Modern compilers (such as GCC 8) emit warnings that the
'register' keyword is deprecated and not valid C++17.
Let us remove most use of the 'register' keyword.
Code in 'extra/' is not touched.
numerous fixes for CREATE ... SELECT with system versioning:
In CREATE ... SELECT the table is created based on the result set,
field properties do not count. That is
* field invisibility is *not* copied over
* AS ROW START/END is *not* copied over
* the history is *not* copied over
* system row_start/row_end fields can *not* be created from the SELECT part
vers_setup_conds() used to AND all conditions on row_start/row_end
columns and store it either in the WHERE clause or in the ON
clause for some table. In some cases this caused ON clause
to have conditions for tables that aren't part of that ON's join.
Fixed to put a table's condition always in the ON clause of the
corresponding table.
Removed unnecessary ... `OR row_end IS NULL` clause, it's not needed
in the ON clause.
Simplified handling on PS and SP.
SELECT queries on information_schema table will now not store data
in the temporary table for columns that are not used in the query.
This can drastically reduce memory when there are many rows involved
in a query, like using
SELECT table_name FROM information_schema.table
on a system with many tables.
The difference for the above query is about 14K per existing table.
The code works this way:
- Create a bitmap for all information_schema fields used in the query
- For BLOB and VARCHAR fields that are not use, create a Field_null field.
is not supported
Allowed to use recursive references in derived tables.
As a result usage of recursive references in operands of
INTERSECT / EXCEPT is now supported.
enum_mark_columns -> enum_column_usage
mark_used_columns -> column_usage
further commits will replace MARK_COLUMN_NONE with
COLUMN_READ and COLUMN_WRITE that convey the intention
without causing columns to be marked
no matching operator delete found; memory will not be freed if initialization throws an exception
Added a no-op delete() for MEM_ROOT based placement-new()
Handle string length as size_t, consistently (almost always:))
Change function prototypes to accept size_t, where in the past
ulong or uint were used. change local/member variables to size_t
when appropriate.
This fix excludes rocksdb, spider,spider, sphinx and connect for now.
This will make it easier to how memory allocation is done when debugging
with either DBUG or gdb.
Will especially help when debugging stored procedures
Main change is a name argument as second argument to init_alloc_root()
init_sql_alloc()
Other things:
- Added DBUG_ENTER/EXIT to some Virtual_tmp_table functions
Counter for select numbering made stored with the statement (before was global)
So now it does have always accurate value which does not depend on
interruption of statement prepare by errors like lack of table in
a view definition.
This was done in, among other things:
- thd->db and thd->db_length
- TABLE_LIST tablename, db, alias and schema_name
- Audit plugin database name
- lex->db
- All db and table names in Alter_table_ctx
- st_select_lex db
Other things:
- Changed a lot of functions to take const LEX_CSTRING* as argument
for db, table_name and alias. See init_one_table() as an example.
- Changed some function arguments from LEX_CSTRING to const LEX_CSTRING
- Changed some lists from LEX_STRING to LEX_CSTRING
- threads_mysql.result changed because process list_db wasn't always
correctly updated
- New append_identifier() function that takes LEX_CSTRING* as arguments
- Added new element tmp_buff to Alter_table_ctx to separate temp name
handling from temporary space
- Ensure we store the length after my_casedn_str() of table/db names
- Removed not used version of rename_table_in_stat_tables()
- Changed Natural_join_column::table_name and db_name() to never return
NULL (used for print)
- thd->get_db() now returns db as a printable string (thd->db.str or "")
After MDEV-14212, the Virtual_tmp_table instance that stores a ROW
variable elements is accessible from the underlying Field_row
(rather than Item_field_row).
This patch makes some further changes by moving the code from
sp_instr_xxx, sp_rcontext, Item_xxx to Virtual_tmp_table and Field_xxx.
The data type specific code (scalar vs ROW) now resides in
a new virtual method Field_xxx::sp_prepare_and_store_item().
The the code in sp_rcontext::set_variable() and sp_eval_expr()
is now symmetric for scalar and ROW values.
The code in sp_rcontext::set_variable_row_field(), sp_rcontext::set_variable_row_field(), sp_rcontext::set_variable_row()
is now symmetric for ROW elements (i.e. scalar and ROW elements inside a ROW).
Rationale:
Prepare the code to implement these tasks soon easier:
- MDEV-12252 ROW data type for stored function return values
- MDEV-12307 ROW data type for built-in function return values
- MDEV-6121 Data type: Array
- MDEV-10593 sql_mode=ORACLE: TYPE .. AS OBJECT: basic functionality
- ROW with ROW fields (no MDEV yet)
Details:
1. Moving the code in sp_eval_expr() responsible to backup/restore
thd->count_cuted_fields, thd->abort_on_warning,
thd->transaction.stmt.modified_non_trans_table
into a new helper class Sp_eval_expr_state, to reuse it easier.
Fixing sp_eval_expr() to use this new class.
2. Moving sp_eval_expr() and sp_prepare_func_item() from public functions
to methods in THD, so they can be reused in *.cc files easier without
a need to include "sp_head.h".
Splitting sp_prepare_func_item() into two parts.
Adding a new function sp_fix_func_item(), which fixes
the underlying items, but does not do check_cols() for them.
Reusing sp_fix_func_item() in Field_row::sp_prepare_and_store_item().
3. Moving the code to find ROW fields by name from Item to Virtual_tmp_table
Moving the code searching for ROW fields by their names
from Item_field_row::element_index_by_name() to a new method
Item_field_row to Virtual_tmp_table::sp_find_field_by_name().
Adding wrapper methods sp_rcontext::find_row_field_by_name() and
find_row_field_by_name_or_error(), to search for a ROW variable
fields by the variable offset and its field name.
Changing Item_splocal_row_field_by_name::fix_fields() to do
use sp_rcontext::find_row_field_by_name_or_error().
Removing virtual Item::element_index_by_name().
4. Splitting sp_rcontext::set_variable()
Adding a new virtual method Field::sp_prepare_and_store_item().
Spliting the two branches of the code in sp_rcontext::set_variable()
into two virtual implementations of Field::sp_prepare_and_store_item(),
(for Field and for Field_row).
Moving the former part of sp_rcontext::set_variable() with the loop
doing set_null() for all ROW fields into a new method
Virtual_tmp_table::set_all_fields_to_null() and using it in
Field_row::sp_prepare_and_store_item().
Moving the former part of sp_rcontext::set_variable() with the loop
doing set_variable_row_field() into a new method
Virtual_tmp_table::set_all_fields_from_item() and using it in
Field_row::sp_prepare_and_store_item().
The loop in the new method now uses sp_prepare_and_store_item()
instead of set_variable_row_field(), because saving/restoring
THD flags is now done on the upper level. No needs to save/restore
on every iteration.
5. Fixing sp_eval_expr() to simply do two things:
- backup/restore THD flags
- call result_field->sp_prepare_and_store_item()
So now sp_eval_expr() can be used for both scalar and ROW variables.
Reusing it in sp_rcontext::set_variable*().
6. Moving the loop in sp_rcontext::set_variable_row() into a
new method Virtual_tmp_table::sp_set_all_fields_from_item_list().
Changing the loop body to call field->sp_prepare_and_store_item()
instead of doing set_variable_row_field(). This removes
saving/restoring of the THD flags from every interation.
Instead, adding the code to save/restore the flags around
the entire loop in set_variable_row(), using Sp_eval_expr_state.
So now saving/restoring is done only once for the entire ROW
(a slight performance improvement).
7. Removing the code in sp_instr_set::exec_core() that sets
a variable to NULL if the value evaluation failed.
sp_rcontext::set_variable() now makes sure to reset
the variable properly by effectively calling sp_eval_expr(),
which calls virtual Field::sp_prepare_and_store_item().
Removing the similar code from sp_instr_set_row_field::exec_core()
and sp_instr_set_row_field_by_name::exec_core().
Removing the method sp_rcontext::set_variable_row_field_to_null(),
as it's not used any more.
8. Removing the call for sp_prepare_func_item() from
sp_rcontext::set_variable_row_field(), as it was duplicate:
it was done inside sp_eval_expr(). Now it's done inside
virtual Field::sp_prepare_and_store_item().
9. Moving the code from sp_instr_set_row_field_by_name::exec_core()
into sp_rcontext::set_variable_row_field_by_name(), for symmetry
with other sp_instr_set*::exec_core()/sp_rcontext::set_variable*() pairs.
Now sp_instr_set_row_field_by_name::exec_core() calls
sp_rcontext::set_variable_row_field_by_name().
10. Misc:
- Adding a helper private method sp_rcontext::virtual_tmp_table_for_row(),
reusing it in a new sp_rcontext methods.
- Removing Item_field_row::get_row_field(), as it's not used any more.
- Removing the "Item *result_item" from sp_eval_expr(),
as it's not needed any more.
MDEV-14957: JOIN::prepare gets unusable "conds" as argument
Do not touch merged derived (it is irreversible)
Fix first argument of in_optimizer for calls possible before fix_fields()
The assertion failure was caused by an incorrectly set read_set for
functions in the ORDER BY clause in part of a union, when we are using
a mergeable view and the order by clause can be skipped (removed).
An order by clause can be skipped if it's part of one part of the UNION as
the result set is not meaningful when multiple SELECT queries are UNIONed. The
server is aware of this optimization and tries to remove the order by
clause before JOIN::prepare. The problem is that we need to throw an
error when the ORDER BY clause contains invalid columns. To do this, we
attempt resolving the ORDER BY expressions, then subsequently drop them
if resolution succeeded. However, ORDER BY resolution had the side
effect of adding the expressions to the all_fields list, which is used
to construct temporary tables to store the result. We may be ignoring
the ORDER BY statement, but the tmp table still tried to compute the
values for the expressions, even if the columns are never used.
The assertion only shows itself if the order by clause contains members
which were not previously in the select list, and are part of a
function.
There is an additional question as to why this only manifests when using
VIEWS and not when using a regular table. The difference lies with the
"reset" of the read_set for the temporary table during
SELECT_LEX::update_used_tables() in JOIN::optimize(). The changes
introduced in fdf789a7ea cleared the
read_set when a mergeable view is encountered in the TABLE_LIST
defintion.
Upon initial order_list resolution, the table's read_set is updated
correctly. JOIN::optimize() will only reset the read_set if it
encounters a VIEW. Since we no longer have ORDER BY clause in
JOIN::optimize() we never get to correctly update the read_set again.
Other relevant commit by Timour, which first introduced the order
resolution when we "can_skip_sort_order":
883af99e7d
Solution:
Don't add the resolved ORDER BY elements to all_fields. We only resolve
them to check if an error should be returned for the query. Ignore them
completely otherwise.
join_tab->distinct=true means "Before doing record read with this
join_tab, call join_tab->remove_duplicates() to eliminate duplicates".
remove_duplicates() assumes that
- there is a temporary table $T with rows that are to be de-duplicated
- there is a previous join_tab (e.g. with join_tab->fields) which was
used to populate the temp.table $T.
When the query has "Impossible WHERE" and window function, then the above
conditions are not met (but we still might need a window function
computation step when the query has implicit grouping).
The fix is to not add remove_duplicates step if the select execution is
degenerate (and we'll have at most one row in the output anyway).
TRASH was mapped to TRASH_FREE and was supposed to be used for memory
that should not be accessed anymore, while TRASH_ALLOC() is to be
used for uninitialized but to-be-used memory.
But sometimes TRASH() was used in the latter sense.
Remove TRASH() macro, always use explicit TRASH_ALLOC() or TRASH_FREE().
In this case we were using the optimization derived_with_keys but we could not create a key
because the length of the key was greater than the max allowed(MI_MAX_KEY_LENGTH).
To do the join we needed to create a hash join key instead, but in the explain output it
showed that we were still referring to derived keys which were created but not used.
In the function JOIN::shrink_join_buffers the iteration over joined
tables was organized in a wrong way. This could cause a crash if
the optimizer chose to materialize a semi-join that used join caches
for which the sizes must be adjusted.
This reverts commit 7069071d7d
And add a test to show that optimization steps that
a) are repeated for every execution
b) create new items
cannot be done on the statement arena
* get_rec_bits() was always reading two bytes, even if the
bit field contained only of one byte
* In various places the code used field->pack_length() bytes
starting from field->ptr, while it should be field->pack_length_in_rec()
* Field_bit::key_cmp and Field_bit::cmp_max passed field_length as
an argument to memcmp(), but field_length is the number of bits!
