The test case was missing a wait for the SQL thread to complete its work before checking the value of @@GLOBAL.gtid_slave_pos.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This will make mysql-test-run.pl try to schedule these long-running
(> 60 seconds) tests early in --parallel runs, which helps avoid that
the testsuite gets stuck with a few long-running tests at the end
while most other test workers are idle.
This speed up mtr --parallel=96 with 25 seconds for me.
Reviewed-by: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Make sure the table mysql.gtid_slave_pos is altered to InnoDB before
starting parallel replication. The parallel replication of the suppression
insertion in the test case was trying to update the GTID position in
parallel with the ALTER TABLE, which could occasionally deadlock on the MDL
lock.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
* automatically disable ps2 and cursor protocol when the
select statement returns no result set
* remove manual {disable|enable}_{ps2|cursor}_protocol from around
`select ... into` in tests
* other misc collateral test cleanups
We now allow multitable queries with order by and limit, such as:
delete t1.*, t2.* from t1, t2 order by t1.id desc limit 3;
To predict what rows will be deleted, run the equivalent select:
select t1.*, t2.* from t1, t2 order by t1.id desc limit 3;
Additionally, index hints are now supported with single table delete statements:
delete from t2 use index(xid) order by (id) limit 2;
This approach changes the multi_delete SELECT result interceptor to use a temporary
table to collect row ids pertaining to the rows that will be deleted, rather than
directly deleting rows from the target table(s). Row ids are collected during
send_data, then read during send_eof to delete target rows. In the event that the
temporary table created in memory is not big enough for all matching rows, it is
converted to an aria table.
Other changes:
- Deleting from a sequence now affects zero rows instead of emitting an error
Limitations:
- The federated connector does not create implicit row ids, so we to use a key
when conditionally deleting. See the change in federated_maybe_16324629.test
PURGE BINARY LOGS did not always purge binary logs. This commit fixes
some of the issues and adds notifications if a binary log cannot be
purged.
User visible changes:
- 'PURGE BINARY LOG TO log_name' and 'PURGE BINARY LOGS BEFORE date'
worked differently. 'TO' ignored 'slave_connections_needed_for_purge'
while 'BEFORE' did not. Now both versions ignores the
'slave_connections_needed_for_purge variable'.
- 'PURGE BINARY LOG..' commands now returns 'note' if a binary log cannot
be deleted like
Note 1375 Binary log 'master-bin.000004' is not purged because it is
the current active binlog
- Automatic binary log purges, based on date or size, will write a
note to the error log if a binary log matching the size or date
cannot yet be deleted.
- If 'slave_connections_needed_for_purge' is set from a config or
command line, it is set to 0 if Galera is enabled and 1 otherwise
(old default). This ensures that automatic binary log purge works
with Galera as before the addition of
'slave_connections_needed_for_purge'.
If the variable is changed to 0, a warning will be printed to the error
log.
Code changes:
- Added THD argument to several purge_logs related functions that needed
THD.
- Added 'interactive' options to purge_logs functions. This allowed
me to remove testing of sql_command == SQLCOM_PURGE.
- Changed purge_logs_before_date() to first check if log is applicable
before calling can_purge_logs(). This ensures we do not get a
notification for logs that does not match the remove criteria.
- MYSQL_BIN_LOG::can_purge_log() will write notifications to the user
or error log if a log cannot yet be removed.
- log_in_use() will return reason why a binary log cannot be removed.
Changes to keep code consistent:
- Moved checking of binlog_format for Galera to be after Galera is
initialized (The old check never worked). If Galera is enabled
we now change the binlog_format to ROW, with a warning, instead of
aborting the server. If this change happens a warning will be printed to
the error log.
- Print a warning if Galera or FLASHBACK changes the binlog_format
to ROW. Before it was done silently.
Reviewed by: Sergei Golubchik <serg@mariadb.com>,
Kristian Nielsen <knielsen@knielsen-hq.org>
Builders:
- amd64-fedora-38-last-N-failed
- amd64-debian-10-last-N-failed
erroneously execute MTR for these files:
- rpl/include/rpl_extra_col_master.test
- rpl/include.rpl_binlog_max_cache_size.test
- rpl/include.rpl_charset.test
when these files are changed by a commit.
Changing their extension from *.test to *.inc to avoid this.
- FLUSH GLOBAL STATUS now resets most global_status_vars.
At this stage, this is mainly to be used for testing.
- FLUSH SESSION STATUS added as an alias for FLUSH STATUS.
- FLUSH STATUS does not require any privilege (before required RELOAD).
- FLUSH GLOBAL STATUS requires RELOAD privilege.
- All global status reset moved to FLUSH GLOBAL STATUS.
- Replication semisync status variables are now reset by
FLUSH GLOBAL STATUS.
- In test cases, the only changes are:
- Replace FLUSH STATUS with FLUSH GLOBAL STATUS
- Replace FLUSH STATUS with FLUSH STATUS; FLUSH GLOBAL STATUS.
This was only done in a few tests where the test was using SHOW STATUS
for both local and global variables.
- Uptime_since_flush_status is now always provided, independent if
ENABLED_PROFILING is enabled when compiling MariaDB.
- @@global.Uptime_since_flush_status is reset on FLUSH GLOBAL STATUS
and @@session.Uptime_since_flush_status is reset on FLUSH SESSION STATUS.
- When connected, @@session.Uptime_since_flush_status is set to 0.
This patch augments Gtid_log_event with the user thread-id.
In particular that compensates for the loss of this info in
Rows_log_events.
Gtid_log_event::thread_id gets visible in mysqlbinlog output like
#231025 16:21:45 server id 1 end_log_pos 537 CRC32 0x1cf1d963 GTID 0-1-2 ddl thread_id=10
as a 32 bit unsigned integer. Note this is a 32-bit value, as
the connection id can only be 32 bits (see MDEV-15089 for
details).
While the size of Gtid event has grown by 4 bytes
replication from OLD <-> NEW is not affected by it. This patch
also slightly changes the logic to convert Gtid events to Query
events for older replicas which don't support Gtid. Instead of
hard-coding the padding of the sys var section of the generated
Query event, the length to pad is dynamically calculated based
on the length of the Gtid event.
This work was started by the late Sujatha Sivakumar.
Brandon Nesterenko took it over, reviewed initial patches and
extended the work.
Also thanks to Andrei for his help in finalizing the fixes for
MDEV-33924, which were squashed into this patch.
Reviewed-by:
=============
Andrei Elkin <andrei.elkin@mariadb.com>
Kristian Nielsen <knielsen@knielsen-hq.org>
On Windows systems, occurrences of ERROR_SHARING_VIOLATION due to
conflicting share modes between processes accessing the same file can
result in CreateFile failures.
mysys' my_open() already incorporates a workaround by implementing
wait/retry logic on Windows.
But this does not help if files are opened using shell redirection like
mysqltest traditionally did it, i.e via
--echo exec "some text" > output_file
In such cases, it is cmd.exe, that opens the output_file, and it
won't do any sharing-violation retries.
This commit addresses the issue by introducing a new built-in command,
'write_line', in mysqltest. This new command serves as a brief alternative
to 'write_file', with a single line output, that also resolves variables
like "exec" would.
Internally, this command will use my_open(), and therefore retry-on-error
logic.
Hopefully this will eliminate the very sporadic "can't open file because
it is used by another process" error on CI.
Some fixes related to commit f838b2d799 and
Rows_log_event::do_apply_event() and Update_rows_log_event::do_exec_row()
for system-versioned tables were provided by Nikita Malyavin.
This was required by test versioning.rpl,trx_id,row.
Warnings are added to net_server.cc when
global_system_variables.log_warnings >= 4.
When the above condition holds then:
- All communication errors from net_serv.cc is also written to the
error log.
- In case of a of not being able to read or write a packet, a more
detailed error is given.
Other things:
- Added detection of slaves that has hangup to Ack_receiver::run()
- vio_close() is now first marking the socket closed before closing it.
The reason for this is to ensure that the connection that gets a read
error can check if the reason was that the socket was closed.
- Add a new state to vio to be able to detect if vio is acive, shutdown or
closed. This is used to detect if socket is closed by another thread.
- Testing of the new warnings is done in rpl_get_lock.test
- Suppress some of the new warnings in mtr to allow one to run some of
the tests with -mysqld=--log-warnings=4. All test in the 'rpl' suite
can now be run with this option.
- Ensure that global.log_warnings are restored at test end in a way
that allows one to use mtr --mysqld=--log-warnings=4.
Reviewed-by: <serg@mariadb.org>,<brandon.nesterenko@mariadb.com>
binlog_space_limit is a variable in Percona server used to limit the total
size of all binary logs.
This implementation is based on code from Percona server 5.7.
In MariaDB we decided to call the variable max-binlog-total-size to be
similar to max-binlog-size. This makes it easier to find in the output
from 'mariadbd --help --verbose'). MariaDB will also support
binlog_space_limit for compatibility with Percona.
Some internal notes to explain implementation notes:
- When running MariaDB does not delete binary logs that are either
used by slaves or have active xid that are not yet committed.
Some implementation notes:
- max-binlog-total-size is by default 0 (no limit).
- max-binlog-total-size can be changed without server restart.
- Binlog file sizes are checked on startup, or if
max-binlog-total-size is set to a value > 0, not for every log write.
The total size of all binary logs is cached and dynamically updated
when updating the binary log on binary log rotation.
- max-binlog-total-size is checked against existing log files during
serverstart, binlog rotation, FLUSH LOGS, when writing to binary log
or when max-binlog-total-size changes value.
- Option --slave-connections-needed-for-purge with 1 as default added.
This allows one to ensure that we do not delete binary logs if there
is less than 'slave-connections-needed-for-purge' connected.
Without this option max-binlog-total-size would potentially delete
binlogs needed by slaves on server startup or when a slave disconnects
as there are then no connected slaves to protect active binlogs.
- PURGE BINARY LOGS TO ... will be executed as if
slave-connectitons-needed-for-purge would be zero. In other words
it will do the purge even if there is no slaves connected. If there
are connected slaves working on the logs, these will be protected.
- If binary log is on and max-binlog-total_size <> 0 then the status
variable 'Binlog_disk_use' shows the current size of all old binary
logs + the state of the current one.
- Removed test of strcmp(log_file_name, log_info.log_file_name) in
purge_logs_before_date() as this is tested in can_purge_logs()
- To avoid expensive calls of log_in_use() we cache the result for the
last log that is in use by a slave. Future calls to can_purge_logs()
for this binary log will be quickly detected and false will be returned
until a slave starts working on a new log.
- Note that after a binary log rotation caused by max_binlog_size,
the last log will not be purged directly as it is still in use
internally. The next binary log write will purge binlogs if needed.
Reviewer:Kristian Nielsen <knielsen@knielsen-hq.org>
This reverts commit c37b2087b4.
In c37b20887, when re-binlogging a GTID event on a replica,
it will overwrite the thread_id from the primary to be the
value of the slave applier (SQL thread or parallel worker).
This should be the value of the original thread_id on the
master connection though, to both help track temporary
tables, and be consistent with Query_log_event.
Reverting the commit to re-target 11.5, so we can re-test
with the corrected thread_id.
enable ssl + ssl_verify_server_cert in the internal client too
* fix replication tests to disable master_ssl_verify_server_cert
because accounts are passwordless - except rpl.rpl_ssl1
* fix federated/federatedx/connect to disable SSL_VERIFY_SERVER_CERT
because they cannot configure an ssl connection
* fix spider to disable ssl_verify_server_cert, if configuration
says so, as spider _can_ configure an ssl connection
* memory leak in embedded test-connect
