executing undo undo_key_delete" upon startup on datadir restored from
incremental backup
aria_log* files were not copied on --prepare --incremental-dir step from
incremental to destination backup directory.
buf_read_ibuf_merge_pages(): Discard any page numbers that are
outside the current bounds of the tablespace, by invoking the
function ibuf_delete_recs() that was introduced in MDEV-20934.
This could avoid an infinite change buffer merge loop on
innodb_fast_shutdown=0, because normally the change buffer merge
would only be attempted if a page was successfully loaded into
the buffer pool.
dict_drop_index_tree(): Add the parameter trx_t*.
To prevent the DROP TABLE crash, do not invoke btr_free_if_exists()
if the entire .ibd file will be dropped. Thus, we will avoid a crash
if the BTR_SEG_LEAF or BTR_SEG_TOP of the index is corrupted,
and we will also avoid unnecessarily accessing the to-be-dropped
tablespace via the buffer pool.
In MariaDB 10.2, we disable the DROP TABLE fix if innodb_safe_truncate=0,
because the backup-unsafe MySQL 5.7 WL#6501 form of TRUNCATE TABLE
requires that the individual pages be freed inside the tablespace.
Move row size check to early CREATE/ALTER TABLE phase. Stop checking
on table open.
dict_index_add_to_cache(): remove parameter 'strict', stop checking row size
dict_index_t::record_size_info_t: this is a result of row size check operation
create_table_info_t::row_size_is_acceptable(): performs row size check.
Issues error or warning. Writes first overflow field to InnoDB log.
create_table_info_t::create_table(): add row size check
dict_index_t::record_size_info(): this is a refactored version
of dict_index_t::rec_potentially_too_big(). New version doesn't change global
state of a program but return all interesting info. And it's callers who
decide how to handle row size overflow.
dict_index_t::rec_potentially_too_big(): removed
Problem:
========
CURRENT_TEST: binlog_encryption.rpl_corruption
mysqltest: In included file "./include/wait_for_slave_io_error.inc":
...
At line 72: Slave stopped with wrong error code
**** Slave stopped with wrong error code: 1743 (expected 1595,1913) ****
Analysis:
========
The test emulates the corruption at the various stages of replication for
example in binlog file, in network and in relay log etc. It verifies that all
corruption cases are handled through appropriate error messages.
The test cases which emulate network failure expect following errors.
--ER_SLAVE_RELAY_LOG_WRITE_FAILURE (1595)
--ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE (1743)
Ideally test should expect error codes as 1595 and 1743.
But the test actually waits on incorrect error code 1595,1913
Fix:
===
Added appropriate error code for 'ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE'.
Replaced 1913 with 1743.
The assert indicates that the current transaction got caught uncleaned from
the semisync master's cache when it is signaled to proceed upon its
ack receive.
The reason of missed cleanup turns out to be a flaw in the gtid
connect mode.
A submitted by connecting slave value of its last received event's
binlog file *name* was adopted into
{{Repl_semi_sync_master::m_reply_file_name}} as a part of semisync
initialization.
Notice that the initialization still refines the position part of the
submitted last received event's binlog coordinates.
The master side binlog filename:pos refinement is
specific to the gtid connect mode for purpose of computing the latest
binlog file to resume slave feeding from.
Effectively in the gtid connect mode the computed resumption filename:pos
may appear smaller in which case a new post-connect time committing
transaction may be logged with its filename:pos also less than the
submitted coordinates and that triggers the assert.
Fixed with making the semisync initialization to use the refined filename:pos.
It is guaranteed to be less than any new generated transaction's binlog:pos.
Due to a data corruption bug that may have occurred a long time earlier
(possibly involving physical backup and MySQL Bug #69122, which was
addressed in commit f166ec71b7)
it seems possible that the InnoDB change buffer might end up containing
entries, while no buffered changes exist according to the change buffer
bitmap pages in the .ibd files.
ibuf_delete_recs(): New function, to be invoked on slow shutdown only.
Remove all buffered changes for a specific page.
ibuf_merge_or_delete_for_page(): If the change buffer bitmap is clean
and a slow shutdown is in progress, invoke ibuf_delete_recs().
We do not want to do that during normal operation, due to the additional
overhead that is involved. The bitmap page should be consistent with
the change buffer in the first place.
InnoDB: Assertion failure in file .../dict/dict0dict.cc line ...
InnoDB: Failing assertion: table->can_be_evicted
This fixes a regression that was caused by the fix of MDEV-20621
(commit a41d429765).
MySQL 5.6 (and MariaDB 10.0) introduced eviction of tables from
the InnoDB data dictionary cache. Tables that are connected to
FOREIGN KEY constraints or FULLTEXT INDEX are exempt of the eviction.
With the problematic change, a table that would already be exempt
from eviction due to FOREIGN KEY would cause the problem if there
also was a FULLTEXT INDEX defined on it.
dict_load_table(): Only prevent eviction if table->can_be_evicted holds.
Unfortunate DROP TEMPORARY..IF EXISTS on a regular table may allow
subsequent CREATE TABLE statements to steal away the PFS_table_share
instance from the dropped table.
mysql_insert() first opens all affected tables (which implicitly
starts a transaction in InnoDB), then stat tables.
A failure to open a stat table caused open_tables() to abort
the current stmt transaction (trans_rollback_stmt()). So, from the
server point of view the following ha_write_row()-s happened outside
of a transactions, and the server didn't bother to commit them.
The server has a mechanism to prevent a transaction being
unexpectedly committed or rolled back in the middle of a statement -
if an operation takes place _in a sub-statement_ it cannot change
the transaction state. Operations on stat tables are exactly that -
they are not allowed to change a transaction state. Put them in
a sub-statement to make sure they don't.
Apply the changes to InnoDB and XtraDB that had been
inadvertently skipped in the merge
commit ae476868a5
That merge failure sabotaged part of MDEV-20127:
>Revert a problematic auto_increment_increment 'fix' from 2014.
>This involves replacing the MDEV-8827 fix and in 10.1,
>removing some WSREP instrumentation.
The code changes were re-merged manually by executing the following:
# Get the parent of the problematic merge.
git checkout ae476868a5394041a00e75a29c7d45917e8dfae8^
# Perform the merge again.
git merge ae476868a5394041a00e75a29c7d45917e8dfae8^2
# Get the conflict resolution from that merge.
git checkout ae476868a5 .
# Note: Any changes to these files were removed (empty diff)!
git diff HEAD storage/{innobase,xtradb}/handler/ha_innodb.cc
# Apply the code changes:
git diff cf40393471b10ca68cc1d2804c22ab9203900978^2..MERGE_HEAD \
storage/{innobase,xtradb}/handler/ha_innodb.cc|
patch -p1
InnoDB stores synced_doc_id + 1 value in FTS_CONFIG table. But
while reading the synced doc id from FTS_CONFIG table after restart,
InnoDB should read synced_doc_id - 1 to get the actual synced
doc id value.
To diagnose a hang in slow shutdown (innodb_fast_shutdown=0),
let us introduce a Boolean startup option in debug builds
that will cause the contents of the InnoDB change buffer
to be dumped to the server error log at startup.
MDEV-18451 Server crashes in maria_create_trn_for_mysql
upon ALTER TABLE
Problem was that when table was locked many times, not all
instances where removed from the transaction by
_ma_remove_table_from_trnman()
Problem was in a combination of LOCK TABLES on several Aria
tables followed by an ALTER TABLE. After the ALTER TABLE there
was a force close + reopen of the alter table. The close failed
because the table was still part of a transaction.
Fixed by calling extra(HA_EXTRA_PREPARE_FOR_FORCED_CLOSE) as
part of closing the table, which ensures that the table is not
anymore part of the current transaction.
Remove unused variables and type mismatch that was introduced
in commit b393e2cb0c
Also, fix a typo in the documentation of the parameter, and
update the test.
Apply the correct pattern for debug instrumentation:
SET @save_dbug=@@debug_dbug;
SET debug_dbug='+d,...';
...
SET debug_dbug=@save_dbug;
Numerous tests use statements of the form
SET debug_dbug='-d,...';
which will inadvertently enable all DBUG tracing output,
causing unnecessary waste of resources.
Analysis
Mysqlbinlog output for encrypted binary log
#Q> insert into tab1 values (3,'row 003')
#190912 17:36:35 server id 10221 end_log_pos 980 CRC32 0x53bcb3d3 Table_map: `test`.`tab1` mapped to number 19
# at 940
#190912 17:36:35 server id 10221 end_log_pos 1026 CRC32 0xf2ae5136 Write_rows: table id 19 flags: STMT_END_F
Here we can see Table_map_log_event ends at 980 but Next event starts at 940.
And the reason for that is we do not send START_ENCRYPTION_EVENT to the slave
Solution:-
Send Start_encryption_log_event as Ignorable_log_event to slave(mysqlbinlog),
So that mysqlbinlog can update its log_pos.
Since Slave can request multiple FORMAT_DESCRIPTION_EVENT while master does not
have so We only update slave master pos when master actually have the
FORMAT_DESCRIPTION_EVENT. Similar logic should be applied for START_ENCRYPTION_EVENT.
Also added the test case when new server reads the data from old server which
does not send START_ENCRYPTION_EVENT to slave.
Master Slave Upgrade Scenario.
When Slave is updated first, Slave will have extra logic of handling
START_ENCRYPTION_EVENT But master willnot be sending START_ENCRYPTION_EVENT.
So there will be no issue.
When Master is updated first, It will send START_ENCRYPTION_EVENT to
slave , But slave will ignore this event in queue_event.
When "--export" mariabackup option is used, mariabackup starts the server in
bootstrap mode to generate *.cfg files for the certain innodb tables.
The started instance of the server reads options from the file, pointed
out in "--defaults-file" mariabackup option.
If the server uses the same config file as mariabackup, and binlog is
switched on in that config file, then "mariabackup --prepare --export"
will create binary log files in the server's binary log directory, what
can cause issues.
The fix is to add "--skip-log-bin" in mysld options when the server is
started to generate *.cfg files.
Analysis:
========
In general if there are three groups.
1 - Inserts 32 which fails due to local entry '32' on slave.
2 - Inserts 33
3 - Inserts 34
Each group considers itself as a waiter and it waits for prior group 'waitee'.
This is done in 'register_wait_for_prior_event_group_commit'. If there is no
other parallel group being scheduled then no waitee will be there.
Let us assume 3 groups are being scheduled in parallel.
3-> waits for 2-> waits for->1
'1' upon completion it checks is there any registered subsequent waiter. If
so it wakes up the subsequent waiter with its execution status. This execution
status is stored in wakeup_error.
If '1' failed then it sends corresponding wakeup_error to 2. Then '2' aborts
and it propagates error to '3'. So all further commits are aborted. This
mechanism works only when all transactions reach a stage where they are
waiting for their prior commit to complete.
In case of optimistic following scenario occurs.
1,2,3 are scheduled in parallel.
3 - Reaches group_commit_code waits for 2 to complete.
1 - errors out sets stop_on_error_sub_id=1.
When a group execution results in error its corresponding sub_id is set to
'stop_on_error_sub_id'. Any new groups queued for execution will check if
their sub_id is > stop_on_error_sub_id. If it is true their execution will be
skipped as prior group execution failed. 'skip_event_group=1' will be set.
Since the execution of SQL thread is about to stop we just skip execution of
all the following event groups. We still do all the normal waiting and wakeup
processing between the event groups as a simple way to ensure that everything
is stopped and cleaned up correctly.
Upon error '1' transaction checks for registered waiters. Since no one is
there it simply goes away.
2 - Starts the execution. It checks do I have a waitee.
Since wait_commit_sub_id == entry->last_committed_sub_id no waitee is set.
Secondly: 'entry->stop_on_error_sub_id' is set by '1'st execution. Now
'handle_parallel_thread' code checks if the current group 'sub_id' is greater
than the 'sub_id' set within 'stop_on_error_sub_id'.
Since the above is true 'skip_event_group=true' is set. Simply call
'wait_for_prior_commit' to wakeup all waiters. Group '2' didn't had any
waitee and its execution is skipped. Hence its wakeup_error=0.It sends a
positive wakeup signal to '3'. Which commits. This results in a missed
transaction. i.e 33 is missed and 34 is committed.
Fix:
===
When a worker learns that an earlier transaction execution has failed, and it
should not proceed for further execution, it should mark its own execution
status as failed so that it alerts its followers to abort as well.
The test encryption.innodb-redo-badkey was accidentally disabled
until commit 23657a2101 enabled
it recently. Once it was enabled, it started failing randomly.
recv_recover_corrupt_page(): Do not assume that any redo log exists
for the page. A page may be unnecessarily read by read-ahead.
When noting the corruption, reset recv_addr->state to RECV_PROCESSED,
so that even if the same page is re-read again, we will only
decrement recv_sys->n_addrs once.
The test innodb_fts.fulltext_table_evict was only creating 1000 tables
with fulltext indexes, only to check that no tables with fulltext
indexes are being evicted.
The reason why tables containing fulltext indexes cannot be evicted is
that fts_optimize_init() invokes dict_table_prevent_eviction().
Test innodb_read_only startup (which will be refused after a crash),
and test also innodb_force_recovery=5, and extract some change buffer
merge statistics. Omit any statistics about delete (purge) buffering,
because purge could happen at any time.
Use the sequence storage engine for populating the table.
In the function test_if_cheaper_ordering we make a decision if using an index is better than
using filesort for ordering. If we chose to do range access then in test_quick_select we
should make sure that cost for table scan is set to DBL_MAX so that it is not picked.
