Previously multiple threads were allowed to load histograms concurrently.
There were no known problems caused by this. But given amount of data
races in this code, it'd happen sooner or later.
To avoid scalability bottleneck, histograms loading is protected by
per-TABLE_SHARE atomic variable.
Whenever histograms were loaded by preceding statement (hot-path), a
scalable load-acquire check is performed.
Whenever histograms have to be loaded anew, mutual exclusion for loaders
is established by atomic variable. If histograms are being loaded
concurrently, statement waits until load is completed.
- Table_statistics::total_hist_size moved to TABLE_STATISTICS_CB: only
meaningful within TABLE_SHARE (not used for collected stats).
- TABLE_STATISTICS_CB::histograms_can_be_read and
TABLE_STATISTICS_CB::histograms_are_read are replaced with a tri state
atomic variable.
- Simplified away alloc_histograms_for_table_share().
Note: there's still likely a data race if a thread attempts accessing
histograms data after it failed to load it (because of concurrent load).
It was there previously and goes out of the scope of this effort. One way
of fixing it could be reviving TABLE::histograms_are_read and adding
appropriate checks whenever it is needed.
Part of MDEV-19061 - table_share used for reading statistical tables is
not protected
Previously multiple threads were allowed to load statistics concurrently.
There were no known problems caused by this. But given amount of data
races in this code, it'd happen sooner or later.
To avoid scalability bottleneck, statistics loading is protected by
per-TABLE_SHARE atomic variable.
Whenever statistics were loaded by preceding statement (hot-path), a
scalable load-acquire check is performed.
Whenever statistics have to be loaded anew, mutual exclusion for loaders
is established by atomic variable. If statistics are being loaded
concurrently, statement waits until load is completed.
TABLE_STATISTICS_CB::stats_can_be_read and
TABLE_STATISTICS_CB::stats_is_read are replaced with a tri state atomic
variable.
Part of MDEV-19061 - table_share used for reading statistical tables is
not protected
only MDL-prelock but do not open FK child tables for read-only (RESTRICT)
FK actions.
Tables still needs to be opened for CASCADE actions, see 9180e8666b
The issue here is the wrong estimate of the cardinality of a partial join,
the cardinality is too high because the function table_cond_selectivity()
returns an absurd number 100 while selectivity cannot be greater than 1.
When accessing table t by outer reference t1.a via index we do not perform any
range analysis for t. Yet we see TABLE::quick_key_parts[key] and
TABLE->quick_rows[key] contain a non-zero value though these should have been
remained untouched and equal to 0.
Thus real cause of the problem is that TABLE::init does not clean the arrays
TABLE::quick_key_parts[] and TABLE::>quick_rows[].
It should have done it because the TABLE structure created for any
instance of a table can be reused for many queries.
The parser returned a syntax error message for the queries with join
expressions like this t1 JOIN t2 [LEFT | RIGHT] JOIN t3 ON ... ON ... when
the second operand of the outer JOIN operation with ON clause was another
join expression with ON clause. In this expression the JOIN operator is
right-associative, i.e. expression has to be parsed as the expression
t1 JOIN (t2 [LEFT | RIGHT] JOIN t3 ON ... ) ON ...
Such join expressions are hard to parse because the outer JOIN is
left-associative if there is no ON clause for the first outer JOIN operator.
The patch implements the solution when the JOIN operator is always parsed
as right-associative and builds first the right-associative tree. If it
happens that there is no corresponding ON clause for this operator the
tree is converted to left-associative.
The idea of the solution was taken from the patch by Martin Hansson
"WL#8083: Fixed the join_table rule" from MySQL-8.0 code line.
As the grammar rules related to join expressions in MySQL-8.0 and
MariaDB-5.5+ are quite different MariaDB solution could not borrow
any code from the MySQL-8.0 solution.
There were two newly enabled warnings:
1. cast for a function pointers. Affected sql_analyse.h, mi_write.c
and ma_write.cc, mf_iocache-t.cc, mysqlbinlog.cc, encryption.cc, etc
2. memcpy/memset of nontrivial structures. Fixed as:
* the warning disabled for InnoDB
* TABLE, TABLE_SHARE, and TABLE_LIST got a new method reset() which
does the bzero(), which is safe for these classes, but any other
bzero() will still cause a warning
* Table_scope_and_contents_source_st uses `TABLE_LIST *` (trivial)
instead of `SQL_I_List<TABLE_LIST>` (not trivial) so it's safe to
bzero now.
* added casts in debug_sync.cc and sql_select.cc (for JOIN)
* move assignment method for MDL_request instead of memcpy()
* PARTIAL_INDEX_INTERSECT_INFO::init() instead of bzero()
* remove constructor from READ_RECORD() to make it trivial
* replace some memcpy() with c++ copy assignments
always logged properly with binlog_row_image=MINIMAL
There are two issues fixed in this commit.
The first is an observation of a multi-table UPDATE binlogged
in row-format in binlog_row_image=MINIMAL mode. While the UPDATE aims
at a table with an ON-UPDATE attribute its binlog after-image misses
to record also installed default value.
The reason for that turns out missed marking of default-capable fields
in TABLE::write_set.
This is fixed to mark such fields similarly to 10.2's MDEV-10134 patch (db7edfed17)
that introduced it. The marking follows up 93d1e5ce0b841bed's idea
to exploit TABLE:rpl_write_set introduced there though,
and thus does not mess (in 10.1) with the actual MDEV-10134 agenda.
The patch makes formerly arg-less TABLE::mark_default_fields_for_write()
to accept an argument which would be TABLE:rpl_write_set.
The 2nd issue is extra columns in in binlog_row_image=MINIMAL before-image
while merely a packed primary key is enough. The test main.mysqlbinlog_row_minimal
always had a wrong result recorded.
This is fixed to invoke a function that intended for read_set
possible filtering and which is called (supposed to) in all type of MDL, UPDATE
including; the test results have gotten corrected.
At *merging* from 10.1->10.2 the 1st "main" part of the patch is unnecessary
since the bug is not observed in 10.2, so only hunks from
sql/sql_class.cc
are required.
ALTER TABLE locks the table with TL_READ_NO_INSERT, to prevent the
source table modifications while it's being copied. But there's an
indirect way of modifying a table, via cascade FK actions.
After previous commits, an attempt to modify an FK parent table
will cause FK children to be prelocked, so the table-being-altered
cannot be modified by a cascade FK action, because ALTER holds a
lock and prelocking will wait.
But if a new FK is being added by this very ALTER, then the target
table is not locked yet (it's a temporary table). So, we have to
lock FK parents explicitly.
The problem was that join_columns creation was not finished due to error of notfound column in USING, but next execution tried to use join_columns lists.
Solution is cleanup the lists on error. It can eat memory in statement MEM_ROOT but it is an error and error will be fixed or statement/procedure removed/altered.
For this case we have a view that is mergeable but we are not able to merge it in the
parent select because that would exceed the maximum tables allowed in the join list, so we
materialise this view
TABLE_LIST::dervied is NULL for such views, it is only set for views which have ALGORITHM=TEMPTABLE
Fixed by making sure TABLE_LIST::derived is set for views that could not be merged
If translation table present when we materialize the derived table then
change it to point to the materialized table.
Added debug info to see really what happens with what derived.
IS DROPPED
ANALYSIS:
=========
It is advised not to tamper with the system tables.
When primary key is dropped from a system table, certain
operations on the table which tries to access the table key
information may lead to server exit.
FIX:
====
An appropriate error is now reported in such a case.
Functions from sql/statistics.cc don't seem to expect
stat tables to fail or to have inadequate structure.
Table open errors suppressed and some validity
checks added. Invalid tables reported to the server
log.
This fix also fixes a connection hang when trying to do INSERT DELAYED to a crashed table.
Added crash_mysqld.inc to allow easy crash+restart of mysqld
NOT NULL constraint must be checked *after* the BEFORE triggers.
That is for INSERT and UPDATE statements even NOT NULL fields
must be able to store a NULL temporarily at least while
BEFORE INSERT/UPDATE triggers are running.
changes in query execution plans.
Fixed by introducing table->rpl_write_set which holds which columns should
be stored in the binary log.
Other things:
- Removed some not needed references to read_set and write_set to make
code really changing read_set and write_set easier to read
(in opt_range.cc)
- Added error handling of failed unpack_current_row()
- Added missing call to mark_columns_needed_for_insert() for DELAYED INSERT
- Removed not used functions in_read_set() and in_write_set()
- In rpl_record.cc, removed not used variable error
Depending on which binlog_row_image we are using, we must
mark columns which to update differently both in the before image
as well as the after image.
