bug #57006 "Deadlock between HANDLER and FLUSH TABLES WITH READ
LOCK" and bug #54673 "It takes too long to get readlock for
'FLUSH TABLES WITH READ LOCK'".
The first bug manifested itself as a deadlock which occurred
when a connection, which had some table open through HANDLER
statement, tried to update some data through DML statement
while another connection tried to execute FLUSH TABLES WITH
READ LOCK concurrently.
What happened was that FTWRL in the second connection managed
to perform first step of GRL acquisition and thus blocked all
upcoming DML. After that it started to wait for table open
through HANDLER statement to be flushed. When the first connection
tried to execute DML it has started to wait for GRL/the second
connection creating deadlock.
The second bug manifested itself as starvation of FLUSH TABLES
WITH READ LOCK statements in cases when there was a constant
stream of concurrent DML statements (in two or more
connections).
This has happened because requests for protection against GRL
which were acquired by DML statements were ignoring presence of
pending GRL and thus the latter was starved.
This patch solves both these problems by re-implementing GRL
using metadata locks.
Similar to the old implementation acquisition of GRL in new
implementation is two-step. During the first step we block
all concurrent DML and DDL statements by acquiring global S
metadata lock (each DML and DDL statement acquires global IX
lock for its duration). During the second step we block commits
by acquiring global S lock in COMMIT namespace (commit code
acquires global IX lock in this namespace).
Note that unlike in old implementation acquisition of
protection against GRL in DML and DDL is semi-automatic.
We assume that any statement which should be blocked by GRL
will either open and acquires write-lock on tables or acquires
metadata locks on objects it is going to modify. For any such
statement global IX metadata lock is automatically acquired
for its duration.
The first problem is solved because waits for GRL become
visible to deadlock detector in metadata locking subsystem
and thus deadlocks like one in the first bug become impossible.
The second problem is solved because global S locks which
are used for GRL implementation are given preference over
IX locks which are acquired by concurrent DML (and we can
switch to fair scheduling in future if needed).
Important change:
FTWRL/GRL no longer blocks DML and DDL on temporary tables.
Before this patch behavior was not consistent in this respect:
in some cases DML/DDL statements on temporary tables were
blocked while in others they were not. Since the main use cases
for FTWRL are various forms of backups and temporary tables are
not preserved during backups we have opted for consistently
allowing DML/DDL on temporary tables during FTWRL/GRL.
Important change:
This patch changes thread state names which are used when
DML/DDL of FTWRL is waiting for global read lock. It is now
either "Waiting for global read lock" or "Waiting for commit
lock" depending on the stage on which FTWRL is.
Incompatible change:
To solve deadlock in events code which was exposed by this
patch we have to replace LOCK_event_metadata mutex with
metadata locks on events. As result we have to prohibit
DDL on events under LOCK TABLES.
This patch also adds extensive test coverage for interaction
of DML/DDL and FTWRL.
Performance of new and old global read lock implementations
in sysbench tests were compared. There were no significant
difference between new and old implementations.
ALTER TABLE RENAME, DISABLE KEYS.
The code of ALTER TABLE RENAME, DISABLE KEYS could
issue a commit while holding LOCK_open mutex.
This is a regression introduced by the fix for
Bug 54453.
This failed an assert guarding us against a potential
deadlock with connections trying to execute
FLUSH TABLES WITH READ LOCK.
The fix is to move acquisition of LOCK_open outside
the section that issues ha_autocommit_or_rollback().
LOCK_open is taken to protect against concurrent
operations with .frms and the table definition
cache, and doesn't need to cover the call to commit.
A test case added to innodb_mysql.test.
The patch is to be null-merged to 5.5, which
already has 54453 null-merged to it.
mysql-test/suite/innodb/r/innodb_mysql.result:
Added test results for test for bug#56619.
mysql-test/suite/innodb/t/innodb_mysql.test:
Added test for bug#56619.
sql/sql_table.cc:
mysql_alter_table() modified: moved acquisition of LOCK_open
after call to ha_autocommit_or_rollback.
ALTER TABLE RENAME, DISABLE KEYS.
The code of ALTER TABLE RENAME, DISABLE KEYS could
issue a commit while holding LOCK_open mutex.
This is a regression introduced by the fix for
Bug 54453.
This failed an assert guarding us against a potential
deadlock with connections trying to execute
FLUSH TABLES WITH READ LOCK.
The fix is to move acquisition of LOCK_open outside
the section that issues ha_autocommit_or_rollback().
LOCK_open is taken to protect against concurrent
operations with .frms and the table definition
cache, and doesn't need to cover the call to commit.
A test case added to innodb_mysql.test.
The patch is to be null-merged to 5.5, which
already has 54453 null-merged to it.
data dictionary confusion
On file systems with case insensitive file names, and
lower_case_table_names set to '2', the server could crash
due to a table definition cache inconsistency. This is
the default setting on MacOSX, but may also be set and
used on MS Windows.
The bug is caused by using two different strategies for
creating the hash key for the table definition cache, resulting
in failure to look up an entry which is present in the cache,
or failure to delete an existing entry. One strategy was to
use the real table name (with case preserved), and the other
to use a normalized table name (i.e a lower case version).
This is manifested in two cases. One is during 'DROP DATABASE',
where all known files are removed. The removal from
the table definition cache is done via a generated list of
TABLE_LIST with keys (wrongly) created using the case preserved
name. The other is during CREATE TABLE, where the cache lookup
is also (wrongly) based on the case preserved name.
The fix was to use only the normalized table name when
creating hash keys.
sql/sql_db.cc:
Normalize table name (i.e lower case it)
sql/sql_table.cc:
table_name contains the normalized name
alias contains the real table name
data dictionary confusion
On file systems with case insensitive file names, and
lower_case_table_names set to '2', the server could crash
due to a table definition cache inconsistency. This is
the default setting on MacOSX, but may also be set and
used on MS Windows.
The bug is caused by using two different strategies for
creating the hash key for the table definition cache, resulting
in failure to look up an entry which is present in the cache,
or failure to delete an existing entry. One strategy was to
use the real table name (with case preserved), and the other
to use a normalized table name (i.e a lower case version).
This is manifested in two cases. One is during 'DROP DATABASE',
where all known files are removed. The removal from
the table definition cache is done via a generated list of
TABLE_LIST with keys (wrongly) created using the case preserved
name. The other is during CREATE TABLE, where the cache lookup
is also (wrongly) based on the case preserved name.
The fix was to use only the normalized table name when
creating hash keys.
REBUILD PARTITION under LOCK TABLE
Collapsed patch including updates from the reviews.
In case of failure in ALTER ... PARTITION under LOCK TABLE
the server could crash, due to it had modified the locked
table object, which was not reverted in case of failure,
resulting in a bad table definition used after the failed
command.
Solved by instead of altering the locked table object and
its partition_info struct, creating an internal temporary
intermediate table object used for altering,
just like the non partitioned mysql_alter_table.
So if an error occur before the alter operation is complete,
the original table is not modified at all.
But if the alter operation have succeeded so far that it
must be completed as whole,
the table is properly closed and reopened.
(The completion on failure is done by the ddl_log.)
mysql-test/suite/parts/inc/partition_fail.inc:
Added tests under LOCK TABLE
mysql-test/suite/parts/r/partition_debug_innodb.result:
Updated results
mysql-test/suite/parts/r/partition_debug_myisam.result:
Updated results
mysql-test/suite/parts/r/partition_special_innodb.result:
updated result
mysql-test/suite/parts/t/partition_special_innodb.test:
changing comment, since this patch also fixes this.
sql/sql_partition.cc:
Added TODO, to use DBUG_SUICIDE() instead of abort()
to avoid core-files on expected crashes.
Removed unused arguments to fast_end_partition.
Opening a intermediate table in prep_alter_part_table, instead of altering
(a possible locked) normally opened table.
That way we do not have to do anything more than close
the intermediate table on error,
leaving the ordinary table opened and locked.
Also making sure that the intermediate table are
closed/destroyed on failure. If no error occur
it is later destroyed in the end of fast_alter_partition_table.
Added ha_external_lock to make sure MyISAM flushed the index file
after copying the partitions.
This also leads to removal of the special close and removal from
the table cache for other instances of the table.
sql/sql_partition.h:
Changed the arguments for prep_alter_part_table and
fast_alter_partition_table to use an intermediate table
instead of altering a (possibly locked) normal table.
sql/sql_table.cc:
Using an intermediate table created in prep_alter_part_table
to be used in fast_alter_partition_table, also closing/destroying
it on failure.
REBUILD PARTITION under LOCK TABLE
Collapsed patch including updates from the reviews.
In case of failure in ALTER ... PARTITION under LOCK TABLE
the server could crash, due to it had modified the locked
table object, which was not reverted in case of failure,
resulting in a bad table definition used after the failed
command.
Solved by instead of altering the locked table object and
its partition_info struct, creating an internal temporary
intermediate table object used for altering,
just like the non partitioned mysql_alter_table.
So if an error occur before the alter operation is complete,
the original table is not modified at all.
But if the alter operation have succeeded so far that it
must be completed as whole,
the table is properly closed and reopened.
(The completion on failure is done by the ddl_log.)
adding new indexes
A fast alter table requires that the existing (old) table
and indices are unchanged (i.e only new indices can be
added). To verify this, the layout and flags of the old
table/indices are compared for equality with the new.
The PACK_KEYS option is a no-op in InnoDB, but the flag
exists, and is used in the table compare. We need to
check this (table) option flag before deciding whether an
index should be packed or not. If the table has
explicitly set PACK_KEYS to 0, the created indices should
not be marked as packed/packable.
adding new indexes
A fast alter table requires that the existing (old) table
and indices are unchanged (i.e only new indices can be
added). To verify this, the layout and flags of the old
table/indices are compared for equality with the new.
The PACK_KEYS option is a no-op in InnoDB, but the flag
exists, and is used in the table compare. We need to
check this (table) option flag before deciding whether an
index should be packed or not. If the table has
explicitly set PACK_KEYS to 0, the created indices should
not be marked as packed/packable.
The problem was that RENAME TABLE caused an assert if the system variable
lower_case_table_names was 2 (default on Mac OS X) and the old table name
was given in upper case. This caused lowercase_table2.test to fail.
The assert checks that an exclusive metadata lock is held by the connection
trying to do RENAME TABLE - specificially during updates of table triggers.
The assert was triggered since the check is case sensitive and the lock
was held on the normalized (lower case) version of the table name.
This patch fixes the problem by making sure a normalized version of the
table name is used for the metadata lock check, while using a non-normalized
version of the table name for the rename of trigger files. The same is done
for ALTER TABLE ... RENAME.
Regression testing for the bug itself is already covered by
lowercase_table2.test. Additional coverage added to lowercase_fs_off.test.
The problem was that RENAME TABLE caused an assert if the system variable
lower_case_table_names was 2 (default on Mac OS X) and the old table name
was given in upper case. This caused lowercase_table2.test to fail.
The assert checks that an exclusive metadata lock is held by the connection
trying to do RENAME TABLE - specificially during updates of table triggers.
The assert was triggered since the check is case sensitive and the lock
was held on the normalized (lower case) version of the table name.
This patch fixes the problem by making sure a normalized version of the
table name is used for the metadata lock check, while using a non-normalized
version of the table name for the rename of trigger files. The same is done
for ALTER TABLE ... RENAME.
Regression testing for the bug itself is already covered by
lowercase_table2.test. Additional coverage added to lowercase_fs_off.test.
Fixed crashing bug when doing ALTER TABLE RENAME with transactional tables.
client/mysqltest.cc:
Added errno to error message for system calls (delete, rename etc)
Write error message for failures of system calls
mysql-test/include/cleanup_fake_relay_log.inc:
Disable warnings for remove_file
mysql-test/include/diff_tables.inc:
Disable warnings for remove_file
mysql-test/include/maria_empty_logs.inc:
Disable warnings for remove_file
mysql-test/include/maria_make_snapshot.inc:
Disable warnings for remove_file
mysql-test/include/maria_make_snapshot_for_feeding_recovery.inc:
Disable warnings for remove_file
mysql-test/include/mysqlhotcopy.inc:
Disable warnings for remove_file
mysql-test/include/ndb_backup.inc:
Disable warnings for remove_file
mysql-test/include/ndb_backup_print.inc:
Disable warnings for remove_file
mysql-test/r/alter_table_trans.result:
Test of crashing ALTER TABLE RENAME bug
mysql-test/t/alter_table_trans.test:
Test of crashing ALTER TABLE RENAME bug
mysql-test/t/mysqltest.test:
Disable warnings for remove_file and move_file
mysys/my_copy.c:
Fixed wrong error message
sql/sql_table.cc:
Fixed crashing bug when doing ALTER TABLE RENAME with transactional tables.
Made long file names from previous patch shorter
mysql-test/r/archive.result:
Added testing of repair (for upgrade) of 5.0 tables.
mysql-test/std_data/archive_5_0.ARM:
Archive table created in MySQL 5.0
mysql-test/std_data/archive_5_0.ARZ:
Archive table created in MySQL 5.0
mysql-test/std_data/archive_5_0.frm:
Archive table created in MySQL 5.0
mysql-test/std_data/long_table_name.MYD:
Made long file names shorter
mysql-test/std_data/long_table_name.MYI:
Made long file names shorter
mysql-test/std_data/long_table_name.frm:
Made long file names shorter
mysql-test/t/archive.test:
Added testing of repair (for upgrade) of 5.0 tables.
sql/sql_table.cc:
Allow recreate to open crashed tables.
sql/table.cc:
Fix error message if storage engine doesn't exists.
storage/archive/azio.c:
Reset status values in case archive is of old versions
storage/archive/ha_archive.cc:
Fix to allow one to open old versions of table during repair
Reset status variables for old version tables
If the the table is of old version, force upgrade with ALTER TABLE when doing repair
storage/archive/ha_archive.h:
Added variables to detect old versions
Fall back to use ALTER TABLE for engines that doesn't support REPAIR when doing repair for upgrade.
Nicer output from mysql_upgrade and mysql_check
Updated all arrays that used NAME_LEN to use SAFE_NAME_LEN to ensure that we don't break things accidently as names can now have a #mysql50# prefix.
client/mysql_upgrade.c:
If we are using verbose, also run mysqlcheck in verbose mode.
client/mysqlcheck.c:
Add more information if running in verbose mode
Print 'Needs upgrade' instead of complex error if table needs to be upgraded
Don't write connect information if verbose is not 2 or above
mysql-test/r/drop.result:
Updated test and results as we now support full table names
mysql-test/r/grant.result:
Now you get a correct error message if using #mysql with paths
mysql-test/r/show_check.result:
Update results as table names can temporarly be bigger than NAME_LEN (during upgrade)
mysql-test/r/upgrade.result:
Test upgrade for long table names.
mysql-test/suite/funcs_1/r/is_tables_is.result:
Updated old test result (had note been updated in a while)
mysql-test/t/drop.test:
Updated test and results as we now support full table names
mysql-test/t/grant.test:
Now you get a correct error message if using #mysql with paths
mysql-test/t/upgrade.test:
Test upgrade for long table names.
sql/ha_partition.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/item.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/log_event.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/mysql_priv.h:
Added SAFE_NAME_LEN
sql/rpl_filter.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sp.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sp_head.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_acl.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_base.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_connect.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_parse.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_prepare.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_select.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_show.cc:
NAME_LEN -> SAFE_NAME_LEN
Enlarge table names for SHOW TABLES to also include optional #mysql50#
sql/sql_table.cc:
Fall back to use ALTER TABLE for engines that doesn't support REPAIR when doing repair for upgrade.
sql/sql_trigger.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_udf.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_view.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/table.cc:
Fixed check_table_name() to not count #mysql50# as part of name
If #mysql50# is part of the name, don't allow path characters in name.
to allow temp table operations) -- prerequisite patch #3.
Rename open_temporary_table() to open_table_uncached().
open_temporary_table() will be introduced in following patches
to open temporary tables for a statement.
to allow temp table operations) -- prerequisite patch #3.
Rename open_temporary_table() to open_table_uncached().
open_temporary_table() will be introduced in following patches
to open temporary tables for a statement.
to allow temp table operations) -- prerequisite patch #2.
Introduce a new form of find_temporary_table() function:
find_temporary_table() by a table key. It will be used
in further patches.
Replace find_temporary_table(table_list->db, table_list->name)
by more appropiate find_temporary_table(table_list) across
the codebase.
to allow temp table operations) -- prerequisite patch #2.
Introduce a new form of find_temporary_table() function:
find_temporary_table() by a table key. It will be used
in further patches.
Replace find_temporary_table(table_list->db, table_list->name)
by more appropiate find_temporary_table(table_list) across
the codebase.
- Changed to still use bcmp() in certain cases becasue
- Faster for short unaligneed strings than memcmp()
- Bettern when using valgrind
- Changed to use my_sprintf() instead of sprintf() to get higher portability for old systems
- Changed code to use MariaDB version of select->skip_record()
- Removed -%::SCCS/s.% from Makefile.am:s to remove automake warnings
The ALTER PARTITION and SELECT seemed to be deadlocked
when having innodb_thread_concurrency = 1.
Problem was that there was unreleased latches
in the ALTER PARTITION thread which was needed
by the SELECT thread to be able to continue.
Solution was to release the latches by commit
before requesting upgrade to exclusive MDL lock.
Updated according to reviewers comments (3).
mysql-test/r/partition_innodb.result:
updated test result
mysql-test/t/partition_innodb.test:
added test
sql/sql_partition.cc:
Moved implicit commit into mysql_change_partition
so that if latches are taken, they are always released
before waiting on exclusive lock.
sql/sql_table.cc:
refactored the code to prepare and commit
around copy_data_between_tables, to be able
to reuse it in mysql_change_partitions
sql/sql_table.h:
exporting mysql_trans_prepare/commit_alter_copy_data
The ALTER PARTITION and SELECT seemed to be deadlocked
when having innodb_thread_concurrency = 1.
Problem was that there was unreleased latches
in the ALTER PARTITION thread which was needed
by the SELECT thread to be able to continue.
Solution was to release the latches by commit
before requesting upgrade to exclusive MDL lock.
Updated according to reviewers comments (3).
temp table
This patch introduces two key changes in the replication's behavior.
Firstly, it reverts part of BUG#51894 which puts any update to temporary tables
into the trx-cache. Now, updates to temporary tables are handled according to
the type of their engines as a regular table.
Secondly, an unsafe mixed statement, (i.e. a statement that access transactional
table as well non-transactional or temporary table, and writes to any of them),
are written into the trx-cache in order to minimize errors in the execution when
the statement logging format is in use.
Such changes has a direct impact on which statements are classified as unsafe
statements and thus part of BUG#53259 is reverted.
temp table
This patch introduces two key changes in the replication's behavior.
Firstly, it reverts part of BUG#51894 which puts any update to temporary tables
into the trx-cache. Now, updates to temporary tables are handled according to
the type of their engines as a regular table.
Secondly, an unsafe mixed statement, (i.e. a statement that access transactional
table as well non-transactional or temporary table, and writes to any of them),
are written into the trx-cache in order to minimize errors in the execution when
the statement logging format is in use.
Such changes has a direct impact on which statements are classified as unsafe
statements and thus part of BUG#53259 is reverted.
'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#47132, BUG#47442, BUG49494, BUG#23992 and BUG#48814 will disappear
automatically after the this patch.
BUG#55617 is fixed by this patch too.
This is the 5.5 part.
It implements:
- 'CREATE TABLE IF NOT EXISTS ... SELECT' statement will not insert
anything and binlog anything if the table already exists.
It only generate a warning that table already exists.
- A couple of test cases for the behavior changing.
'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#47132, BUG#47442, BUG49494, BUG#23992 and BUG#48814 will disappear
automatically after the this patch.
BUG#55617 is fixed by this patch too.
This is the 5.5 part.
It implements:
- 'CREATE TABLE IF NOT EXISTS ... SELECT' statement will not insert
anything and binlog anything if the table already exists.
It only generate a warning that table already exists.
- A couple of test cases for the behavior changing.
locks on the table
Fixing the partitioning specifics after TRUNCATE TABLE in
bug-42643 was fixed.
Reorganize of code to decrease the size of the giant switch
in mysql_execute_command, and to prepare for future parser
reengineering. Moved code into Sql_statement objects.
Updated patch according to davi's review comments.
libmysqld/CMakeLists.txt:
Added new files.
libmysqld/Makefile.am:
Added new files.
mysql-test/r/not_partition.result:
now returning error on partitioning commands
if partitioning is not enabled.
mysql-test/r/partition_disabled.result:
There is no partition handlerton, so it cannot
find the specified engine in the .frm file.
mysql-test/r/partition_truncate.result:
Updated test results.
mysql-test/suite/parts/inc/partition_mgm.inc:
Added check that TRUNCATE PARTITION does not delete on failure.
mysql-test/suite/parts/r/partition_debug_sync_innodb.result:
updated results.
mysql-test/suite/parts/r/partition_mgm_lc0_archive.result:
updated results.
mysql-test/suite/parts/r/partition_mgm_lc1_archive.result:
updated results.
mysql-test/suite/parts/r/partition_mgm_lc2_archive.result:
updated results.
mysql-test/suite/parts/t/partition_debug_sync_innodb.test:
Test case for this bug.
mysql-test/t/not_partition.test:
Added check for TRUNCATE PARTITION without partitioning.
mysql-test/t/partition_truncate.test:
Added test of TRUNCATE PARTITION on non partitioned table.
sql/CMakeLists.txt:
Added new files.
sql/Makefile.am:
Added new files.
sql/datadict.cc:
Moved out the storage engine check into an own
function, including assert for lock.
sql/datadict.h:
added dd_frm_storage_engine.
sql/sql_alter_table.cc:
moved the code for SQLCOM_ALTER_TABLE in mysql_execute_command
into its own file, and using the Sql_statement object to
prepare for future parser reengineering.
sql/sql_alter_table.h:
Created Sql_statement object for ALTER TABLE.
sql/sql_lex.cc:
resetting m_stmt.
sql/sql_lex.h:
Temporary hack for forward declaration of enum_alter_table_change_level.
sql/sql_parse.cc:
Moved out ALTER/ANALYZE/CHECK/OPTIMIZE/REPAIR TABLE
from the giant switch into their own Sql_statement
objects.
sql/sql_parse.h:
Exporting check_merge_table_access.
sql/sql_partition_admin.cc:
created Sql_statement for
ALTER TABLE t ANALYZE/CHECK/OPTIMIZE/REPAIR/TRUNCATE
PARTITION. To be able to reuse the TABLE equivalents.
sql/sql_partition_admin.h:
Added Sql_statement of partition admin statements.
sql/sql_table.cc:
Moved table maintenance code into sql_table_maintenance.cc
sql/sql_table.h:
Moved table maintenance code into sql_table_maintenance.h
exporting functions used by sql_table_maintenance.
sql/sql_table_maintenance.cc:
Moved table maintenance code from sql_table.cc
sql/sql_table_maintenance.h:
Sql_statement objects for ANALYZE/CHECK/OPTIMIZE/REPAIR TABLE.
Also declaring the keycache functions.
sql/sql_truncate.cc:
Moved code from SQLCOM_TRUNCATE in mysql_execute_command into
Truncate_statement::execute.
Added check for partitioned table on TRUNCATE PARTITION.
Moved locking fix for partitioned table into
Alter_table_truncate_partition::execute.
sql/sql_truncate.h:
Truncate_statement declaration (sub class of Sql_statement).
sql/sql_yacc.yy:
Using the new Sql_statment objects.
locks on the table
Fixing the partitioning specifics after TRUNCATE TABLE in
bug-42643 was fixed.
Reorganize of code to decrease the size of the giant switch
in mysql_execute_command, and to prepare for future parser
reengineering. Moved code into Sql_statement objects.
Updated patch according to davi's review comments.
corruption on ADD PARTITION and LOCK TABLE
Bug#53770: Server crash at handler.cc:2076 on
LOAD DATA after timed out COALESCE PARTITION
5.5 fix for:
Bug#51042: REORGANIZE PARTITION can leave table in an
inconsistent state in case of crash
Needs to be back-ported to 5.1
5.5 fix for:
Bug#50418: DROP PARTITION does not interact with
transactions
Main problem was non-persistent operations done
before meta-data lock was taken (53770+53676).
And 53676 needed to keep the table/partitions opened and locked
while copying the data to the new partitions.
Also added thorough tests to spot some additional bugs
in the ddl_log code, which could result in bad state
between the .frm and partitions.
Collapsed patch, includes all fixes required from the reviewers.
mysql-test/r/partition_innodb.result:
updated result with new test
mysql-test/suite/parts/inc/partition_crash.inc:
crash test include file
mysql-test/suite/parts/inc/partition_crash_add.inc:
test all states in fast_alter_partition_table
ADD PARTITION branch
mysql-test/suite/parts/inc/partition_crash_change.inc:
test all states in fast_alter_partition_table
CHANGE PARTITION branch
mysql-test/suite/parts/inc/partition_crash_drop.inc:
test all states in fast_alter_partition_table
DROP PARTITION branch
mysql-test/suite/parts/inc/partition_fail.inc:
recovery test including injecting errors
mysql-test/suite/parts/inc/partition_fail_add.inc:
test all states in fast_alter_partition_table
ADD PARTITION branch
mysql-test/suite/parts/inc/partition_fail_change.inc:
test all states in fast_alter_partition_table
CHANGE PARTITION branch
mysql-test/suite/parts/inc/partition_fail_drop.inc:
test all states in fast_alter_partition_table
DROP PARTITION branch
mysql-test/suite/parts/inc/partition_mgm_crash.inc:
include file that runs all crash and failure injection tests.
mysql-test/suite/parts/r/partition_debug_innodb.result:
new test result file
mysql-test/suite/parts/r/partition_debug_myisam.result:
new test result file
mysql-test/suite/parts/r/partition_special_innodb.result:
updated result
mysql-test/suite/parts/r/partition_special_myisam.result:
updated result
mysql-test/suite/parts/t/partition_debug_innodb-master.opt:
opt file for using with crashing tests of partitioned innodb
mysql-test/suite/parts/t/partition_debug_innodb.test:
partitioned innodb test that require debug builds
mysql-test/suite/parts/t/partition_debug_myisam-master.opt:
opt file for using with crashing tests of partitioned myisam
mysql-test/suite/parts/t/partition_debug_myisam.test:
partitioned myisam test that require debug builds
mysql-test/suite/parts/t/partition_special_innodb-master.opt:
added innodb-file-per-table to easier verify partition status on disk
mysql-test/suite/parts/t/partition_special_innodb.test:
added test case
mysql-test/suite/parts/t/partition_special_myisam.test:
added test case
mysql-test/t/partition_innodb.test:
added test case
sql/sql_base.cc:
Moved alter_close_tables to sql_partition.cc
sql/sql_base.h:
removed some non existing and duplicated functions.
sql/sql_partition.cc:
fast_alter_partition_table:
Spletted abort_and_upgrad_lock_and_close_table
to its parts (wait_while_table_is_used and
alter_close_tables) and always have
wait_while_table_is_used before any persistent
operations (including logs, which will be executed
on failure) and alter_close_tables after
create/read/write operations and before
drop operations.
moved alter_close_tables here from sql_base.cc
Added error injections for better test coverage.
write_log_final_change_partition:
fixed a log_entry linking bug (delete_frm was not
linked to change/drop partition)
and drop partition must be executed before
change partition (change partition can rename a
partition to an old name, like REORG p1 INTO (p1,p2).
write_log_add_change_partition:
need to use drop_frm first, and relinking that entry
and reusing its execute entry.
sql/sql_table.cc:
added initialization of next_active_log_entry.
sql/table.h:
removed a duplicate declaration.
corruption on ADD PARTITION and LOCK TABLE
Bug#53770: Server crash at handler.cc:2076 on
LOAD DATA after timed out COALESCE PARTITION
5.5 fix for:
Bug#51042: REORGANIZE PARTITION can leave table in an
inconsistent state in case of crash
Needs to be back-ported to 5.1
5.5 fix for:
Bug#50418: DROP PARTITION does not interact with
transactions
Main problem was non-persistent operations done
before meta-data lock was taken (53770+53676).
And 53676 needed to keep the table/partitions opened and locked
while copying the data to the new partitions.
Also added thorough tests to spot some additional bugs
in the ddl_log code, which could result in bad state
between the .frm and partitions.
Collapsed patch, includes all fixes required from the reviewers.
A label statement needs to be followed by at least
one primary expression. If built without
WITH_PARTITION_STORAGE_ENGINE set, the block would
be empty.
Added ';' as a dummy statement to fix it.
A label statement needs to be followed by at least
one primary expression. If built without
WITH_PARTITION_STORAGE_ENGINE set, the block would
be empty.
Added ';' as a dummy statement to fix it.
