Also fixed issue with drop role not clearing internal memory entry
for that role. The issue was due to a condition introduced in handle_grant_data
Updated testsuite to also check the possible error conditions.
BNL and BNLH joins pre-filter the records from a joined table via JOIN_TAB::cache_select->cond.
There is no need to re-evaluate the same conditions via JOIN_TAB::select_cond. This patch removes
the duplicated conditions from the top-level conjuncts of each pushed condition.
The added "Using where" in few EXPLAINs is due to taking into account tab->cache_select->cond
in addition to tab->select_cond in JOIN::save_explain_data_intern.
- Port grant_explain_non_select.{test,result} from mysql-5.6
- Per Sanja's hint, fix mysql_make_view() to take into
account that EXPLAIN now is not necessarily EXPLAIN SELECT.
- Fix a problem with EXPLAIN multi_table UPDATE:
= Do use multi_update object, because multi_update::prepare() does
various setup, e.g. it disables index-only for the tables to be updated.
= Protect multi_update::prepare() from being invoked multiple times.
If the query has subqueries, they may try to invoke it, for some reason.
Update the SHOW EXPLAIN code to work with the
new architecture (part#1):
Before, SHOW EXPLAIN operated on real query plan structures,
which meant it had to check when SELECTs are created/deleted.
SELECTs would call apc_target->enable() when they got a query
plan and disable() when their query plan was deleted.
Now, Explain data structure becomes available at once (and we
call apc_target->enable()) and then it stays until it is deleted
(when that happens, we call apc_target->disable()).
This worklog aims at testing the two following scenarios:
1) Whenever the mysql_binlog_send method (dump thread)
reaches the end of file when reading events from the binlog, before
checking if it should wait for more events, there was a test to
check if the file being read was still active, i.e, it was the last
known binlog. However, it was possible that something was written to
the binary log and then a rotation would happen, after EOF was
detected and before the check for active was performed. In this
case, the end of the binary log would not be read by the dump
thread, and this would cause the slave to lose updates.
This test verifies that the problem has been fixed. It waits during
this window while forcing a rotation in the binlog.
2) Verify dump thread can send events in active file, correctly after
encountering an IO error.
- Made slaves temporary table multi-thread slave safe by adding mutex around save_temporary_table usage.
- rli->save_temporary_tables is the active list of all used temporary tables
- This is copied to THD->temporary_tables when temporary tables are opened and updated when temporary tables are closed
- Added THD->lock_temporary_tables() and THD->unlock_temporary_tables() to simplify this.
- Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code.
- Added is_part_of_group() to mark functions that are part of the next function. This replaces setting IN_STMT when events are executed.
- Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
- If slave_skip_counter is set run things in single threaded mode. This simplifies code for skipping events.
- Updating state of relay log (IN_STMT and IN_TRANSACTION) is moved to one single function: update_state_of_relay_log()
We can't use OPTION_BEGIN to check for the state anymore as the sql_driver and sql execution threads may be different.
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts
is_in_group() is now independent of state of executed transaction.
- Reset thd->transaction.all.modified_non_trans_table() if we did set it for single table row events.
This was mainly for keeping the flag as documented.
- Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
- Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
- Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
- Changed some functions to take rpl_group_info instead of Relay_log_info to make them multi-slave safe and to simplify usage
- do_shall_skip()
- continue_group()
- sql_slave_killed()
- next_event()
- Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
- set_thd_in_use_temporary_tables() removed as in_use is set on usage
- Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
- In open_table() reuse code from find_temporary_table()
Other things:
- More DBUG statements
- Fixed the rpl_incident.test can be run with --debug
- More comments
- Disabled not used function rpl_connect_master()
mysql-test/suite/perfschema/r/all_instances.result:
Moved sleep_lock and sleep_cond to rpl_group_info
mysql-test/suite/rpl/r/rpl_incident.result:
Updated result
mysql-test/suite/rpl/t/rpl_incident-master.opt:
Not needed anymore
mysql-test/suite/rpl/t/rpl_incident.test:
Fixed that test can be run with --debug
sql/handler.cc:
More DBUG_PRINT
sql/log.cc:
More comments
sql/log_event.cc:
Added DBUG statements
do_shall_skip(), continue_group() now takes rpl_group_info param
Use is_begin(), is_commit() and is_rollback() functions instead of inspecting query string
We don't have set slaves temporary tables 'in_use' as this is now done when tables are opened.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
Use IN_TRANSACTION flag to test state of relay log.
In rows_event_stmt_cleanup() reset thd->transaction.all.modified_non_trans_table if we had set this before.
sql/log_event.h:
do_shall_skip(), continue_group() now takes rpl_group_info param
Added is_part_of_group() to mark events that are part of the next event. This replaces setting IN_STMT when events are executed.
Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
sql/log_event_old.cc:
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/log_event_old.h:
Added is_part_of_group() to mark events that are part of the next event.
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/mysqld.cc:
Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
Relay_log_info::sleep_lock -> Rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> Rpl_group_info::sleep_cond
sql/mysqld.h:
Updated types and names
sql/rpl_gtid.cc:
More DBUG
sql/rpl_parallel.cc:
Updated TODO section
Set thd for event that is execution
Use new is_begin(), is_commit() and is_rollback() functions.
More comments
sql/rpl_rli.cc:
sql_thd -> sql_driver_thd
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts.
Reset table->in_use for temporary tables as the table may have been used by another THD.
Use IN_TRANSACTION instead of OPTION_BEGIN to check state of relay log.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
sql/rpl_rli.h:
Changed relay log state flags to bit masks instead of bit positions (most other code we have uses bit masks)
Added IN_TRANSACTION to mark if we are in a BEGIN ... COMMIT section.
save_temporary_tables is now thread safe
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code
is_in_group() is now independent of state of executed transaction.
sql/slave.cc:
Simplifed arguments to io_salve_killed(), sql_slave_killed() and check_io_slave_killed(); No reason to supply THD as this is part of the given structure.
set_thd_in_use_temporary_tables() removed as in_use is set on usage in sql_base.cc
sql_thd -> sql_driver_thd
More DBUG
Added update_state_of_relay_log() which will calculate the IN_STMT and IN_TRANSACTION state of the relay log after the current element is executed.
If slave_skip_counter is set run things in single threaded mode.
Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
Disabled not used function rpl_connect_master()
Updated argument to next_event()
sql/sql_base.cc:
Added mutex around usage of slave's temporary tables. The active list is always kept up to date in sql->rgi_slave->save_temporary_tables.
Clear thd->temporary_tables after query (safety)
More DBUG
When using temporary table, set table->in_use to current thd as the THD may be different for slave threads.
Some code is ifdef:ed with REMOVE_AFTER_MERGE_WITH_10 as the given code in 10.0 is not yet in this tree.
In open_table() reuse code from find_temporary_table()
sql/sql_binlog.cc:
rli->sql_thd -> rli->sql_driver_thd
Remove duplicate setting of rgi->rli
sql/sql_class.cc:
Added helper functions rgi_lock_temporary_tables() and rgi_unlock_temporary_tables()
Would have been nicer to have these inline, but there was no easy way to do that
sql/sql_class.h:
Added functions to protect slaves temporary tables
sql/sql_parse.cc:
Added DBUG_PRINT
sql/transaction.cc:
Added comment
Objects of the classes Item_func_isnull and Item_func_isnotnull
must have the flag sargable set to TRUE.
Set the value of the flag sargable only in constructors of the
classes inherited from Item_int_func.
MDEV-5034:Wrong result on LEFT JOIN with a SELECT SQ or a merge view, UNION in IN subquery
Make reset null_row same as it was set in evaluate_null_complemented_join_record().
The problem was that view firlds detect null_row by not-yet-reset table.
The bug caused a memory overwrite in the function update_ref_and_keys()
It happened due to a wrong value of SELECT_LEX::cond_count. This value
historically was calculated by the fix_fields method. Now the logic of
calling this method became too complicated and, as a result, this value
is calculated not always correctly.
The patch changes the way how and when the values of SELECT_LEX::cond_count
and of SELECT_LEX::between_count are calculated. The new code does it just at
the beginning of update_ref_and_keys().
- Don't save UNION's EXPLAIN data if optimization failed with
an error. We could end up saving incomplete plan, which will
cause a crash when we attempt to print it.
Backport mysql-test/t/myisam_explain_non_select_all.test from mysql-5.6
- the .result file was modified because MariaDB choses different
query plans in a number cases. Also, we don't have some of the
"incorrect EXPLAIN output" bugs that they still have.
The .test file and includes were taken verbatim with one
exception: two tests were disabled with --disable parsing:
1. @@sql_safe_updates is not enforced EXPLAINs of multitable
updates. In MariaDB, the execution itself will produce
ER_UPDATE_WITHOUT_KEY_IN_SAFE_MODE, but EXPLAIN won't.
2. Their case #71 hits some old bug in MyISAM (See their comments
in explain_non_select.inc for details).
Do not pass PCRE_UCP flag for binary data.
This makes bytes 0x80..FF not to belong to
generic character classes \d (digit) and \w (word character).
SELECT 0xFF RLIKE '\\w';
-> 0
Note, this change does not affect non-binary data,
which is still examined with the PCRE_UCP flag by default.
Improve STOP SLAVE in parallel mode.
Now, the parallel part will queue the current event group to the
end, and then stop queing any more events. Each worker will
complete the current event group, and then just skip any further
queued events.
