The InnoDB redo log used to be formatted in blocks of 512 bytes.
The log blocks were encrypted and the checksum was calculated while
holding log_sys.mutex, creating a serious scalability bottleneck.
We remove the fixed-size redo log block structure altogether and
essentially turn every mini-transaction into a log block of its own.
This allows encryption and checksum calculations to be performed
on local mtr_t::m_log buffers, before acquiring log_sys.mutex.
The mutex only protects a memcpy() of the data to the shared
log_sys.buf, as well as the padding of the log, in case the
to-be-written part of the log would not end in a block boundary of
the underlying storage. For now, the "padding" consists of writing
a single NUL byte, to allow recovery and mariadb-backup to detect
the end of the circular log faster.
Like the previous implementation, we will overwrite the last log block
over and over again, until it has been completely filled. It would be
possible to write only up to the last completed block (if no more
recent write was requested), or to write dummy FILE_CHECKPOINT records
to fill the incomplete block, by invoking the currently disabled
function log_pad(). This would require adjustments to some logic around
log checkpoints, page flushing, and shutdown.
An upgrade after a crash of any previous version is not supported.
Logically empty log files from a previous version will be upgraded.
An attempt to start up InnoDB without a valid ib_logfile0 will be
refused. Previously, the redo log used to be created automatically
if it was missing. Only with with innodb_force_recovery=6, it is
possible to start InnoDB in read-only mode even if the log file
does not exist. This allows the contents of a possibly corrupted
database to be dumped.
Because a prepared backup from an earlier version of mariadb-backup
will create a 0-sized log file, we will allow an upgrade from such
log files, provided that the FIL_PAGE_FILE_FLUSH_LSN in the system
tablespace looks valid.
The 512-byte log checkpoint blocks at 0x200 and 0x600 will be replaced
with 64-byte log checkpoint blocks at 0x1000 and 0x2000.
The start of log records will move from 0x800 to 0x3000. This allows us
to use 4096-byte aligned blocks for all I/O in a future revision.
We extend the MDEV-12353 redo log record format as follows.
(1) Empty mini-transactions or extra NUL bytes will not be allowed.
(2) The end-of-minitransaction marker (a NUL byte) will be replaced
with a 1-bit sequence number, which will be toggled each time when the
circular log file wraps back to the beginning.
(3) After the sequence bit, a CRC-32C checksum of all data
(excluding the sequence bit) will written.
(4) If the log is encrypted, 8 bytes will be written before
the checksum and included in it. This is part of the
initialization vector (IV) of encrypted log data.
(5) File names, page numbers, and checkpoint information will not be
encrypted. Only the payload bytes of page-level log will be encrypted.
The tablespace ID and page number will form part of the IV.
(6) For padding, arbitrary-length FILE_CHECKPOINT records may be written,
with all-zero payload, and with the normal end marker and checksum.
The minimum size is 7 bytes, or 7+8 with innodb_encrypt_log=ON.
In mariadb-backup and in Galera snapshot transfer (SST) scripts, we will
no longer remove ib_logfile0 or create an empty ib_logfile0. Server startup
will require a valid log file. When resizing the log, we will create
a logically empty ib_logfile101 at the current LSN and use an atomic rename
to replace ib_logfile0 with it. See the test innodb.log_file_size.
Because there is no mandatory padding in the log file, we are able
to create a dummy log file as of an arbitrary log sequence number.
See the test mariabackup.huge_lsn.
The parameter innodb_log_write_ahead_size and the
INFORMATION_SCHEMA.INNODB_METRICS counter log_padded will be removed.
The minimum value of innodb_log_buffer_size will be increased to 2MiB
(because log_sys.buf will replace recv_sys.buf) and the increment
adjusted to 4096 bytes (the maximum log block size).
The following INFORMATION_SCHEMA.INNODB_METRICS counters will be removed:
os_log_fsyncs
os_log_pending_fsyncs
log_pending_log_flushes
log_pending_checkpoint_writes
The following status variables will be removed:
Innodb_os_log_fsyncs (this is included in Innodb_data_fsyncs)
Innodb_os_log_pending_fsyncs (this was limited to at most 1 by design)
log_sys.get_block_size(): Return the physical block size of the log file.
This is only implemented on Linux and Microsoft Windows for now, and for
the power-of-2 block sizes between 64 and 4096 bytes (the minimum and
maximum size of a checkpoint block). If the block size is anything else,
the traditional 512-byte size will be used via normal file system
buffering.
If the file system buffers can be bypassed, a message like the following
will be issued:
InnoDB: File system buffers for log disabled (block size=512 bytes)
InnoDB: File system buffers for log disabled (block size=4096 bytes)
This has been tested on Linux and Microsoft Windows with both sizes.
On Linux, only enable O_DIRECT on the log for innodb_flush_method=O_DSYNC.
Tests in 3 different environments where the log is stored in a device
with a physical block size of 512 bytes are yielding better throughput
without O_DIRECT. This could be due to the fact that in the event the
last log block is being overwritten (if multiple transactions would
become durable at the same time, and each of will write a small
number of bytes to the last log block), it should be faster to re-copy
data from log_sys.buf or log_sys.flush_buf to the kernel buffer,
to be finally written at fdatasync() time.
The parameter innodb_flush_method=O_DSYNC will imply O_DIRECT for
data files. This option will enable O_DIRECT on the log file on Linux.
It may be unsafe to use when the storage device does not support
FUA (Force Unit Access) mode.
When the server is compiled WITH_PMEM=ON, we will use memory-mapped
I/O for the log file if the log resides on a "mount -o dax" device.
We will identify PMEM in a start-up message:
InnoDB: log sequence number 0 (memory-mapped); transaction id 3
On Linux, we will also invoke mmap() on any ib_logfile0 that resides
in /dev/shm, effectively treating the log file as persistent memory.
This should speed up "./mtr --mem" and increase the test coverage of
PMEM on non-PMEM hardware. It also allows users to estimate how much
the performance would be improved by installing persistent memory.
On other tmpfs file systems such as /run, we will not use mmap().
mariadb-backup: Eliminated several variables. We will refer
directly to recv_sys and log_sys.
backup_wait_for_lsn(): Detect non-progress of
xtrabackup_copy_logfile(). In this new log format with
arbitrary-sized blocks, we can only detect log file overrun
indirectly, by observing that the scanned log sequence number
is not advancing.
xtrabackup_copy_logfile(): On PMEM, do not modify the sequence bit,
because we are not allowed to modify the server's log file, and our
memory mapping is read-only.
trx_flush_log_if_needed_low(): Do not use the callback on pmem.
Using neither flush_lock nor write_lock around PMEM writes seems
to yield the best performance. The pmem_persist() calls may
still be somewhat slower than the pwrite() and fdatasync() based
interface (PMEM mounted without -o dax).
recv_sys_t::buf: Remove. We will use log_sys.buf for parsing.
recv_sys_t::MTR_SIZE_MAX: Replaces RECV_SCAN_SIZE.
recv_sys_t::file_checkpoint: Renamed from mlog_checkpoint_lsn.
recv_sys_t, log_sys_t: Removed many data members.
recv_sys.lsn: Renamed from recv_sys.recovered_lsn.
recv_sys.offset: Renamed from recv_sys.recovered_offset.
log_sys.buf_size: Replaces srv_log_buffer_size.
recv_buf: A smart pointer that wraps log_sys.buf[recv_sys.offset]
when the buffer is being allocated from the memory heap.
recv_ring: A smart pointer that wraps a circular log_sys.buf[] that is
backed by ib_logfile0. The pointer will wrap from recv_sys.len
(log_sys.file_size) to log_sys.START_OFFSET. For the record that
wraps around, we may copy file name or record payload data to
the auxiliary buffer decrypt_buf in order to have a contiguous
block of memory. The maximum size of a record is less than
innodb_page_size bytes.
recv_sys_t::parse(): Take the smart pointer as a template parameter.
Do not temporarily add a trailing NUL byte to FILE_ records, because
we are not supposed to modify the memory-mapped log file. (It is
attached in read-write mode already during recovery.)
recv_sys_t::parse_mtr(): Wrapper for recv_sys_t::parse().
recv_sys_t::parse_pmem(): Like parse_mtr(), but if PREMATURE_EOF would be
returned on PMEM, use recv_ring to wrap around the buffer to the start.
mtr_t::finish_write(), log_close(): Do not enforce log_sys.max_buf_free
on PMEM, because it has no meaning on the mmap-based log.
log_sys.write_to_buf: Count writes to log_sys.buf. Replaces
srv_stats.log_write_requests and export_vars.innodb_log_write_requests.
Protected by log_sys.mutex. Updated consistently in log_close().
Previously, mtr_t::commit() conditionally updated the count,
which was inconsistent.
log_sys.write_to_log: Count swaps of log_sys.buf and log_sys.flush_buf,
for writing to log_sys.log (the ib_logfile0). Replaces
srv_stats.log_writes and export_vars.innodb_log_writes.
Protected by log_sys.mutex.
log_sys.waits: Count waits in append_prepare(). Replaces
srv_stats.log_waits and export_vars.innodb_log_waits.
recv_recover_page(): Do not unnecessarily acquire
log_sys.flush_order_mutex. We are inserting the blocks in arbitary
order anyway, to be adjusted in recv_sys.apply(true).
We will change the definition of flush_lock and write_lock to
avoid potential false sharing. Depending on sizeof(log_sys) and
CPU_LEVEL1_DCACHE_LINESIZE, the flush_lock and write_lock could
share a cache line with each other or with the last data members
of log_sys.
Thanks to Matthias Leich for providing https://rr-project.org traces
for various failures during the development, and to
Thirunarayanan Balathandayuthapani for his help in debugging
some of the recovery code. And thanks to the developers of the
rr debugger for a tool without which extensive changes to InnoDB
would be very challenging to get right.
Thanks to Vladislav Vaintroub for useful feedback and
to him, Axel Schwenke and Krunal Bauskar for testing the performance.
CreateServiceA, OpenServiceA, and couple of other functions do not work
correctly with non-ASCII character, in the special case where application
has defined activeCodePage=UTF8.
Workaround by redefining affected ANSI functions to own wrapper, which
works by converting narrow(ANSI) to wide, then calling wide function.
Deprecate original ANSI service functions, via declspec, so that we can catch
their use.
it's not printed, not cleaned up without perfschema,
so isn't supposed to be written into either
this fixes "Memory not freed" warnings when early command line
options produce warnings in non-perfschema builds
MySQL 5.5 in commit 177d8b0c12
introduced a configuration parameter innodb_force_load_corrupted
whose purpose was to allow a corrupted table to be dropped.
Given that MDEV-11412 in MariaDB 10.5.4 aims to allow any metadata
for a missing or corrupted table to be dropped, and given that
MDEV-17567 and MDEV-25506 and related tasks made DDL operations
crash-safe, the parameter no longer serves any purpose.
Because this obscure parameter was read-only (not settable by a client),
it seems that we can simply declare it with MARIADB_REMOVED_OPTION
(commit 1bc9cce702) without breaking
any upgrades.
DICT_ERR_IGNORE_INDEX: Replaces DICT_ERR_IGNORE_INDEX_ROOT and
DICT_ERR_IGNORE_CORRUPT, which were always set equally.
dict_load_indexes(): Report "No indexes found for table" in
a uniform way, and only when the DICT_ERR_IGNORE_INDEX flag is
not set.
If the clustered index is marked corrupted, and the operation
is DICT_ERR_IGNORE_DROP (we are about to drop the table), we will
load the metadata; else, we will return DB_INDEX_CORRUPT.
If SYS_INDEXES.PAGE is FIL_NULL, report an error or warning
unless we are about to drop the table.
dict_load_table_one(): Simplify the logic.
There is a server startup option --gdb a.k.a. --debug-gdb that requests
signals to be set for more convenient debugging. Most notably, SIGINT
(ctrl-c) will not be ignored, and you will be able to interrupt the
execution of the server while GDB is attached to it.
When we are debugging, the signal handlers that would normally display
a terse stack trace are useless.
When we are debugging with rr, the signal handlers may interfere with
a SIGKILL that could be sent to the process by the environment, and ruin
the rr replay trace, due to a Linux kernel bug
https://lkml.org/lkml/2021/10/31/311
To be able to diagnose bugs in kill+restart tests, we may really need
both a trace before the SIGKILL and a trace of the failure after a
subsequent server startup. So, we had better avoid hitting the problem
by simply not installing those signal handlers.
Dead code cleanup:
part_info->num_parts usage was wrong and working incorrectly in
mysql_drop_partitions() because num_parts is already updated in
prep_alter_part_table(). We don't have to update part_info->partitions
because part_info is destroyed at alter_partition_lock_handling().
Cleanups:
- DBUG_EVALUATE_IF() macro replaced by shorter form DBUG_IF();
- Typo in ER_KEY_COLUMN_DOES_NOT_EXITS.
Refactorings:
- Splitted write_log_replace_delete_frm() into write_log_delete_frm()
and write_log_replace_frm();
- partition_info via DDL_LOG_STATE;
- set_part_info_exec_log_entry() removed.
DBUG_EVALUATE removed
DBUG_EVALUTATE was only added for consistency together with
DBUG_EVALUATE_IF. It is not used anywhere in the code.
DBUG_SUICIDE() fix on release build
On release DBUG_SUICIDE() was statement. It was wrong as
DBUG_SUICIDE() is used in expression context.
The crash happened because my_isalnum() does not support character
sets with mbminlen>1.
The value of "ft_boolean_syntax" is converted to utf8 in do_string_check().
So calling my_isalnum() is combination with "default_charset_info" was wrong.
Adding new parameters (size_t length, CHARSET_INFO *cs) to
ft_boolean_check_syntax_string() and passing self->charset(thd)
as the character set.
This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.
In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.
TOI replication is used, in this approach, purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.
This patch also fixes mutex locking order and unprotected
THD member accesses on bf aborting case. We try to hold
THD::LOCK_thd_data during bf aborting. Only case where it
is not possible is at wsrep_abort_transaction before
call wsrep_innobase_kill_one_trx where we take InnoDB
mutexes first and then THD::LOCK_thd_data.
This will also fix possible race condition during
close_connection and while wsrep is disconnecting
connections.
Added wsrep_bf_kill_debug test case
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
- DISCARD/IMPORT TABLESPACE are the only tablespace commands left
- TABLESPACE arguments for CREATE TABLE and ALTER ... ADD PARTITION are
ignored.
- Tablespace names are not shown anymore in .frm and not shown in
information schema
Other things
- Removed end spaces from sql/CMakeList.txt
This adds following new thread states:
* waiting to execute in isolation - DDL is waiting to execute in TOI mode.
* waiting for TOI DDL - some other statement is waiting for DDL to complete.
* waiting for flow control - some statement is paused while flow control is in effect.
* waiting for certification - the transaction is being certified.
in about a hundred of users of MY_BITMAP, only two were using its
built-in mutex, and only one of those two was actually needing it.
Remove the mutex from MY_BITMAP, remove all associated conditions
and checks in bitmap functions. Use an external LOCK_temp_pool
mutex and temp_pool_set_next/temp_pool_clear_bit acccessors.
Remove bitmap_init/bitmap_free, always use my_* versions.
because the name was misleading, it counts not threads, but THDs,
and as THD_count is the only way to increment/decrement it, it
could as well be declared inside THD_count.
This is useful for thing like Item_true and Item_false that we
allocated and initalize once and want to ensure that nothing can
change them
Main changes:
- Memory protection is achived by allocating memory with mmap() and
protect it from write with mprotect()
- init_alloc_root(...,MY_ROOT_USE_MPROTECT) will create a
memroot that one can later use with protect_root() to turn it
read only or turn it back to read-write. All allocations to this
memroot is done with mmap() to ensure page alligned allocations.
- alloc_root() code was rearranged to combine normal and valgrind code.
- init_alloc_root() now changes block size to be power of 2's, to get less
memory fragmentation.
- Changed MEM_ROOT structure to make it smaller. Also renamed
MEM_ROOT m_psi_key to psi_key.
- Moved MY_THREAD_SPECIFIC marker in MEM_ROOT from block size (old hack)
to flags.
- Added global variable my_system_page_size. This is initialized at
startup.
