The problem is that the query cache stores packets containing
the server status of the time when the cached statement was run.
This might lead to a wrong transaction status in the client side
if a statement is cached during a transaction and is later served
outside a transaction context (and vice-versa).
The solution is to take into account the transaction status when
storing in and serving from the query cache.
mysql-test/r/innodb_cache.result:
Update test case result.
mysql-test/r/query_cache.result:
Add test case result for Bug#36326
mysql-test/t/query_cache.test:
Add test case for Bug#36326
sql/mysql_priv.h:
Add new flags.
sql/sql_cache.cc:
Remember the transaction and autocommit status stored in the packet.
tests/mysql_client_test.c:
Add test case for Bug#36326
Detailed description of changes:
r3601 | marko | 2008-12-22 16:05:19 +0200 (Mon, 22 Dec 2008) | 9 lines
branches/5.1: Make
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED
a true replacement of SET GLOBAL INNODB_LOCKS_UNSAFE_FOR_BINLOG=1.
This fixes an error that was introduced in r370, causing
semi-consistent read not to not unlock rows in READ UNCOMMITTED mode.
(Bug #41671, Issue #146)
rb://67 approved by Heikki Tuuri
+ add workaround for bug 38124
+ messages into the protocol when sessions are switched
+ replace error numbers by error names
+ reset of system variables to initial values per subtest
+ remove a file created by this test
+ minor improvements in structure and formatting
The greedy optimizer tracks the current level of nested joins and the position
inside these by setting and maintaining a state that's global for the whole FROM
clause.
This state was correctly maintained inside the selection of the next partial plan
table (in best_extension_by_limited_search()).
greedy_search() also moves the current position by adding the last partial match
table when there's not enough tables in the partial plan found by
best_extension_by_limited_search().
This may require update of the global state variables that describe the current
position in the plan if the last table placed by greedy_search is not a top-level
join table.
Fixed by updating the state after placing the partial plan table in greedy_search()
in the same way this is done on entering the best_extension_by_limited_search().
Fixed the signature of the function called to update the state :
check_interleaving_with_nj
mysql-test/r/greedy_optimizer.result:
Bug #38795: test case
mysql-test/t/greedy_optimizer.test:
Bug #38795: test case
sql/sql_select.cc:
Bug #38795: correctly update current position when placing
the next partial plan table in greedy_search().
Added cleanup of status variables to the end of binlog_database.
Re-recorded .result file to account for cleanup statement.
NOTE: binlog.binlog_innodb also has had an FLUSH STATUS; statement added to it as well, but
adding this cleanup as a preventative measure.
Bounds-checks and blocksize corrections were applied to user-input,
but constants in the server were trusted implicitly. If these values
did not actually meet the requirements, the user could not set change
a variable, then set it back to the (wonky) factory default or maximum
by explicitly specifying it (SET <var>=<value> vs SET <var>=DEFAULT).
Now checks also apply to the server's presets. Wonky values and maxima
get corrected at startup. Consequently all non-offsetted values the user
sees are valid, and users can set the variable to that exact value if
they so desire.
mysql-test/r/read_buffer_size_basic.result:
test sets out of bounds value; we now throw a warning for this.
This is a side-effect: before, the maximum was higher than the
value we set here. The value was corrected to block-size, the
maximum was not, hence the value was smaller than the maximum
in this particular case. Now that we align the maxima at startup,
the value in SET is larger than the (corrected) maximum, and we
see a warning in this particular case. "This means we're doing it right."
mysql-test/r/read_rnd_buffer_size_basic.result:
test sets out of bounds value; we now throw a warning for this.
This is a side-effect: before, the maximum was higher than the
value we set here. The value was corrected to block-size, the
maximum was not, hence the value was smaller than the maximum
in this particular case. Now that we align the maxima at startup,
the value in SET is larger than the (corrected) maximum, and we
see a warning in this particular case. "This means we're doing it right."
mysys/my_getopt.c:
Do bounds-checking at start-up time so we'll catch and correct
wonky default values and upper limits.
sql/mysqld.cc:
If 0 is a legal value per the docs, not to mention the default, we shouldn't give 1 as
the lower limit.
storage/innobase/handler/ha_innodb.cc:
We are setting upper bounds here.
~0L gives -1. That is NOT what we want!
Problem 1: The test waits for an error in the slave sql thread,
then resolves the error and issues 'start slave'. However, there
is a gap between when the error is reported and the slave sql
thread stops. If this gap was long, the slave would still be
running when 'start slave' happened, so 'start slave' would fail
and cause a test failure.
Fix 1: Made wait_for_slave_sql_error wait for the slave to stop
instead of wait for error in the IO thread. After stopping, the
error code is verified. If the error code is wrong, debug info
is printed. To print debug info, the debug printing code in
wait_for_slave_param.inc was moved out to a new file,
show_rpl_debug_info.inc.
Problem 2: rpl_stm_mystery22 is a horrible name, the comments in
the file didn't explain anything useful, the test was generally
hard to follow, and the test was essentially duplicated between
rpl_stm_mystery22 and rpl_row_mystery22.
Fix 2: The test is about conflicts in the slave SQL thread,
hence I renamed the tests to rpl_{stm,row}_conflicts. Refactored
the test so that the work is done in
extra/rpl_tests/rpl_conflicts.inc, and
rpl.rpl_{row,stm}_conflicts merely sets some variables and then
sourced extra/rpl_tests/rpl_conflicts.inc.
The tests have been rewritten and comments added.
Problem 3: When calling wait_for_slave_sql_error.inc, you always
want to verify that the sql thread stops because of the expected
error and not because of some other error. Currently,
wait_for_slave_sql_error.inc allows the caller to omit the error
code, in which case all error codes are accepted.
Fix 3: Made wait_for_slave_sql_error.inc fail if no error code
is given. Updated rpl_filter_tables_not_exist accordingly.
Problem 4: rpl_filter_tables_not_exist had a typo, the dollar
sign was missing in a 'let' statement.
Fix 4: Added dollar sign.
Problem 5: When replicating from other servers than the one named
'master', the wait_for_slave_* macros were unable to print debug
info on the master.
Fix 5: Replace parameter $slave_keep_connection by
$master_connection.
mysql-test/extra/rpl_tests/rpl_conflicts.test:
rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/include/show_rpl_debug_info.inc:
Factored out the debug printing code from wait_for_slave_param.inc to
a new file, show_rpl_debug_info.inc.
Also removed the $slave_keep_connection parameter, and replaced it by
$master_connection. This allows printing debug info on the master, no
matter what the name of the master connection is.
mysql-test/include/start_slave.inc:
Replaced $slave_keep_connection by $master_connection.
mysql-test/include/stop_slave.inc:
Replaced $slave_keep_connection by $master_connection.
mysql-test/include/sync_slave_io_with_master.inc:
Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_io_to_start.inc:
Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_io_to_stop.inc:
Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_param.inc:
Factored out the debug printing code from wait_for_slave_param.inc to
a new file, show_rpl_debug_info.inc.
Also removed the $slave_keep_connection parameter, and replaced it by
$master_connection. This allows printing debug info on the master, no
matter what the name of the master connection is.
Had to move the printing of debug info out of the while loop because
of BUG number 41913.
mysql-test/include/wait_for_slave_sql_error.inc:
Made it wait until the slave sql thread has stopped. This
takes very short time and avoids race condition bugs in
test cases (e.g., fixes BUG#37718).
Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_sql_error_and_skip.inc:
Since wait_for_slave_sql_error now waits for the slave sql
thread to stop too, wait_for_slave_sql_error_and_skip does not
have to wait for the slave sql thread to stop.
Also, since wait_for_slave_sql_error now requires the parameter
$slave_sql_errno to be set, wait_for_slave_sql_error_and_skip
requires that as well: updated the usage instructions.
mysql-test/include/wait_for_slave_sql_to_start.inc:
Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_sql_to_stop.inc:
Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_to_start.inc:
Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_to_stop.inc:
Replaced $slave_keep_connection by $master_connection.
mysql-test/suite/rpl/r/rpl_row_conflicts.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_conflicts.result:
update result file
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Replaced $slave_keep_connection by $master_connection.
mysql-test/suite/rpl/t/rpl_filter_tables_not_exist.test:
Set $slave_sql_errno, since it is now required.
Add dollar sign to $show_sql_error (without dollar sign,
mtr makes it an environment variable).
mysql-test/suite/rpl/t/rpl_row_conflicts.test:
rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/suite/rpl/t/rpl_row_mystery22.test:
rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/suite/rpl/t/rpl_stm_conflicts.test:
rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
Also, cleaned up the test case a bit, and fixed BUG#37718.
2. Avoid bad effects of bug 41925 Warning 1366 Incorrect string value:
... for column processlist.info
3. Add poll routines which ensure that subtests meet stable scenarios.
This does not change the sense of the subtests.
No need to mask the error code returned by getting the next row to end of file when
doing filesort.
mysql-test/r/innodb_mysql_rbk.result:
Bug #41543: test case
mysql-test/t/innodb_mysql_rbk-master.opt:
Bug #41543: test case
mysql-test/t/innodb_mysql_rbk.test:
Bug #41543: test case
sql/filesort.cc:
Bug #41543: No need to mask the error code returned by getting the next row to end of file when
doing filesort.
When substituting system constant functions with a constant result
the server was not expecting that the function may return NULL.
Fixed by checking for NULL and returning Item_null (in the relevant
collation) if the result of the system constant function was NULL.
mysql-test/r/mysql.result:
Bug #41437: test case
mysql-test/t/mysql.test:
Bug #41437: test case.
Relies on database() returning NULL if no database is
selected.
sql/item_strfunc.cc:
Bug #41437: Check for NULL result on evaluating the system
constant function and return a constant NULL item.
The special TRUNCATE TABLE (DDL) transaction wasn't being properly
rolled back if a error occurred during row by row deletion. The
error can be caused by a foreign key restriction imposed by InnoDB
SE and would cause the server to erroneously issue a implicit
commit.
The solution is to rollback the transaction if a truncation via row
by row deletion fails, otherwise commit. All effects of a TRUNCATE
ABLE operation are rolled back if a row by row deletion fails.
mysql-test/include/commit.inc:
Truncate always starts a transaction and commits at the end.
The commit at the end increases the count by two, one is the
storage engine commit and the other is the binary log.
mysql-test/r/commit_1innodb.result:
Update test case results.
mysql-test/r/innodb_mysql.result:
Update test case results.
mysql-test/t/innodb_mysql.test:
Add test case for Bug#37016
sql/sql_delete.cc:
Move truncation using row by row deletion to its own function.
If row by row deletion fails, rollback the transaction.
Remove the meddling with disabling and enabling of autocommit
as TRUNCATE transaction is now explicitly ended (committed
or rolled back).
Problem was that it tried to run partitioning function calls when
opening a partitioned table, when it was explicitly disabled.
Solution is to check if the partitioning plugin is ready to use before
using any partitioning specific calls.
mysql-test/r/disabled_partition.require:
Bug#39893: Crash if select on a partitioned table, when partitioning is disabled
New require file to use when partitioning is disabled (but compiled in)
mysql-test/r/not_partition.result:
Bug#39893: Crash if select on a partitioned table, when partitioning is disabled
Updated testcase
mysql-test/r/partition_disabled.result:
Bug#39893: Crash if select on a partitioned table, when partitioning is disabled
New result file
mysql-test/std_data/parts/t1.frm:
Bug#39893: Crash if select on a partitioned table, when partitioning is disabled
frm file for 'create table t1 (a int) partition by hash (a)'
mysql-test/t/not_partition.test:
Bug#39893: Crash if select on a partitioned table, when partitioning is disabled
Updated test cases
mysql-test/t/partition_disabled-master.opt:
Bug#39893: Crash if select on a partitioned table, when partitioning is disabled
New opt file
mysql-test/t/partition_disabled.test:
Bug#39893: Crash if select on a partitioned table, when partitioning is disabled
New test file (looks like not_partition.test, but with different errors)
sql/sql_yacc.yy:
Bug#39893: Crash if select on a partitioned table, when partitioning is disabled
Better error message (it is already built with partitioning, but is explicitly
disabled).
sql/table.cc:
Bug#39893: Crash if select on a partitioned table, when partitioning is disabled
If the partitioning plugin is not ready, fail to open the table.
Problem: when mtr tries to create a directory, and the target
exists but is a file instead of directory, it tries several times
to create the directory again before it fails.
Fix: make it check if the target exists and is a non-directory.
mysql-test/lib/My/File/Path.pm:
mkpath() now stops with appropriate error message if the target
exists but is a non-directory.
The problem is that a mysql connection instance is not thread-safe
and reentrant, meaning that it can't be used concurrently and can't
be re-entered while it's already running. This applies for any form
of the server (embedded or not), but this rule can be violated in a
test case if the test sends a new command without waiting for the
result of previous command that was sent asynchronously and this can
lead to hangs when over a network or to crashes under embedded server
as the server query execution path will be re-entered concurrently
with the same connection structure.
The solution is to rework the test case so that the aforementioned
rule is obeyed.
mysql-test/t/innodb_bug38231.test:
Remove con3 as it is not necessary to reproduce the test case
and might cause problems as there is no guarantee on which
LOCK TABLE request will succeed first. Also, wait for statement
result before sending a new one on the same connection.
Passing dubious "year zero" in non-zero date (not "0000-00-00") could
lead to negative value for year internally, while variable was unsigned.
This led to Really Bad Things further down the line.
Now doing calculations with signed type for year internally.
mysql-test/r/date_formats.result:
show that very early dates no longer break DATE_FORMAT(..., '%W')
mysql-test/t/date_formats.test:
show that very early dates no longer break DATE_FORMAT(..., '%W')
sql-common/my_time.c:
Allow negative years numbers internally while keeping the interface.
otherwise if somebody passes year zero for whatever reason, we'll
get an integer wrap-around that can lead to Really Bad Things further
down the line. Note that amusingly, calcday_nr() already had signed
output and calc_weekday() already had signed input, anyway.
The binlog_innodb test was sensitive to what tests ran before it. Now run
FLUSH STATUS before performing operations that need to be checked.
sys_var_thd_ulong::update() was improperly casting an option value from
ulonglong to ulong before comparing it to the max allowed value. On systems
where ulong and ulonglong are of different size, this caused values greater
than ULONG_MAX to wrap around (not be truncated to ULONG_MAX, which appears to
have been the intention of the original coder), and caused some checks to work
incorrectly. This wasn't generally visible to the user, because later checks
would prevent the wrapped-around value from being used. But it caused warning
messages to differ between 32- and 64-bit platforms. Fix is to just remove the
cast. Also added a DBUG_ASSERT to ensure that the value really is capped
properly before finally stuffing it into the ulong.
locking type of temp table
The problem is that INSERT INTO .. SELECT FROM .. and CREATE
TABLE .. SELECT FROM a temporary table could inadvertently
overwrite the locking type of the temporary table. The lock
type of temporary tables should be a write lock by default.
The solution is to reset the lock type of temporary tables
back to its default value after they are used in a statement.
mysql-test/r/innodb_mysql.result:
Add test case result for Bug#41348
mysql-test/r/temp_table.result:
Add test case result for Bug#41348
mysql-test/t/innodb_mysql.test:
Add test case for Bug#41348
mysql-test/t/temp_table.test:
Add test case for Bug#41348
sql/sql_base.cc:
Allow the lock type of temp tables to be overwritten now that
the the value is being restored once the table is marked as
free for re-use. This makes the behavior consistent with that
of non-temporary tables and avoids confusion.
Add patch to fix the failing main.variables mysql-test. It started failing
after the variable innodb_use_sys_malloc was added because it matches
'%alloc%' and the test is badly written and expects that no new variables
like that will ever be added.
------------------------------------------------------------------------
r3601 | marko | 2008-12-22 16:05:19 +0200 (Mon, 22 Dec 2008) | 9 lines
branches/5.1: Make
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED
a true replacement of SET GLOBAL INNODB_LOCKS_UNSAFE_FOR_BINLOG=1.
This fixes an error that was introduced in r370, causing
semi-consistent read not to not unlock rows in READ COMMITTED mode.
(Bug #41671, Issue #146)
rb://67 approved by Heikki Tuuri
------------------------------------------------------------------------
