as setting the
MAYBE_NULL flags was used in a LOT of places.
- Renamed PARAM flag to SP_VAR to ensure it's not confused with persistent
statement parameters.
The reason for the change is that neither clang or gcc can do efficient
code when several bit fields are change at the same time or when copying
one or more bits between identical bit fields.
Updated bits explicitely with & and | is MUCH more efficient than what
current compilers can do.
Problem:
========
Aborting OPTIMIZE TABLE still logs in binary logs and replicates to the
Slave server. "Optimize table" command under execution, is killed by using
"Ctrl-C" as shown below.
MariaDB [test]> optimize table t2;
^CCtrl-C -- query killed. Continuing normally.
In spite of query execution being interrupted the query gets written to
binary log.
Analysis:
========
Admin command execution logic is not handling KILL command, hence it
ignores the KILL command and completes its execution.
Fix:
===
Check for thread killed notification, during admin command execution and
handle it. If thread kill occurs prior to any table modification the query
will not be written to binary log. If kill happens after at least one table
is modified then the query will be written to binary log. Ex: command in
execution is 'OPTIMIZE TABLE t1,t2' and the thread kill happens after t1
table is modified then 'OPTIMIZE TABLE t1,t2' will be written to binary log
as admin commands will not make the slave to diverge from master.
Problem:
=======
In slave_parallel_mode=optimistic configuration, when admin commands and
DML operation on the same table are scheduled simultaneously for execution,
it results in lock conflict and slave server either hangs due to
deadlock or goes down with an assert.
Analysis:
========
Admin commands OPTIMIZE, REPAIR and ANALYZE are written to binary log as
ordinary transactions. When 'slave_parallel_mode' is 'optimistic' DMLs are
allowed to run in parallel. But these locks are not detected by parallel
replication deadlock detection-and-handling mechanism. At times they result
in deadlock or assertion.
Fix:
===
Flag admin commands as DDL in Gtid_log_event at the time of writing to
binary log. Add a new bit EXECUTED_TABLE_ADMIN_CMD to
'm_unsafe_rollback_flags'. During 'mysql_admin_table' command execution it
accepts a list of tables to be processed and executes them in a loop. Upon
successful execution enable 'EXECUTED_TABLE_ADMIN_CMD' bit in
thd->transaction.stmt_unsafe_rollback_flags. Gtid_log_event constructor
will notice this flag and mark the current transaction with 'FL_DDL' flag.
Gtid_log_events marked as FL_DDL will not be scheduled parallel execution,
on the slave. They will execute in isolation to prevent deadlocks.
Note: Removed the call to 'trans_commit_implicit' from 'mysql_admin_table'
function as 'mysql_execute_command' will take care of invoking
'trans_commit_implicit'.
Use < TL_FIRST_WRITE for determining a READ transaction.
Use TL_FIRST_WRITE as the relative operator replacing TL_WRITE_ALLOW_WRITE
as the minimium WRITE lock type.
`WSREP_CLIENT` is used as condition for starting ALTER/OPTIMIZE/REPAIR TOI.
Using this condition async replicated affected DDL's will not be replicated.
Fixed by removing this condition.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
2 different problems:
- MYSQL_BIN_LOG::write() did not check if mdl_context.acquire_lock() failed
- Sql_cmd_optimize_table::execute() and Sql_cmd_repair_table::execute()
called write_bin_log(), which could fail if sql_admin() had already
called my_eof()
Fixed by adding check for aquire_lock() return status and protect
write_bin_log() in the above two functions with set_overwrite_status().
The reason for the failure is that
thd->mdl_context.release_transactional_locks()
was called after commit & rollback even in cases where the current
transaction is still active.
For 10.2, 10.3 and 10.4 the fix is simple:
- Replace all calls to thd->mdl_context.release_transactional_locks() with
thd->release_transactional_locks(). The thd function will only call
the mdl_context function if there are no active transactional locks.
In 10.6 we will better fix where we will change the return value for
some trans_xxx() functions to indicate if transaction did close the
transaction or not. This will avoid the need of the indirect call.
Other things:
- trans_xa_commit() and trans_xa_rollback() will automatically
call release_transactional_locks() if the transaction is closed.
- We can't do that for the other functions as the caller of many of these
are doing additional work (like close_thread_tables) before calling
release_transactional_locks().
- Added missing abort_result_set() and missing DBUG_RETURN in
select_create::send_eof()
- Fixed wrong indentation in injector::transaction::commit()
This PR fixes same issue as MDEV-21577 for TRUNCATE TABLE.
MDEV-21577 fixed TOI replication for OPTIMIZE, REPAIR and ALTER TABLE
operating on FK child table. It was later found out that also TRUNCATE
has similar problem and needs a fix.
The actual fix is to do FK parent table lookup before TRUNCATE TOI
isolation and append found FK parent table names in certification key
list for the write set.
PR contains also new test scenario in galera_ddl_fk_conflict test where
FK child has two FK parent tables and there are two DML transactions operating
on both parent tables.
For development convenience, new TO isolation macro was added:
WSREP_TO_ISOLATION_BEGIN_IF and WSREP_TO_ISOLATION_BEGIN_ALTER macro was changed
to skip the goto statement.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Some DDL statements appear to acquire MDL locks for a table referenced by
foreign key constraint from the actual affected table of the DDL statement.
OPTIMIZE, REPAIR and ALTER TABLE belong to this class of DDL statements.
Earlier MariaDB version did not take this in consideration, and appended
only affected table in the certification key list in write set.
Because of missing certification information, it could happen that e.g.
OPTIMIZE table for FK child table could be allowed to apply in parallel
with DML operating on the foreign key parent table, and this could lead to
unhandled MDL lock conflicts between two high priority appliers (BF).
The fix in this patch, changes the TOI replication for OPTIMIZE, REPAIR and
ALTER TABLE statements so that before the execution of respective DDL
statement, there is foreign key parent search round. This FK parent search
contains following steps:
* open and lock the affected table (with permissive shared locks)
* iterate over foreign key contstraints and collect and array of Fk parent
table names
* close all tables open for the THD and release MDL locks
* do the actual TOI replication with the affected table and FK parent
table names as key values
The patch contains also new mtr test for verifying that the above mentioned
DDL statements replicate without problems when operating on FK child table.
The mtr test scenario #1, which can be used to check if some other DDL
(on top of OPTIMIZE, REPAIR and ALTER) could cause similar excessive FK
parent table locking.
Reviewed-by: Aleksey Midenkov <aleksey.midenkov@mariadb.com>
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Bugs fixed:
- prepare_for_repair() didn't close all open files if table opened failed
because of out-of-memory
- If dd_recreate_table() failed, the data file was not properly restored
from it's temporary name
- Aria repair initializing code didn't properly clear all used structs
before calling error, which caused crashed in memory-free calls.
- maria_delete_table() didn't register if table open failed. This could
calls my_error() to be called without returning 1 to the caller, which
cased failures in my_ok()
Note when merging to 10.5:
- Remove the #if MYSQL_VERSION from sql_admin.cc
Do not collect EITS statistics for this statement:
ALTER TABLE t ANALYZE PARTITION p
EITS stats are currently global, not per-partition.
Collecting global stats when we are asked to process just one partition
causes issues for DBAs.
Apply this patch from Percona Server (amended for 10.5):
commit cd7201514fee78aaf7d3eb2b28d2573c76f53b84
Author: Laurynas Biveinis <laurynas.biveinis@gmail.com>
Date: Tue Nov 14 06:34:19 2017 +0200
Fix bug 1704195 / 87065 / TDB-83 (Stop ANALYZE TABLE from flushing table definition cache)
Make ANALYZE TABLE stop flushing affected tables from the table
definition cache, which has the effect of not blocking any subsequent
new queries involving the table if there's a parallel long-running
query:
- new table flag HA_ONLINE_ANALYZE, return it for InnoDB and TokuDB
tables;
- in mysql_admin_table, if we are performing ANALYZE TABLE, and the
table flag is set, do not remove the table from the table
definition cache, do not invalidate query cache;
- in partitioning handler, refresh the query optimizer statistics
after ANALYZE if the underlying handler supports HA_ONLINE_ANALYZE;
- new testcases main.percona_nonflushing_analyze_debug,
parts.percona_nonflushing_abalyze_debug and a supporting debug sync
point.
For TokuDB, this change exposes bug TDB-83 (Index cardinality stats
updated for handler::info(HA_STATUS_CONST), not often enough for
tokudb_cardinality_scale_percent). TokuDB may return different
rec_per_key values depending on dynamic variable
tokudb_cardinality_scale_percent value. The server does not have a way
of knowing that changing this variable invalidates the previous
rec_per_key values in any opened table shares, and so does not call
info(HA_STATUS_CONST) again. Fix by updating rec_per_key for both
HA_STATUS_CONST and HA_STATUS_VARIABLE. This also forces a re-record
of tokudb.bugs.db756_card_part_hash_1_pick, with the new output
seeming to be more correct.
