When replicating from 4.1 master to 5.0 slave START SLAVE UNTIL can stop too late.
The necessary in calculating of the beginning of an event the event's length
did not correspond to the master's genuine information at the event's execution time.
That piece of info was changed at the event's relay-logging due to binlog_version<4 event
conversion by IO thread.
Fixed with storing the master genuine Query_log_event size into a new status
variable at relay-logging of the event. The stored info is extacted at the event
execution and participate further to caclulate the correct start position of the event
in the until-pos stopping routine.
The new status variable's algorithm will be only active when the event comes
from the master of version < 5.0 (binlog_version < 4).
Detailed revision comments:
r6471 | calvin | 2010-01-16 01:43:27 +0200 (Sat, 16 Jan 2010) | 4 lines
branches/5.1: fix bug#49396: main.innodb test fails in embedded mode
Change replace_result by using $MYSQLD_DATADIR. Tested in both embedded
mode and normal server mode.
Detailed revision comments:
r6492 | sunny | 2010-01-21 09:38:35 +0200 (Thu, 21 Jan 2010) | 1 line
branches/5.1: Add reference to bug#47621 in the comment.
Detailed revision comments:
r6489 | sunny | 2010-01-21 02:57:50 +0200 (Thu, 21 Jan 2010) | 2 lines
branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
into a separate test/result files.
Detailed revision comments:
r6488 | sunny | 2010-01-21 02:55:08 +0200 (Thu, 21 Jan 2010) | 2 lines
branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
into a separate test/result files.
In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
condition variable per context instead of one mutex and one conditional
variable for the whole subsystem.
This should increase concurrency in this subsystem.
It also opens the way for further changes which are necessary to solve
such bugs as bug #46272 "MySQL 5.4.4, new MDL: unnecessary deadlock"
and bug #37346 "innodb does not detect deadlock between update and alter
table".
Two other notable changes done by this patch:
- MDL subsystem no longer implicitly acquires global intention exclusive
metadata lock when per-object metadata lock is acquired. Now this has
to be done by explicit calls outside of MDL subsystem.
- Instead of using separate MDL_context for opening system tables/tables
for purposes of I_S we now create MDL savepoint in the main context
before opening tables and rollback to this savepoint after closing
them. This means that it is now possible to get ER_LOCK_DEADLOCK error
even not inside a transaction. This might happen in unlikely case when
one runs DDL on one of system tables while also running DDL on some
other tables. Cases when this ER_LOCK_DEADLOCK error is not justified
will be addressed by advanced deadlock detector for MDL subsystem which
we plan to implement.
When compiling wiht ./configure --with-ssl=/usr,
which used OPEN_SSL but not YASSL, the code in sql/mysqld.cc
failed to build because of an incomplete performance schema instrumentation.
This fix implements properly the instrumentation for the rwlock
used in openssl_lock_t.
Verified that the code builds, and the ssl + performance schema tests
do pass.
cant find record
Some engines return data for the record. Despite the fact that
the null bit is set for some fields, their old value may still in
the row. This can happen when unpacking an AI from the binlog on
top of a previous record in which a field is set to NULL, which
previously contained a value. Ultimately, this may cause the
comparison of records to fail when the slave is doing an index or
range scan.
We fix this by deploying a call to reset() for each field that is
set to null while unpacking a row from the binary log.
Furthermore, we also add mixed mode test case to cover the
scenario where updating and setting a field to null through a
Query event and later searching it through a rows event will
succeed.
Finally, we also change the reset() method, from Field_bit class,
so that it takes into account bits stored among the null bits and
not only the ones stored in the record.
check_access() returning false for a database does not
guarantee that the access is granted to it.
This wrong condition in filling the INFORMATION_SCHEMA
tables causes extra tables to be returned to the user
even if he has no rights to see them.
Fixed by correcting the condition.
Resetting the master before stopping the slave was generating the message
"[ERROR] Slave I/O: Got fatal error 1236 from master when reading data from
binary log: 'could not find next log', Error_code: 1236". In consequence,
the test case was failing because the message had not been suppressed.
To circumvent the failure, we rewrote the test stopping the slave before
resetting the master. We prefer this alternative rather than suppressing
the message.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
Several items said to be deprecated in the 4.1 manual
have never been removed. This worklog adds deprecation
warnings when these items are used, and warns the user
that the items will be removed in MySQL 5.6.
A couple of previously deprecation decision have been
reversed (see single file comments)
enabled binary
The test case injects an error in the server by deleting the
temporary file that it uses during the load data statement
execution. The error consisted of closing, deleting and setting
the file descriptor to -1 right before calling mysql_file_write.
Although, this error injection seems to work OK in Unix like
environments, in Windows, this would cause the server to hit an
assertion in 'my_get_open_flags':
DBUG_ASSERT(fd >= MY_FILE_MIN && fd < (int)my_file_limit)
We fix this by changing the error injection to just call the
macro my_delete_allow_opened, instead of the close + delete + set
fd=-1. The macro deletes the file and is platform
independent. Additionally, this required some changes to how the
assertion is handled in the test case to make it cope with this
change.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
The test case was failing because it contained instructions
to close/reopen files, when they were in use. This raises
problems in windows. Example of such instruction:
---exec echo "failure" > $MYSQLD_SLAVE_DATADIR/$file
The test also contains commands that are not platform
agnostic. Example:
--exec cat $MYSQLD_SLAVE_DATADIR/master.backup > \
$MYSQLD_SLAVE_DATADIR/master.info
We fix this by just truncating the necessary file and write
"failure" into it (ie, without closing the file). The
platform specific instruction is removed from the test
case as it seems redundant.
