mysql-test/include/master-slave-end.inc:
New BitKeeper file ``mysql-test/include/master-slave-end.inc''
mysql-test/include/ndb_setup_slave.inc:
New BitKeeper file ``mysql-test/include/ndb_setup_slave.inc''
better replicaiton test cleanup to ensure better test predictability
+ some ndb test cleanup
client/mysqltest.c:
increase save_master_pos timeout to 30 seconds for higher test predictability
mysql-test/extra/rpl_tests/rpl_ddl.test:
better replicaiton test cleanup to ensure better test predictability
mysql-test/extra/rpl_tests/rpl_row_UUID.test:
better replicaiton test cleanup to ensure better test predictability
mysql-test/r/rpl_ndb_dd_advance.result:
better replicaiton test cleanup to ensure better test predictability
mysql-test/r/rpl_ndb_sync.result:
better replicaiton test cleanup to ensure better test predictability
mysql-test/t/disabled.def:
better replicaiton test cleanup to ensure better test predictability
mysql-test/t/rpl_ndb_bank.test:
better replicaiton test cleanup to ensure better test predictability
mysql-test/t/rpl_ndb_basic.test:
better replicaiton test cleanup to ensure better test predictability
mysql-test/t/rpl_ndb_dd_advance.test:
better replicaiton test cleanup to ensure better test predictability
mysql-test/t/rpl_ndb_dd_basic.test:
better replicaiton test cleanup to ensure better test predictability
mysql-test/t/rpl_ndb_sync.test:
better replicaiton test cleanup to ensure better test predictability
a race between updating and checking Max_used_connections. This is done in
a loop until either disconnect finished or timeout expired. In a latter case
the test will fail.
mysql-test/r/status.result:
Update result to match changes in test case.
mysql-test/t/status.test:
Close extra conections in previous test.
In test for bug#15933 we have to wait for all disconnects to finish to avoid
a race between updating and checking Max_used_connections. This is done in
a loop until either disconnect finished or timeout expired. In a latter case
the test will fail.
Use con1, con2, con3 instead of con3, con4, con5.
- Add variable "have_dynamic_loading" and use it to check if the udf test should be run.
mysql-test/include/have_udf.inc:
Use variable "have_dynamic_loading" to to determine if there is support for udf's
mysql-test/r/have_udf.require:
Use variable "have_dynamic_loading" to to determine if there is support for udf's
mysql-test/t/disabled.def:
Remove udf from disabled
sql/mysql_priv.h:
Add have_dlopen variable
sql/mysqld.cc:
Add have_dlopen variable
sql/set_var.cc:
Add have_dlopen variable and name it "have_dynamic_loading" in "SHOW VARIABLES"
BUILD/compile-dist:
fixes for 'make dist' and 'make distcheck'
include yassl in "dist"
Makefile.am:
fixes for 'make dist' and 'make distcheck'
remove double-listing of everything in SUBDIRS and DIST_SUBDIRS
remove @yassl_dir@, it belongs to extra/Makefile.am
specify --basedir for mysql_install_db, in case builddir (where mysql_install_db is)
differs from srcdir (where mysql_fix_privilege_tables.sql is)
config/ac-macros/yassl.m4:
fixes for 'make dist' and 'make distcheck'
create Makefile's only if yassl is used
yassl_dir must not include /
config/ac-macros/zlib.m4:
fixes for 'make dist' and 'make distcheck'
create Makefile only if zlib is used
configure.in:
fixes for 'make dist' and 'make distcheck'
create Makefile only if a feature is enabled
storage engine dirs must not include /
automatically disable readline/libedit/sql-bench if source dir is missing
extra/Makefile.am:
fixes for 'make dist' and 'make distcheck'
remove SUBDIR/DIST_SUBDIR hack
libmysql_r/Makefile.am:
fixes for 'make dist' and 'make distcheck'
when symlinking all files from libmysql/ take into account that
srcdir != builddir
libmysqld/Makefile.am:
fixes for 'make dist' and 'make distcheck'
remove fragile promiscuous search for object files
if .o file is not where we look for it - extract it from the library
mysql-test/ndb/Makefile.am:
fixes for 'make dist' and 'make distcheck'
ndbcluster script is not a "source"
don't forget to cleanup
plugin/Makefile.am:
fixes for 'make dist' and 'make distcheck'
include plugin/fulltext/configure.in template in the distribution
storage/Makefile.am:
fixes for 'make dist' and 'make distcheck'
remove SUBDIRS/DIST_SUBDIRS hack
storage/ndb/Makefile.am:
fixes for 'make dist' and 'make distcheck'
force common.mk.am out of DIST_COMMON (which is otherwise an
auto-generated list of Makefile's sources) because it's listed
indirectly in EXTRA_DIST, and with bk -r get, a file cannot be copied
twice.
Fixed in parser. rpl_view gained no changes but rpl_view-slave.opt.
sql/sql_yacc.yy:
UPDATING option for create/alter view is added for tables_ok to finds the view's
TABLE_LIST.updating as true. FIXME: Regarding to UPDATING option `create view' should not have
any difference from `create table'.
mysql-test/t/rpl_view-slave.opt:
The option is needed to force slave executes tables_ok which must return OK in conditions of this tests (no table foo is used.
"upgrade" failed on windows, because of lower_case_table_name.
This fix changes letters to lower case, not to depend on OS.
Note, this change does not affect coverage of
Bug N 17142 "Crash if create with encoded name",
which the test war originally written for.
mysql-test/r/upgrade.result:
Changing "P" to "p" not to depend on lower_case_table_name
mysql-test/t/upgrade.test:
Changing "P" to "p" not to depend on lower_case_table_name
This is faster under gdb/valgrind (this should speed up work of people who have to run
a simple test 50 times to do debugging). Running without --big, which is the default, InnoDB tests
take at most 18MB so 128 was overkill. Running with --big, InnoDB tests take 450MB so 128
was not enough anyway.
mysql-test/mysql-test-run.pl:
10M is faster to create than 128M (especially under gdb or valgrind) and is enough for most tests.
- Part 1, better handling of subprocess and stdout to be done
mysql-test/lib/mtr_process.pl:
- Dont redirect stdout if ActiveState perl since fork creates a new thread and not another process.
- Change waitpid to allow for negative pid as we get on Windows, strange but
that is how it is. It should never create a process with pid -1 though.
- Remove an "if" for cygwin that does not do anything.
- Add "print" in the potentially hanging while loop in "start_reap_all"
- Dont use "getpgrp" on windows.
- Remove "sleep 2" in mtr_exit
- Remove the initial ping of mysqld's in 'mysql_admin_shutdown', instead just start one
mysqladmin for each expected mysqld server and wait for them to return.
Then perform the ping of the mysqld server's. Those ping's normally return immediately.
Fixed naming procedures for default partitioning and default subpartitioning
mysql-test/r/partition_pruning.result:
Fixed test cases for new naming of default subpartitions
mysql-test/r/partition_range.result:
New test case
mysql-test/t/partition_range.test:
New test case
sql/partition_info.cc:
Fixed naming procedures for default partitioning and default subpartitioning
sql/partition_info.h:
Fixed naming procedures for default partitioning and default subpartitioning
- Terminate loop not only when the limit is met, but alse when there is no more stmts
client/mysqlslap.c:
Terminate loop not only when the limit is met, but alse when there is no more stmts
mysql-test/r/mysqlslap.result:
Remove the extra statmemnt
If the second or the third argument of a BETWEEN predicate was
a constant expression, like '2005.09.01' - INTERVAL 6 MONTH,
while the other two arguments were fields then the predicate
was evaluated incorrectly and the query returned a wrong
result set.
The bug was introduced in 5.0.17 when in the fix for 12612.
mysql-test/r/func_time.result:
Added a test case for bug #18618.
mysql-test/t/func_time.test:
Added a test case for bug #18618.
It was impossible to create some table names on Windows
(e.g. LPT1, AUX, COM1, etc).
Fixed to pad dangerous names with thee "at" signs
(e.g. LPT1@@@, AUX@@@, COM1@@@, and so on).
include/my_sys.h:
Adding new function declaration
mysys/my_access.c:
Adding new function check_if_legal_tablename().
It works almost like check_if_legal_filename(),
but accepts a table name without extension and path,
and does not check "CLOCK$".
sql/sql_table.cc:
Check if a dangerous table name and append @@@
strings/ctype-utf8.c:
Treat "@@@" sequence in a table name as a end-of-line.
mysql-test/r/ctype_filename.result:
New BitKeeper file ``mysql-test/r/ctype_filename.result''
mysql-test/t/ctype_filename.test:
New BitKeeper file ``mysql-test/t/ctype_filename.test''
mysql-test/r/innodb.result:
Fix for bug #14360: Date Between Interval Broken.
- test case.
mysql-test/t/innodb.test:
Fix for bug #14360: Date Between Interval Broken.
- test case.
sql/item_timefunc.cc:
Fix for bug #14360: Date Between Interval Broken.
- Item_date_add_interval::eq() introduced.
sql/item_timefunc.h:
Fix for bug #14360: Date Between Interval Broken.
- Item_date_add_interval::eq() introduced.
a misnamed function
... in the presence of a continue handler. The problem was that with a
handler, it continued to execute as if function existed and had set a
useful return value (which it hadn't).
The fix is to set a null return value and do an error return when a function
wasn't found.
mysql-test/r/sp.result:
Updated results for a new test case (BUG#18787).
mysql-test/t/sp.test:
New testcase for BUG#18787.
sql/item_func.cc:
Don't set "out of resources" error in Item_func_sp::execute() if no
result field is returned, it's simply wrong, it can be sometthing else,
like a function not found. Instead set null_value and return error.
Also, set "out of resources" when field creation fails in
Item_func_sp::sp_result_field() and Item_func_sp::tmp_table_field().
Open and seek to end of data_file after rename
Fix comment for when file does not need repair.
Set share->mapped_file to NULL always when it's been unmapped
Add test to see that file can be used after repair
mysql-test/r/csv.result:
Add more test to see that the table can be used after repair
mysql-test/t/csv.test:
Add more test to see that the table can be used after repair
storage/csv/ha_tina.cc:
Close share->data_file in before renaming in ha_tina::repair
Open and seek to end after rename
Fix comment for when file does not need repair.
Set share->mapped_file to NULL always when it's been unmapped
mysql-test/mysql-test-run.pl:
no ndbcluster needed here
mysql-test/mysql-test-run.sh:
no ndbcluster needed here
mysql-test/t/mysqltest.test:
this test shouldn't work with the embedded server
into mysql.com:/usr/home/ram/work/mysql-4.1
mysql-test/r/func_op.result:
Auto merged
sql/item_func.cc:
Auto merged
mysql-test/t/func_op.test:
SCCS merged
