We need to release global system variables mutex before
doing wsrep_init to avoid race with next show status and
we need to save wsrep_on value as it is changed on wsrep_init.
Added test case.
For MDEV-15955, the fix in create_tmp_field_from_item() would cause a
compilation error. After a discussion with Alexander Barkov, the fix
was omitted and only the test case was kept.
In 10.3 and later, MDEV-15955 is fixed properly by overriding
create_tmp_field() in Item_func_user_var.
There were two problems:
(1) If user wanted same time zone information on all nodes in the Galera
cluster all updates were not replicated as time zone information was
stored on MyISAM tables. This is fixed on Galera by altering time zone
tables to InnoDB while they are modified.
(2) If user wanted different time zone information to nodes in the Galera
cluster TRUNCATE TABLE for time zone tables was replicated by Galera
destroying time zone information from other nodes. This is fixed
on Galera by introducing new option for mysql_tzinfo_to_sql_symlink
tool --skip-write-binlog to disable Galera replication while
time zone tables are modified.
Changes to be committed:
modified: mysql-test/r/mysql_tzinfo_to_sql_symlink.result
modified: mysql-test/suite/wsrep/r/mysql_tzinfo_to_sql_symlink.result
new file: mysql-test/suite/wsrep/r/mysql_tzinfo_to_sql_symlink_skip.result
new file: mysql-test/suite/wsrep/t/mysql_tzinfo_to_sql_symlink_skip.test
modified: sql/tztime.cc
This is 10.4 version of commit fa74088838
There were two problems:
(1) If user wanted same time zone information on all nodes in the Galera
cluster all updates were not replicated as time zone information was
stored on MyISAM tables. This is fixed on Galera by altering time zone
tables to InnoDB while they are modified.
(2) If user wanted different time zone information to nodes in the Galera
cluster TRUNCATE TABLE for time zone tables was replicated by Galera
destroying time zone information from other nodes. This is fixed
on Galera by introducing new option for mysql_tzinfo_to_sql_symlink
tool --skip-write-binlog to disable Galera replication while
time zone tables are modified.
Changes to be committed:
modified: mysql-test/r/mysql_tzinfo_to_sql_symlink.result
modified: mysql-test/suite/wsrep/r/mysql_tzinfo_to_sql_symlink.result
new file: mysql-test/suite/wsrep/r/mysql_tzinfo_to_sql_symlink_skip.result
new file: mysql-test/suite/wsrep/t/mysql_tzinfo_to_sql_symlink_skip.test
modified: sql/tztime.cc
Problem was that tests select INFORMATION_SCHEMA.PROCESSLIST processes
from user system user and empty state. Thus, there is not clear
state for slave threads.
Changes:
- Added new status variables that store current amount of applier threads
(wsrep_applier_thread_count) and rollbacker threads
(wsrep_rollbacker_thread_count). This will make clear how many slave threads
of certain type there is.
- Added THD state "wsrep applier idle" when applier slave thread is
waiting for work. This makes finding slave/applier threads easier.
- Added force-restart option for mtr to always restart servers between tests
to avoid race on start of the test
- Added wait_condition_with_debug to wait until the passed statement returns
true, or the operation times out. If operation times out, the additional error
statement will be executed
Changes to be committed:
new file: mysql-test/include/force_restart.inc
new file: mysql-test/include/wait_condition_with_debug.inc
modified: mysql-test/mysql-test-run.pl
modified: mysql-test/suite/galera/disabled.def
modified: mysql-test/suite/galera/r/MW-336.result
modified: mysql-test/suite/galera/r/galera_kill_applier.result
modified: mysql-test/suite/galera/r/galera_var_slave_threads.result
new file: mysql-test/suite/galera/t/MW-336.cnf
modified: mysql-test/suite/galera/t/MW-336.test
modified: mysql-test/suite/galera/t/galera_kill_applier.test
modified: mysql-test/suite/galera/t/galera_parallel_autoinc_largetrx.test
modified: mysql-test/suite/galera/t/galera_parallel_autoinc_manytrx.test
modified: mysql-test/suite/galera/t/galera_var_slave_threads.test
modified: mysql-test/suite/wsrep/disabled.def
modified: mysql-test/suite/wsrep/r/variables.result
modified: mysql-test/suite/wsrep/t/variables.test
modified: sql/mysqld.cc
modified: sql/wsrep_mysqld.cc
modified: sql/wsrep_mysqld.h
modified: sql/wsrep_thd.cc
modified: sql/wsrep_var.cc
* MDEV-16509 Improve wsrep commit performance with binlog disabled
Release commit order critical section early after trx_commit_low() if
binlog is not transaction coordinator. In order to avoid two phase commit,
binlog_hton is not registered for THD during IO_CACHE population.
Implemented a test which verifies that the transactions release
commit order early.
This optimization will change behavior during recovery as the commit
is not two phase when binlog is off. Fixed and recorded wsrep-recover-v25
and wsrep-recover to match the behavior.
* MDEV-18730 Ordering for wsrep binlog group commit
Previously out of order execution was allowed for wsrep commits.
Established proper ordering by populating wait_for_commit
for every wsrep THD and making group commit leader to wait for
prior commits before proceeding to trx_group_commit_leader().
* MDEV-18730 Added a test case to verify correct commit ordering
* MDEV-16509, MDEV-18730 Review fixes
Use WSREP_EMULATE_BINLOG() macro to decide if the binlog_hton
should be registered. Whitespace/syntax fixes and cleanups.
* MDEV-16509 Require binlog for galera_var_innodb_disallow_writes test
If the commit to InnoDB is done in one phase, the native InnoDB behavior
is that the transaction is committed in memory before it is persisted to
disk. This means that the innodb_disallow_writes=ON may not prevent
transaction to become visible to other readers before commit is completely
over. On the other hand, if the commit is two phase (as it is with binlog),
the transaction will be blocked in prepare phase.
Fixed the test to use binlog, which enforces two phase commit, which
in turn makes commit to block before the changes become visible to
other connections. This guarantees that the test produces expected
result.
Backported wsrep-recover test from 10.4 to test the wsrep recovery
after database shutdown or crash. Renamed the test to wsrep-recover-v25
to avoid conflicts with existing test in 10.4 and to provide coverage
for wsrep-API v25 compatible behavior.
The test case in 10.2 is simpler because out of order prepare
step cannot happen, the commit order critical section is grabbed
before prepare phase.
Test is not recorded since it does not produce expected result.
The second line of changes related to replacing xtrabackup with
mariabackup:
1) All unnecessary references to xtrabackup are removed from
the documentation, from some comments, from the control files
that are used to prepare the packages.
2) Made corrections of the tests from the galera_3nodes suite
that mentioned xtrabackup or the old (associated with xtrabackup)
version of innobackupex.
3) Fixed flaws in the galera_3nodes mtr suite control scripts,
because of which they could not work with mariabackup.
4) Fixed numerous bugs in the SST scripts and in the mtr test
files (galera_3nodes mtr suite) that prevented the use of Galera
with IPv6 addresses.
5) Fixed flaws in tests for rsync and mysqldump (for galera_3nodes
mtr tests suite). These tests were not performed successfully without
these fixes.
https://jira.mariadb.org/browse/MDEV-17835
MDEV-17058: Test failure on wsrep.variables
MDEV-17060: Test failure on galera.galera_var_slave_threads
Fix incorrect calculation of increased applier (slave) threads.
Note that increase change takes effect "immediately" but we should
use proper wait condition to wait it. Reducing the number of
slave threads is not immediate as thread will only exit after a
replication event.
MDEV-17058: Test failure on wsrep.variables
MDEV-17060: Test failure on galera.galera_var_slave_threads
Fix incorrect calculation of increased applier (slave) threads.
Note that increase change takes effect "immediately" but we should
use proper wait condition to wait it. Reducing the number of
slave threads is not immediate as thread will only exit after a
replication event.
For running the Galera tests, the variable my_disable_leak_check
was set to true in order to avoid assertions due to memory leaks
at shutdown.
Some adjustments due to MDEV-13625 (merge InnoDB tests from MySQL 5.6)
were performed. The most notable behaviour changes from 10.0 and 10.1
are the following:
* innodb.innodb-table-online: adjustments for the DROP COLUMN
behaviour change (MDEV-11114, MDEV-13613)
* innodb.innodb-index-online-fk: the removal of a (1,NULL) record
from the result; originally removed in MySQL 5.7 in the
Oracle Bug #16244691 fix
377774689b
* innodb.create-index-debug: disabled due to MDEV-13680
(the MySQL Bug #77497 fix was not merged from 5.6 to 5.7.10)
* innodb.innodb-alter-autoinc: MariaDB 10.2 behaves like MySQL 5.6/5.7,
while MariaDB 10.0 and 10.1 assign different values when
auto_increment_increment or auto_increment_offset are used.
Also MySQL 5.6/5.7 exhibit different behaviour between
LGORITHM=INPLACE and ALGORITHM=COPY, so something needs to be tested
and fixed in both MariaDB 10.0 and 10.2.
* innodb.innodb-wl5980-alter: disabled because it would trigger an
InnoDB assertion failure (MDEV-13668 may need additional effort in 10.2)
