These test can sporadically show mutex deadlock warnings between LOCK_wsrep_thd
and LOCK_thd_data mutexes. This means that these mutexes can be locked in opposite
order by different threads, and thus result in deadlock situation.
To fix such issue, the locking policy of these mutexes should be revised and
enforced to be uniform. However, a quick code review shows that the number of
lock/unlock operations for these mutexes combined is between 100-200, and all these
mutex invocations should be checked/fixed.
On the other hand, it turns out that LOCK_wsrep_thd is used for protecting access to
wsrep variables of THD (wsrep_conflict_state, wsrep_query_state), whereas LOCK_thd_data
protects query, db and mysys_var variables in THD. Extending LOCK_thd_data to protect
also wsrep variables looks like a viable solution, as there should not be a use case
where separate threads need simultaneous access to wsrep variables and THD data variables.
In this commit LOCK_wsrep_thd mutex is refactored to be replaced by LOCK_thd_data.
By bluntly replacing LOCK_wsrep_thd by LOCK_thd_data, will result in double locking
of LOCK_thd_data, and some adjustements have been performed to fix such situations.
ALTER TABLE ... ADD PARTITION modifies the open TABLE structure,
and sets table->need_reopen=1 to reset these modifications
in case of an error.
But under LOCK TABLES the table isn't get reopened, despite need_reopen.
Fixed by reopening need_reopen tables under LOCK TABLE.
Counter for select numbering made stored with the statement (before was global)
So now it does have always accurate value which does not depend on
interruption of statement prepare by errors like lack of table in
a view definition.
1. Moving the following methods from THD to Item_change_list:
nocheck_register_item_tree_change()
check_and_register_item_tree_change()
rollback_item_tree_changes()
as they work only with the "change_list" member and don't
require anything else from THD.
2. Deriving THD from Item_change_list
This change will help to fix "MDEV-14603 signal 11 with short stacktrace" easier.
The function trans_rollback_to_savepoint(), unlike trans_savepoint(),
did not allow xa_state=XA_ACTIVE, so an attempt to do ROLLBCK TO SAVEPOINT
inside an XA transaction incorrectly returned an error
"...command cannot be executed ... in the ACTIVE state...".
Partially merging a MySQL patch:
7fb5c47390311d9b1b5367f97cb8fedd4102dd05
This is WL#7193 (Decouple THD and st_transactions)...
The currently merged part includes these changes:
- Introducing st_xid_state::check_has_uncommitted_xa()
- Reusing it in both trans_rollback_to_savepoint() and trans_savepoint(),
so now both allow XA_ACTIVE.
followup for 97c2a7354b6 - don't use thd->is_error(),
the error could've been set before TABLE_LIST::cleanup_items.
Use the error handler to count errors.
This fixes rpl.rpl_row_binlog_max_cache_size - it was failing when
ER_STMT_CACHE_FULL happened duing multi-table update. Because
multi_update::abort_result_set() calls do_updates() to update
as much as possible, so one cannot rely on thd->is_error() after that.
For running the Galera tests, the variable my_disable_leak_check
was set to true in order to avoid assertions due to memory leaks
at shutdown.
Some adjustments due to MDEV-13625 (merge InnoDB tests from MySQL 5.6)
were performed. The most notable behaviour changes from 10.0 and 10.1
are the following:
* innodb.innodb-table-online: adjustments for the DROP COLUMN
behaviour change (MDEV-11114, MDEV-13613)
* innodb.innodb-index-online-fk: the removal of a (1,NULL) record
from the result; originally removed in MySQL 5.7 in the
Oracle Bug #16244691 fix
377774689b
* innodb.create-index-debug: disabled due to MDEV-13680
(the MySQL Bug #77497 fix was not merged from 5.6 to 5.7.10)
* innodb.innodb-alter-autoinc: MariaDB 10.2 behaves like MySQL 5.6/5.7,
while MariaDB 10.0 and 10.1 assign different values when
auto_increment_increment or auto_increment_offset are used.
Also MySQL 5.6/5.7 exhibit different behaviour between
LGORITHM=INPLACE and ALGORITHM=COPY, so something needs to be tested
and fixed in both MariaDB 10.0 and 10.2.
* innodb.innodb-wl5980-alter: disabled because it would trigger an
InnoDB assertion failure (MDEV-13668 may need additional effort in 10.2)
Fixed by making sure that the sort buffer would have atleast MERGEBUFF2 keys.
Also fixed MDEV-13457 by making sure that an empty tree is never dumped to the disk
The problem was that the introduction of max-thread-mem-used can cause
an allocation error very early, even before mysql_parse() is called.
As mysql_parse() calls thd->reset_for_next_command(), which called
clear_error(), the error number was lost.
Fixed by adding an option to have unique messages for each KILL
signal and change max-thread-mem-used to use this new feature.
This removes a lot of problems with the original approach, where
one could get errors signaled silenty almost any time.
ixed by moving clear_error() from reset_for_next_command() to
do_command(), before any memory allocation for the thread.
Related changes:
- reset_for_next_command() now have an optional parameter if we should
call clear_error() or not. By default it's called, but not anymore from
dispatch_command() which was the original problem.
- Added optional paramater to clear_error() to force calling of
reset_diagnostics_area(). Before clear_error() only called
reset_diagnostics_area() if there was no error, so we normally
called reset_diagnostics_area() twice.
- This change removed several duplicated calls to clear_error()
when starting a query.
- Reset max_mem_used on COM_QUIT, to protect against kill during
quit.
- Use fatal_error() instead of setting is_fatal_error (cleanup)
- Set fatal_error if max_thead_mem_used is signaled.
(Same logic we use for other places where we are out of resources)
CREATE/DROP TEMPORARY TABLE are not safe to optimistically replicate in
parallel with other transactions, so they need to be marked as "ddl" in the
binlog.
This was already done for stand-alone CREATE/DROP TEMPORARY. But temporary
tables can also be created and dropped inside a BEGIN...END transaction, and
such transactions were not marked as ddl. Nor was the DROP TEMPORARY TABLE
statement emitted implicitly when a client connection is closed.
So this patch adds such ddl mark for the missing cases.
The difference to Kristian's original patch is mainly a fix in
mysql_trans_commit_alter_copy_data() to remember the unsafe_rollback_flags
over the temporary commit.
- Added variable tmp_disk_table_size
- Added variable tmp_memory_table_size as an alias for tmp_table_size
- Changed internal variable tmp_table_size to tmp_memory_table_size
- create_info.data_file_length is now set with tmp_disk_table_size
- Fixed that Aria doesn't reset max_data_file_length for internal tables
- Added status flag if table is full so that we can detect this on next insert.
This ensures that the table is always 'correct', but we get the error one
row after the row that grow the table too big.
- Removed some mutex lock for internal temporary tables
Define my_thread_id as an unsigned type, to avoid mismatch with
ulonglong. Change some parameters to this type.
Use size_t in a few more places.
Declare many flag constants as unsigned to avoid sign mismatch
when shifting bits or applying the unary ~ operator.
When applying the unary ~ operator to enum constants, explictly
cast the result to an unsigned type, because enum constants can
be treated as signed.
In InnoDB, change the source code line number parameters from
ulint to unsigned type. Also, make some InnoDB functions return
a narrower type (unsigned or uint32_t instead of ulint;
bool instead of ibool).
The temporary tables created for recursive table references
should be closed in close_thread_tables(), because they might
be used in the statements like ANALYZE WITH r AS (...) SELECT * from r
where r is defined through recursion.
Most notably, this includes MDEV-11623, which includes a fix and
an upgrade procedure for the InnoDB file format incompatibility
that is present in MariaDB Server 10.1.0 through 10.1.20.
In other words, this merge should address
MDEV-11202 InnoDB 10.1 -> 10.2 migration does not work
