Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
The problem was that TRUNCATE TABLE didn't take a exclusive
lock on a table if it resorted to truncating via delete of
all rows in the table. Specifically for InnoDB tables, this
could break proper isolation as InnoDB ends up aborting some
granted locks when truncating a table.
The solution is to take a exclusive metadata lock before
TRUNCATE TABLE can proceed. This guarantees that no other
transaction is using the table.
Incompatible change: Truncate via delete no longer fails
if sql_safe_updates is activated (this was a undocumented
side effect).
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
The test was used to fail because of
UPDATE t3,t4 SET t3.a=t4.a + bug27417(1);
did not prescribe the order of two row operations implied by the update.
Fixed with forcing the order with adding a where condition w/o
affecting the former bug fixes logics.
Clarified error messages related to unsafe statements:
- avoid the internal technical term "row injection"
- use 'binary log' instead of 'binlog'
- avoid the word 'unsafeness'
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
2617.31.12, 2617.31.15, 2617.31.15, 2617.31.16, 2617.43.1
- initial changeset that introduced the fix for
Bug#989 and follow up fixes for all test suite failures
introduced in the initial changeset.
------------------------------------------------------------
revno: 2617.31.1
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 4284-6.0
timestamp: Fri 2009-03-06 19:17:00 -0300
message:
Bug#989: If DROP TABLE while there's an active transaction, wrong binlog order
WL#4284: Transactional DDL locking
Currently the MySQL server does not keep metadata locks on
schema objects for the duration of a transaction, thus failing
to guarantee the integrity of the schema objects being used
during the transaction and to protect then from concurrent
DDL operations. This also poses a problem for replication as
a DDL operation might be replicated even thought there are
active transactions using the object being modified.
The solution is to defer the release of metadata locks until
a active transaction is either committed or rolled back. This
prevents other statements from modifying the table for the
entire duration of the transaction. This provides commitment
ordering for guaranteeing serializability across multiple
transactions.
- Incompatible change:
If MySQL's metadata locking system encounters a lock conflict,
the usual schema is to use the try and back-off technique to
avoid deadlocks -- this schema consists in releasing all locks
and trying to acquire them all in one go.
But in a transactional context this algorithm can't be utilized
as its not possible to release locks acquired during the course
of the transaction without breaking the transaction commitments.
To avoid deadlocks in this case, the ER_LOCK_DEADLOCK will be
returned if a lock conflict is encountered during a transaction.
Let's consider an example:
A transaction has two statements that modify table t1, then table
t2, and then commits. The first statement of the transaction will
acquire a shared metadata lock on table t1, and it will be kept
utill COMMIT to ensure serializability.
At the moment when the second statement attempts to acquire a
shared metadata lock on t2, a concurrent ALTER or DROP statement
might have locked t2 exclusively. The prescription of the current
locking protocol is that the acquirer of the shared lock backs off
-- gives up all his current locks and retries. This implies that
the entire multi-statement transaction has to be rolled back.
- Incompatible change:
FLUSH commands such as FLUSH PRIVILEGES and FLUSH TABLES WITH READ
LOCK won't cause locked tables to be implicitly unlocked anymore.
Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
The BINLOG statement was sharing too much code with the slave SQL thread, introduced with
the patch for Bug#32407. This caused statements to be logged with the wrong server_id, the
id stored inside the events of the BINLOG statement rather than the id of the running
server.
Fix by rearranging code a bit so that only relevant parts of the code are executed by
the BINLOG statement, and the server_id of the server executing the statements will
not be overrided by the server_id stored in the 'format description BINLOG statement'.
Let
- T be a transactional table and N non-transactional table.
- B be begin, C commit and R rollback.
- N be a statement that accesses and changes only N-tables.
- T be a statement that accesses and changes only T-tables.
In RBR, changes to N-tables that happen early in a transaction are not immediately flushed
upon committing a statement. This behavior may, however, break consistency in the presence
of concurrency since changes done to N-tables become immediately visible to other
connections. To fix this problem, we do the following:
. B N N T C would log - B N C B N C B T C.
. B N N T R would log - B N C B N C B T R.
Note that we are not preserving history from the master as we are introducing a commit that
never happened. However, this seems to be more acceptable than the possibility of breaking
consistency in the presence of concurrency.
Let
- T be a transactional table and N non-transactional table.
- B be begin, C commit and R rollback.
- M be a mixed statement, i.e. a statement that updates both T and N.
- M* be a mixed statement that fails while updating either T or N.
This patch restore the behavior presented in 5.1.37 for rows either produced in
the RBR or MIXED modes, when a M* statement that happened early in a transaction
had their changes written to the binary log outside the boundaries of the
transaction and wrapped in a BEGIN/ROLLBACK. This was done to keep the slave
consistent with with the master as the rollback would keep the changes on N and
undo them on T. In particular, we do what follows:
. B M* T C would log - B M* R B T C.
Note that, we are not preserving history from the master as we are introducing a
rollback that never happened. However, this seems to be more acceptable than
making the slave diverge. We do not fix the following case:
. B T M* C would log B T M* C.
The slave will diverge as the changes on T tables that originated from the M
statement are rolled back on the master but not on the slave. Unfortunately, we
cannot simply rollback the transaction as this would undo any uncommitted
changes on T tables.
SBR is not considered in this patch because a failing statement is written to
the binary along with the error code and a slave executes and then rolls back
the statement when it has an associated error code, thus undoing the effects
on T. In RBR and MBR, a full-fledged fix will be pushed after the WL 2687.
In RBR, 'DROP TEMPORARY TABLE IF EXISTS...' statement is binlogged when the table
does not exist.
In fact, 'DROP TEMPORARY TABLE ...' statement should never be binlogged in RBR
no matter if the table exists or not.
This patch addresses this by checking whether we are dropping a
temporary table or not, when building the custom drop statement.
When setting AUTOCOMMIT=1 after starting a transaction, the binary log
did not commit the outstanding transaction. The reason was that the binary
log commit function saw the values of the new settings, deciding that there
were nothing to commit.
Fixed the problem by moving the implicit commit to before the thread option
flags were changed, so that the binary log sees the old values of the flags
instead of the values they will take after the statement.
"create as select" (innodb table)
Problem: code constructing "CREATE TABLE..." statement
doesn't take into account that current database is not set
in some cases. That may lead to a server crash.
Fix: check if current database is set.
TRUNCATE TABLE fails to replicate when stmt-based binlogging is not supported.
There were two separate problems with the code, both of which are fixed with
this patch:
1. An error was printed by InnoDB for TRUNCATE TABLE in statement mode when
the in isolation levels READ COMMITTED and READ UNCOMMITTED since InnoDB
does permit statement-based replication for DML statements. However,
the TRUNCATE TABLE is not transactional, but is a DDL, and should therefore
be allowed to be replicated as a statement.
2. The statement was not logged in mixed mode because of the error above, but
the error was not reported to the client.
This patch fixes the problem by treating TRUNCATE TABLE a DDL, that is, it is
always logged as a statement and not reporting an error from InnoDB for TRUNCATE
TABLE.
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
Added cleanup of status variables to the end of binlog_database.
Re-recorded .result file to account for cleanup statement.
NOTE: binlog.binlog_innodb also has had an FLUSH STATUS; statement added to it as well, but
adding this cleanup as a preventative measure.
The Blackhole engine did not support row-based replication
since the delete_row(), update_row(), and the index and range
searching functions were not implemented.
This patch adds row-based replication support for the
Blackhole engine by implementing the two functions mentioned
above, and making the engine pretend that it has found the
correct row to delete or update when executed from the slave
SQL thread by implementing index and range searching functions.
It is necessary to only pretend this for the SQL thread, since
a SELECT executed on the Blackhole engine will otherwise never
return EOF, causing a livelock.
The size of the Innodb_buffer_pool_pages differs by one byte on row versus statement
log, so neuter the last position of the stringified decimal representation. Innobase
says the size isn't very important in any case.
Also, split out the "mixed" format to its own file, as mtr seems to dislike having only
stm and row but not mix.
tables open
When executing a DROP DATABASE statement in ROW mode and having temporary
tables open at the same time, the existance of temporary tables prevent
the server from switching back to row mode after temporarily switching to
statement mode to handle the logging of the statement.
Fixed the problem by removing the code to switch to statement mode and added
code to temporarily disable the binary log while dropping the objects in the
database.
When executing a DROP DATABASE statement in ROW mode and having temporary
tables open at the same time, the existance of temporary tables prevent
the server from switching back to row mode after temporarily switching to
statement mode to handle the logging of the statement.
Fixed the problem by removing the code to switch to statement mode and added
code to temporarily disable the binary log while dropping the objects in the
database.
Problem: binlog_stm_binlog runs INSERT DELAYED queries, and
then prints the contents of the binlog. Before checking the
contents of the binlog, the test waits until the rows have
appeared in the table. However, this is not enough, since
INSERT DELAYED does not write rows to the binlog at the same
time as it writes them to the table. So there is a race.
Fix: Add a FLUSH TABLES before SHOW BINLOG EVENTS. That
waits until the insert_delayed thread is done.
