local storage for query cache).
We need more than one pointer in a thread to
represent the query cache and net->query_cache_query can not be used
any more (due to ABI compatibility issues and to different life
time of NET and THD).
This is a backport of the following patch from 6.0:
----------------------------------------------------------
revno: 2476.1157.2
committer: kostja@bodhi.(none)
timestamp: Sat 2007-06-16 13:29:24 +0400
storing and restoring information about foreign keys in the .FRM files and
properly displaying it in SHOW CREATE TABLE output and I_S tables.
The idea of this patch is to change type of Key_part_spec::field_name and
Key::name to LEX_STRING in order to avoid extra strlen() calls during
semantic analysis and statement execution, particularly, in code to be
implemented on the 2nd milestone of WL#148.
Note that since we are not using LEX_STRING everywhere yet (e.g. in
Create_field and KEY) and we want to limit scope of our changes we
have to do strlen() in places where we create Key and Key_part_spec
instances from objects using plain (char*) for strings. These calls
will go away during the process of further (char*) -> LEX_STRING
refactoring.
We have introduced these changes in 6.0 and backported them to 5.5
tree to make people aware of these changes as early as possible and
to simplify merges with mysql-fk and mysql-6.1-fk trees.
No test case is needed since this patch does not introduce any
user visible changes.
"have_profiling"
1) Renamed have_community_features server system variable to
have_profiling.
2) Removed eable-community-features configure option and
ENABLE_COMMUNITY_FEATURES macro.
3) Removed COMMUNITY_SERVER macro and replaced its usage by
ENABLED_PROFILING.
Only --enable-profiling is now needed to enable profiling.
It was the only existing "community feature", so there was
no need for both configure options.
Using --enable-community-features will give a warning message
since it no longer exists.
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
NOTE: Backporting the patch to next-mr.
WL#4828 Augment DBUG_ENTER/DBUG_EXIT to crash MySQL in different functions
-------
The assessment of the replication code in the presence of faults is extremely
import to increase reliability. In particular, one needs to know if servers
will either correctly recovery or print out appropriate error messages thus
avoiding unexpected problems in a production environment.
In order to accomplish this, the current patch refactories the debug macros
already provided in the source code and introduces three new macros that
allows to inject faults, specifically crashes, while entering or exiting a
function or method. For instance, to crash a server while returning from
the init_slave function (see module sql/slave.cc), one needs to do what
follows:
1 - Modify the source replacing DBUG_RETURN by DBUG_CRASH_RETURN;
DBUG_CRASH_RETURN(0);
2 - Use the debug variable to activate dbug instructions:
SET SESSION debug="+d,init_slave_crash_return";
The new macros are briefly described below:
DBUG_CRASH_ENTER (function) is equivalent to DBUG_ENTER which registers the
beginning of a function but in addition to it allows for crashing the server
while entering the function if the appropriate dbug instruction is activate.
In this case, the dbug instruction should be "+d,function_crash_enter".
DBUG_CRASH_RETURN (value) is equivalent to DBUG_RETURN which notifies the
end of a function but in addition to it allows for crashing the server
while returning from the function if the appropriate dbug instruction is
activate. In this case, the dbug instruction should be
"+d,function_crash_return". Note that "function" should be the same string
used by either the DBUG_ENTER or DBUG_CRASH_ENTER.
DBUG_CRASH_VOID_RETURN (value) is equivalent to DBUG_VOID_RETURN which
notifies the end of a function but in addition to it allows for crashing
the server while returning from the function if the appropriate dbug
instruction is activate. In this case, the dbug instruction should be
"+d,function_crash_return". Note that "function" should be the same string
used by either the DBUG_ENTER or DBUG_CRASH_ENTER.
To inject other faults, for instance, wrong return values, one should rely
on the macros already available. The current patch also removes a set of
macros that were either not being used or were redundant as other macros
could be used to provide the same feature. In the future, we also consider
dynamic instrumentation of the code.
BUG#45747 DBUG_CRASH_* is not setting the strict option
---------
When combining DBUG_CRASH_* with "--debug=d:t:i:A,file" the server crashes
due to a call to the abort function in the DBUG_CRASH_* macro althought the
appropriate keyword has not been set.
trigger, merge table
The problem with break statements is that they have very
local effects. Hence a break statement within the inner loop
of a nested-loops join caused execution to proceed to the
next table even though a serious error occurred. The problem
was fixed by breaking out the inner loop into its own
method. The change empowers all errors to terminate the
execution.
The errors that will now halt multi-DELETE execution
altogether are
- triggers returning errors
- handler errors
- server being killed
bzr branch mysql-5.1-performance-version mysql-trunk # Summit
cd mysql-trunk
bzr merge mysql-5.1-innodb_plugin # which is 5.1 + Innodb plugin
bzr rm innobase # remove the builtin
Next step: build, test fixes.
when used with --tab
1) New syntax: added CHARACTER SET clause to the
SELECT ... INTO OUTFILE (to complement the same clause in
LOAD DATA INFILE).
mysqldump is updated to use this in --tab mode.
2) ESCAPED BY/ENCLOSED BY field parameters are documented as
accepting CHAR argument, however SELECT .. INTO OUTFILE
silently ignored rests of multisymbol arguments.
For the symmetrical behavior with LOAD DATA INFILE the
server has been modified to fail with the same error:
ERROR 42000: Field separator argument is not what is
expected; check the manual
3) Current LOAD DATA INFILE recognizes field/line separators
"as is" without converting from client charset to data
file charset. So, it is supposed, that input file of
LOAD DATA INFILE consists of data in one charset and
separators in other charset. For the compatibility with
that [buggy] behaviour SELECT INTO OUTFILE implementation
has been saved "as is" too, but the new warning message
has been added:
Non-ASCII separator arguments are not fully supported
This message warns on field/line separators that contain
non-ASCII symbols.
procedures causes crashes!
The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.
Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).
variable. The problem was that THD::connect_utime could be
used without being initialized when the main thread is used
to handle connections (--thread-handling=no-threads).
The problem is that when a optimization of read-only transactions
(bypass 2-phase commit) was implemented, it removed the code that
reseted the XID once a transaction wasn't active anymore:
sql/sql_parse.cc:
- bzero(&thd->transaction.stmt, sizeof(thd->transaction.stmt));
- if (!thd->active_transaction())
- thd->transaction.xid_state.xid.null();
+ thd->transaction.stmt.reset();
This mostly worked fine as the transaction commit and rollback
functions (in handler.cc) reset the XID once the transaction is
ended. But those functions wouldn't reset the XID in case of
a empty transaction, leading to a assertion when a new starting
a new XA transaction.
The solution is to ensure that the XID state is reset when empty
transactions are ended (by either commit or rollback). This is
achieved by reorganizing the code so that the transaction cleanup
routine is invoked whenever a transaction is ended.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
MySQL crashes if a user without proper privileges attempts to create a procedure.
The crash happens because more than one error state is pushed onto the Diagnostic
area. In this particular case the user is denied to implicitly create a new user
account with the implicitly granted privileges ALTER- and EXECUTE ROUTINE.
The new account is needed if the original user account contained a host mask.
A user account with a host mask is a distinct user account in this context.
An alternative would be to first get the most permissive user account which
include the current user connection and then assign privileges to that
account. This behavior change is considered out of scope for this bug patch.
The implicit assignment of privileges when a user creates a stored routine is a
considered to be a feature for user convenience and as such it is not
a critical operation. Any failure to complete this operation is thus considered
non-fatal (an error becomes a warning).
The patch back ports a stack implementation of the internal error handler interface.
This enables the use of multiple error handlers so that it is possible to intercept
and cancel errors thrown by lower layers. This is needed as a error handler already
is used in the call stack emitting the errors which needs to be converted.
due to name_const substitution
Problem:
"In general, statements executed within a stored procedure
are written to the binary log using the same rules that
would apply were the statements to be executed in standalone
fashion. Some special care is taken when logging procedure
statements because statement execution within procedures
is not quite the same as in non-procedure context".
For example, each reference to a local variable in SP's
statements is replaced by NAME_CONST(var_name, var_value).
Queries like
"CREATE TABLE ... SELECT FUNC(local_var ..."
are logged as
"CREATE TABLE ... SELECT FUNC(NAME_CONST("local_var", var_value) ..."
that leads to differrent field names and
might result in "Incorrect column name" if var_value is long enough.
Fix: in 5.x we'll issue a warning in such a case.
In 6.0 we should get rid of NAME_CONST().
Note: this issue and change should be described in the documentation
("Binary Logging of Stored Programs").
Fine-tuning. Broke out comparison into method by
suggestion of Davi. Clarified comments. Reverting
test-case which I find too brittle; proper test
case in 5.1+.
When binlog_format is STATEMENT and the statement is unsafe before,
the unsafe warning/error message was issued without checking
whether the SQL_LOG_BIN was turned on or not.
Fixed with adding a sql_log_bin_toplevel flag in THD to check
whether SQL_LOG_BIN is ON in current session whatever the current is in sp or not.
- Add support for setting it as a server commandline argument
- Add support for those switches:
= no_index_merge
= no_index_merge_union
= no_index_merge_sort_union
= no_index_merge_intersection
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
