trigger, merge table
The problem with break statements is that they have very
local effects. Hence a break statement within the inner loop
of a nested-loops join caused execution to proceed to the
next table even though a serious error occurred. The problem
was fixed by breaking out the inner loop into its own
method. The change empowers all errors to terminate the
execution.
The errors that will now halt multi-DELETE execution
altogether are
- triggers returning errors
- handler errors
- server being killed
mysql-test/r/delete.result:
Bug#46958: Test result.
mysql-test/t/delete.test:
Bug#46958: Test case.
sql/sql_class.h:
Bug#46958: New method declaration.
sql/sql_delete.cc:
Bug#46958: New method implementation.
* Finished Monty and Jani's merge
* Some InnoDB tests still fail (because it's old xtradb code run against
newer testsuite). They are expected to go after mergning with the latest
xtradb.
(temporary) TABLE, crash
Problem: if one has an open "HANDLER t1", further "TRUNCATE t1"
doesn't close the handler and leaves handler table hash in an
inconsistent state, that may lead to a server crash.
Fix: TRUNCATE should implicitly close all open handlers.
Doc. request: the fact should be described in the manual accordingly.
mysql-test/r/handler_myisam.result:
Fix for bug #46456 [Ver->Prg]: HANDLER OPEN + TRUNCATE + DROP
(temporary) TABLE, crash
- test result.
mysql-test/t/handler_myisam.test:
Fix for bug #46456 [Ver->Prg]: HANDLER OPEN + TRUNCATE + DROP
(temporary) TABLE, crash
- test case.
sql/sql_delete.cc:
Fix for bug #46456 [Ver->Prg]: HANDLER OPEN + TRUNCATE + DROP
(temporary) TABLE, crash
- remove all truncated tables from the HANDLER's hash.
NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Added auxiliary file used by binlog_unsafe.test to create and
execute recursive constructs
(functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Filter out table id from table map events in binlog listing.
Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
Disabled warnings for code that generates warnings
for some binlog formats. That would otherwise cause
inconsistencies in the result file.
mysql-test/r/mysqldump.result:
Views are now unsafe if they contain a LIMIT clause.
That fixed BUG#45831. Due to BUG#45832, a warning is
printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
Unsafe statements in stored procedures did not give a warning if
binlog_format=statement. This is BUG#45824. Now they do, so this
result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
That was BUG#45825. Now there is a warning, so result file needs to be
updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file:
- error message changed
- added test for most combinations of unsafe constructs invoked
from recursive constructs
- INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
- INSERT..SELECT..LIMIT now gives a warning from inside recursive
constructs (because BUG#45785 was fixed)
- When a recursive construct (e.g., stored proc or function)
contains more than one statement, at least one of which is
unsafe, then all statements in the recursive construct give
warnings. This is a new bug introduced by this changeset.
It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
The error code has changed for statements where more than one
engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Clarified comment.
- Rewrote first part of test. Now it tests not only unsafe variables
and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
access to log tables in the mysql database.
Also, in addition to functions, procedures, triggers, and prepared
statements, it now also tests views; and it constructs recursive
calls in two levels by combining these recursive constructs.
Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
- added tests for all special system variables that should not be unsafe.
- added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
the second half of the old rpl_found_rows.result, with the following
modifications:
- minor formatting changes
- additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to rpl_row_idempotency.test. This is
the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- warning is now issued for unsafe statements inside procedures
(since BUG#45824 is fixed)
- second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
Removed explicit set of binlog_format and removed duplicate testing.
Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
- Moved out row-only tests to a new test file, rpl_row_idempotency.test.
rpl_idempotency now only contains tests that execute in all
binlog_formats.
- While I was here, also removed .opt file to avoid server restarts.
The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
contains the second half of the original rpl_found_rows.test with the
follwing changes:
- initialization
- removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
- minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Test cannot execute in statement mode, since we no longer
switch to row format when binlog_format=statement.
Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to this new file. We now rely on the
test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
- Got rid of unnecessary explicit setting of binlog format.
- extra/rpl_tests/rpl_insert_delayed.test does not need the
$binlog_format_statement variable any more, so that was
removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- added have_binlog_format_statement and removed SET BINLOG_FORMAT.
- second half of file is moved to rpl_mix_found_rows.test
- added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Removed explicit set of binlog format. Instead, the test now only
executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
New test case to verify all errors and warnings generated by
decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
sql/event_db_repository.cc:
Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
thread any more. Instead, the ndb_binlog thread now forces row mode both
initially and just after calling mysql_parse. (mysql_parse() is the only
place where reset_current_stmt_binlog_row_based() may be called from
the ndb_binlog thread, so these are the only two places that need to
change.)
sql/ha_partition.cc:
Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
Added DBUG_ENTER to some functions, to be able to trace when
set_stmt_unsafe is called.
sql/log.cc:
Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
- Moved logic for changing to row format out of do_apply_event (and into
decide_logging_format).
- Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
Move logic for changing to row format out of do_apply_event (and into
decide_logging_format).
sql/mysql_priv.h:
Make decide_logging_format() a member of the THD class, for two reasons:
- It is natural from an object-oriented perspective.
- decide_logging_format() needs to access private members of THD
(specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
Removed call to set_current_stmt_binlog_row_based().
From now on, only decide_logging_fromat is allowed to modify
current_stmt_binlog_row_based. This call is from the ndb_binlog
thread, mostly executing code in ha_ndbcluster_binlog.cc.
This call can be safely removed, because:
- current_stmt_binlog_row_based is initialized for the ndb_binlog
thread's THD object when the THD object is created. So we're
not going to read uninitialized memory.
- The behavior of ndb_binlog thread does not use the state of the
current_stmt_binlog_row_based. It is conceivable that the
ndb_binlog thread would rely on the current_stmt_binlog_format
in two situations:
(1) when it calls mysql_parse;
(2) when it calls THD::binlog_query.
In case (1), it always clears THD::options&OPTION_BIN_LOG (because
run_query() in ha_ndbcluster_binlog.cc is only called with
disable_binlogging = TRUE).
In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
- Made decide_logging_format take care of all logic for deciding the
logging format, and for determining the related warnings and errors.
See comment above decide_logging_format for details.
- Made decide_logging_format a member function of THD, since it needs
to access private members of THD and since its purpose is to update
the state of a THD object.
- Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
- Moved logic for determining unsafe warnings away from THD::binlog_query
(and into decide_logging_format()). Now, it works like this:
1. decide_logging_format detects that the current statement shall
produce a warning, if it ever makes it to the binlog
2. decide_logging_format sets a flag of THD::binlog_warning_flags.
3. THD::binlog_query reads the flag. If the flag is set, it generates
a warning.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
- Added THD::binlog_warning_flags (see sql_class.cc for explanation).
- Made decide_logging_format() and reset_for_next_command() member
functions of THD (instead of standalone functions). This was needed
for two reasons: (1) the functions need to access the private member
THD::binlog_warning_flags; (2) the purpose of these functions is to
update the staet of a THD object, so from an object-oriented point
of view they should be member functions.
- Encapsulated current_stmt_binlog_row_based, so it is now private and
can only be accessed from a member function. Also changed the
data type to an enumeration instead of a bool.
- Removed MYSQL_QUERY_TYPE, because it was equivalent to
STMT_QUERY_TYPE anyways.
- When reset_current_stmt_binlog_row_based was called from the
ndb_binlog thread, it would behave as a no-op. This special
case has been removed, and the behavior of
reset_current_stmt_binlog_row_based does not depend on which thread
calls it any more. The special case did not serve any purpose,
since the ndb binlog thread did not take the
current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
- Moved logic for setting row format for DELETE..LIMIT away from
mysql_prepare_delete.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
- Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
thd->set_current_stmt_binlog_row_based_if_mixed() from
handle_delayed_insert(). The calls are unnecessary because they
have already been made; they were made in the constructor of
the `di' object.
- Since decide_logging_format() is now a member function of THD, code
that calls decide_logging_format() had to be updated.
- Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
called.
- Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
mysql_insert_select_prepare() (and into decide_logging_format).
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
- Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
This was necessary so that a statement can identify itself as a row
injection.
- Added appropriate setter and getter functions for the new flag.
- Added or clarified some comments.
- Added DBUG_ENTER()
sql/sql_load.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
- Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
- Since thd->binlog_warning_flags is private, it must be set in a
member function of THD. Hence, moved the body of
mysql_reset_thd_for_next_command() to the new member function
THD::reset_thd_for_next_command(), and made
mysql_reset_thd_for_next_command() call
THD::reset_thd_for_next_command().
- Removed confusing comment.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
Moved logic for setting row format for UPDATE..LIMIT away from
mysql_prepare_update.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
DELETE..LIMIT mark themselves as unsafe at parse time (instead
of at execution time).
This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
Made exampledb accept inserts. This was needed by the new test case
rpl_ndb_binlog_format_errors, because it needs an engine that
is statement-only (and accepts inserts).
storage/example/ha_example.h:
Made exampledb a statement-only engine instead of a row-only engine.
No existing test relied exampledb's row-only capabilities. The new
test case rpl_ndb_binlog_format_errors needs an engine that is
statement-only.
storage/innobase/handler/ha_innodb.cc:
- Changed error error code and message given by innodb when
binlog_format=STATEMENT and transaction isolation level is
READ COMMITTED or READ UNCOMMITTED.
- While I was here, also simplified the condition for
checking when to give the error.
without error
When using quick access methods for searching rows in UPDATE or
DELETE there was no check if a fatal error was not already sent
to the client while evaluating the quick condition.
As a result a false OK (following the error) was sent to the
client and the error was thus transformed into a warning.
Fixed by checking for errors sent to the client during
SQL_SELECT::check_quick() and treating them as real errors.
Fixed a wrong test case in group_min_max.test
Fixed a wrong return code in mysql_update() and mysql_delete()
mysql-test/r/bug40113.result:
Bug #40013: test case
mysql-test/r/group_min_max.result:
Bug #40013: fixed a wrong test case
mysql-test/t/bug40113-master.opt:
Bug #40013: test case
mysql-test/t/bug40113.test:
Bug #40013: test case
mysql-test/t/group_min_max.test:
Bug #40013: fixed a wrong test case
sql/sql_delete.cc:
Bug #40113: check for errors evaluating the quick select
sql/sql_update.cc:
Bug #40113: check for errors evaluating the quick select
The problem: described in the bug report.
The fix:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
client/mysql.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/ha_ndbcluster.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/ha_ndbcluster_binlog.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/handler.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/log.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/mysqld.cc:
removed unnecessary line
sql/parse_file.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_acl.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_base.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_db.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_delete.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_partition.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_rename.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_show.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_table.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_view.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
Large transactions and statements may corrupt the binary log if the size of the
cache, which is set by the max_binlog_cache_size, is not enough to store the
the changes.
In a nutshell, to fix the bug, we save the position of the next character in the
cache before starting processing a statement. If there is a problem, we simply
restore the position thus removing any effect of the statement from the cache.
Unfortunately, to avoid corrupting the binary log, we may end up loosing changes
on non-transactional tables if they do not fit in the cache. In such cases, we
store an Incident_log_event in order to stop the slave and alert users that some
changes were not logged.
Precisely, for every non-transactional changes that do not fit into the cache,
we do the following:
a) the statement is *not* logged
b) an incident event is logged after committing/rolling back the transaction,
if any. Note that if a failure happens before writing the incident event to
the binary log, the slave will not stop and the master will not have reported
any error.
c) its respective statement gives an error
For transactional changes that do not fit into the cache, we do the following:
a) the statement is *not* logged
b) its respective statement gives an error
To work properly, this patch requires two additional things. Firstly, callers to
MYSQL_BIN_LOG::write and THD::binlog_query must handle any error returned and
take the appropriate actions such as undoing the effects of a statement. We
already changed some calls in the sql_insert.cc, sql_update.cc and sql_insert.cc
modules but the remaining calls spread all over the code should be handled in
BUG#37148. Secondly, statements must be either classified as DDL or DML because
DDLs that do not get into the cache must generate an incident event since they
cannot be rolled back.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
sql/log_event.cc:
Changed constructors of Query_log_event and Execute_load_log_event to accept the error code argument instead of figuring it out by itself
sql/log_event.h:
Changed constructors of Query_log_event and Execute_load_log_event to accept the error code argument
with seg fault
Multiple-table DELETE from a table joined to itself may cause
server crash. This was originally discovered with MEMORY engine,
but may affect other engines with different symptoms.
The problem was that the server violated SE API by performing
parallel table scan in one handler and removing records in
another (delete on the fly optimization).
mysql-test/r/heap_btree.result:
Updated test result after adding new test for this bug.
mysql-test/t/heap_btree.test:
Updated test result after adding new test for the bug report.
sql/sql_delete.cc:
Updated to check if the files in delete list appears in join list and disable
delete while scanning, if it appears.
on 5.0
The server crashes on an assert in net_end_statement indicating that the
Diagnostics area wasn't set properly during execution.
This happened on a multi table DELETE operation using the IGNORE keyword.
The keyword is suppose to allow for execution to continue on a best effort
despite some non-fatal errors. Instead execution stopped and no client
response was sent which would have led to a protocol error if it hadn't been
for the assert.
This patch corrects this issue by checking for the existence of an IGNORE
option before setting an error state during row-by-row delete iteration.
mysql-test/r/innodb_mysql.result:
* Added test case for bug40127
mysql-test/t/innodb_mysql.test:
* Added test case for bug40127
sql/sql_delete.cc:
* IGNORE option wasn't implemented in multi_delete::send_data
and multi_delete::do_deletes
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
mysql-test/t/variables.test:
Reset delay_key_write, otherwise maria.maria test may fail
sql/set_var.cc:
Reset ha_open_options if one resets the delay_key_write variable.
Before there was no way to reset it without restarting mysqld, which caused some tests to fail
There were so many changes into mtr (this is the new mtr coming) that I rather
copied mtr from 6.0-main here (at least this one knows how to run Maria tests).
I also fixed suite/maria tests to be accepted by the new mtr.
mysys/thr_mutex.c:
adding DBUG_PRINT here, so that we can locate where the warning is issued.
TRUNCATE TABLE fails to replicate when stmt-based binlogging is not supported.
There were two separate problems with the code, both of which are fixed with
this patch:
1. An error was printed by InnoDB for TRUNCATE TABLE in statement mode when
the in isolation levels READ COMMITTED and READ UNCOMMITTED since InnoDB
does permit statement-based replication for DML statements. However,
the TRUNCATE TABLE is not transactional, but is a DDL, and should therefore
be allowed to be replicated as a statement.
2. The statement was not logged in mixed mode because of the error above, but
the error was not reported to the client.
This patch fixes the problem by treating TRUNCATE TABLE a DDL, that is, it is
always logged as a statement and not reporting an error from InnoDB for TRUNCATE
TABLE.
mysql-test/extra/binlog_tests/binlog_truncate.test:
Adding new test to check that TRUNCATE TABLE is written correctly
to the binary log.
mysql-test/extra/rpl_tests/rpl_truncate.test:
Removing redundant testing by eliminating settings of BINLOG_FORMAT.
mysql-test/extra/rpl_tests/rpl_truncate_helper.test:
Replacing slave and master reset code with include file.
Removing settings of BINLOG_FORMAT.
Replacing printing of table contents to compare master and slave
with diff_tables.inc.
mysql-test/suite/binlog/t/binlog_truncate_innodb.test:
Adding test for testing that TRUNCATE TABLE is logged correctly for InnoDB
in all isolation levels.
mysql-test/suite/binlog/t/binlog_truncate_myisam.test:
Adding test for testing that TRUNCATE TABLE is logged correctly for MyISAM.
mysql-test/suite/binlog/t/disabled.def:
Disabling binlog_truncate_innodb since it does not work (yet).
sql/sql_base.cc:
Correcting setting of capabilities flags to make the comparison with 0
later in the code work correctly.
sql/sql_delete.cc:
Re-organizing code to ensure that TRUNCATE TABLE is logged in statement
format and that row format is not used unless there are rows to log (which
there are not when delete_all_rows() is called, so this has to be logged
as a statement).
- Added braces around expressions with &&, ||, & and |
- Added empty line before ; for empty while and for loops
- Added () around if with assignments
- Removed const before function returning simple type
Changed BUILD scripts to not build with NDB
BUILD/SETUP.sh:
By default, don't build ndb with --max in Maria tree.
NDB is not kept up to date anyway in 5.1
client/mysql.cc:
Added braces around && to get rid of compiler warnings
sql/event_db_repository.cc:
Added braces around && to get rid of compiler warnings
sql/events.cc:
Added braces around && to get rid of compiler warnings
sql/field.cc:
Added braces around && to get rid of compiler warnings
Fixed for loops
sql/field.h:
Added braces around & to get rid of compiler warnings
sql/field_conv.cc:
Added braces around && to get rid of compiler warnings
Fixed bug when copying between DATETIME fields and strict dates are used
Removed not needeed else
sql/gstream.cc:
Added braces around && to get rid of compiler warnings
sql/ha_ndbcluster.cc:
Added braces around && to get rid of compiler warnings
Added {} to get rid of compiler warnings
sql/handler.cc:
Added braces around && to get rid of compiler warnings
sql/item.cc:
Added braces around && to get rid of compiler warnings
sql/item_cmpfunc.cc:
Added braces around && to get rid of compiler warnings
Removed some not needed space
sql/item_func.cc:
Added braces around && to get rid of compiler warnings
sql/item_strfunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_subselect.cc:
Added braces around && to get rid of compiler warnings
sql/item_sum.cc:
Added braces around && to get rid of compiler warnings
sql/item_timefunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_xmlfunc.cc:
Added empty line before ; for empty while and for loops
sql/log.cc:
Added braces around && to get rid of compiler warnings
sql/log_event.cc:
Added braces around && to get rid of compiler warnings
Removed not needed else
sql/log_event_old.cc:
Added braces around && to get rid of compiler warnings
sql/opt_range.cc:
Added braces around && to get rid of compiler warnings
sql/opt_sum.cc:
Added braces around && to get rid of compiler warnings
sql/set_var.cc:
Added empty line before ; for empty while and for loops
Added () around if with assignments
sql/slave.cc:
Added braces around && to get rid of compiler warnings
Added empty line before ; for empty while and for loops
sql/spatial.h:
Added braces around && to get rid of compiler warnings
sql/sql_acl.cc:
Added braces around && to get rid of compiler warnings
sql/sql_analyse.cc:
Added empty line before ; for empty while and for loops
sql/sql_base.cc:
Added braces around && to get rid of compiler warnings
sql/sql_connect.cc:
Added braces around && to get rid of compiler warnings
sql/sql_db.cc:
Added braces around && to get rid of compiler warnings
sql/sql_delete.cc:
Added braces around && to get rid of compiler warnings
sql/sql_help.cc:
Added empty line before ; for empty while and for loops
sql/sql_insert.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
sql/sql_lex.cc:
Cast char array references to uchar; Fixed wrong array referencing when using characters > ASCII 128 in SQL statments
Added empty line before ; for empty while and for loops
Trivial indent fixes
Added braces around && to get rid of compiler warnings
sql/sql_load.cc:
Added braces around && to get rid of compiler warnings
sql/sql_parse.cc:
Added braces around && to get rid of compiler warnings
sql/sql_partition.cc:
Added braces around && to get rid of compiler warnings
sql/sql_plugin.cc:
Fixed bug in detecing if option variable should be readonly
Added empty line before ; for empty while and for loops
sql/sql_prepare.cc:
Added braces around && to get rid of compiler warnings
sql/sql_select.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
Added empty line before ; for empty while and for loops
sql/sql_show.cc:
Added braces around && to get rid of compiler warnings
sql/sql_table.cc:
Added braces around && to get rid of compiler warnings
sql/sql_trigger.cc:
Added braces around && to get rid of compiler warnings
sql/sql_update.cc:
Added braces around && to get rid of compiler warnings
sql/sql_yacc.yy:
Added braces around && to get rid of compiler warnings
sql/table.cc:
Added braces around && to get rid of compiler warnings
sql/table.h:
Added braces around && to get rid of compiler warnings
sql/time.cc:
Added braces around && to get rid of compiler warnings
sql/tztime.cc:
Added braces around && to get rid of compiler warnings
sql/uniques.cc:
Added braces around && to get rid of compiler warnings
storage/federated/ha_federated.cc:
Fixed bug in testing of variable to ha_info() (Not critical)
storage/heap/ha_heap.cc:
Added braces around && to get rid of compiler warnings
storage/maria/ha_maria.cc:
Fixed bug: Mark that maria_log_dir_path is readonly
Added braces around && to get rid of compiler warnings
storage/ndb/include/ndbapi/NdbEventOperation.hpp:
Removed const before function returning simple type
storage/ndb/include/ndbapi/NdbOperation.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/Ndb.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/NdbEventOperation.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbRecAttr.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/TransporterFacade.hpp:
Added braces around && to get rid of compiler warnings
When using CREATE TEMPORARY TABLE LIKE to create a temporary table,
or using TRUNCATE to delete all rows of a temporary table, they
did not set the tmp_table_used flag, and cause the omission of
"SET @@session.pseudo_thread_id" when dumping binlog with mysqlbinlog,
and cause error when replay the statements.
This patch fixed the problem by setting tmp_table_used in these two
cases. (Done by He Zhenxing 2009-01-12)
mysql-test/suite/binlog/r/binlog_tmp_table.result:
Add test case for BUG#35583
mysql-test/suite/binlog/t/binlog_tmp_table.test:
Add test case for BUG#35583
sql/sql_delete.cc:
set thd->tmp_table_used when truncate temporary table
sql/sql_table.cc:
set thd->tmp_table_used when using create like to create temporary tables
The special TRUNCATE TABLE (DDL) transaction wasn't being properly
rolled back if a error occurred during row by row deletion. The
error can be caused by a foreign key restriction imposed by InnoDB
SE and would cause the server to erroneously issue a implicit
commit.
The solution is to rollback the transaction if a truncation via row
by row deletion fails, otherwise commit. All effects of a TRUNCATE
ABLE operation are rolled back if a row by row deletion fails.
mysql-test/include/commit.inc:
Truncate always starts a transaction and commits at the end.
The commit at the end increases the count by two, one is the
storage engine commit and the other is the binary log.
mysql-test/r/commit_1innodb.result:
Update test case results.
mysql-test/r/innodb_mysql.result:
Update test case results.
mysql-test/t/innodb_mysql.test:
Add test case for Bug#37016
sql/sql_delete.cc:
Move truncation using row by row deletion to its own function.
If row by row deletion fails, rollback the transaction.
Remove the meddling with disabling and enabling of autocommit
as TRUNCATE transaction is now explicitly ended (committed
or rolled back).
TRUNCATE TABLE for InnoDB tables returned a count showing an approximation
of the number of rows affected to gain efficiency.
Now the statement always returns 0 rows affected for clarity.
sql/sql_delete.cc:
* Set row count to 0 if auto increment was reset which can happen
if TRUNCATE TABLE was issued.
- In QUICK_INDEX_MERGE_SELECT::read_keys_and_merge: when we got table->sort from Unique,
tell init_read_record() not to use rr_from_cache() because a) rowids are already sorted
and b) it might be that the the data is used by filesort(), which will need record rowids
(which rr_from_cache() cannot provide).
- Fully de-initialize the table->sort read in QUICK_INDEX_MERGE_SELECT::get_next(). This fixes BUG#35477.
(bk trigger: file as fix for BUG#35478).
sql/filesort.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- make find_all_keys() use quick->get_next() instead of init_read_record(r)/r.read_record() calls
- added dbug printout
sql/mysql_priv.h:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/opt_range.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- In QUICK_INDEX_MERGE_SELECT::read_keys_and_merge: when we got table->sort from Unique,
tell init_read_record() not to use rr_from_cache() because a) rowids are already sorted
and b) it might be that the the data is used by filesort(), which will need record rowids
(which rr_from_cache() cannot provide).
- Fully de-initialize the table->sort read in QUICK_INDEX_MERGE_SELECT::get_next().
sql/records.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added disable_rr_cache parameter to init_read_record
- Added comment
sql/sql_acl.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_delete.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_help.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_select.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_table.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_udf.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_update.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
into mysql.com:/home/my/mysql-new
BitKeeper/etc/ignore:
auto-union
BUILD/SETUP.sh:
Auto merged
CMakeLists.txt:
Auto merged
client/get_password.c:
Auto merged
client/mysqldump.c:
Auto merged
client/mysqltest.c:
Auto merged
cmd-line-utils/readline/bind.c:
Auto merged
cmd-line-utils/readline/display.c:
Auto merged
cmd-line-utils/readline/histexpand.c:
Auto merged
cmd-line-utils/readline/history.c:
Auto merged
cmd-line-utils/readline/readline.c:
Auto merged
cmd-line-utils/readline/text.c:
Auto merged
dbug/user.r:
Auto merged
extra/yassl/src/handshake.cpp:
Auto merged
include/config-win.h:
Auto merged
include/m_string.h:
Auto merged
include/my_global.h:
Auto merged
include/my_pthread.h:
Auto merged
include/mysql/plugin.h:
Auto merged
include/mysql_com.h:
Auto merged
include/thr_alarm.h:
Auto merged
libmysql/CMakeLists.txt:
Auto merged
libmysql/Makefile.shared:
Auto merged
libmysql/dll.c:
Auto merged
libmysql/get_password.c:
Auto merged
libmysql/libmysql.c:
Auto merged
libmysqld/Makefile.am:
Auto merged
mysql-test/lib/mtr_cases.pl:
Auto merged
mysql-test/mysql-test-run.pl:
Auto merged
mysql-test/r/alter_table.result:
Auto merged
mysql-test/r/change_user.result:
Auto merged
mysql-test/r/create.result:
Auto merged
mysql-test/r/innodb.result:
Auto merged
mysql-test/r/merge.result:
Auto merged
mysql-test/r/mix2_myisam.result:
Auto merged
mysql-test/r/mysqldump.result:
Auto merged
mysql-test/r/query_cache.result:
Auto merged
mysql-test/r/subselect.result:
Auto merged
mysql-test/valgrind.supp:
Auto merged
mysql-test/r/view.result:
Auto merged
mysql-test/suite/rpl/r/rpl_events.result:
Auto merged
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
Auto merged
mysql-test/t/create.test:
Auto merged
mysql-test/t/mysqldump.test:
Auto merged
mysql-test/t/query_cache.test:
Auto merged
mysql-test/t/subselect.test:
Auto merged
mysql-test/t/variables.test:
Auto merged
mysql-test/t/view.test:
Auto merged
mysys/mf_iocache.c:
Auto merged
mysys/mf_tempfile.c:
Auto merged
mysys/my_atomic.c:
Auto merged
mysys/my_bit.c:
Auto merged
mysys/my_bitmap.c:
Auto merged
mysys/my_compress.c:
Auto merged
mysys/my_create.c:
Auto merged
mysys/my_delete.c:
Auto merged
mysys/my_error.c:
Auto merged
mysys/my_init.c:
Auto merged
mysys/my_open.c:
Auto merged
mysys/my_realloc.c:
Auto merged
mysys/my_rename.c:
Auto merged
mysys/my_symlink.c:
Auto merged
mysys/my_sync.c:
Auto merged
mysys/my_thr_init.c:
Auto merged
mysys/thr_alarm.c:
Auto merged
mysys/thr_lock.c:
Auto merged
scripts/make_binary_distribution.sh:
Auto merged
server-tools/instance-manager/mysql_connection.cc:
Auto merged
sql/CMakeLists.txt:
Auto merged
sql/Makefile.am:
Auto merged
sql/events.cc:
Auto merged
sql/field.cc:
Auto merged
sql/field.h:
Auto merged
sql/filesort.cc:
Auto merged
sql/gen_lex_hash.cc:
Auto merged
sql/ha_ndbcluster.cc:
Auto merged
sql/ha_partition.h:
Auto merged
sql/handler.h:
Auto merged
sql/item.cc:
Auto merged
sql/item.h:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/item_func.cc:
Auto merged
sql/item_func.h:
Auto merged
sql/item_strfunc.cc:
Auto merged
sql/item_strfunc.h:
Auto merged
sql/item_subselect.cc:
Auto merged
sql/lock.cc:
Auto merged
sql/log.cc:
Auto merged
sql/log_event.cc:
Auto merged
sql/net_serv.cc:
Auto merged
sql/opt_range.cc:
Auto merged
sql/partition_info.cc:
Auto merged
sql/rpl_injector.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/slave.cc:
Auto merged
sql/slave.h:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_acl.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_cache.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_delete.cc:
Auto merged
sql/sql_load.cc:
Auto merged
sql/sql_plugin.cc:
Auto merged
sql/sql_prepare.cc:
Auto merged
sql/sql_repl.cc:
Auto merged
sql/sql_test.cc:
Auto merged
sql/sql_union.cc:
Auto merged
sql/sql_update.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
sql/table.cc:
Auto merged
sql/table.h:
Auto merged
sql/unireg.cc:
Auto merged
sql/share/errmsg.txt:
Auto merged
storage/csv/ha_tina.cc:
Auto merged
storage/csv/ha_tina.h:
Auto merged
storage/myisam/CMakeLists.txt:
Auto merged
storage/myisam/ft_boolean_search.c:
Auto merged
storage/myisam/ft_eval.c:
Auto merged
storage/myisam/ft_nlq_search.c:
Auto merged
storage/myisam/ft_parser.c:
Auto merged
storage/myisam/ft_static.c:
Auto merged
storage/myisam/ft_stopwords.c:
Auto merged
storage/myisam/ft_test1.c:
Auto merged
storage/myisam/ft_update.c:
Auto merged
storage/myisam/ha_myisam.cc:
Auto merged
storage/myisam/mi_check.c:
Auto merged
storage/myisam/mi_create.c:
Auto merged
storage/myisam/mi_delete.c:
Auto merged
storage/myisam/mi_delete_all.c:
Auto merged
storage/myisam/mi_dynrec.c:
Auto merged
storage/myisam/mi_key.c:
Auto merged
storage/myisam/mi_packrec.c:
Auto merged
storage/myisam/mi_range.c:
Auto merged
storage/myisam/mi_search.c:
Auto merged
storage/myisam/mi_test1.c:
Auto merged
storage/myisam/mi_test2.c:
Auto merged
storage/myisam/mi_test3.c:
Auto merged
storage/myisam/mi_unique.c:
Auto merged
storage/myisam/mi_write.c:
Auto merged
storage/myisam/myisamchk.c:
Auto merged
storage/myisam/myisamdef.h:
Auto merged
storage/myisam/myisampack.c:
Auto merged
storage/myisam/sort.c:
Auto merged
storage/myisam/sp_test.c:
Auto merged
support-files/mysql.spec.sh:
Auto merged
tests/mysql_client_test.c:
Auto merged
configure.in:
Manual merge
dbug/dbug.c:
Restore to original state in Maria tree
The big diff comes from a wrong pull from 5.0 -> 5.1 after backporting dbug to 5.0 from 5.1
include/Makefile.am:
Manual merge
include/my_atomic.h:
Ignore changes
include/my_base.h:
Manual merge
include/my_dbug.h:
Use orginal my_dbug.h from maria tree
include/my_handler.h:
Manual merge
include/my_sys.h:
Manual merge
include/myisam.h:
Manual merge
mysql-test/lib/mtr_report.pl:
Manual merge
mysql-test/r/myisam.result:
Manual merge
mysql-test/suite/binlog/r/binlog_unsafe.result:
Manual merge
mysql-test/suite/binlog/t/binlog_unsafe.test:
Manual merge
mysql-test/suite/rpl/r/rpl_row_flsh_tbls.result:
Manual merge
mysql-test/suite/rpl/r/rpl_switch_stm_row_mixed.result:
No changes
mysql-test/suite/rpl/t/rpl_row_flsh_tbls.test:
Manual merge
mysql-test/t/change_user.test:
Manual merge
mysql-test/t/disabled.def:
Manual merge
mysql-test/t/merge.test:
No changes
mysql-test/t/myisam.test:
Manual merge
mysys/Makefile.am:
Manual merge
mysys/array.c:
Manual merge
mysys/mf_keycache.c:
Manual merge
mysys/my_getsystime.c:
Manual merge
mysys/my_handler.c:
Manual merge
mysys/my_pread.c:
Manual merge
mysys/safemalloc.c:
Manual merge
sql/ha_partition.cc:
Manual merge
sql/handler.cc:
Manual merge
sql/lex.h:
Manual merge
sql/mysql_priv.h:
Manual merge
sql/mysqld.cc:
Manual merge
sql/set_var.h:
Manual merge
sql/sql_class.cc:
Manual merge
sql/sql_insert.cc:
Manual merge
sql/sql_parse.cc:
Manual merge
sql/sql_select.cc:
Manual merge
sql/sql_show.cc:
Manual merge
sql/sql_table.cc:
Manual merge
storage/myisam/mi_checksum.c:
No changes
storage/myisam/mi_extra.c:
Manual merge
storage/myisam/mi_open.c:
Manual merge
storage/myisammrg/ha_myisammrg.cc:
Manual merge
strings/strmake.c:
No changes
into host.loc:/home/uchum/work/5.1-opt
client/mysqltest.c:
Auto merged
mysql-test/r/information_schema.result:
Auto merged
mysql-test/t/information_schema.test:
Auto merged
sql/item.cc:
Auto merged
sql/log.cc:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/sql_acl.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_delete.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_prepare.cc:
Auto merged
sql/sql_show.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_update.cc:
Auto merged
into stella.local:/home2/mydev/mysql-5.1-axmrg
mysql-test/t/query_cache.test:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/sql_delete.cc:
Auto merged
mysql-test/r/query_cache.result:
SCCS merged
into stella.local:/home2/mydev/mysql-5.1-axmrg
mysql-test/r/federated.result:
Auto merged
mysql-test/t/federated.test:
Auto merged
sql/sql_delete.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_update.cc:
Auto merged
storage/federated/ha_federated.cc:
Auto merged
mysql-test/suite/binlog/r/binlog_unsafe.result:
Manual merge
mysql-test/suite/binlog/t/binlog_unsafe.test:
Manual merge
into magare.gmz:/home/kgeorge/mysql/work/B26461-5.1-opt
CMakeLists.txt:
Auto merged
include/config-win.h:
Auto merged
include/my_global.h:
Auto merged
sql/procedure.h:
Auto merged
sql/sql_acl.cc:
Auto merged
sql/sql_acl.h:
Auto merged
sql/sql_analyse.cc:
Auto merged
sql/sql_analyse.h:
Auto merged
sql/sql_db.cc:
Auto merged
sql/sql_delete.cc:
Auto merged
sql/sql_load.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_update.cc:
Auto merged
sql/handler.h:
merged bug 26461 to 5.1-opt
sql/mysql_priv.h:
merged bug 26461 to 5.1-opt
sql/sql_base.cc:
merged bug 26461 to 5.1-opt
sql/sql_prepare.cc:
merged bug 26461 to 5.1-opt
The bool data type was redefined to BOOL (4 bytes on windows).
Removed the #define and fixed some of the warnings that were uncovered
by this.
Note that the fix also disables 2 warnings :
4800 : 'type' : forcing value to bool 'true' or 'false' (performance warning)
4805: 'operation' : unsafe mix of type 'type' and type 'type' in operation
These warnings will be handled in a separate bug, as they are performance related or bogus.
Fixed to int the return type of functions that return more than
2 distinct values.
CMakeLists.txt:
Bug #26461: disable the C4800 and C4805 warnings temporarily
include/config-win.h:
Bug #26461:
- no need for this define for Windows.
- windows C++ compilers have a bool type
include/my_global.h:
Bug #26461: removed bool_defined (no longer needed)
sql/handler.h:
Bug #26461: bool functions must return boolean values
sql/mysql_priv.h:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/procedure.h:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/sql_acl.cc:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/sql_acl.h:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/sql_analyse.cc:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/sql_analyse.h:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/sql_base.cc:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/sql_db.cc:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/sql_delete.cc:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/sql_load.cc:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/sql_parse.cc:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/sql_prepare.cc:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
sql/sql_update.cc:
Bug #26461: fixed return type of functions that return more than
2 distinct values.
binlog_format=mixed
Statement-based replication of DELETE ... LIMIT, UPDATE ... LIMIT,
INSERT ... SELECT ... LIMIT is not safe as order of rows is not
defined.
With this fix, we issue a warning that this statement is not safe to
replicate in statement mode, or go to row-based mode in mixed mode.
Note that we may consider a statement as safe if ORDER BY primary_key
is present. However it may confuse users to see very similiar statements
replicated differently.
Note 2: regular UPDATE statement (w/o LIMIT) is unsafe as well, but
this patch doesn't address this issue. See comment from Kristian
posted 18 Mar 10:55.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Updated a test case according to fix for BUG#34768:
INSERT ... SELECT ... LIMIT is now replicated in row mode.
mysql-test/suite/binlog/r/binlog_unsafe.result:
A test case for BUG#34768.
mysql-test/suite/binlog/t/binlog_unsafe.test:
A test case for BUG#34768.
sql/sql_delete.cc:
Statement-based replication of DELETE ... LIMIT is not safe as order of
rows is not defined, so in mixed mode we go to row-based.
sql/sql_insert.cc:
Statement-based replication of INSERT ... SELECT ... LIMIT is not safe
as order of rows is not defined, so in mixed mode we go to row-based.
sql/sql_update.cc:
Statement-based replication of UPDATE ... LIMIT is not safe as order of
rows is not defined, so in mixed mode we go to row-based.
