sql_show.cc during rqg_info_schema test on Windows".
Ensure we do not access freed memory when filling
information_schema.views when one of the views
could not be properly opened.
The thing is that the following attributes are fixed (remembered) when a trigger
is created:
- character_set_client
- character_set_results
- collation_connection
There are two triggers created in mysql-test/include/mtr_warnings.sql.
They were created using "current default" character set / collation.
is_triggers.test shows definition of these triggers including recorded
character set information.
The problem was that if "current default" changed, the recorded character
set information was not accurate.
There might be two ways to fix that:
a) update is_triggers.test so that it does not put character-set information
into result-file;
b) update mtr_warnings.sql so that the triggers are created using
hard-coded character sets.
This patch implements option b).
This is a port of the following changeset from
5.1/storage/innobase to 5.1/storage/innodb_plugin:
------------------------------------------------------------
revno: 3626
revision-id: vasil.dimov@oracle.com-20101013171859-gi9n558yj89x9v3w
parent: klewis@mysql.com-20101012175933-ce9kkgl0z8oeqffa
committer: Vasil Dimov <vasil.dimov@oracle.com>
branch nick: mysql-5.1-innodb
timestamp: Wed 2010-10-13 20:18:59 +0300
message:
Fix Bug#56143 too many foreign keys causes output of show create table to become invalid
Just remove the check whether the file is "too big".
A similar code exists in ha_innobase::update_table_comment() but that
method does not seem to be used.
Also use a CREATE statement with all the FKs instead of ALTERing the
table 550 times because it is faster.
The root of the problem is that to interrupt a slave SQL thread
wait, the STOP SLAVE implementation uses thd->awake(THD::NOT_KILLED).
This appears as a spurious wakeup (e.g. from a sleep on a
condition variable) to the code that the slave SQL thread is
executing at the time of the STOP. If the code is not written
to be spurious-wakeup safe, unexpected behavior can occur. For
the reported case, this problem led to an infinite loop around
the interruptible_wait() function in item_func.cc (SLEEP()
function implementation). The loop was not being properly
restarted and, consequently, would not come to an end. Since the
SLEEP function sleeps on a timed event in order to be killable
and to perform periodic checks until the requested time has
elapsed, the spurious wake up was causing the requested sleep
time to be reset every two seconds.
The solution is to calculate the requested absolute time only
once and to ensure that the thread only sleeps until this
time is elapsed. In case of a spurious wake up, the sleep is
restarted using the previously calculated absolute time. This
restores the behavior present in previous releases. If a slave
thread is executing a SLEEP function, a STOP SLAVE statement
will wait until the time requested in the sleep function
has elapsed.
Just remove the check whether the file is "too big".
A similar code exists in ha_innobase::update_table_comment() but that
method does not seem to be used.
thd->in_sub_stmt || (thd->state..
OPTIMIZE TABLE is not directly supported by InnoDB. Instead,
recreate and analyze of the table is done. After recreate,
the table is closed and locks are released before the table
is reopened and locks re-acquired for the analyze phase.
This assertion was triggered if OPTIMIZE TABLE failed to
acquire thr_lock locks before starting the analyze phase.
The assertion tests (among other things) that there no
active statement transaction. However, as part of acquiring
the thr_lock lock, external_lock() is called for InnoDB
tables and this causes a statement transaction to be started.
If thr_multi_lock() later fails (e.g. due to timeout),
the failure handling code causes this assert to be triggered.
This patch fixes the problem by doing rollback of the
current statement transaction in case open_ltable (used by
OPTIMIZE TABLE) fails to acquire thr_lock locks.
Test case added to lock_sync.test.
heavy load".
rpl_row_sp003.test has sporadically failed when run on machine
under heavy load or on slow hardware.
This patch fixes races in the test which were causing these
failures and also removes unnecessary 100 second wait from it.
Problem: if multibyte and binary string arguments passed to
RPAD(), LPAD() or INSERT() functions, they might return
wrong results or even lead to a server crash due to missed
character set convertion.
Fix: perform the convertion if necessary.
After ALTER TABLE which changed only table's metadata, row-based
binlog sometimes got corrupted since the tablemap was unexpectedly
set to 0 for subsequent updates to the same table.
ALTER TABLE which changed only table's metadata always reset
table_map_id for the table share to 0. Despite the fact that
0 is a valid value for table_map_id, this step caused problems
as it could have created situation in which we had more than
one table share with table_map_id equal 0. If more than one
table with table_map_id are 0 were updated in the same statement,
updates to these different tables were written into the same
rows event. This caused slave server to crash.
This bug happens only on 5.1. It doesn't affect 5.5+.
This patch solves this problem by ensuring that ALTER TABLE
statements which change metadata only never reset table_map_id
to 0. To do this it changes reopen_table() to correctly use
refreshed table_map_id value instead of using the old one/
resetting it.
When slave executes a transaction bigger than slave's max_binlog_cache_size,
slave will crash. It is caused by the assert that server should only roll back
the statement but not the whole transaction if the error ER_TRANS_CACHE_FULL
happens. But slave sql thread always rollbacks the whole transaction when
an error happens.
Ather this patch, we always clear any error set in sql thread(it is different
from the error in 'SHOW SLAVE STATUS') and it is cleared before rolling back
the transaction.
Only wait for a single debug signal at a time as the signal state
is global. Also, do not activate the query cache debug sync points
if the thread has no associated THD session.
Issue an error if user specifies multiple commands to run.
Also there was an unnoticed bug that DO_CHECK was actually 0 which lead
to wrong actions in some cases.
The mysqlcheck.test contained commands with the suspicious meaning
for the above reason. Extra commands removed from there.
per-file commands:
client/mysqlcheck.c
Bug#35269 mysqlcheck behaves different depending on order of parameters
Drop with an error if multiple commands.
mysql-test/r/mysqlcheck.result
Bug#35269 mysqlcheck behaves different depending on order of parameters
result completed.
mysql-test/t/mysqlcheck.test
Bug#35269 mysqlcheck behaves different depending on order of parameters
testcase added.
not-working commands removed from some mysqlcheck calls.
The problem was that threads waiting on the query cache lock
are not easily seen due to the lack of a state indicating that
the thread is waiting on the said lock. This made it difficult
for users to quickly spot (for example, via SHOW PROCESSLIST)
a query cache contention problem.
The solution is to update the thread state when the query cache
lock needs to be acquired. Whenever the lock is to be acquired,
the thread state is updated to "Waiting for query cache lock"
and is reset once the lock is granted or the wait is interrupted.
The intention is to make query cache related hangs more evident.
To further investigate query cache related locking problems, one
may use PERFORMANCE_SCHEMA to track the overhead associated with
the locking bits and determine which particular lock is being a
contention point.
The coalesce function returned DATETIME type due to a DATETIME argument, but
since it's not a date/time function it can't return correct int value for
it. Nevertheless Item_datetime_cache was chosen to cache coalesce's result
and that led to a wrong result.
Now Item_datetime_cache is used only for those function that could return
correct int representation of DATETIME values.
discover its existence".
The problem was that user without any privileges on
routine was able to find out whether it existed or not.
DROP FUNCTION and DROP PROCEDURE statements were
checking if routine being dropped existed and reported
ER_SP_DOES_NOT_EXIST error/warning before checking
if user had enough privileges to drop it.
This patch solves this problem by changing code not to
check if routine exists before checking if user has enough
privileges to drop it. Moreover we no longer perform this
check using a separate call instead we rely on
sp_drop_routine() returning SP_KEY_NOT_FOUND if routine
doesn't exist.
This change also simplifies one of upcoming patches
refactoring global read lock implementation.
The error message for ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE was
hard coded. Additionally, the same error was used in three
separate error symptoms: 1. when heartbeat period exceeds the
value of slave_net_timeout, 2. when it is smaller than 1
milisecond and 3. when it was not in range, ie, either negative
or greater than the maximum allowed.
We fix this by splitting into three distinct errors and by
removing the message from the source code and moving it to the
errmsg-utf8.txt file.
